Trying to create a view in SQL Server 2014, like
create view test
as
select billno, CONVERT(char(10), billdt, 103) from BILL
but view not created, error
Msg 4511, Level 16, State 1, Procedure test, Line 8
Create View or Function failed because no column name was specified for column 2.
Write a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID
[code]...
I need to create a view of a sql table, but change the data types. I knowthe syntax below is not correct, and can't figure out if it is wrong or ifyou just can't do this. I have only created views before with the same datatype.CREATE VIEW F0005New(DRKY nchar(3), DRDL01 nchar(30))INSERT (SELECT rtrim(F0005.DRKY), F0005.DRDL01FROM F0005 AS F0005WHERE DRSY = '41' AND DRRT = 'S1')Thanks!!
View 4 Replies View RelatedWe have two databases with same schema and tables (same table names, basically main DB and a copy of the main DB). following is example of table names from 2 DBs.
CREATE TABLE #SourceDatabase (SourceColumn1 VARCHAR(50))
INSERT INTO #SourceDatabase VALUES('TABLE1') , ('TABLE2'),('TABLE3') , ('TABLE4'),('TABLE5') , ('TABLE6')
SELECT * FROM #SourceDatabase
DROP TABLE #SourceDatabase
CREATE TABLE #ArchiveDatabase (SourceColumn2 VARCHAR(50))
INSERT INTO #ArchiveDatabase VALUES('TABLE1') , ('TABLE2'),('TABLE3') , ('TABLE4'),('TABLE5') , ('TABLE6')
SELECT * FROM #ArchiveDatabase
DROP TABLE #ArchiveDatabase
We need a T_SQL statement that can create one view for each table from both the databases(assuming both databases have same number of tables and same table names). so that we can run the T_SQL on a thrid database and the third DB has all the views (one view for each table from the 2 DBs). and the name of the view should be same as the tables name. and all 3 DBs are on the same server.
the 2 temp tables are just examples, DBs have around 1700 tables each. so we ned something like following for each table.
CREATE VIEW DBO.TABLE1 AS SELECT * FROM [SourceDatabase].[dbo].[TABLE1] UNION ALL SELECT * FROM [ArchiveDatabase].[dbo].[TABLE1]
CREATE VIEW DBO.TABLE2 AS SELECT * FROM [SourceDatabase].[dbo].[TABLE2] UNION ALL SELECT * FROM [ArchiveDatabase].[dbo].[TABLE2]
CREATE VIEW DBO.TABLE3 AS SELECT * FROM [SourceDatabase].[dbo].[TABLE3] UNION ALL SELECT * FROM [ArchiveDatabase].[dbo].[TABLE3]
CREATE VIEW DBO.TABLE4 AS SELECT * FROM [SourceDatabase].[dbo].[TABLE4] UNION ALL SELECT * FROM [ArchiveDatabase].[dbo].[TABLE4]
CREATE VIEW DBO.TABLE5 AS SELECT * FROM [SourceDatabase].[dbo].[TABLE5] UNION ALL SELECT * FROM [ArchiveDatabase].[dbo].[TABLE5]
CREATE VIEW DBO.TABLE6 AS SELECT * FROM [SourceDatabase].[dbo].[TABLE6] UNION ALL SELECT * FROM [ArchiveDatabase].[dbo].[TABLE6]
Hi All,
I'm trying to create a proc for granting permission for developer, but I tried many times, still couldn't get successful, someone can help me? The original statement is:
Create PROC dbo.GrantPermission
@user1 varchar(50)
as
Grant create table to @user1
go
Grant create view to @user1
go
Grant create Procedure to @user1
Go
Thanks Guys.
I have a table like below:
ItemIdAmountTax1Tax2SrvType
111 100 10 20 1
112 200 10 2
113 300 10 30 3
Now I want to create View that will have an exploded resultset based on SrvType.
For SrvType 1 and 2 there will be 2 lines per Itemid - One for 'Amount' anod another for 'Tax1+Tax2'. But for SrvType 3 there will be 3 lines per 'ItemId' - one for 'Amount', one for Tax1 and another for 'Tax2'.
I have a few hundred source records like this. Now sure how to achieve the exploded resultset with a View.
I like to create an SQL view to divide amount 300,000 between 12 month starting from Month July 2014 to June 2015 as shown below
Amount Month Year
25,000 July 2014
25,000 August 2014
25,000 September 2014
25,000 October 2014
25,000 November 2014
25,000 December 2014
25,000 January 2015
25,000 February 2015
.
.
.
.
25,000 June 2015
Hi,
I have currently a problem with setting up the permissions for some developers. My configuration looks like this.
DB A is the productive database.
DB B is a kind of "development" database.
Now we have a couple of users call them BOB, DAVID, ...
who are members of the db role db_reader and db_writer for the productive db a but they should be allowed to do nearly everything on db b.
Therefor I added them to the db role db_owner for db b.
For testing purposes I tried to "CREATE" a view TEST as BOB in database B but I received the error message
'Msg 262, Level 14, State 1, Procedure Test, Line 3
CREATE VIEW permission denied in database 'b'.'
I cross checked the permissions on db level and I even granted all available permissions on db level but nevertheless I receive this error message.
What's my mistake?
Of course it worked fine when I give them sysadmin rights but then they have far too much permissions.
Regards,
Stefan
I had given one of our developers create view permissions, but he wants to also modify views that are not owned by him, they are owned by dbo.
I ran a profiler trace and determined that when he tries to modify a view using query designer in SQLem or right clicks in SQLem on the view and goes to properties, it is performing a ALTER VIEW. It does the same for dbo in a trace (an ALTER View). He gets a call failed and a permission error that he doesn't have create view permissions, object is owned by dbo, using both methods.
If it is doing an alter view how can I set permissions for that and why does it give a create view error when its really doing an alter view? Very confusing.
When I use following command it works fine.
CREATE VIEW dbo.[ikw_custom]
AS
SELECT * FROM rns_keyword.dbo.ikw_custom
but if I use following command with condition it gives me an error.
if not exists(select * from sysobjects where name ='ikw_custom' and type='V')
begin
CREATE VIEW dbo.[ikw_custom]
AS
SELECT * FROM rns_keyword.dbo.ikw_custom
end
help will be appriciated.
Thanks in advance
-Balbir
I am learning how to work with MSSQL
here is what I like to do
I have a table with URLs like this "www.urls.com" I need to create a view that will insert this "http://" before "www.urls.com" can some please let me know what I need to do
Thank you
Hello All;
I'm new to SQL, and developing my first application using SQL 2000 as the back end for my data.
Can anyone tell me if I can create an SQL View from VBA?
I'm trying to create a data view that access various records from a single table, and it has to distribute that data 2 14 different subforms, representing different days in a 2 week period, which is distingiushed by a field called "Day", that is numbered from 1 to 14.
I also have a summary subform that has the weekly summary (days 1 to 7 and 8 to 14) on seperate subforms. In total I have 16 subforms, which actually source from a single table, just split depending on the day in the period.
As I see it now, creating views iis the best way for me to go, but I also have to be able to change the period id on the fly, so I'm think I have to use VBA to generate these views.
Does any of this make sense, and am I on the right track??
hi,if the below query
select DISTINCT group_module_menu_info.menulink FROM
user_group_role_info,group_role_module_info,group_ module_menu_info
where user_group_role_info.userid=user_table.userid and
((group_module_menu_info.moduleid = user_group_role_info.moduleid)OR
(user_group_role_info.roleid=group_role_module_inf o.roleid and
group_module_menu_info.moduleid = group_role_module_info.moduleid))
if i want to create a view
how ?
thank you!
Create a view showing every order that was shipped to Spain. Name the destination column "DestinationSpain". Include code that checks if the view already exists. If it does, it should be dropped and re-created.
Use Northwind
Go
DROP VIEW Spain_Orders
Go
CREATE VIEW Spain_Orders
AS
SELECT *
FROM Orders
WHERE ShipCountry = 'Spain'
this is what I get.
server: Msg 3701, Level 11, State 5, Line 1
Cannot drop the view 'Spain_Orders', because it does not exist in the system catalog.
albanie
I know IIf doesn't exist in SQL. However, I am creating a view and want to check the value of a field and if it is 1 the field returns 'This value' if it is 2 then 'That value' , if 3 then 'Another value'.
How can I do this ?
Hi Gurus,I'm a beginner. Would you please tell me if it's possible to create a viewhaving a calcuated column based on the condition of the column on the sqltable.create view vwImaging ASselectEmpID, LastName, FirstName, EmpTag = 'Act' ifFROM tblPerPayI have a table EMP:SSN (char 9)A view giving a formatted SSN (XXX-XX-XXXX,) a--Message posted via http://www.sqlmonster.com
View 3 Replies View RelatedHi.I created a simple view with the following statements:CREATE VIEW dbo.VIEW1ASSELECT dbo.VIEW_ALL.ID,dbo.VIEW_ALL.Code,Another.dbo.OTHER_VIEW.Label as SpecialCodeFROM dbo.VIEW_ALL LEFT OUTER JOINAnother.dbo.OTHER_VIEW ON(dbo.VIEW_ALL.Code + '_0') = Another.dbo.OTHER_VIEW.LabelWhen I run :select * from VIEW1 where code = 'abcde',I would get all 10 rows that are of the same data where the code is'abcde'. But what I thought it should return is really just one rowsince the rest of the 9 rows are exactly the same! I know that I canget my result if I useselect DISTINCT * from VIEW1 where code = 'abcde'But, is there any way I could change my SQL statements(CREATE VIEW)above so that I automatically get 1 row instead of 10 rows of exactlythe same value without using DISTINCT?Thank you for any help.
View 7 Replies View RelatedI have a table in my program which going all the invoices,and I want to create a view where I can see the quantity of the products as many times by 1 as the quantity in the invoice:
Invoice:
Product name quantity
woods 3
at the view
woods 1
woods 1
woods 1
Thank you.
how to create view in sql server 2005 that recognize Identity And Primary key of base table
View 2 Replies View RelatedGood afternoon,
I have a user that needs read only access to all tables in a particular database - Which is working fine.
He also needs to create views, as well as the above, but nothing else.
Is this possible?
Many thanks.
CREATE VIEW getUsedColumns AS SELECT * FROM (SELECT DISTINCT attr FROM iba UNION SELECT DISTINCT attr FROM new_iba) WHERE attr != 0;
its working with oracle
how to chenge in t-sql
thanx
Hey guys, im really new ASP.net. I just upsized my access database to SQL Server Express and I'm trying to mimic some view functionalitty I had in access. I think they call it the expression builder.So bassically Im trying to make a column that does some calculations on other columns. Like:if columnA-columnB > 100 then columnC='YES' else columnC='NO'Does anyone know how to do this? I want to add this column in a view. Can i perhaps just do it in the datagrid? I'm so frusterated at the moment, ive been trying for about 3 hours!Thanks in advance for your help.
View 1 Replies View RelatedI need to create view from the results of executing dynamic SQL.Query like this have incorrect syntax: CREATE VIEW vModuleCatalogObjectValues AS EXECUTE sp_executesql @sql, @paramDefinition, @moduleId; ENDWhat i need to do to get it work?!
View 1 Replies View RelatedHi,
Is there a way you can give a user a permission to "Create View" only but not to create other objects like tables or SP's in a database.
Thanks
Hi,
I tried to create a view on following 4 tables with two different syntaxes. One with ANSI syntax and other with conventional(using WHERE clause). Both SELECT work fine and return same result sets. Views are created in both cases. SELECT from Conventional_View works fine But SELECT from the ANSI_View returns error message without Error Number as :
'DB-Library Process Dead - Connection Broken'
CREATE TABLE dbo.SILT01 (
SILF01A varchar (8) NOT NULL ,
SILF01B varchar (25) NULL ,
SILF01C smallint NULL ,
CONSTRAINT SILT01_PK PRIMARY KEY CLUSTERED
(SILF01A)
)
GO
CREATE TABLE dbo.SILT19 (
SILF23A varchar (8) NOT NULL ,
SILF01A varchar (8) NOT NULL ,
CONSTRAINT aaaaaSILT19_PK PRIMARY KEY CLUSTERED
(
SILF23A,
SILF01A
)
)
GO
CREATE TABLE dbo.SILT20 (
SILF23A varchar (8) NOT NULL ,
SILF15A varchar (8) NOT NULL ,
SILF01A varchar (8) NOT NULL ,
CONSTRAINT aaaaaSILT20_PK PRIMARY KEY CLUSTERED
(
SILF23A,
SILF15A,
SILF01A
)
)
GO
CREATE TABLE dbo.SILT23 (
SILF23A varchar (8) NOT NULL ,
SILF23B varchar (30) NULL ,
SILF23C varchar (40) NULL ,
SILF23D varchar (8) NULL ,
SILF23E varchar (1) NULL ,
SILF23F text NULL ,
SILF23G varchar (25) NULL ,
SILF23H varchar (8) NULL ,
SILF23I varchar (25) NULL ,
SILF23J varchar (25) NULL ,
SILF23K text NULL ,
SILF23L varchar (25) NULL ,
SILF23M varchar (8) NULL ,
SILF23N varchar (25) NULL ,
SILF23O varchar (25) NULL ,
SILF23P text NULL ,
SILF23Q varchar (25) NULL ,
SILF23R varchar (8) NULL ,
SILF23S varchar (25) NULL ,
SILF23T varchar (25) NULL ,
SILF23U varchar (15) NULL ,
SILF23V varchar (15) NULL ,
SILF23W varchar (15) NULL ,
SILF23X varchar (15) NULL ,
SILF23Y varchar (15) NULL ,
SILF23Z varchar (15) NULL ,
SILF23A1 varchar (15) NULL ,
SILF23A2 varchar (15) NULL ,
SILF23A3 varchar (15) NULL ,
SILF23A4 varchar (15) NULL ,
SILF23A5 varchar (15) NULL ,
SILF23A6 varchar (3) NULL ,
CONSTRAINT aaaaaSILT23_PK PRIMARY KEY CLUSTERED
(
SILF23A
)
)
GO
create view ANSI_View as
SELECT DISTINCT SILT01.SILF01A, SILT23.SILF23A,
SILT23.SILF23B, SILT20.SILF15A
FROM ((SILT01 INNER JOIN SILT19 ON SILT01.SILF01A = SILT19.SILF01A)
INNER JOIN SILT23 ON SILT19.SILF23A = SILT23.SILF23A)
LEFT JOIN SILT20 ON (SILT19.SILF01A = SILT20.SILF01A) AND
(SILT19.SILF23A = SILT20.SILF23A)
create view Conventional_View as
SELECT DISTINCT SILT01.SILF01A, SILT23.SILF23A,
SILT23.SILF23B, SILT20.SILF15A
FROM SILT01, SILT19,SILT23, SILT20
WHERE ( SILT01.SILF01A = SILT19.SILF01A AND
SILT19.SILF23A = SILT23.SILF23A ) AND
( ( SILT19.SILF01A *= SILT20.SILF01A) AND
(SILT19.SILF23A *= SILT20.SILF23A) )
SELECT * FROM ANSI_VIEW
'DB-Library Process Dead - Connection Broken'
SELECT * FROM Conventional_View (Works fine)
Expecting Help or Suggestions from experts.
Thanx,
Gunvant Patil( gunvantp@mail.usa.com )
G'day all.
I am trying to create an index on a view that joins two tables.
I get the classic error of course:
'Cannot index the view 'dbname.dbo.HJC_net'. It contains one or more disallowed constructs.'
Thing that gets me is that it all seems pretty normal stuff and I can't see what is stopping it.
Code is below and any help greatly appreciated.
CREATE VIEW dbo.HJC_net WITH SCHEMABINDING AS
SELECTt_number
FROM dbo.ticket_cancellations RIGHT OUTER JOIN
dbo.tickets ON dbo.ticket_cancellations.tc_system_ref = dbo.tickets.t_number
WHERE dbo.tickets.t_cancelled <> - 1 OR
-- Add all cancellation codes that are to be excluded from the NET view below
(dbo.ticket_cancellations.tc_cancellation_code <> 83943
AND dbo.ticket_cancellations.tc_cancellation_code <> 83946)
GO
-- Create a clustered index, it MUST be unique
CREATE UNIQUE CLUSTERED INDEX t_number_unique ON HJC_net(t_number)
I have to try and get my head around this question and ive never seen sql this advanced before.please set me in the right direction.thanks in advance.Using the meeting table schema below provide a SQL statement to create a view in Microsoft SQL Server that will return only 1 record displaying the contents of the MEETING_NUMBER field. The rules for the view are as follows:• The START_DATE field which contains the start date of the meeting record must contain a value before the current system date.• The START_DATE field must be the closest date to the current system date.ID int (4)DOC_CLASS varchar (30)DOC_NUMBER int (4)REVISION int (4)START_DATE datetime (8)FINISH_DATE datetime (8)MEET_TIME varchar (5)VENUE varchar (50)TYPE varchar (50)MEETING_NUMBER varchar (11)CUTOFF_PERIOD int (4)CUTOFF_TIME varchar (5)AGENDA_STATUS varchar (50)SUBJECT varchar (50)SPONSORING_MIN varchar (50)SUPP_AGENDA_STATUS varchar (50)Possible answer:select meeting_numberfrom meetingwhere start_date < getdate()order by start_date desc
View 14 Replies View Relatednow i have two table
1st table
type_id type_name
4 a
5 b
6 c
2nd table
category_id category_name type_id
6 aaa 4
7 bbb 5
9 ccc 6
i want to join two table to create view
autonumber type_name category_name
1 c ccc
2 b bbb
3 a aaa
how can i write this sql to create autonumber field
thanks
I have two machines running SQL server. I need to create a view that contains data from both servers on Server 2.
ex:
Server 1 contains:
database (Employees)
Table (EmpMaster)
Column (EmpNumber)
column (EmpName)
Server 2 contains:
database (Training)
Table (TrainingEntry)
Column (EmpNumber)
Column (TrainingDate)
Column (TrainingDescription)
If the two tables were on the same server and in the same database, I'd just write the following:
select
TrainingEntry.EmpNumber
,Employee.EmployeeName
,TrainingEntry.TrainingDate
,TrainingEntry.TrainingDescription
from TrainingEntry
Left Outer Join Employee on TrainingEntry.EmpNumber =
Employee.EmpNumber
The question is how do I handle going between two databases, and more importantly, how do I handle linking between two servers?
All examples are appreciated.
Thanks
Cannot create index on
view 'View name ' because the view is not schema bound." What is the
Schema bound ? How can i create the view Schema bound ?
Pls help me out Sir
Yaman
I want to create a view from table j25_teamlist2014 with the 7 columns shown below. But I only want the rows which don't have a Status of 'Not Available'.This sql works fine apart from the Team Name and Team Captain columns display the team which is an interger ie Row 1 shows 1 in the Team Name and Team Captain columns instead of 'My Team' and 'Jo Bloggs'.Also when viewing the original table and the new view the structures are slightly different.
CREATE VIEW j25_availableteamlist2014 AS
SELECT Team, Day, Time, Lane, Team Name, Team Captain, Status
FROM j25_teamlist2014
WHERE Status NOT LIKE 'N%'
Trying to create a view with parameters. I want to use view inside the SP. But I'm getting an error. Why?
-- 1st
-- drop table funkete
create table funkete (funketeid int, funketeFname varchar(20))
insert funkete
select 1, 'funkete' union all
select 5, 'amanda' union all
select 6, 'funkete'
go
-- 2nd
-- drop proc a
create proc a (@funketeid int)
as
select @funketeid, funketefname from funkete
go
-- 3rd
exec a @funketeid = 4
go
-- 4th
create view vw_funkete4 as
declare @funketeid int
select @funketeid, funketefname from funkete
go
=============================
http://www.sqlserverstudy.com
Hi, Is there anyway to create a view within a Function? The code is as below. I execute the code between "BEGIN" and "END". SQL Analyzer report error that said
'CREATE VIEW' must be the first statement in a query batch.
I could make the variable constant in SELECT statement, but I'm wondering if there is a way to make CREATE VIEW as part of code piece.
CREATE Function GetCommonFailurs()
AS
BEGIN
IF OBJECT_ID(N'CommonFailures') IS NOT NULL
DROP VIEW CommonFailures
DECLARE @Run1Result as char(4), @Run2Result as char(4);
SET @Run1Result='Fail';
SET @Run2Result='Fail';
CREATE VIEW CommonFailures
AS
SELECT Run1Failures.RunID as Run1ID,
Run2Failures.RunID as Run2ID,
@Run1Result as 'Run1Result',
@Run2Result as 'Run2Result',
Run1Failures.SmartyDOTXMLFilePath as Run1SmartyFilePath,
Run2Failures.SmartyDOTXMLFilePath as Run2SmartyFilePath,
Run1Failures.SDET as SDET,
Run1Failures.CommandLine as CommandLine,
Run1Failures.OutputFilePath as OutputFilePath
FROM Run1Failures
INNER JOIN Run2Failures
ON Run1Failures.TestID = Run2Failures.TestID
END