Creat Server Using Sql Server 2005
Jun 5, 2006
hi
i want to creat server using sql server 2005
and connect the server with clients (computers)
my question is :
1-must be the server computer using OS Windows Server
2-which book you advice me to read for creat server using SQL Server 2005 database
thank you
View 2 Replies
ADVERTISEMENT
Nov 20, 2003
I am new to ASP.NET and met a problem about access a database on a Web Server (www.myserver.com). My meaning here that I created a .sql from my localhost to test, but when to upload to my web server on the internet, an error occured: "System.Data.SqlClient.SqlException: SQL Server does not exist or access denied".
Anyone here can help me to solve my problem. Waiting for your reply soon. Thanks
View 2 Replies
View Related
Dec 3, 2006
Hello all,
I've Installed VS2005 and MSSQL express with it. I used to work with mssql 2003 enterprise edition where it had "Enterprise Manager" from which I could create and modify my Databases.
How do I creat a new database with MSSQL express?
I've tried to do this via visual studio 2005 "server explorer". I"m entering the "Create new SQL Server Database" dialog, I select my server's name and my new database name and I recive an error message which says "An error has occurred while estabilishing a connection to the server" and it also says that
"When connecting to SQL server 2005, this failure may be caused by the fact that under the defult settings SQL sever does not allow remote connections".
How do configure my MSSQL express to allow the remote connection?
Thanks in advance!
View 5 Replies
View Related
Dec 1, 2007
I have a DataBase name Customer
Customer have 30 Tables name table1 �table2�table 3...
I want to have a DataBase name Customer_Offile with same Table same column like Customer ( the Customer_Offlike will used to a backup DataBase)
How to wirte a script for copy Customer?
thank you very much
View 3 Replies
View Related
Jun 3, 2006
Kindly provide me the creat table querry for MS sql
its urgent.
Thank you!
View 1 Replies
View Related
May 11, 2006
We're new to SQL Reporting Services and have a new SQL 2005 server.
I'm having a problem activating scubscriptions.
- "New Subscription" is greyed out in Server Management Studio.
- Subscribing via the browser, even as the Content Manager, allows you to fill in the form for the subscription but then reports the following error;
"The current action cannot be completed because the user data source credentials that are required to execute this report are not stored in the report server database. (rsInvalidDataSourceCredentialSetting)"
Any suggestions?
Found the problem.
When configuring the Data Source the "Impersonate the authenticated user after a connection has been made to the data source" button should be off.
View 3 Replies
View Related
Apr 29, 2007
What if I attempt to creat a (merge) publication while the production sql server is online and active?
From another point of view, is there any drawback if I try to create (merge) publication while the tables are being used by users?
Thanks
Ekrem Önsoy
View 5 Replies
View Related
Feb 23, 2008
Hello
This code was translated from c# but I keep getting this error.
The variable name '@UserId' has already been declared. Variable names must be unique within a query batch or stored procedure
Any ideas I have tried changing the user id name but no luck. thanks
Partial Class userInherits System.Web.UI.Page
Protected Sub CreateUserWizard1_CreatedUser(ByVal sender As Object, ByVal e As System.EventArgs) Handles CreateUserWizard1.CreatedUser
Dim UserNameTextBox As TextBox
UserNameTextBox = CreateUserWizardStep2.ContentTemplateContainer.FindControl("UserName")Dim DataSource As SqlDataSource = CreateUserWizardStep2.ContentTemplateContainer.FindControl("InsertExtraInfo")
Dim user As MembershipUser = Membership.GetUser(UserNameTextBox.Text)Dim UserGUID As Object = user.ProviderUserKeyDataSource.InsertParameters.Add("UserId", UserGUID.ToString())
DataSource.Insert()
End Sub
End Class
View 4 Replies
View Related
Feb 19, 2007
Hi,
we have three dabases:
1. Two localDatabases in two offices, Main Office & Branch Office, each office in a diffrent city!!
2. One remoteDatabes exist in on the internet server.
all of it are with the same exact architecture, we are planning to upload and download to & from remoteDatabase to get the same data in all of them.
any available solution to do this with SQL Server 2005 ?
View 3 Replies
View Related
May 1, 2008
I am tryung to create a indexed view..
CREATE VIEW vwLookAdmissionRecord
WITH SCHEMABINDING
AS
select episode_key as episode_key, ee.object_key, ee.encounter_begin_dt , cp.procedure from dbo.encounters e
join (
select episode_key as minepisode, min(isnull(e.object_key,e.Object_key_History) ) as object_key, min(e.encounter_begin_dt)as encounter_begin_dt
from dbo.encounters e
join dbo.CD_Procedure CP on CP.Procedure_CD = e.procedure_cd
where cp.procedure > 0
group by e.episode_key
)ee on e.object_key = ee.object_key
join dbo.cd_procedure cp on cp.procedure_cd = e.procedure_cd
CREATE UNIQUE CLUSTERED INDEX IDX_V1
ON vwLookAdmissionRecord (episode_key)
but i keep getting an error:
annot create index on view "dbo.vwLookAdmissionRecord" because it references derived table "ee" (defined by SELECT statement in FROM clause). Consider removing the reference to the derived table or not indexing the view.
How can I fix this?
View 11 Replies
View Related
May 15, 2008
Hi, I already got a database and I need to add another stored procedure on it in order to call it from the SSIS package.
But when I execute the sql file to create the procedure, there is a error message popping out like:
"Cannot add rows to sys.sql_dependencies for the stored procedure because it depends on the missing table 'logit'. The stored procedure will still be created; however, it cannot be successfully executed until the table exists."
And I have tried it on another computer, there is the same error. Could you please tell me how to solve the problem. Thanks very very much.
View 4 Replies
View Related
Apr 20, 2007
My server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
View 8 Replies
View Related
Feb 23, 2006
I have a Table Name "Forums". I want to ceate an AFTER-Trigger on it. It will execute when ever a new row is inserted to "Froums" Table.
Here is what I did but It needs to be corrected:
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
ALTER TRIGGER CreateTopicsTableTrigger
ON dbo.Forums
AFTER INSERT
AS
SET NOCOUNT OFF
DECLARE @myNewForum varchar
CAST(@@ROWCOUNT as varchar) /*Is it OK???*/
SET @myNewForum=@myNewForum+@@ROWCOUNT /*Here I dont know how assigments work in SQL*/
GO
CREATE Table @myNewForum /*Will this work some how???*/
( TopicID int IDENTITY NOT NULL, TopicTitle varchar(50) , CreatedBy varchar(50) ,
DateCreated DateTime , DateLastUpdate DateTime , LastUpdateBy varchar(50) )
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
View 5 Replies
View Related
Sep 3, 2007
I installed Visual Studio 2005 Professional then after that was installed and running, I tried to install the the SQL Server 2005 Developer's Edition which installed but I do not get the SQL Server 2005 Studio Manager. I have remove and reinstalled but it never gets installed. Any ideas?
Chuck
View 4 Replies
View Related
Jan 21, 2008
We have been using Sql Server 2005 Compact Edition 3.1 RDA synchronization method successfully on Sql Server 2000 database. Recently we moved the database to Sql Server 2005, sync doesn't work anymore, it just hangs on one table. On further investigation, we found out that it's the index on that table that causes this. We removed the index, it works fine. We are wondering the root cause, removing the index is not a solution for us. Any thoughts?. Thanks.
View 1 Replies
View Related
Feb 22, 2008
(1) I have already installed of SQL Server 2005 Developer Edition first.
(1) Can I install visual studio 2008 without the 2005 express edition of SQL server? Will be any problems because I don't have express edition of SQL server? Do I need to install the express edition of SQL server as well?
(3) How to use SQL Server 2005 Developer Edition instance on visual studio 2008?
View 3 Replies
View Related
Aug 10, 2007
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
View 1 Replies
View Related
Aug 10, 2007
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
View 5 Replies
View Related
Aug 8, 2006
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
View 11 Replies
View Related
Jun 5, 2006
I
am trying to install SQL 2005 in a 2-node virtual Windows 2003 cluster. I set
the cluster up through Virtual Server 2005 with 2 virtual nodes and one
virtual domain. The nodes can connect to each other as well as the
physical machine. When I try to install a fresh copy of SQL 2005 on my
cluster, I get an error every time. The
error stops the installation while checking system configuration after
installing prerequisites. The log file entry is as follows:
*******************************************
Setup Consistency Check Report for Machine: --SERVERNAME--
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: Warning
Description:
IIS is not installed, therefore Report Server feature will be disabled
Action: Install IIS in order for Report Server feature to be enabled
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
1
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run:
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache
Source File Name: datastoreclusterinfocollector.cpp
Compiler Timestamp: Fri Sep 16 13:20:12 2005
Function Name: ClusterInfoCollector::collectClusterVSInfo
Source Line Number: 883
----------------------------------------------------------
Failed to detect VS info due to datastore exception.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
----------------------------------------------------------
Failed to find a cluster group that owned shared disk: J:
WinException : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
View 3 Replies
View Related
Jul 23, 2007
I have a SQL Server 2005 evaluation that has already been installed and setup on a server. I believe it originally had a 180 day eval. There have been numerous databases and users added as well as maintenance plan created...
The eval was put on the machine as an interim solution while waiting for paper work and order processiing things to happen. All the paperwork and ordering... have been completed and I now have the real SQL Server 2005 Standard Edition license key ....
I am very new to SQL Server and need to determine ...
1. Can I update the eval copy to become permanently licensed?
2. Would I want to upgrade the eval to permanent? Will I lose any capabilities by keeping the current eval setup?
If it is reasonable to keep the eval setup
3. How do I go about entering the license key to make it permanent?
If it is necessary to install the new Standard Edition...
4. How do I install it while maintaining the already defined databases, data, users, maintenance plan...
Thanks in advance for any and all help.
Chris
View 5 Replies
View Related
Aug 12, 2007
Hi,
I am developing an application for pocket pc 2003 smart device which utilizes synchronization between SQL CE 2005 and SQL server 2005 by means of REMOTE DATA ACCESS method call PULL( ) and PUSH( ) but currently these are the details of the error Im encountering when PULL( ) method is called:
Error code: -2147467259
Descripion: An error occured on the computer running IIS.Restart the IIS server.
Minor error: 28022
Source: SQL server CE
Currently Im developing this application as a final project and due to some limitations I have setup my pc to act as the SQL server and the IIS server both on the same machine.
Any help will be appreciated, thanks.
View 5 Replies
View Related
Feb 13, 2008
When I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that
we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.
Questions:
1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server?
2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC. Any expected
problems when running both 2000 and 2005 SQL Server at the same database server?
3. What is the best configuration for running SQL Server 2005 when we have old 2000 databases? Upgade or not upgrade?
TIA,
Jeffrey
View 4 Replies
View Related
Sep 20, 2006
When I try to migrate a database on a SQL Server 2000 server to a SQL Server 2005 server with the Copy Database Wizard of the SQL Server Management Studio, I'm confronted with the following problem;
Performing operation...
- Add log for package (Success)
- Add task for transferring database objects (Success)
- Create package (Success)
- Start SQL Server Agent Job (Success)
- Execute SQL Server Agent Job (Error)
Messages
* The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
When I take a look at 'Event viewer' on the SQL 2005 server, the following error is displayed;
InnerException-->An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005,
this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I already enabled the MSSQLSERVER network configuration protocols (TCP/IP and Named Pipes ).
How do I solve this problem?
View 9 Replies
View Related
Jan 22, 2008
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
View 4 Replies
View Related
Mar 24, 2007
Hello,If I backup and restore an express database to sql server 2005 standard, will there still be limitations in regards to the database size, cpu...etc.? Thanks,Jon
View 1 Replies
View Related
Dec 16, 2005
Do you now, How can I move database with datas to release version of sql server?
Procedores backup/restore can't help becouse of unsuported version database.
Any ideas?
View 2 Replies
View Related
Feb 18, 2008
How do I upgrade Sql Server 2005 Express to SP2 if I also have SQL Server 2005 Enterprise SP2 already on the same box? I installed Sql Server 2005 Enterprise first, then applied SP2, then installed Visual Studio 2008 (which installed SQL Server 2005 Express).
When I try to upgrade Sql Server 2005 Express to SP2 using the special Express edition of SP2, I get an error message that says "None of the selected features can be installed". I end up having to cancel the install of SP2.
I'm left with SQL Server 2005 at level 9.0.3054 and SQL Server 2005 Express at 9.0.3042. How can I bring SQL Server Express 2005 to the same level as SQL Server 2005 Entperprise?
View 2 Replies
View Related
Mar 29, 2007
Hello!! How can I upgrade from SQL Server 2005 Express Edition to SQL Server 2005 Enterprise Edition? I see allot of example of upgrading from SQL Server 2000 to SQL Server 2005, but no example on upgrading from SQL Server 2005 Express to SQL Server 2005 Enterprise or Standard. Is this possible?
View 6 Replies
View Related
Sep 30, 2007
I need to install SQL Server 2005 Standard Edition on a new Windows Server 2003 machine that has SQL Server 2005 Express Edition installed by a backup application (Backup Exec). Will I need to uninstall the express edition in order to install the standard edition? Can the two coexist as separate instances or will the standard edition installation simply upgrade the express installation?
Thanks
View 3 Replies
View Related
Nov 5, 2007
I'm really new to the whole database deal (as well as VB.net) - specifically with the capabilities surrounding VB and SQL Server 2005. My question is open to any recommendations...
What I have is an application that a user uses to create 'new' products. They are presented a form to enter the information regarding the product they wish to create. They enter the details of the product and also locate an image that represents the product, too. Currently, this application saves the product information (including binary image data) into a SQL Server 2005 Express Edition database. This application and database reside on a client pc. What I need to do is to be able save updated and newly created product data into a file of some sort. That file will make its way to a memory stick (USB) and then be transported to a 'field' machine. Quite simply, what is the best way to do this? Are there walk-throughs on this sort of thing? The target database is also SQL Server 2005. I thought I'd post this question on here to get the best design ideas... Any help would be greatly appreciated.
~javasource
View 1 Replies
View Related