Hello
I am using SQL Server 2005
I want to delete the data from my table after specific number of days.
This should happen automatically.
After the days I specified the data from the table should automatically get deleted. Can anyone let me know how to achieve this.
If anyone can give an example for this it will be great.
Thanks in advance.
I created 2 jobs under sql jobs. How to set up the custom category for my new jobs. It is going under uncategorized but I want to create DBA Monitor category.
View 1 Replies View RelatedHi Everyone,
Can anybody tell me how to create a job which tells me when was the SQL server agent was last started?
what is the equiv to dtsrunui to create the operating system (CmdExec)....
anyone have a good site suggestions for ssis outside of bol
Hi,
Who should own job in SQL Server 2005? Currently, I have set up a couple new jobs, the owner is a windows login with administrative privileges on the server. So the job runs fine.
When I tried to change the owner to a non-admin user, the job failed, stating that I needed to set up proxy permissions or something to that effect. So I left the owner as the admin user.
Is that ok, or even the preferred owner of jobs?
Also -
One of my job steps is calling an SSIS package. On the "general" tab, it shows that it will run the package as the SQL Server Agent, and then there is a section "Log on to Server" where you select windows or sql server login info. In this case, I the SQL Server agent is a different windows account than the job owner... so who is logging in at the package level - the job owner or the SQL Server agent account?
Thanks very much
I am new to SQL7 (in fact new to Database Management as well).
I am trying to write some store procedures to create and manage JOBs within SQL7 Server. For example, to cause data-migration to a different place everyday at certain time. I have tried to use things like sp_add_job. However, I kept getting messages like "Cannot find procedure sp_add_job" although I can see it under Master database. (I have been refering to Master database when I tried these commands).
What I would like to achieve at the end is to be able to specify and create JOBs entirely using Transac-SQL. (I have made it with the Enterprise manager, but that can not be the solution here. )Any help and tips would be greatly appreciated!
I am new to SQL7 (in fact new to Database Management as well).
I am trying to write some store procedures to create and manage JOBs within SQL7 Server. For example, to cause data-migration to a different place everyday at certain time. I have tried to use things like sp_add_job. However, I kept getting messages like "Cannot find procedure sp_add_job" although I can see it under Master database. (I have been refering to Master database when I tried these commands).
What I would like to achieve at the end is to be able to specify and create JOBs entirely using Transac-SQL. (I have made it with the Enterprise manager, but that can not be the solution here. )Any help and tips would be greatly appreciated!
Hello,
We have some jobs that are running on the principle database. I am planning to create those jobs in the mirror database also, so that when it gets failover it will automatically run those jobs. Here is my question, Is there any way we could create the jobs on mirror database also and say not to run (exit) if the database is in mirror role by writing some scripts or by selecting any options? Please let me know. Thanks!
Migrated Packages from DTS to SSIS...
Tried running the jobs calling these DTS packages ....but getting error ......
the step in job is :
DTSRUN /S<servername> /U<username> /P<password> /N"ATL_Get_Down_Dates"
giving error :
Executed as user: USATLBNHSYSTEM. DTSRun: Loading... Error: -2147220438 (8004042A); Provider Error: 0 (0) Error string: The specified Storage File contains multiple Packages; Loading requires a Name or Guid. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 713. Process Exit Code 1. The step failed.
Help Required !!!!!
Thanks in advance !!!
Will prbly write a blog about this pretty soon. Until then, here is a quick llist of steps:
Create an IS package from Visual Studio. In the Toolbox, under the "Control Flow Items" there is a "Transfer Jobs Task". Use this to transfer jobs to your local machine or any other server.
I still have to figure out how to make it write to a flat file. The only destination it allows at this point seems to be another SQL server.
Dinakar Nethi
************************
Life is short. Enjoy it.
************************
http://weblogs.sqlteam.com/dinakar/
Hi,
The application that I'm working is has a job that runs 24/7 which checks a table for rows with specific status, if it finds it, then I has to execute a job for each row that it finds.
I don't know wheather if SQL Server jobs are asynchronous or not, since I need the execution of jobs to be in parallel instead of in a pipeline mode.
I'd appreciate your help.
Thanks,
mamrez
Hi there,,
I've a problem when I make a a full backup for my db using maintenance plan the job that is associated with the maintenance plan is not working and gives the followning error:
The job falied. The job was invoked by user machine nameuser name. The step to run was step1(subplan).
The user I'm using is administrator and the jobs was working normaly and suddenly it stoped.
Thanks in advance
I have two tables
t_DTM_DATA_STAGING around 2 million records
t_DTM_DATA around 251 million records
The below SQL statement looks for records in the t_DTM_DATA_STAGING table that are not in the t_DTM_DATA table and adds them to a 3rd table. (t_DTM_DATA_STAGING2)
This statement has been running fine for weeks, but now it seems to get hung every day. I ran sp_Who2 and it says the status is runnable. I let it run for around 5 or 6 hours the other day to see if it will finish but it didn't. This SQL job is step 3 in a 6 step SQLAgent job that usually finishes in 30 to 45 minutes.
I'm not sure how to troubleshoot this problem. No other jobs are running at the time this job runs.
Could this SQL statement be written a better way?
Thanks for any help anyone can provide.
Jerid
SET QUOTED_IDENTIFIER ON
INSERT INTO
[DTM].[dbo].[t_DTM_DATA_STAGING2]
([CP],,[MAJ],[MINR],[LOCN],[DPT],[YEAR],[PD],[WK],[TRDT],[SYSTEM],[AMOUNT],[DESCRIPTION],[GROUP],[VENDOR]
,[INVOICE],[IDAT],[PO_NUMBER],[DDAT],[RCV#],[RDAT],[RSP],[EXPLANATION],[UPLOAD_DATE],[UPLOAD_USER],[UPLOAD_NAME]
,[RELEASE_DATE],[RELEASE_USER],[RELEASE_NAME],[TRTM])
SELECT
t_DTM_DATA_STAGING.CP, t_DTM_DATA_STAGING.CO, t_DTM_DATA_STAGING.MAJ, t_DTM_DATA_STAGING.MINR, t_DTM_DATA_STAGING.LOCN, t_DTM_DATA_STAGING.DPT,
t_DTM_DATA_STAGING.YEAR, t_DTM_DATA_STAGING.PD, t_DTM_DATA_STAGING.WK, t_DTM_DATA_STAGING.TRDT, t_DTM_DATA_STAGING.SYSTEM, t_DTM_DATA_STAGING.AMOUNT,
t_DTM_DATA_STAGING.DESCRIPTION, t_DTM_DATA_STAGING.[GROUP], t_DTM_DATA_STAGING.VENDOR, t_DTM_DATA_STAGING.INVOICE, t_DTM_DATA_STAGING.IDAT,
t_DTM_DATA_STAGING.PO_NUMBER, t_DTM_DATA_STAGING.DDAT, t_DTM_DATA_STAGING.RCV#, t_DTM_DATA_STAGING.RDAT, t_DTM_DATA_STAGING.RSP,
t_DTM_DATA_STAGING.EXPLANATION, t_DTM_DATA_STAGING.UPLOAD_DATE, t_DTM_DATA_STAGING.UPLOAD_USER, t_DTM_DATA_STAGING.UPLOAD_NAME,
t_DTM_DATA_STAGING.RELEASE_DATE, t_DTM_DATA_STAGING.RELEASE_USER, t_DTM_DATA_STAGING.RELEASE_NAME, t_DTM_DATA_STAGING.TRTM
FROM
t_DTM_DATA_STAGING
LEFT OUTER JOIN
t_DTM_DATA AS t_DTM_DATA_1
ON
t_DTM_DATA_STAGING.TRTM = t_DTM_DATA_1.TRTM
AND
t_DTM_DATA_STAGING.TRDT = t_DTM_DATA_1.TRDT
AND
t_DTM_DATA_STAGING.PD = t_DTM_DATA_1.PD
AND
t_DTM_DATA_STAGING.YEAR = t_DTM_DATA_1.YEAR
AND
t_DTM_DATA_STAGING.DPT = t_DTM_DATA_1.DPT
AND
t_DTM_DATA_STAGING.LOCN = t_DTM_DATA_1.LOCN
AND
t_DTM_DATA_STAGING.MINR = t_DTM_DATA_1.MINR
AND
t_DTM_DATA_STAGING.MAJ = t_DTM_DATA_1.MAJ
AND
t_DTM_DATA_STAGING.CO = t_DTM_DATA_1.CO
AND
t_DTM_DATA_STAGING.CP = t_DTM_DATA_1.CP
WHERE
(t_DTM_DATA_1.CP IS NULL)
Hi,
how to reschedule/schedule jobs in server 2000 and 2005 Programmatically?
thanks
sandipan
We have our SQL Server 2005 hosted at a datacenter and have only SS Management Studio access (no term serv, no event log, etc.). Also, our hosting company has disabled the Database Mail feature. We have over 60 jobs running on a minute/hourly/daily basis that are critical for our business. It is super important for us to know if and when a job failed.
Given this scenario, how do you suggest we implement monitoring/notification of failed jobs?
Hello, How are you?
I have a problem when I try to create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE. When I€™m going to choose the data source, the SQL Server 2005 Compact Edition provider doesn€™t appear in the list. I installed the SQL Server 2005 Compact Edition from this page http://www.microsoft.com/downloads/details.aspx?FamilyId=%2085E0C3CE-3FA1-453A-8CE9-AF6CA20946C3&displaylang=en. In the additional information says by installing SQLServerCE31-EN.msi installs the provider (System.Data.SqlServerCe.dll) in the GAC (global assembly cache) and registers the OLEDB provider (sqlceoledb30.dll). So, I don€™t understand why couldn€™t I create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE?
I appreciate your help€¦
Hi,
We have development and user acceptance (UA) servers. When I start a job on the development server, on the management studio, Start Jobs window and Job activity windows indicate "Executing" until the end of the job and finish with "success" or "failure"
But on the UA server, second after I start a job, Start Jobs window comes up with "success" or failure" and Job activity monitor says "idle" but Job continues to log without any error message and updates the tables. So these two windows are not reliable at all. I have to add that I have only job operator rights on the UA server.
Does anybody know what the reason is ?
Thanks
Running [dbo].[insertlogin] ( @log = hiten, @pas = hiten ).A .NET Framework error occurred during execution of user-defined routine or aggregate "insertlogin": System.Data.SqlClient.SqlException: Must declare the scalar variable "@Log".System.Data.SqlClient.SqlException: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnectionSmi.EventSink.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages) at Microsoft.SqlServer.Server.SmiEventSink_Default.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages) at System.Data.SqlClient.SqlCommand.RunExecuteNonQuerySmi(Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at SqlServerProject1.StoredProcedures.insertlogin(SqlString log, SqlString pas).No rows affected.(0 row(s) returned)@RETURN_VALUE = Finished running [dbo].[insertlogin]. ***************************************************************all i am trying to do is : creating a SP in VS using managed code and then trying to execute it. But every time i get the above error. If you can tell me how to edit connection string in this that would be very helpful. At present i am using : Using conn As New SqlConnection("context connection=true") I tried to do "" ALTER ASSEMBLY SqlServerProject1 WITH PERMISSION_SET=EXTERNAL_ACCESS""but i get this error "" Msg 10327, Level 14, State 1, Line 1ALTER ASSEMBLY for assembly 'SqlServerProject1' failed because assembly 'SqlServerProject1' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS. The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem.""" *********************************************************************Plz help
View 13 Replies View RelatedIn 2005 the security login will not allow me to add a user, database role, application role or schema manually. If I use a Transact-SQL in Query Editor to create a Login with a password, it said it was successful yet The T-SQL added my login as an application role is this correct? and why can I not add manually? is there another function that must be performed first?
I am very new to the environment but know 2000 very well and miss it being so user friendly.
Hi,
We wish to create cube in SQL Server 2005,
where we can create a cube using query.
I am developing an application in VB.NET that is using a sql database. I am trying to start testing with multiple computers running the app while the database is on a remote computer. I have 2 desktop computers networked right now with 1 of them having the database and the other I want to run the program on. I am trying to figure out how to use windows authentication to login to sql server from the remote computer. I can login using Sql authentication but it is taking forever and I keep getting timeout errors so I wanted to try Windows Authentication to see if it is faster. If someone could walk me through the steps I need to take or give me some suggestions to fix my problems I would greatly appreciate it.
View 2 Replies View RelatedIn oracle we create abstract datatypes using the command, for example,
CREATE TYPE address as object
(Street varchar2(50),
cuty varchar2(25));
Can this be done in SQL SERVER 2005? I am new to SQL SERVER 2005. Please help me out giving out the proper syntax alongwith an example.
Hi
I just need some information on creating the second instance in sql server 2005. In my production server we have the databases with different collation. we need to separate those two different collation databases by creating the new instance. I have to create the instance by this afternoon. I think we need to install the sql server 2005 again and select the option of named instace. As long as this is production server are databases are going to be available for the users while installing the sql server to create the different instance? Could some one please respond on this. Thanks!
Hello all,
I am new to MS SQL Server and am having troubles figuring out how to create a new database file. I have installed everything I can and and still cannot find any where to add a database file. I am upgrading from Access to SQL and feel like I am missing something... I will eventually need to create a couple of SQL databases and connect from Classic ASP and ASP.net in different applications. Before I worry about how to connect I need ot create something to connect to.
Any help would be greatly appreciated.
Thanks
Panhead
I have two problems on creating new SQL server database in Visual Web Developer 2005 Express using SQL server 2005 Express.
The 1st problem: (It is resolved)
After installed SQL Server 2005 express and Visual Web Developer 2005 Express. When I tried to create a SQL server database in VWD the following error occurred:
"connection to SQL Server files (*.mdf) require SQL server express 2005 to function properly. please verify the installation of the component or download from the URL: go.microsoft.com/fwlink/?linkId=49251"
I was stuck with this problem for few days. I did several times of install/reinstall of VWPExpress and SQL server Express, made very sure following proper de-installation sequence as specified in the release readme. But it did not resolve the problem.
Latter I found out that if I login with another Windows XP user account, I don't get the problem.
Changing the security authority of XP file systems and IIS didn't help.
And to prove that I was doing the installation correctly, I tried a new installation of the VWDExpress with SQL server 2005 express in another machine, it worked and I could create new empty SQL database.
After 2 days of frustrating changing of options, parameters, server names, messing with the registry etc.... Finally, I found a way to overcome this problem.
The solution is:
In Visual Web Developer 2005 Express, select:
Tools -> Options -> Database Tools -> Data Connections,
Change the setting: "SQL Server Instance Name (blank for default)" to "SQLEXPRESS". (where SQLEXPRESS is the default server instance name)
That solved this 1st problem.
I still don't know the exact reason for this problem. But I recalled I did installed the VWDExpress few weeks ago, I might have installed it without selecting SQL server 2005 express at that point. I guess the subsequent install/re-install did not clean up those junk in the registry.
I still have the 2nd problem:
The "Create new SQL database..." option is always grayed out when I right click on the Data connections in the "Database Explorer" tab.
I have a bypass for this difficulty for time being:
I have to do it by using the "Add connection....", put in the server name: "myserver/SQLEXPRESS" and a new database name.
Any input form anyone ? Appreciated!
I have several general questions about this but I thought I would describe what I am doing first. My senior project team is developing a web application that will wind up using SQL Server for the database. We are writing it in ASP.net and developing the database on SQL Server Express. My job is to develop and deploy the database. I have an ERD designed and am getting ready to start coding the tables, constraints and stored proceedures but am unsure of a couple of things.
1) How do I create a new schema?
2) I can see how to create tables in the GUI but what I am trying to do is create scripts that can be used to create the tables and objects on the actual server that our client will be using. How do I create scripts in 2005 Express? Do I just go click on the new query button?
3) Are scripts that work for Express going to have any problem executing on SQL Server?
Hi All... We're cloning an application currently under development on Server 2003 / SQL Server 2005 / dotnet 2.0. The clone's going to live on an XPSP2 box with SQL Server 2003 - it's for demo purposes... The application's able to get to our own database, but it's having a hard time creating the ASPNETDB that dot net likes to have.
Aside from the OS, the only difference between the two SQL Servers is that on the working system, we're using windows authentication on the database while on the non-working system, we're using SQL Server authentication. But we've tuned the connection strings appropriately - again, we can get to our own db just fine.
We have the following lines in our web.config:
<connectionstrings> <clear /> <add name="LocalSqlServer" connectionstring="Server=localhost; Database=ASPNETDB; UID=sa; PWD=mypassword" /></connectionstring>
On the working system, the Server is an actual IP address, integrated security is set to true, and of course the uid/pwd is a bit different. But again, using a very similar connection string, we able to get to OUR database on the non-working system...
The error we're getting at runtime is:
Cannot open database "ASPNETDB" requested by the login. The login failed. Login failed for user 'sa'.
When we poke into the database from SQL Server Management Studio - on a remote machine - we can see our own database is there, but the ASPNETDB isnt there. Yet... I suspect it failing getting in to just create the db....
Any thoughts? Thanks for the help!!! -- Curt
Hi friends, Is there any way to create a text file or word file through sql server 2005.If you have any source please suggest me.. P.Kumaran
View 3 Replies View RelatedWhen creating a user in SQL Server what is a Schema as opposed to a Role?
In the security folder of a database, I also saw the folders "Asymmetric keys", "Certificates", and "symmetric keys". What are these about?
thank you.
I have a varchar column in a table, which is an unique key column. Now when I design this table should I use this column as a primary key or should I add one more Integer column as a primary key column for the performance?
One more point is, when ever I do a search on this table I will search based on that unique varchar column values only, so even then if I add new integer column just for Primary key I will not use this column for searching values.
With these information, can some body help me in deciding this?
In oracle we create abstract datatypes using the command
CREATE TYPE address as object
(Street varchar2(50),
cuty varchar2(25));
Can this be done in SQL SERVER 2005. I am new to SQL SERVER 2005. Please help me out giving out the proper syntax alongwith an example.
I currently have a website which is using ASP.NET 2.0, C#, and SQLServer 2005. The website will be used to enter grants for auniversity. When a new grant is entered, I need to generate a primarykey. The primary key will need to follow the format: Two digit forfiscal year, then number of the grant for that year. Example:Year 08 and 14th grant of the year would be: 0814How can I implement this. Right now, I have a "New Grant.aspx" pagewith a Submit button. I am guessing the date is going to be formattedin C#. How can I check what the last primary key in the database is?Also, it seems to me that SQL Server insists that the primary key be32 bits long, however my primary key will only be 4. How can Ioverride this? Thanks.
View 3 Replies View RelatedHi,
For various reasons a new desktop application I am developing is using the SQL Server 2005 Compact Edition Release Candidate to store local data. On my development machine (XP SP2, VS2005, SQL Server 2005 Developer Edition) the software is able to create the database file, and read and write to it fine.
However on our test machine, which does not have any of the development tools the software is unable to create the database. A System.Data.SqlServerCe.SqlCeException is thrown. The message is: "SQL Mobile usage is restricted on this platform. To use SQL Mobile, you must install SQL Server 2005, Visual Studio 2005, or the Tablet PC SKU." Obviously this goes somewhat against the blurb for SQL Server CE.
Is this something that will be fixed shortly? Or is it the intention that databases can't be created on machines that do not SQL Server or Visual Studio installed? (Incidentally the reason for creating the database on the fly is that we are encrypting it, using the users credentials, so that only they can open the database.)
Thanks, Steve