I am new to stored procedures and T-SQL so please stick with me. I have a table that holds information about companies. I am trying to write a stored procedure that when run will query that table and find out if there are more than one entry of that company. All company names in that table must be unique (they can only occur once), if they occur more than once I need to flag it for reporting.
So what is the best way to go about this? Essentially what i was thinking was doing a select * on the table and then going from the first entry to the last and at each entry running a select * from table where companyname = @nameofcompany. @nameofcompany would be the name for that entry. If the select statement revealed more than one entry then i would know there was a problem.
Like I said I am new and this is probably very simple but i need a little help getting started
Hey all - VERY new to SQL so I apologize if I butcher normally trivial things :)
Looking to run a query that will retrieve the number of results returned from a select statement...
Currently have a LicenseID table with a Software column...the statement that works on it's own that i've got is:
SELECT * FROM Software WHERE LicensesID = 2
Currently when I run that with the data so far I get 4 results returned to me...how can I add to that statement so that instead of displaying the results themselves, I just get the number 4 returned as a total number of results?
I have a table with three columns. Name, book#, category.
I need to write a select statement that looks at the book# and category and returns all the names that match that into one joined our combined result. So if my name column had john, Jane, Jim, jack, and Steph in unique rows that matched it would bring back a resulted formatted as. John, Jane, Jim, jack, Steph. So I could place that in a field for reference.
I am using the following conditional select statement but it returns no results.
Declare @DepartmentName as varchar Set @DepartmentName = null Declare @status as bigint Set @status = 4 IF (@DepartmentName = null) BEGIN
SELECT CallNumber AS [Call Number], Problem, Solution, Note FROM AdminView WHERE (Status = @status) ORDER BY CallLoggedDT END ELSE IF (@DepartmentName <> null) Begin
SELECT CallNumber AS [Call Number], Problem, Solution, Note FROM dbo.AdminView WHERE (Status = @status) AND (DepartmentName = @DepartmentName) ORDER BY CallLoggedDT end
when i run the 2nd half by itself it tells me to declare @status but not @departmentname. whats going on???
I have the following SELECT statement attached to a dropdown box: SELECT [Workshop] FROM [Workshops] WHERE Workshop <> (SELECT Workshop FROM Workshop_Registration WHERE FullName = @FullName AND Completed = @Completed) ORDER BY [Workshop] I am trying to get all workshops (50 or more) from the WORKSHOPS table that the logged in user is not already registered for. This works perfectly as long as the student is registered for at least 1 class. It populates the dropdown with all of the other classes. If they aren't registered for a class then it doesn't list any classes. The problem is definitely the subquery, but how do I make it to where if the subquery doesn't return any results (student not registered for anything), I get all of the workshops in the dropdown? Any help is appreciated! MikeD
Hello,I have written a stored procedure where I prompt the user for the Year and the Month (see below)How do I take the variable @TheMonth and find out how many days is in the month and then loop to display a total for every day in the selected month.Can someone please point me in the right direction. CREATE PROCEDURE crm_contact_frequency_report @TheYear varchar(4),@TheMonth varchar(2) AS SELECT /* EMAILS (B) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode = 1)) AS Total_EmailOutgoing, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode = 0)) AS Total_EmailImconing, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode IS NULL)) AS Total_EmailNotListed, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth)) AS Total_All_Emails, /* PHONE CALLS (C) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode = 1)) AS Total_CallOutgoing, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode = 0)) AS Total_CallIncoming, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode IS NULL)) AS Total_CallNotListed, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth)) AS Total_All_Calls, /* FAXES (D) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode = 1)) AS Total_FaxOutgoing, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode = 0)) AS Total_FaxIncoming, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode IS NULL)) AS Total_FaxNotListed, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth)) AS Total_All_Faxes FROM CampaignResponse AGO
SELECT - 1 AS OrganisationID, '--Please Select--' AS OrganisationName UNION ALL SELECT OrganisationID, OrganisationName FROM tblOrganisation ORDER BY OrganisationName
I need to insert data into a table based on the results returned by a select statement. Basically, the select statement below gives me a list of all the work orders created in the last hour.
select worknumber from worksorderhdr where date_created > DATEADD(HOUR, -1, GETDATE())
This might return anywhere between 5 and 50 records each time. What I then need to do is use each of the work numbers returned to create a record in the spec_checklist_remind table. The other details in the insert statement will be the same for each insert, it's just the worknumber from the select statement that needs to be added to the insert where the ?? are below:
I need to run a stored procedure on all the results of a select query.For a simplified example, I'd like to be able to do something likethis:SELECT JobID, QtyToAddFROM JobsWHERE QtyToAdd > 0Then for the results of the above:EXEC sp_stockadd @JobID, @QtyToAddWhere the above line ran for every result from the above select query.Anyone able to shed some light on how to do this?Many thanks,James
I'm trying to delete the selected data from a table colum from a select statement.
This is the select statement
SELECTÂ RFC822Â FROMÂ SQLGOLDMINE.DBO.MAILBOX MB WHERE ((MB.CREATEON >= '2014-07-24' AND MB.CREATEON <= '2015-07-24') OR (MB.MAILDATE >= '2014-07-24' AND MB.MAILDATE <= '2015-07-24')) AND (MB.MAILREF LIKE '%auction notification & invitation%')
What the delete statement would look like. I've tried replacing Select with delete from but get a sytax error.
I am fairly new with SQL and still learning. I have used a case statemtent for a column in my select list and want to use the results of that statement's field in my WHERE clause but it is not working for me. Here is the code I have so far:
SELECT l.loanid, p.investorid, l.duedate, case when pc.duedate >= l.duedate then pc.duedate end as RateDueDate, pc.interestrate FROM loan l inner join participation p on p.loanid = l.loanid inner join paymentchange pc on pc.loanid = l.loanid where p.investorid = '12345' and RateDueDate is not null order by l.loanid, pc.duedate
I want to put the results of this case statment in my where clause like highlighted above but it is not working because RateDueDate is not an actual column in the table. Any help would be greatly appreciated.
I have a query that returns results based on information in several tables. The problem I am having is that is there are no records in the one table it doesn't return any information at all. This table may not have any information initially for the employees so I need to show results whether or not there is anything in this one table. Here is my select statement: SELECT employee.emp_id, DATEDIFF(mm, employee.emp_begin_accrual, GETDATE()) * employee.emp_accrual_rate - (SELECT SUM(request_duration) AS daystaken FROM request) AS daysleft, employee.emp_lname + ', ' + employee.emp_fname + ' ' + employee.emp_minitial + '.' AS emp_name, department.department_name, location.location_name FROM employee INNER JOIN request AS request_1 ON employee.emp_id = request_1.emp_id INNER JOIN department ON employee.emp_department = department.department_id INNER JOIN location ON department.department_location = location.location_id GROUP BY employee.emp_id, employee.emp_begin_accrual, employee.emp_accrual_rate, employee.emp_fname, employee.emp_minitial, employee.emp_lname, department.department_name, location.location_name ORDER BY location.location_name, department.department_name, employee.emp_lname
The section below is the part that may or may not contain information: SELECT (SELECT SUM(request_duration) AS daystaken FROM request) AS daysleft
So I need it to return results whether this sub query has results or not. Any help would be greatly appreciated!!! TIA
I have a stored procedure on a SQL Server 2008 database. The stored procedure is very simple, just a SELECT statement. When I run it, it returns 422 rows. However, when I run the SELECT statement from the stored procedure, it returns 467 rows. I've tried this by running both the stored procedure and the SELECT statement in the same SSMS window at the same time, and the behavior is the same. The stored procedure is:
USE [REMS] GO /****** Object: StoredProcedure [mobile].[GetAllMobileDeviceUsers] Script Date: 12/04/2014 */ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON
[Code] ....
When I do this in the same SSMS window:
exec mobile.GetAllMobileDeviceUsers
SELECT ee.EmployeeID, EmployeeName = LastName + ', ' + FirstName FROM EmployeeInvData ee --UNION
[Code] ....
I get two result sets. The first is 422 rows; the second is 467 rows. Why?
I’m really scratching my head with this Transact-SQL, say you wanted to cycle through a set of rows, then perform an operation on each row, so in VB/DAO it might look like this: Dim rsTables As Recordset, rsIndex As Recordset Set rsTables = dbSource.OpenRecordset("SELECT * FROM INFORMATION_SCHEMA.tables") Do While rsTables.EOF Set rsIndex = dbSource.OpenRecordset("Select * From SysIndexes Where Name = '" & rsTables!Table_Name & "'") DoSomethingToIndex rsIndex!Name rsTables.MoveNext Loop
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
I have the following stored procedure set up as a startup procedure in the master database. I was lead to it from a microsoft SQL server news group and I have found that it is very helpful. I have been told, though, that it only runs on the master database at startup, but I need it to run for all of the databases on my server. (I'm a newbie and can't follow the code myself). How can this stored proc be modified so that it runs on all of the databases on my server at startup.
Any help is greatly appreciated. Thanks in advance!
CREATE PROC sp_checkident AS /************************************************** ******************/ /* Procedure to run DBCC CHECKIDENT for a database. */ /* Copyright (c) Tibor Karaszi and B÷rje Carlsson 1999 */ /* Tested on version 6.5 and 7.0. */ /************************************************** ******************/ SET NOCOUNT ON
DECLARE @ver VARCHAR(5) SELECT @ver = CASE WHEN CHARINDEX('6.50', @@VERSION) > 0 THEN '6.50' WHEN CHARINDEX('7.00', @@VERSION) > 0 THEN '7.00' END -- Remove below IF statement if you want to execute on 7.0 IF @ver = '6.50' BEGIN DECLARE tbl_names INSENSITIVE CURSOR FOR SELECT OBJECT_NAME(sc.id) FROM syscolumns sc, sysobjects so WHERE sc.id = so.id AND convert(bit, sc.status & 0x0080) = 1 AND so.type IN ('U', 'S')
OPEN tbl_names DECLARE @tbl_name VARCHAR(30) DECLARE @exec_str VARCHAR(255) FETCH NEXT FROM tbl_names INTO @tbl_name WHILE (@@fetch_status <> -1) BEGIN IF (@@fetch_status <> -2) BEGIN SELECT @exec_str = 'DBCC CHECKIDENT (''' + @tbl_name + ''') WITH NO_INFOMSGS' PRINT @exec_str EXEC( @exec_str) END FETCH NEXT FROM tbl_names INTO @tbl_name END DEALLOCATE tbl_names END
Hi all, I copied and executed the following sql code in my SQL Server Management Studio Express (SSMSE): --SELECTeg8.sql from SELECT-Using correlated subqueries of MSDN2 SELECT Examples--
USE AdventureWorks ;
GO
SELECT DISTINCT Name
FROM Production.Product p
WHERE EXISTS
(SELECT *
FROM Production.ProductModel pm
WHERE p.ProductModelID = pm.ProductModelID
AND pm.Name = 'Long-sleeve logo jersey') ;
GO
-- OR
USE AdventureWorks ;
GO
SELECT DISTINCT Name
FROM Production.Product
WHERE ProductModelID IN
(SELECT ProductModelID
FROM Production.ProductModel
WHERE Name = 'Long-sleeve logo jersey') ;
GO
========================================= I got: Results Messages Name o row affected ======================================== I think I did not get a complete output from this job. Please help and advise whether I should search somewhere in the SSMSE for the complete results or I should correct some code statements in my SELECTeg8.sql for obtaining the complete results.
select computer, count(*) as MissedCount from WInUpdates_Neededreq WHERE LoggedDate BETWEEN DATEADD (DAY, - 5, GETDATE()) AND GETDATE() and LastReportTime !< DATEADD (DAY, -5, GETDATE()) group by computer
I need to make a join onto another table but don't want to lose the coutn(*) as MissedCount.
How can I join to another table and still keep the count form the original table. I want ot join to tblogons.workstationname and return computer from the original query...
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
Code Block SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02' FROM myTables WHERE Conditions are true ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02' INTO AuxiliaryTable FROM myTables WHERE Conditions are true ORDER BY Field01 SELECT DISTINCT [Field02] FROM AuxTable The the results are:
Field02
----------------------
22810 8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760 22810
Is there any good suggestion? Thanks in advance for any help, Aldo.
Hello How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement. <% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>" ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)"> <SelectParameters> <asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" /> </SelectParameters></asp:SqlDataSource> any help would be appreciated
I have one query which uses a join query to gather all the projects that should show up in someone's list over a period of time (returns and id (int) and name (varchar) paired dataset). I want to do a separate query that takes that list and selects all projects (same paired set ... id and name) EXCEPT where it matches an id on a row of the given result set. The one query looks like this ..DECLARE @startDate datetimeDECLARE @endDate datetimeDECLARE @userId UNIQUEIDENTIFIERSELECT @startDate = ppStartDate FROM ppTablewhere payPeriodID = @payPeriodIDSELECT @endDate = ppEndDate FROM ppTable WHERE payPeriodID = @payPeriodIDSELECT @userId = userID FROM usersTable WHERE userName = @userNameSELECT DISTINCT p.projectID, p.projectNameFROM projectsTable pLEFT JOIN projectMemberhsip m ON m.ProjectId = p.ProjectIdLEFT JOIN timeEntryTable t ON t.ProjectID = p.ProjectIdWHERE t.TimeEntryUserId = @userID AND t.TimeEntryDate >= @startDate AND t.TimeEntryDate <= @endDateORm.UserId = @userID I want to get the same selection from projectsTable WHERE it's not anything from this result set.Haven't been able to get it by modifying the WHERE logic. Is there a way to select all WHERE id != (resultSet from this SELECT)? TIA!
Hello friends, I want to use select statement in a CASE inside procedure. can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID, CASE E.EmployeeType WHEN 1 THEN select * from Tbl1 WHEN 2 THEN select * from Tbl2 WHEN 3 THEN select * from Tbl3 END FROM EMPLOYEE E
can any one help me in this? please give me a sample query.
I am trying to format the Sys field (which is Int) in case the first byte is zero. But I'm getting an error msg; Msg 156, Level 15, State 1, Procedure sp_Pull_Cancels, Line 43 Incorrect syntax near the keyword 'Right'.
CASE WHEN substring(PCRACT, 5, 1) = '4' THEN 3641 WHEN substring(PCRACT, 5, 1) = '5' THEN 2012 WHEN substring(PCRACT, 5, 1) = '6' THEN 9694 END as Right('0000' + Cast(Sys as varchar (4)),4)
Any ideas how I construct this CASE statement to get the desired results.
Hi, I have three tables: 1 Order Details 2 Product Info 3 Received Qty
The query is pretty simple however I'm getting incorrect results.
The query grabs a load of information (including a SUM statement) from the order details tbl.. this is INNER JOIN ed to the products tbl to match an ID field which grabs some extra info from the product info tbl.
all fairly straightforward and works without a problem..
However I now need to add in the received qty tbl (as the name suggests this keep a track of the qty's of items received)
I need to join this tbl to the order details tbl based on a unique ID from the orders tbl and then SUM together all of the entries in that received qty tbl for that item.
Result is I get a single record which shows the qty ordered (from the order details tbl), and the total received (from the received qty) tbl
These are held in a seperate tbl as an order can be deliveryed in several stages.
Here is my statement:
SELECT PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID, dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem, dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived, SUM(dbo.Suppliers_POs_Details.Qty * dbo.Suppliers_POs_Details.PricePerItem) AS LineTotal, SUM(dbo.Suppliers_POs_Details_Received.Qty) AS QtyReceived FROM dbo.Suppliers_POs_Details INNER JOIN PDS_Login.Supplier_Products ON dbo.Suppliers_POs_Details.ProductID = PDS_Login.Supplier_Products.ProductID LEFT OUTER JOIN dbo.Suppliers_POs_Details_Received ON dbo.Suppliers_POs_Details.PODetailsID = dbo.Suppliers_POs_Details_Received.PODetailsID WHERE (dbo.Suppliers_POs_Details.POID = @POID) GROUP BY dbo.Suppliers_POs_Details_Received.Qty, PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID, dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem, dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived, dbo.Suppliers_POs_Details_Received.Qty
The problem is, if there is more than one relating record in teh Received Qty tbl instead of that being added together as I want, two results appear...
It's obviously something simple but I can't seem to figure it out - anyone point me in the right direction?
