I was wondering if i would be able to add a column in a view that assigns a value to each record and incriments the number each time by 1. Like the way an identity field works in a table.
Is this possible using a view?
Hello all.
I am looking to select all from a particular row where one field occurs more than once. The code i'm, trying isnt working:
select * from U_DATAFILE
where count(group by VIEW_ACTION)>1
Thanks all :)
I have a table with three fileds
1 - SmsTime (datatype = datetime)
2 - MsgCnt (datatype = int)
3 - Message (datatype = varchar)
Here MsgCnt means it will give the number of sms part (70 charector is equal to One SMS).
So in each row MsgCnt may be vary. Some time it may be 1 or 3 or 5 or 2 etc.
Now here I need to count how many MsgCnt is received on Today. Its not to count the rows but counting the MsgCnt fild value.
Is there any sql way to find it.
Plesase help me!
I report SQL Server table information (table names, field names, field datatypes, etc.) to my users using an ACCESS front end. Most of this information exists in the system tables. But I can't find a record count per table in the system tables. What's the fastest way to get a record count for all tables?
View 1 Replies View RelatedI have a table that contains a list of departments (about 50) and another table that contains helpdesk tickets, each record storing the ID of the department sending the ticket. So I'm trying to count how manay tickets per department, I tought of using a subquery and a WHILE cycle but Its just not happening..I sketch up this query:
Code:
WHILE (SELECT MAX(DepartmentID) AS c FROM dbo.tblDepartment) i < i.c
BEGIN
SELECT COUNT(DepartmentID) AS DepartmentCount
FROM dbo.tblTask
WHERE (DepartmentID = @Variable)
END
how could I build this query or what better way of doing the job there are...
Hi,I am struggling with a simple query, but I just don't see it.I have the following example table.Table MessagesID Subject Reply_to1 A 02 Ax 13 A 14 B 05 By 46 C 0The table holds new messages as well as replies to messages.Messages with Reply_to = 0 are top messages, the other messages arereplies to a top message. The subject of a reply message does notnecessarily have to be the same as the subject of the top message.What I would like to have returned is this: a list of messages whereReply_to = 0 and the number of replies to this message.ID Subject Num_replies_to1 A 24 B 16 C 0Any assistance would be greatly appreciated.
View 3 Replies View RelatedI seem to remember reading many moons ago about a function where youcan retrieve a count of the last recordset you opened.For example:I've got a stored procedure that returns a recordset using the TOP 10so I only get the top 10 records. I need to know the recordcount but Idont want to reuse the SELECT statement because its quite complex.Any ideas?What does @@Count do?Thanks in advance
View 1 Replies View RelatedIs there an easy way to count all records in a database?
View 3 Replies View RelatedTable1 contains fields Groupid, UserName,Category, Dimension
Table2 contains fields Group, Name,Category, Dimension (Group and Name are not in Table1)
So basically I need to read the records in Table1 using Groupid and each time there is a Groupid then select records from Table2 where Table2.Category in (Select Catergory from Table1)
and Table2.Dimension in (Select Dimension from Table1)
In Table1 There might be 10 Groupid records all of which are different.
I am trying to count records in my stored procedure. Can someone please help me.
these are the two procedures I am using
Alter Procedure usp_rptQualityReport As
SELECT
tblRMAData.RMANumber,
tblRMAData.JobName,
tblRMAData.Date,
tblFailureReasons.LintItemID,
tblLineItems.Qty,
tblLineItems.Model,
tblLineItems.ReportDate,
tblFailureReasons.FailureReason,
tblTestComponentFailures.ComponentID,
tblTestComponentFailures.FailureCause
FROM
tblRMAData INNER JOIN ((tblLineItems INNER JOIN tblTestComponentFailures ON tblLineItems.ID = tblTestComponentFailures.LineItemID) INNER JOIN tblFailureReasons ON tblLineItems.ID = tblFailureReasons.LintItemID) ON tblRMAData.RMANumber = tblLineItems.RMANumber
WHERE
(((tblFailureReasons.FailureReason) <> N'NONE'))
ORDER BY
tblFailureReasons.FailureReason
Alter Procedure usp_rptQualityReport2 As
exec usp_rtpQualityReport
SELECT
usp_rptQualityReport.RMANumber,
usp_rptQualityReport.JobName,
usp_rptQualityReport.Date,
usp_rptQualityReport.LintItemID,
usp_rptQualityReport.Qty,
usp_rptQualityReport.Model,
usp_rptQualityReport.ReportDate,
usp_rptQualityReport.FailureReason,
usp_rptQualityReport.ComponentID,
usp_rptQualityReport.FailureCause,
(SELECT COUNT(FailureReason) FROM usp_rptQualityReport a WHERE a.FailureReason=usp_rtpQualityReport.FailureReason ) AS groupingLevel
FROM usp_rptQualityReport;
We have an helpdesk sytem on SQL 2000. I am trying to show how much calls have been assigned to each parent category plus it's child categories in a single row. The thing is when I run my query it display parent and child categories and each on it's own rows. I do get the call totals for each row, but I would like to add the totals of the rows together and display it on row. The new table must have then 6 rows (because there is 6 parent categories) with the total of all calls for that parent category, as well as it's childs. Example:
parameter # Calls
------------ --------
desktoppp 5
desktopqq 6 {This is what I am getting at this stage}
desktop t 4
network
r 9
networkgg 10
softwarevv 3
This is what I would like to have:
parameter # Calls
------------ -------
desktop 15
network 19
software 3
Please Help!
is there a way to get a count of records for each table in a database by table in one query? I can query each table using a count, but this is pretty tedious when you have 50+ tables. Anybody have any ideas?
View 4 Replies View RelatedOk, so I need to count the Distinct records from column 1 in which there is not a true value in any of the records for that distinct column 1 number. Here is a short example of my records:dbo_dbWafer_Slicing
dbo_dbWafer_Slicing
WaferID
SawDate
SawRunNumber
Pass
03-157.05
1/8/2008 9:54:00 AM
03-157
0
03-157.03
1/8/2008 9:53:00 AM
03-157
-1
03-157.04
1/8/2008 9:53:00 AM
03-157
0
03-157.02
1/8/2008 9:52:00 AM
03-157
-1
03-157.01
1/8/2008 9:50:00 AM
03-157
-1
03-165.06
1/4/2008 10:46:00 AM
03-165
0
03-165.07
1/4/2008 10:46:00 AM
03-165
0
03-165.04
1/4/2008 10:45:00 AM
03-165
0
03-165.05
1/4/2008 10:45:00 AM
03-165
0
03-165.02
1/4/2008 10:44:00 AM
03-165
0
03-165.03
1/4/2008 10:44:00 AM
03-165
0
03-165.01
1/4/2008 10:43:00 AM
03-165
0
So, how many Distinct SawRunNumbers had no passing wafers? In trying to do this I've come up with:"SELECT COUNT(DISTINCT SawRunNumber) AS BouleCount FROM dbWafer_Slicing WHERE (SawDate >= @MinDate) AND (SawDate <= @MaxDate) AND (Pass = 1) HAVING (COUNT(DISTINCT WaferID) > 0)" but that doenst work. It still counts records where pass = 0 for distinct SawRunNumbers even if one record within that SawRunNumber is passing. From the above sample data I should get a result of 1 not 2 or 3. Can I do this with this set of data? I'm using SQL Server 2005 EE.Thanks for your help.
I am trying to create a very simple view to associate the EVP from an HR data table (TBLCCINFORMATIONFEBRUARY04) of 65,000 records with the entries in a lost savings table (TBLCCYEARTOTALS) of 1,939 records. This is the View query:
SELECT dbo.TBLCCYEARTOTALS.*, dbo.TBLCCINFORMATIONFEBRUARY04.EVPREPORTNAME AS EVPREPORTNAME
FROM dbo.TBLCCYEARTOTALS INNER JOIN
dbo.TBLCCINFORMATIONFEBRUARY04 ON dbo.TBLCCYEARTOTALS.VPAWID = dbo.TBLCCINFORMATIONFEBRUARY04.VPAWID
The view is returning 2,516,488 records, and I can see the same data repeating over and over again. What am I doing to create these additional records?
Thanks!
My table has got 67K records but the tool is showing just 100 records other records are getting truncated. Now what i have to do in SQL statement to view the other records starting from 100 to 1000?
View 2 Replies View RelatedHi, I have two view (Run1OnlyFailures and Run2OnlyFailures). THey share exact same columes. Run1OnlyFailures has three records and Run2OnlyFailures has 5 records. Is there any way that I could put all 8 (3+5) records into a third view BothRunFailures, which share the same columns defination as Run1OnlyFailures and Run2OnlyFailures?
Thx
Tao
I have a view that will return say 5000 records when I do a simpleselect query on that view like.select *from vw_test_viewHow can I set up my query to only return a certain # of records, saythe first 300?Here is what is going on, we have a large amount of data that returnsin a view and we need to work with all of it eventually, However wewant to do it in chunks. So my thoughts were as follows:1. To run a query to return X amount of the total data for us to workwith.2. Update these records with a flag in a table that the vw_test_viewfilters out.3. The next time I run the query to pull data from the view it willskip the records that I have already looked at (because of step 2) andpull the next X amount of records.Thanks in advance,Mike
View 3 Replies View RelatedId account num acc_type
42 1376200071278 gl
42 1308111111111 ic
42 1291111111111 os
34 1245200000000 gl
34 1132485111111 ic
this is table structure.there are multiple records like this in a table . I need output as
id gl accountnum ic accountnum osaccountnum
42 1376200071278 1308111111111 1291111111111
34 1245200000000 1132485111111 -
I have a spreadsheet that we download from one of our customers that contains Sales Order Release information. The spreadsheets contains 1-n releases per part #.
I have a SQL 2000 view that groups this information into a smaller table (after importing into SQL).
I need to take this view and create 1-n release records based on our production run qty and put it in a new table. I have a field in my view that contains the desired # of records to create.
Since I never used TSQL to loop through table/view, how do I do this. Following is what the output should look like:
From SQL view
---------------------------------------
Part #: 11124A1
Qty Due:175
Run Qty: 50
# Release to Generate: 4
Output to Table
----------------------
Part # QtyDue RunQty
----------------------------------------------------
11124A1 50 50
11124A1 50 50
11124A1 50 50
11124A1 25 50
Note QtyDue is the production run qty, with the last record containing the remaining QtyDue from view's Qty Due
I've been looking through permissions to see if it's possible to grant a user permission to see only certain records from a table.
For example:
I'm granting users to view records in the table 'Sales', but I only want the users to see their respective data.
User A should only be able to see Sales where Sales.Location = 1
User B should only be able to see Sales where Sales.Location = 2
... and so on.
I believe I've read this is possible, but in looking through the permissions you can define, I've only found where you can limit the columns a user sees, not records.
Anyone have any ideas or did I just remember something wrong?
I'm a new user to vwd. If I use a details view control on my page, I have noticed that the "New" link is not visible unless there is at least one record in the table. Is there any way of making it visible where there aren't any records?My web pages are currently hosted at vwdhosting. I have uploaded my database with the record structure onto the web site and I am using a remote connection string to access it. I have had users updating data in another table on the remote database. If I add records to my new table locally and upload the database to the remote site, all the data that my users have been adding will be lost. So, if I can't add my first record using a control on my web page when there are no records in the table, should I be doing it programmatically? If so, how?Thanks,Julie
View 2 Replies View RelatedI have a table like the followingField1 Field2 Field3------ ------- ------x1 y1 z1x1 y2 z2x1 y3 z3x1 y4 z4x2 y1 z5x2 y2 z6x2 y3 z7x2 y4 z8x3 y1 z9............and so onI want to create a view with x1, x2, x3.. as uniquerecords; y1, y2, y3.... as fields; and z1, z2, z3.... as the valuesWhen I doCREATE VIEW xyz (y1, y2, y3, y4) ASSELECT field1 ,( SELECT field3 FROM table WHERE field2 = 'y1'),( SELECT field3 .....FROM tableI get the error that the sql query creates duplicate values. I think Imay have to do a join using distinct values of field1. I was lookingfor some guidance with the join.Thanks for your help in advance(using SQLSERVER 2000)
View 2 Replies View RelatedHi all,
sorry for this question, but I am brand new with SQL Server 2005 Express.
I have nothing found in the documentation.
With which tool can I view the data records in my SQL Server?
I have tried with MS SQL Server Management Studion Express but had no success.
thanks for help
hawk
We have a third party application and wish to create a report based upon a view.
The strange thing is logged in to the server as a SQL SYSAdmin account, we cannot view the data via the view. SQL Admin accounts are setup correctly and there is nothing different on this particular server. No errors are returned just a blank view with no records.
Could this be a permissions problem or orphaned schemas in that particular database? I thought SYSAdmin could view and do just about anything and the people who use this particular database would not have the know how on denying permission to the SYSAdmin role.
Thanks
N
Hi,
I have few views in SQL Server 2005. In Design View, the results of View are ok. In OPEN VIEW option, records are not sorted correctly, ORDER BY is ignored.
What could be the reason for this ?
Thanks a lot in advance!
i have a stored procedure with one coming id parameter
Code BlockALTER PROCEDURE [dbo].[sp_1]
@session_id int
...
and a view that holds these @session_id s to be sent to the stored procedure.
how could i execute this sp_1 in a select loop of the view. I mean i want to call the stored procedure as times as the view has records with different ids.
I want to create a view to get records from multiple tables. I have a UserID in all the tables. When I pass UserID to view it should get records from multiple tables. I have a table
UserInfo with as data as
UserID=1, FName = John,
LName=Abraham and Industry = 2. I have a
Industry table with data as
ID=1 and Name= Sports,
ID =2 and Name= Film.
When I query view where UserID=1 it should return record as
FName =John,
LName = Abraham and
Industry= Film
How to write query?
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
I want to show more records in each page when i view report
Question is subject above
any idea? thanks
When I have made a query with IDC, how can I make a counter in the .htx-file, which tells me if there was no query-results ?
View 2 Replies View RelatedHi,New to SQL. Got some questions about it.Suppose I have two tables. Each of them has a single column, named asc1. For table T1, I have:11133579For table T2, I have:1234513The exercise I want to do is to select the number of occurence in T1for those elements in T2. For above tables, I want to show:1 3 ( i.e. "1" is in T2 and shows 3 times in T1)2 0 (i.e. "2" is in T2 but doesn't show in T1)3 2 (i.e. "3" is in T2 and show 2 times in T1)It seems I can't figure out a good way to do this. Any help will beappreciated.Thanks
View 2 Replies View Related
I am working on writing a query to use with Reporting Services where I am pulling grades from a school grade book trying to see what students qualify for Honor Roll.
I have one Honor Roll done but am still working on the other. The qualifications I am trying to get is that a student has a gpa >3.0 and can have one C grade. I've got the 3.0 and the C's down but how to get the query to pull anyone having at the most one C. It doesn't matter whether it is C+, C, or C- but the student can't have more than a count of one.
Here is what I have
SELECT DISTINCT s.lastname+','+' '+s.firstname AS Student, s.studentnumber,e.grade,t.name AS Term,
gs.score, c.name AS Course, se.teacherdisplay
FROM GradingScore gs
INNER JOIN student s ON s.personid = gs.personid
INNER JOIN v_TermGpa tg ON tg.personid = s.personid
INNER JOIN enrollment e ON e.enrollmentid = s.enrollmentid AND e.calendarid = gs.calendarid
INNER JOIN scheduleStructure ss ON ss.calendarid = gs.calendarid
INNER JOIN Termschedule ts ON ts.structureid = ss.structureid
INNER JOIN Term t ON t.termscheduleid = ts.termscheduleid
INNER JOIN section se ON se.sectionid = gs.sectionid
INNER JOIN course c ON c.courseid = se.courseid
WHERE gs.calendarID = 20 AND t.name ='1st 6wk' AND tg.term1gpa >=3.0 AND s.enddate IS NULL
AND gs.score <='C-'
AND (select gs1.personid, gs1.score
from gradingscore gs1
inner join enrollment e1 on e1.personid = gs1.personid
Inner join schedulestructure ss1 on ss1.calendarid = e1.calendarid
Inner join termschedule ts1 on ts1.structureid = ss1.structureid
Inner join term t1 on t1.termscheduleid = ts1.termscheduleid
where gs1.score IN('C','C+','C-') and (count(score)= 0 or count(score) < 2))
ORDER BY s.[student]
I can get it to work all the way up to where the And (count(score) starts then there is something about the way the count is in there that I haven't figured out yet.
Thanks in Advance for any help or advice
Hi,
How do I count the total number of each row in a table? The table Company has a field called Group. How do I count the total amount of members in each group?
Thanks in advance!