Hi, I have system with SQL Server 2K5 SE 3042 SP2 . I was able to set up mirroring with primary-mirror-witness arrangement through GUI. In this company I replaced another DBA who left, and the way our sys admin arranged our logins co-existed in domain for a while. Then sys admin, after mirroring was done, removed my login, renamed other DBA's login with mine, and removed his. Now I cannot create endpoint, either by t-sql or through GUI: "An implicit login creation has failed. Reason: the login may have been dropped or its name may already be in use, error 1545".
After pressing Start Mirroring the following shows: "Database Mirroring Transport is disabled in the endpoint configuratin, error 1486". The 2nd error understandable in view of the 1st one. I checked sys.database_mirroring_endpoints, it is empty. Anyone has an idea what this implicit login is, and where to look for it?
The first part of the install.sql ran ok, but it chokes on the CREATE ENDPOINT line: is this really a limitation on the Express edition or did I miss something on installation or configuration?
Msg 7878, Level 16, State 1, Line 3
This "CREATE ENDPOINT" statement is not supported on this edition of SQL Server.
I have been looking at this statement for allowing access from a remote location to a specific database on my SQL Server (2005) from a client application. Is it possible to do this using this method? I see lots of examples using this to expose Web Services of DB objects, however I need the client application to be able to authenticate to and access all objects in the database. If so, could some one provide a simple example of the arguments to use? For example, which protocol arguments are valid for this? I would like to use SQL Server Authentication. Is this possible? Regards, -Troy
what can cause the above error when connecting to an endpoint via a c# app? the app, and sql are both on my machine ( im just doing this for test purposes and to learn something new.)
I already had a thread for same problem but didn't recieved any response in last 4-5 months so I created a new thread for this
I am using service broker in between two database servers. following is the way i am sending and receiving messages
Send
BEGIN TRAN BEGIN DIALOG CONVERSATION @handle FROM SERVICE @SendService TO SERVICE @ReceiveService ON CONTRACT @Contract WITH LIFETIME = @lifetime;
SEND ON CONVERSATION @handle MESSAGE TYPE @xmlMessageType(@xmlMessage); COMMIT
Receive
BEGIN TRAN; RECEIVE TOP(1) @xmlMessage = message_body, @handle = conversation_handle, @message_type = message_type_name FROM TransactionQueue;
---------------------------------------------------------------------------------------------------- -- Check to make sure a message was returned to process. In theory this should never happen. ---------------------------------------------------------------------------------------------------- IF @@rowcount = 1 BEGIN
IF @message_type = 'http://schemas.microsoft.com/SQL/ServiceBroker/EndDialog' BEGIN END CONVERSATION @handle; COMMIT RETURN 0 END
IF @message_type = N'http://schemas.microsoft.com/SQL/ServiceBroker/Error' BEGIN RAISERROR(N'Received error %s from service [Target]', 10, 1) END CONVERSATION @handle; COMMIT RETURN 0 END
SET @sql = 'EXEC '+@message_processor_name+' @xml'
BEGIN TRAN EXEC sp_executesql @sql, N'@xml XML', @xml=@xmlMessage COMMIT TRAN END CONVERSATION @handle; END COMMIT
I see Messages are delivered to the target every thing working fine other than following errors which i am seeing in profiler.
1) "This message could not be delivered because the conversation endpoint has already been closed." I see this error on initiator end. Is it like ending conversation on initiator end when i get "EndDialog" send an acknowledgement, which cannot be recieved by target as it has already ended conversation.
2) "An error occurred while receiving data: '64(The specified network name is no longer available.)'." I don't have much idea about the reason for this error. But in profiler i see value for GUID is different for this error and the real message.
I am getting the following error when creating a endpoint (that will be used for allwayson) The Database Mirroring endpoint cannot listen for connections due to the following error: '10049(The requested address is not valid in its context.)'.
My physical network card is configured with:
10.9.255.170
and iam creating my endpoint with 10.9.255.82
The creation of endpoint is being done with;
CREATE ENDPOINT [Hadr_endpoint] AS TCP (LISTENER_PORT = 5022, LISTENER_IP = (10.9.255.82) FOR DATA_MIRRORING (ROLE = ALL, ENCRYPTION = REQUIRED ALGORITHM AES) GO IF (SELECT state FROM sys.endpoints WHERE name = N'Hadr_endpoint') <> 0 BEGIN ALTER ENDPOINT [Hadr_endpoint] STATE = STARTED END GO use [master] GO GRANT CONNECT ON ENDPOINT::[Hadr_endpoint] TO [account] GO
I have read many threads on this issue & tried multiple solutions to no avail.
Here's my environment: SQL 2000, Logged directly into server via VPN (so it should be like I am physically at the server).
I've set up a DTS Package that executes an Access procedure. The package runs fine when I execute manually. When I execute via schedule, it fails on the error "ActiveX component can't create object: 'Access.Application'. The actual statement is:
Set objDB = CreateObject("Access.Application")
I know that Scheduled jobs default back to the SQL Agent permissions. I have reset SQL Agent to use my Windows NT account login so it should have the exact same permissions, etc. that I have when I execute manually?
On SQL 2005 with mixed authentication, I am simply trying to create a maintenance plan to backup one single database. When I get to the end of the wizard, the creation process fails with this message:
Create maintenance plan failed().
I installed SQL 2005 using my domain account and the services are running under my account credentials. I am a domain and local admin.
I am in the reporting services configuration tool. When I am on database setup I get Create a Grants Scripts Right with a red X. Everything else passes. I am using sql server credentials and the user is sa on the database server. Any help would be appreciated.
I am working on the build of a product where we build all software needed for the various servers automatically (web, SQL, SSAS etc.). Of course, all the standard builds work fine.
However, when building the SSIS project from the command-line, the binDeployment sub-folder is not created and therefore no SSISDeploymentManifest file is created. Even if the binDeployment sub-folder is present then SSISDeploymentManifest file is not created.
The command-line I am using is "C:Program FilesMicrosoft Visual Studio 8Common7IDEdevenv.exe" MyPackages.dtproj /build Release /project MyPackages
Of course, opening the project in Visual Studio and pressing build does indeed create the SSISDeploymentManifest, so the project is configured correctly.
We need a fully automated build, so can anyone help?
I have a script that performs an unattended installation of SQL Server and works fine.
However, if I un-install via the control panel all the files are removed apart from the databases that are created by me when SQl server was installed. This is good and ensures data is not deleted.
The files left over are in the following directory: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData and contains: MyDatabase.mdf MyDatabase_log.LDF
The problem I have is after performing the re-installtion of SQL server (unattended) I am unable to create a new database with the same name (in this instance called "myDatabase").
The actual files are physically there so this is the reason a new database with the same name cannot be creacted.
Again this is ok again because it ensures I cannot overwrite existing data. However I am unable to re-attach this database to SQl server so I can continue to use it!
The question is:
How do I make this database usable again after an unattended install? Is there a parameter I am missing?
Below are the commands I use that are passed to the installation of SQL Server as command line parameters:
The last four commands I have played around with but for some reason SQL Server service will not start when these are used! (This is a different issue though!).
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , STANDBY = 'E:SQL backup from productionSQL daily diff back up' EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
Hi, I have hourly job running which I inherited from developers. I get this errors in the job. I can't figure out what's wrong and why it's failing. I can't troubleshoot it either because I do not have exact dev enviornment to reproduce the problem. error is attached. Please advise ================= Executed as user: USsqldbagent. ...Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:06:02 AM Error: 2007-08-21 10:06:03.30 Code: 0xC020837F Source: Fill Update Table with new data DataReader Source [1] Description: The data type of "output column "AvailabilityBy" (1885)" does not match the data type "System.String" of the source column "AvailabilityBy". End Error Error: 2007-08-21 10:06:03.30 Code: 0xC004706B Source: Fill Update Table with new data DTS.Pipeline Description: "component "DataReader Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA". End Error Error: 2007-08-21 10:06:03.30 Code: 0xC004700C Source: Fill Update Table with new data DTS.Pipeline Description: One or more component failed validation. End Error Error: 2007-08-21 10:06:03.30 Code: 0xC0024107 Source: Fill Update Table with new data Description:. The step failed. =========== I can run the job for testing. I can't really change anything on server to test this other than database. Thanks a lot in advance
On a new install of sqlserver 2005 developer edition (on x86 xp sp2) I tried to install sp2 but before anything happens I get the message:
Unexpected Error Occurred The following unexpected error occurred:
But no error message, and no log created in the hotfix folder. I downloaded the sp2 file again but got the same error.
When I click on OK to this error I get 7 messages about "hotfix.exe has encountered a problem and needs to close"
I downloaded sp1 and installed that fine, but after that I still have the same error with sp2. I tried extracting sp2 and replacing hotfix.exe with the one from sp1, which avoided the error but wouldn't install.
Any ideas on how to resolve this would be appreciated.
Does anyone have any insight to this error: "Duplicate column name resolution could not be done because the ordinal specified a column of a different name"
I googled it and got one result with no resolution. I get this error from SQL Server when a task in my dts package fails. My dts package is attempting to update records whose fields have changed based on a specified criteria.
The specific task that fails is a transform data task and contains the following sql query: select * from tableNew new, tableOld old where new.col1 = old.col1 and new.col2 <> old.col2 and old.col3 = new.col3
I then have a transformation to update col1, col2, col3.
I need a trigger (well, I don't *need* one, but it would be optimal!)but I can't get it to work because it references ntext fields.Is there any alternative? I could write it in laborious code in theapplication, but I'd rather not!DDL for table and trigger below.TIAEdwardif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblMyTable]') and OBJECTPROPERTY(id, N'IsUserTable')= 1)drop table [dbo].[tblMyTable]GOCREATE TABLE [dbo].[tblMyTable] ([fldCSID] uniqueidentifier ROWGUIDCOL NOT NULL ,[fldSubject][ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[fldDescription] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[fldKBSubject] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[fldKBDescription] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]GOCREATE TRIGGER PrepopulateKBFieldsFromQuery ON dbo.tblMyTableFOR INSERTASBEGINIF UPDATE(fldKBSubject)BEGINUPDATEtblMyTableSETfldSubject = i.fldKBSubjectFROMinserted i INNER JOINtblMyTable ON i.fldCSID = tblMyTable.fldCSIDENDIF UPDATE (fldKBDescription)BEGINUPDATEtblMyTableSETfldDescription = i.fldKBDescriptionFROMinserted i INNER JOINtblMyTable ON i.fldCSID = tblMyTable.fldCSIDENDEND
We use SSIS to download data from a DB2 database using DB2 Connect and MS OLE DB as source and target drivers. It runs fine most of the time BUT there is one issue that we can not solve.
Sometime DB2 table is being used by some other processes, or in other words two different processes are trying to access same table and rows and the situation is what termed as CONTENTION. So one of those processes will fail and finally only one will succeed. We don't have a control over this DB2 source, and don't know what other processes might be running on it.
Our problem is SSIS fails and doesn't returns any error in the log file for this Contention situation. We only know it when our application reports that certain data is missing OR we check that DTS failed on some step (not neccesarily on same always), but then error log doesn't gives us any error message.
Could anyone please analyze and instruct if there are some ways in SSIS 2005 to catch such errors, or to avoid such situations. Feel free to write questions if you have any.
Msg 245, Level 16, State 1, Procedure CompactL1RecordsFromfirstINTRAD, Line 177 Conversion failed when converting the varchar value 'DECLARE rows_cursor CURSOR FOR SELECT ask, dateTimed FROM iDay_Compr_GOOG WHERE DAY (dateTimed) = ' to data type int.
I get this message while executing a stored procedure. It works "half way" but skips this statement and the whole block as a result. In the table @table_name ask is declared as float and dateTimed as DateTime. Similar statements work happily in other stored procedures with no problem. Even in the same stored procedure I have places where I use DAY (dateTimed) and they seem to work as far as I can see although it is a very branched out code with many IF ... ELSE's.
SET @SQL = 'DECLARE rows_cursor CURSOR FOR SELECT ask, dateTimed FROM '+@table_name+' WHERE DAY (dateTimed) = '+@day+' AND NOT ask = 0' exec sp_sqlexec @SQL OPEN rows_cursor FETCH LAST FROM rows_cursor INTO @askQ, @lastTableDateTime SET @SQL = 'UPDATE '+@table_name+' SET askSize = askSize + '+@askSize+' WHERE dateTimed = '+@lastTableDateTime+' AND ask = '+@askQ exec sp_sqlexec @SQL -- <== this is line 177 CLOSE rows_cursor DEALLOCATE rows_cursor
Another puzzle for me is the line number. I used Edit-->GO TO--> 177 to single the line out and it seems to point to a different exec sp_execsql @SQL statement, the one that is down the road.
I can make neither head nor tail out of it. I am sure Jens, Cetin or Andrea or whoever stumble on this post will be able to figure this out. Anyone else's help will also be appreciated.
I am trying to restore a production database backup to a new location on a development workstation, and it fails with "An internal consistency error occurred, Contact Support". When I tried this on a more powerful workstation it ran without a hitch. The db is about 1.5GB, and I think the dev workstation may be running out of resources during the restore. I stopped non-essential services and ran from TSQL, and it still fails. Any suggestions other than getting a better workstation?
Hi I've recently upgraded 4 sql servers to sp5a and have just found that BCP fails on all of them with a DR Watson error. I did reinstall the Nt sp after installing sql server sp5a. Can anyone help ? Thanks
I am new to MS DTS and i am using MS SQL 2000 as my database. I am trying to do a Bulk insert using MS DTS package. The package is trying to load data from Text file to a SQL 2000 table. When runninh the package i am getting an error saying that 1 task failed during execution and the task is shown in red colour indicating that the task has failed. Now when i get the details of the error it shows the follows:
Could not bulk insert because the file D:DtsFile.txt could not be opened. Operation system error code: 21 (The device is not ready).
Please help me in solving this problem, if any one has got this error and resolved or have any idea of the error please help. :)
I have a SQL server scheduled to replication. This works fine if it has to do that one the sever on the same mechine. If it has to be done to another server, the replication fails with the following error message.
08001[Microsoft][ODBC SQL Server Driver][dbnmpntw]Connectionopen(Createfile())
I have a publication that has been working great for over eight months. I have on occassion had to stop publishing and stop subscribing in normal operation without problems.
Yesterday, I ran into a problem that I am not sure how to solve.
I keep getting a distribution task failure "Violation of Primary Key constraint 'aaaashipm_pk'. Attempt to insert duplicate key in object shipm failed while bulk copying into shipm
Anyone run across this or have any suggestions -- do I have a transaction log problem, distribution data base/log problem. I have checked the identity column to make sure its not out of sync, run a check on the table to make sure its not corrupted. I have a couple of other things I am trying but was curious if anyone else had come across this?
Will let you know if I find a solution but it doesn't look good.
The following error occurred but did not provide any additional info.
[DTS.Pipeline] Error: The PrimeOutput method on component "Pgrs - tr_hist" (14596) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
For this package I am trying to use DataDirect's ODBC driver for a Progress OpenEdge Database version 9.1E to move data to SQL Server 2005 in order to make use of SQL's BI suite. I have consulted the DataDirect and have that the driver is functioning properly. The driver works perfectly from another application. They suggest that the problem is in the the datareader's or the connection manager's implementation of the driver.
Please tell me what is the cause of this or at least how to troubleshoot this problem.
I have a (for me) strange problem with subscribing reports.
I've setup several reports that I want to create monthly and store to a file share. In BIDS Preview and deployed to the report server everything works fine.
Each of my reports has an own schedule (they'll be created step by step), export format is Excel, as credentials I use a local user, all parameters are set porperly. When the time to render the reports has gone, I just see the following behind each subscription:
Failure writing file LIS04 : An internal error occurred on the report server. See the error log for more details.
The Log file contains the following: (I highlighted what I think to be the key error)
ReportingServicesService!library!4!12/19/2006-10:20:35:: i INFO: Call to RenderFirst( '/CM Reports/LIS04' ) ReportingServicesService!library!e!12/19/2006-10:20:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams ReportingServicesService!library!4!12/19/2006-10:21:22:: i INFO: Initializing SqlStreamingBufferSize to default value of '64640' Bytes because it was not specified in Server system properties. ReportingServicesService!library!4!12/19/2006-10:21:22:: i INFO: Initializing SnapshotCompression to 'SQL' as specified in Server system properties. ReportingServicesService!runningjobs!f!12/19/2006-10:21:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!14!12/19/2006-10:21:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!runningjobs!1a!12/19/2006-10:22:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!19!12/19/2006-10:22:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!runningjobs!1b!12/19/2006-10:23:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!1c!12/19/2006-10:23:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!runningjobs!3!12/19/2006-10:24:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!17!12/19/2006-10:24:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!runningjobs!17!12/19/2006-10:25:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!3!12/19/2006-10:25:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!runningjobs!16!12/19/2006-10:26:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!19!12/19/2006-10:26:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!runningjobs!18!12/19/2006-10:27:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!13!12/19/2006-10:27:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!runningjobs!d!12/19/2006-10:28:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!1c!12/19/2006-10:28:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!runningjobs!1c!12/19/2006-10:29:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!14!12/19/2006-10:29:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!runningjobs!13!12/19/2006-10:30:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!15!12/19/2006-10:30:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!runningjobs!1c!12/19/2006-10:31:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!8!12/19/2006-10:31:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams ReportingServicesService!dbpolling!c!12/19/2006-10:32:10:: EventPolling processing 1 more items. 1 Total items in internal queue. ReportingServicesService!dbpolling!f!12/19/2006-10:32:10:: EventPolling processing item ea730ae6-d1ad-4535-b651-5bdfe4c0339f ReportingServicesService!library!f!12/19/2006-10:32:10:: Schedule 9587e9db-b005-4f96-ad18-4afc29207481 executed at 12/19/2006 10:32:10 AM. ReportingServicesService!schedule!f!12/19/2006-10:32:10:: Creating Time based subscription notification for subscription: 2ae5c0ed-9eea-4ca4-8e41-be5cde9f7908 ReportingServicesService!library!f!12/19/2006-10:32:10:: Schedule 9587e9db-b005-4f96-ad18-4afc29207481 execution completed at 12/19/2006 10:32:10 AM. ReportingServicesService!dbpolling!f!12/19/2006-10:32:10:: EventPolling finished processing item ea730ae6-d1ad-4535-b651-5bdfe4c0339f ReportingServicesService!dbpolling!c!12/19/2006-10:32:20:: NotificationPolling processing 1 more items. 2 Total items in internal queue. ReportingServicesService!dbpolling!13!12/19/2006-10:32:20:: NotificationPolling processing item b216a965-eaa7-4003-b776-4663c19c8d54 ReportingServicesService!library!13!12/19/2006-10:32:21:: i INFO: Call to RenderFirst( '/CM Reports/LIS04' ) ReportingServicesService!library!13!12/19/2006-10:32:21:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.OverflowException: Arithmetic operation resulted in an overflow. at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName) at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken) at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation) at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper) at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml, ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc) at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials) at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) --- End of inner exception stack trace --- ReportingServicesService!runningjobs!17!12/19/2006-10:32:37:: i INFO: Adding: 1 running jobs to the database ReportingServicesService!library!15!12/19/2006-10:32:37:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 1 running jobs, 0 persisted streams
I have read alot of threads her about 15025 and not one of them have addressed my problem or solved it.
I wanted to add a user to a new database, when I go to security and logins her login is not in the system, yet she was able to log into the production db and do her job without any problems using Windows Domain account.
I went to the New Login and tried to add the record but it gave me an error that the DomainUserName already existed error 15025.
I have gone into every database on the server to see if the login was in any of them and it was not. Then I tried to find orphan users and did find one in about 1/2 the databases that was from our Software provider.
My guess is there is a sid issue, but I am at a loose how to find it or fix it so I can add them to other db's.
I did run these commands
execute as login = 'DomainUserLogin' -- Completed Sucessfully
select suser_name() -- Returned the DomainUserLogn
I am using the Managment Student to manage the users.
I have a maintenance plan that consists of several parts. It basically backs up all the databases, deletes old backups and then shrinks the databases.
The odd thing is that it appears to back up all the databases, can't tell if it does step 2 or 3 and then it fails with the errors below.
How do i correct this short of throwing it out and starting from scratch?
This is a package originally from one server that i'm trying to deploy to a 2nd server. Already using configuration files to chagne the target connections etc.
thx.
PackageStart,WSWT4361,NT AUTHORITYSYSTEM,ProdBackupPlan,{645B67A9-0377-4462-BE81-755D4B1CE9DD},{AB598508-1858-41BC-8844-CA793A7861D4},2/28/2006 5:09:16 PM,2/28/2006 5:09:16 PM,0,0x,Beginning of package execution.
Select CONVERT(nvarchar(38),@Guid) AS RunId" failed with the following error: "The INSERT statement conflicted with the FOREIGN KEY constraint "FK_sysmaintplan_log_subplan_id". The conflict occurred in database "msdb", table "dbo.sysmaintplan_subplans", column 'subplan_id'. The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Select CONVERT(nvarchar(38),@Guid) AS RunId" failed with the following error: "The INSERT statement conflicted with the FOREIGN KEY constraint "FK_sysmaintplan_log_subplan_id". The conflict occurred in database "msdb", table "dbo.sysmaintplan_subplans", column 'subplan_id'. The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Select CONVERT(nvarchar(38),@Guid) AS RunId" failed with the following error: "The INSERT statement conflicted with the FOREIGN KEY constraint "FK_sysmaintplan_log_subplan_id". The conflict occurred in database "msdb", table "dbo.sysmaintplan_subplans", column 'subplan_id'. The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Does anyone have any insight to this error: "Duplicate column name resolution could not be done because the ordinal specified a column of a different name"
I googled it and got one result with no resolution. I get this error from SQL Server when a task in my dts package fails. My dts package is attempting to update records whose fields have changed based on a specified criteria.
This is a problem I encountered when I had to detach a database file (type .mdf):
1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.
2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful
3) However when I tried reattaching the database file, I got this error:
CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'
Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?
