Csv File Import: Bulk Insert Data Conversion Error (type Mismatch)

Sep 27, 2004

Hi,

Iam trying to import data from a csv file into my table in SQL Server 2000. My table is called as temp_table and consists of 3 fields.

column datatype

-------- -----------

program nvarchar(20)

description nvarchar(50)

pId int

pId has been set to primary key with auto_increment.

My csv file has 2 columns of data and it looks like follows:

program, description

"prog1", "this is program1"

"prog2", "this is program2"

"prog3", "this is program3"

Now i use BULK INSERT like this

"BULK INSERT ord_programs FROM 'C:datafile.csv' WITH (FIELDTERMINATOR=',', ROWTERMINATOR='
', FIRSTROW=2)"

to import data into my table in SQL server and it gives me this error

"Bulk insert data conversion error (type mismatch) for row 2, column 3 (pId)"

I guess i have to use fileformat or something since i dont have anything for pId field in the csv file to make it work...

Please help me out guys and please post a snippet of code if you have.

Thank You.

View 2 Replies

Type Mismatch Error On Bulk Insert

Oct 13, 2005

I am getting a type mismatch error when I do a bulk insert.---Begin Error Msg---Server: Msg 4864, Level 16, State 1, Line 1Bulk insert data conversion error (type mismatch) for row 1, column 14(STDCOST).---End Error Msg---The STDCOST is set to decimal (28,14) and is a formatted in Access as anumber, single with 14 decimal. I don't know why I would be getting a TypeMismatch error.Any idea?Mike

View 4 Replies View Related

BULK INSERT ERROR Using Format File - Bulk Load Data Conversion Error

Jun 29, 2015

I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?

Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".

BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')

[code]...

View 5 Replies View Related

Bulk Insert Task Failing On Data Type Conversion For A Destination Column Of Type Bit

Jul 6, 2006

I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.

I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.

I hope someone can help me work through this.

Thanks in advance,

SK

SSIS package "Package3.dtsx" starting.

Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".

Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".

Task failed: Bulk Insert Task 1

Task failed: Bulk Insert Task

Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

SSIS package "Package3.dtsx" finished: Failure.

View 5 Replies View Related

Bulk Insert - Bulk Load Data Conversion Error

Jan 17, 2008

Im having some issues with bulk insert.

This is the table:

CREATE TABLE [dbo].[tmp_GA_status](

[GA_recno] [int] NOT NULL,

[GA_desc] [varchar](40) NULL

)

This is the file (unicode):
1|"test1"
2|"test2"
3|"test3"
4|"test4"
5|"test5"
6|"test6"
7|"test7"
8|"test8"

and this is the sql:

bulk insert tmp_GA_status from 'C: empTextDumpGA_status.dta'

with (CODEPAGE='RAW', FIELDTERMINATOR='|', ROWTERMINATOR='
', DATAFILETYPE='widechar')

so yeah, pretty simple. But whatever I do I get this;

Msg 4864, Level 16, State 1, Line 1

Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (GA_desc).

So what am I doing wrong ?

View 13 Replies View Related

Bulk Insert Data Conversion Error (truncation)

Dec 4, 2006

hi

"Bulk insert data conversion error (truncation) for row 1, column 1 (id)."

when you get the error above or similar in sql server 2000 does it continue inserting the data by truncating it or does it stop beacause looking at the data that i have got it seems to continue inserting the data but just truncates the colunm. i have tried it several time its seeems to be consistent.

I have data that has white spaces after the actual data e.g. '00093 ' hence i am happy aslong as i can be sure that it does always continue as i will be loading alot of data using a similar process.

hence my question is that will it load all the data all the time and just truncate it to fit the column size?

View 7 Replies View Related

Howto Get Avoid Bulk Insert Data Conversion Error?

Aug 7, 2006

hi, i having a problem in bulk insert , which is regard the text file that
to insert into database, when insertion processing,

if my textfile have NULL value, it give me Bulk insert data conversion error

for example in my text file c:mytest.txt , it contains data NULL

123 studentname NULL

can we let bulk insert detect NULL value ?

i have try on putting "KEEPNULLS" , but it doesn't help , caused some fields in table may in datetime type

BULK INSERT [mytable] FROM c:mytest.txt WITH (FIELDTERMINATOR = '' '', ROWTERMINATOR = '''', KEEPNULLS )'

thank you

View 4 Replies View Related

Memo Data Type Import Error While Importing Data From Access File Into SQl Server 2005

Sep 10, 2007

I have one column in SQL Server 2005 of data type VARCHAR(4000).

I have imported sql Server 2005 database data into one mdb file.After importing a data into the mdb file, above column
data type converted into the memo type in the Access database.

now when I am trying to import a data from this MS Access File(db1.mdb) into the another SQL Server 2005 database, got the error of Unicode Converting a memo data type conversion in Export/Import data wizard.

Could you please let me know what is the reason?

I know that memo data type does not supported into the SQl Server 2005.

I am with SQL Server 2005 Standard Edition with SP2.

Please help me to understans this issue correctly?

View 4 Replies View Related

Error On Custom Data Mining Plugin: Content Type Mismatch

Jan 11, 2007

Good afternoon,

I'm doing a custom clustering plugin for text to pre-process ("clean" the texts), calculate weights, estimate the number of clusters (using the PBM index) and finally, do the actual clustering.

So... I've made each of these modules on C++ and I'm putting them all togheter on the plugin.

My database (MDB file) has only one table, with only two fields within: a key (auto-incremental) and a small text. What I intend to do is to get the text in each test case, store them togheter somewhere and call my classes to cluster these texts.

I'm trying to log the texts in a file (just a test) on the ProcessCase method, in the CaseProcessor class. I've did it with no problems with numerical data.

But when I load the MDB file on the Mining Structures Wizard, it says the content type of the field holding the texts is "Continous" and the data type is "Text". Actually, when I saw it I didn't really mind.

But when I run the mining model it gives me the following error: "Error 1 Error (Data mining): The data type of the Table1.Texto mining structure column must be numeric since it has a continuous content type (Content is set to Continuous or Key Time or Key Sequence). 0 0 "

So... How do I change this content type ? (the content type combobox on the Mining Structures Wizard couldn't the changed)

Can anyone help me on this, please ?

Thanks a lot.

View 6 Replies View Related

Bulk Insert, Bcp For Import Log File In Sql

Mar 11, 2008

i have a log file, i am trying to import data from it to SQL in order to analyze the data (able to query on the data), however that task seems impossible.
In fact the log file contains a varying number of column fields (error logged, various types of data logged demand varying number of columns). More than that the fields themself are hard to extract.

An example of data in my log is:xxxxxxxx is some alphanumeric chars2008-01-09 20:16:05,4784E36F.req,10.1.1.26,xxxxxxxxx,OK -- SMPP - xxxxxxx:xxxxx,Sender=xxxx;SMSCMsgId=2028eecc;Binary=1;DCS=8;Data=xxxxxxxxxxxxxx...2008-01-09 20:16:05,4784E338.req,10.1.1.26,xxxxxxxx,Retry Pending - ERROR: Timeout waiting for response from server or lost connection -- SMPP - xxxxxxxxxxx:xxxxx,Sender=xxxxx........

I may use regular expressions to extract the data, and maybe use a regular INSERT to put in the right table. Thus it seems like making a manual Bulk Insert(yeah and it may take much more time), it seems strange, can i use somehow some additional tool (in SQL package or external), to assist somehow.

Thanks and sorry if this is double posted !

View 1 Replies View Related

Index Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...

Jul 23, 2005

Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View 1 Replies View Related

Import Data With Bulk Insert

Jun 25, 2014

I have imported data in my table using the bulk insert command. I was supposed to fill specific columns of my table with that data so I used a view to put them in the column I wanted.

The table looks like this now:

id | id_param | val_param
+-----------+--------------+
1 | no_tel | 742062141
2 | sex | 1
3 | age | 23
4 | no_tel | 765234157
5 | sex | 1
6 | age | 34

When I want to select only the val_param that is=1 for the id_param=sex using this interogation:

select * from bd_rox where id_param='sex' and val_param='1'

it returns no value and I don`t know why.The wanted result should look like this:

id | id_param | val_param
+-----------+--------------+-
2 | sex | 1
5 | sex | 1

View 9 Replies View Related

Bulk Load Data Conversion Error, And More...

Jul 13, 2007

hello,
I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db.
The problem I am facing is that i get errors when running bulk insert.
The tables all have one extra column which is a primary key identity value.
Additionaly, the column data types include:
int, bigint, nchar, nvarchar, datetime and bit
an example table looks like this:

CREATE TABLE [dbo].[counties](
[id] [int] IDENTITY(1,1) NOT NULL,
[InternalID] [int] NULL,
[Active] [bit] NULL,
[Code] [nchar](10) COLLATE Greek_CI_AS NULL,
[Description] [nvarchar](50) COLLATE Greek_CI_AS NULL,
[StartDate] [datetime] NULL
)

An example data file looks like this:

InternalIDActiveCodeDescriptionDate
1 101Î‘Î¹�?„�?‰Î»Î¿Î±ÎºÎ±�?�?Î½16/11/1909
2 102Î‘�?�?Î³Î¿Î»Î¯Î´Î¿�?‚29/04/1949
3 103Î‘�?�?ÎºÎ±Î´Î¯Î±�?‚16/11/1909
4 104Î� �?�?�?„Î·�?‚ 16/11/1909
5 105Î‘�?„�?„Î¹ÎºÎ®�?‚ 26/07/1943

So, what I do is:
1. for each table I generate a character format file with the following command:
bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress
2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:

9.0
6
1 SQLCHAR 0 0 "" 0 id ""
2 SQLCHAR 0 12 " " 2 InternalID ""
3 SQLCHAR 0 3 " " 3 Active ""
4 SQLCHAR 0 20 " " 4 Code Greek_CI_AS
5 SQLCHAR 0 100 " " 5 Description Greek_CI_AS
6 SQLCHAR 0 24 " " 6 StartDate ""

3. I run BULK INSERT
BULK INSERT tablename
FROM dataFile
WITH (
FIRSTROW=2,
FORMATFILE = formatFile
DATAFILETYPE = 'char'
FIELDTERMINATOR=' '
ROWTERMINATOR='
'
KEEPNULLS
)

As a result of the above configuration I get this:

Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate).
Msg 4865, Level 16, State 1, Line 1
Cannot bulk load because the maximum number of errors (10) was exceeded.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".

What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert.
I would appreciate any help, as I am running out of time
Thank you.

Dimitris Chrysomallis

View 4 Replies View Related

Bulk Load Data Conversion Error. And More...

Jul 13, 2007

Hello,
I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db.
The problem I am facing is that i get errors when running bulk insert.
The tables all have one extra column which is a primary key identity value.
Additionaly, the column data types include:
int, bigint, nchar, nvarchar, datetime and bit
an example table looks like this:

CREATE TABLE [dbo].[counties](
[id] [int] IDENTITY(1,1) NOT NULL,
[InternalID] [int] NULL,
[Active] [bit] NULL,
[Code] [nchar](10) COLLATE Greek_CI_AS NULL,
[Description] [nvarchar](50) COLLATE Greek_CI_AS NULL,
[StartDate] [datetime] NULL
)

An example data file looks like this:

InternalIDActiveCodeDescriptionDate
1 101Î‘Î¹�?„�?‰Î»Î¿Î±ÎºÎ±�?�?Î½16/11/1909
2 102Î‘�?�?Î³Î¿Î»Î¯Î´Î¿�?‚29/04/1949
3 103Î‘�?�?ÎºÎ±Î´Î¯Î±�?‚16/11/1909
4 104Î� �?�?�?„Î·�?‚ 16/11/1909
5 105Î‘�?„�?„Î¹ÎºÎ®�?‚ 26/07/1943

So, what I do is:
1. for each table I generate a character format file with the following command:
bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress
2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:

9.0
6
1 SQLCHAR 0 0 "" 0 id ""
2 SQLCHAR 0 12 " " 2 InternalID ""
3 SQLCHAR 0 3 " " 3 Active ""
4 SQLCHAR 0 20 " " 4 Code Greek_CI_AS
5 SQLCHAR 0 100 " " 5 Description Greek_CI_AS
6 SQLCHAR 0 24 " " 6 StartDate ""

3. I run BULK INSERT
BULK INSERT tablename
FROM dataFile
WITH (
FIRSTROW=2,
FORMATFILE = formatFile,
DATAFILETYPE = 'char',
FIELDTERMINATOR=' ',
ROWTERMINATOR='
',
KEEPNULLS
)

As a result of the above configuration I get this:

Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate).
Msg 4865, Level 16, State 1, Line 1
Cannot bulk load because the maximum number of errors (10) was exceeded.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".

What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert.
I would appreciate any help, as I am running out of time
Thank you.

Dimitris Chrysomallis

View 5 Replies View Related

Bulk Insert Fails To Import Data Files Created On Unix

Sep 21, 2006

It seems to me that files created on Unix machines with line terminator , or chr(10), cannot be imported using the Bulk Insert statement. Is this a bug, or an oversight by Microsoft? Does this mean that unless one replaces all with
, there is no way to use Bulk Insert to import Unix files? This is a very strange behavior by MSSQL. Even lessor programs such as Excel and Word automatically recognize chr(10) as a line termination character. Am I missing something, or is this just the way MSSQL is?

View 7 Replies View Related

Getting Error : : The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value

Jan 28, 2008

update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?

View 5 Replies View Related

How To Insert Data From A File Into Table Having Two Columns-BULK INSERT

Oct 12, 2007

Hi,
i have a file which consists data as below,

3
123||
456||
789||

Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.

BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')

but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.

can anyone help me how to do this?

Thanks,
-Badri

View 5 Replies View Related

Type Mismatch : Error

Jul 20, 2005

HelloMY SQL Server is causing me this problem :Microsoft VBScript runtime error '800a000d'Type mismatch: 'ident'[color=blue][color=green][color=darkred]>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>[/color][/color][/color]I am getting from the table datingnew the value of the ident field."select max(ident)as test from datingnew"ident = RS2("test")ident = ident + 1The ident value is passed over 2 sites by hidden form value. There I amsimpy trying to insert it again in the same table datingnew.[color=blue][color=green][color=darkred]>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>[/color][/color][/color]query = "INSERT INTO datingnew(ident,....,registerdate)"query = query & " VALUES ('" & ident & "', '" & .... & "', '" &registerdate & "')"there the error message is comeing each time :[color=blue][color=green][color=darkred]>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>[/color][/color][/color]Microsoft VBScript runtime error '800a000d'Type mismatch: 'ident'[color=blue][color=green][color=darkred]>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>[/color][/color][/color]I have tried to change the the type of ident in the table datingnew tointeger , nvarchar, ....Tried to close the recordset each time with db.close, RS. close.Changed the ident field to standard, but also to with and withoutduplication, didnt help so far ...Need helpkind regards ArunMicrosoft VBScript runtime error '800a000d'Type mismatch: 'ident'

View 5 Replies View Related

SQL Server 2012 :: Bulk Load Data Conversion Error (truncation)

May 15, 2014

Is there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.

I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.

View 5 Replies View Related

SSIS Flat File Loading - Data Type Conversion

Apr 24, 2007

It seems I can do the type conversion in two place:

1. The advanced editor for flat file source => Input and output roperties. And I can set the output columns data type properties there.

2. Using a Data conversion box in Data flow transformation.

Any difference between these two? Which one should be used?

View 1 Replies View Related

Conversion Of Int Data Type Error?!

Nov 6, 2007

Hi,I keep getting the error:System.Data.SqlClient.SqlException: Conversion failed when converting the varchar value '@qty' to data type int. When I initiate the insert and update.I tried adding a: Convert.ToInt32(TextBox1.Text), but it didn't work.. Could someone help?My code:private bool ExecuteUpdate(int quantity){ SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - '@qty' WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); con.Close(); return true;} private bool ExecuteInsert(String quantity) { SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "INSERT INTO Transactions (Usersname,Itemid,itemname,Date,Qty) VALUES (@User,@productID,@Itemsname,@date,@qty)"; command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name); command.Parameters.Add("@Itemsname", labname.Text); command.Parameters.Add("@productID", labid.Text); command.Parameters.Add("@qty", Convert.ToInt32(TextBox1.Text)); command.Parameters.Add("@date", DateTime.Now.ToString()); command.ExecuteNonQuery(); con.Close(); return true; }protected void Button2_Click(object sender, EventArgs e){ TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e) { if (e.CommandName == "Update") { TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteInsert(TextBox1.Text); } } Thanks so much if someone can!Jon

View 33 Replies View Related

Data Type Mismatch

Oct 26, 2007

I am new to SQL.

I have the following SQL query.

Update TimeSheet SET TotalTime=TimeOut - TimeIn;

The data type for TotalTime required by me is (For example)
2 Days 3 Hrs.

So what should is Do?

At present i am getting output as 'Jan 1 1900 1:00AM' where as i want it to show as 0 days 1 hour.

View 9 Replies View Related

VBScrip Type Mismatch Error

Jul 23, 2005

I'm getting a type mismatch error on the mid(strRecord,1,1)="H" line. Iused to do this all of the time, but I haven't done any VBScript forawhile, so I'm sure I'm forgetting something.While not objResults.EOFstrRecord=String( 333 ,32 )IF TicketID<>objResults.Fields("ticket").Value thenMid(strRecord,1,1)="H"mid(strRecord,2,5)=objResults.Fields("cust").Value 'custmid(strRecord,7,30)=objResults.Fields("ship1").Value 'ship1mid(strRecord,37,30)=objResults.Fields("ship2").Value 'ship2mid(strRecord,67,30)=objResults.Fields("ship3").Value 'ship3elsemid(strRecord,1,1)="D"END IFobjStream.WriteLine(strRecord)TicketID=objResults.Fields("ticket").ValueobjResults.MovenextWend

View 2 Replies View Related

Error '800a03eb' Type Mismatch

May 11, 2006

Hi, myself palak.

I m working on event organizer website,its running ASP pages on windows 2003 server with SQL server 2000. I have upgraded SP2 for SQL server to SP4 in maintance process.

The problem accur with some ASP pages are

server_errors [server_Errors] GetErrorMessage [serverSERVER version 1.0.0] error '800a03eb' Type mismatch

/server/asp/cmfls/errorconfirmation.asp, line

There may be permission /security issues related with database.help me to troubleshoot my problem.

View 1 Replies View Related

T-sql Data Type Conversion Error Handling

Jun 21, 2001

I'm trying to convert a column from a varchar(14) to float, some of the rows contain some non-numeric characters. I've tried to write a cursor to step through the records, run cast(col1 as float) on each record, then use if @@error <> 0 to capture an error but it doesn't work. It steps through fine but when the cast command fails it ends the execution of the script with "Error converting data type varchar to float."

How can i capture this error without having the script fail? Is there another way to get this done?

Thanks,

Jim

View 1 Replies View Related

Date Data Type-Conversion Error.

Jun 22, 2006

Dear friends,

I am struggling to insert a date value in "dd-mm-yyyy" format to SQL server table having datatype as Date/Time.

Regional date setting for Server and Local systems are in dd-mm-yyyy format.

I am using following code

Dim DT As String
DT = Now()
DT = Format(DT, "MM/DD/YYYY")

for the inserting into table using command

ins_comm.CommandText = " INSERT INTO CARD (doe) values("& DT &")"

Procedure will end without any error ,but stored value for the date feild will be garbage value like 1900-01-01.

But if i used mm-dd-yyyy format ,it will get inserted.

What could be the reason,How I can save value in dd-mm-yyyy or dd-mm-yy format

Please help!!!

Graceson Mathew

View 1 Replies View Related

When Trying To Do An Insert, I Get Implicit Conversion From Data Type Sql_variant To Uniqueidentifier Is Not Allowed. Use The CONVERT Function To Run This Query

Jan 4, 2008

Im getting this error below when I try to do an insert into my database. I have no idea why this is happening, please help!this is my sqldatasource:<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:myConnectionString %>" DeleteCommand="DELETE FROM [tblDiaryEntries] WHERE [DiaryEntryID] = @DiaryEntryID" InsertCommand="INSERT INTO [tblDiaryEntries] ([DiaryEntry], [Subject], [EntryDate], [UserId]) VALUES (@DiaryEntry, @Subject, @EntryDate, @UserId)" SelectCommand="SELECT [DiaryEntry], [Subject], [EntryDate], [DiaryEntryID], [UserId] FROM [tblDiaryEntries]" UpdateCommand="UPDATE [tblDiaryEntries] SET [DiaryEntry] = @DiaryEntry, [Subject] = @Subject, [EntryDate] = @EntryDate, [UserId] = @UserId WHERE [DiaryEntryID] = @DiaryEntryID"> <DeleteParameters> <asp:Parameter Name="DiaryEntryID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="DiaryEntry" Type="String" /> <asp:Parameter Name="Subject" Type="String" /> <asp:Parameter Name="EntryDate" Type="String" /> <asp:Parameter Name="UserId" Type="Object" /> <asp:Parameter Name="DiaryEntryID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="DiaryEntry" Type="String" /> <asp:Parameter Name="Subject" Type="String" /> <asp:Parameter Name="EntryDate" Type="String" /> <asp:Parameter Name="UserId" Type="Object" /> </InsertParameters> </asp:SqlDataSource> Am I doing something wrong?
Server Error in '/mine' Application.

Implicit conversion from data type sql_variant to uniqueidentifier is not
allowed. Use the CONVERT function to run this query. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Implicit conversion from data type
sql_variant to uniqueidentifier is not allowed. Use the CONVERT function to run
this query.Source Error:

An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:

[SqlException (0x80131904): Implicit conversion from data type sql_variant to uniqueidentifier is not allowed. Use the CONVERT function to run this query.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +859322 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +736198 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1959 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +149 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +903 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +132 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +415 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135 System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +401 System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +447 System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +72 System.Web.UI.WebControls.DetailsView.HandleInsert(String commandArg, Boolean causesValidation) +390 System.Web.UI.WebControls.DetailsView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +623 System.Web.UI.WebControls.DetailsView.OnBubbleEvent(Object source, EventArgs e) +95 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.DetailsViewRow.OnBubbleEvent(Object source, EventArgs e) +109 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +174 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102

Version Information: Microsoft .NET Framework Version:2.0.50727.312;
ASP.NET Version:2.0.50727.833

View 9 Replies View Related

Capturing Data Type Mismatch

Oct 27, 2005

Hi,
Create Table tb_mismatch
(x int)
Create Procedure proc_mismatch
as
begin
insert into tb_mismatch values('s')
if @@error<>0
begin
print ' entered error loop'
end
print 'successfully exited'
end
exec proc_mismatch --executing the proc
Now, when i try to capture the above error its not getting trapped..its directly going to the final end statement.
I have even tried calling subprocedures so that it comes out of the inner procedure and by some means i can move forward in the outer proc,but even that failed.
The proc. is able to capture all the other errors like primary key violation,binary data truncated etc but not the datatype mismatch error (mainly int with varchar...)
any ideas are highly appreciated.
Thanks & regards,
Pavan.

View 8 Replies View Related

Data Type Mismatch -- SSIS

Mar 5, 2007

Hi All,
I am moving some numerical data from SQL server to excel. After the data is moved, i am getting green flag in excel cell to which the data is moved. I have configured the excel column to accept only numbers, but still i am getting green flag in excel cells. When i click the cell i am getting this message "The number in the cell is formatted as text or preceded by a apostrophe"

Can anyone tell me how can i over come the issue.

Thanks
Anwar

View 4 Replies View Related

Data Type Mismatch On Criteria

Oct 8, 2007

I have a data flow that is updating an Access database using an OLD DB Command control. I am getting this error and have narrowed it down to a column the Access table called CreateDate. I don't think this is a reserved word, but even surrounding it in [] did not resolve the problem. The column from SQL Server is called order_date and is a datetime and the destination column createdate is a datetime in Access. When I remove this column fromt he insert command, it works fine but when included, it gives the data type mismatch on criteria error. Any ideas?

View 3 Replies View Related

DTS Package Error W/SaveToSQLServer - Type Mismatch

Apr 25, 2000

I am programatically loading a template DTS package that imports a text file to SQL Server. I change the properties (source, destination, ...), SaveAs to a new name, and then SaveToSQLServer. The package itself is good, I can programatically execute it and it works, but when it gets saved to SQL Server someting gets corrupted. When I try to open the package or manually execute it, I get a DTS Package error w/Description: Type mismatch. This problem is not constant. Sometimes dozens of packages can be programatically "Saved as" with not even one being corrupted. Currently, I am unable to get a single one to be successful.

This is a big problem for me because the package gets programatically scheduled to a Job in SQL Agent. I have placed the DTS "save as" creation into a loop that loads it and checks for an error. If the error occurs, it is removed from SQL Server and recreated. My loop is currently running forever instead of for seconds.

Help! What have I done wrong? What can I try?

View 1 Replies View Related

Bulk Insert Task - Error File

Oct 11, 2007

Using BCP or BULK INSERT you can specify an Error File (-e and ERRORFILE). However this does not seem to be exposed in SSIS via the Bulk Insert Task.

Does anyone know if I'm missing something and the Property is called something else or if can be accessed via script?

Cheers,

-Ryan

View 1 Replies View Related

Error When I Try To Bulk Insert With A Format File

Oct 1, 2007

Msg 4862, Level 16, State 1, Server PATH-SQLDEV, Line 2
Cannot bulk load because the file "c:DATABATCHBCPFormat.fmt" could not be read. Operating system error code (null).

Above is the error I get. The problem is I do not know what is causing this error. It occurs when I attempt to use SQLCMD with bulk insert.

I am using SQLserver 2005 and I have a similar set up in a test database that works, why this format file does not is beyond me, but my experience is when the format file has an error in it, such as a mispelled datatype or a incorrect column number, the error will zero in on that, rather then declare the entire file unreadable. Furthermore if I go into the file, change something so where it is incorrect (like a column number) it will zero in on that error. So I know that the format file can be read. If I knew what this error was all about I would at least know where to begin in fixing it. I have also tried using a very small sample file for the data being inserted. Same error.

Please help

View 2 Replies View Related