Data Load From The Different Server
Aug 21, 2007I tried to load data from the table in different server.
If I just want to limit one year data ( using date_key in that table ) then what task do I need to do that?
Please let me know.
Thanks.
ADVERTISEMENT
Not Able To Load The Application In Case Web Farm Garden When We Load Data Through Background Thread.
Dec 14, 2007Hi,
Here I will describe my problem.
1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance.
2. Now when we put the application on web farm garden, it is not able to load the application.
3. We are sending the request the servers through Router kind of application.
4 This application is working fine on single server enviornment.
Please help us.
Ajay Kumar Dwivedi
Load All Data Without Knowing Old One Was Load In The Previous Time???
Apr 27, 2007I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???
I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?
Thank
SQL Server 2012 :: How To Load Historical Data From Old System Into A New One
Aug 12, 2014I want to load historical data from an old system into a new one.Thing is, that old system stored dates as Datetime and the new one uses DateTimeOffset.
All data was collected in the same Time Zone... but with the Daylight Saving Time (DST)
The offset is either +04:00 or +05:00, based on the calendar date. To add to the complexity, the rules for DST changed a couple of years ago.
To determine the offset, I'd need to know what was or would have been the server Timezone for each historical date.
SQL Server 2008 :: Incremental Load Only Required Data?
Apr 30, 2015I have a table in Server A and it has 5 columns. One is Address & ID, CreateDatetime,..
I need to transfer data from this table from Server A to server B for a report pupose. The Address column in this table has some places two address in the table. I am giving ex below
Address
Houston, Dallas
Redmond
Sacramento
New Jersey, New York
I want to avoid the rows where address are two Houston, Dallas & New Jersey, NewYork to the destination table in server B and need to do incremental loads.
how to proceed with this?
The version we are using is Sql Server standard edition 2008r2
Transact SQL :: Load JSON Type Data To Server
Jan 15, 2012Tried loading JSON data to Sql Server ? Sample format is given below..Don't see any easy way doing it except writing some C# code deserialize it.
[ {
"name" : "peter_2.jpg",
"createdDate" : 1259728960000,
"lastModifiedDate" : 1308174976000,
"Secondary" : [ {
"Id" : 106275817,
"Sid" : 1
[code]...
Equivalent Of Load Data Infile Of MySQL In SQL Server 2005?
Aug 1, 2007hey all,
i want to know Equivalent of Load Data Infile of MySQL in SQL Server 2005?
in mysql we can direclty load file with Load Data infile query.
my question is how to do this in sql server 2005?
thanks.
SQL Server 2008 :: Verify Partition Data Load Syntax
Feb 28, 2015What is the syntax to verify that the partition data is loaded into the correct partition.
View 0 Replies View RelatedSQL Server 2008 :: Verify Partition Data Load Syntax?
Mar 2, 2015What is the syntax to verify Partition data load.
View 1 Replies View RelatedSQL Server 2008 :: Load Data For Yesterday And Specific Date
May 31, 2015I have a ssis package, which runs on date parameter. If we dont specify the date it always load data for yesterday's date. And if we give any specific date like '2015-05-10', It should load for that date. How can we achieve this dynamically (using package configuration)? Once we load for any specific date, package should be set for yesterday's date dynamically. How to achieve this as I am new to SSIS.
View 2 Replies View RelatedSQL Server 2012 :: Bulk Load Data Conversion Error (truncation)
May 15, 2014Is there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.
I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.
SQL Server Admin 2014 :: Automatically Daily Load Data From Oracle?
Oct 7, 2015how to load the data from oracle to sql server
oracle source is having 7 tables
sql server target is having 7 tables
i have used VISUAL STUDIO and created the one data for individual but how to run in sql server that ssis package
Integration Services :: Extract Data From Server And Load Into Oracle Database?
Jun 23, 2015Looking for sample ETL package to extract data from SQL Sever Database and load into Oracle Database using SQL SERVER INTEGRATION SERVICES 2008. The requirement is for full load and incremental load both.
View 5 Replies View RelatedSQL Server 2012 :: How To Write Stored Procedures To Load Data Model From OLTP To DWH
Nov 24, 2014How to write Stored Procedures to load the Data Model from OLTP to DWH ?
View 9 Replies View RelatedPower Point :: Error - Cannot Locate A Server To Load Workbook Data Model
Aug 30, 2014I get this error when I open powerpivot documents in sharepoint.
"We cannot locate a server to load the workvbook Data Model."
after I've looked into the logs I came up with this:
Check Server Version (SQLSERVER2012POWERPIVOT): Fail (Expected: >=11.0.2800.0, Actual: 11.0.2100.60).
--> Check Deployment Mode (SQLSERVER2012POWERPIVOT): Pass.
MonitorableCheck Server Configuration (SQLSERVER2012POWERPIVOT): Fail (Uninitialized, ConfigurationError, WrongVersion).
SSPM: Initialization failed on server SQLSERVER2012POWERPIVOT: Microsoft.AnalysisServices.Streaming.ServerConfigurationException: Server SQLSERVER2012POWERPIVOT failed configuration checks (Status = Uninitialized, ConfigurationError, WrongVersion). at Microsoft.AnalysisServices.Streaming.OnPremise.Server.AssertServerConfiguration(Server amoServer, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Initialize(Guid serviceId, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Tasks.InitializationTask.Run(CancellationToken ctx)
how can I update my analysis server version that doesn't affect anything else?
should I install a CU on my SQL or upgrade it?
Integration Services :: Working On SSIS To Load Data From Flat File To Server
Jun 17, 2015I'm working on SSIS to load the data from flat file to sql server, I'm getting date in below format, but in sql server I have given data type datetime. how to convert below format to 16-01-15 12.05.19.1234 AM.
View 4 Replies View RelatedIntegration Services :: Load Data From Excel 2007 Version Into Server 2014
Aug 5, 2015I am trying to load data from Excel 2007 version into SQL server 2014 DB. I am getting below error" SSIS Error Code DTS_E_CANNOTACQUIRE CONNECTION FROM CONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed".I have tried all options like changing Delay Validation is TRUE and in properties i changed runtime 64 bit to FALSE but still getting above error.
View 3 Replies View RelatedFailed To Find Or Load The Registered .Net Framework Data Provider When Using SQL Server Compact Edition
Jul 3, 2007Hello
I have recently downloaded Orcas beta VS product and had no previous version of VS before. The install went clean and I have been able to generate Window apps and web apps with very little issues; however, I have one issue with running a web app using the "view in browser" option for checking an aspx page for validity. If I use the default Northwind database provided and generate an aspx form using the "DataSet" toolbox widget, the tool prompts for the datasource etc. required to generate the required code. I can select the Northwind database and select the desired columns from one of the tables. Once completed, I build the project (clean build) and then select the "view in browser" option to verify the results. The result is an error page indicating a server error ->
Failed to find or load the registered .Net Framework Data Provider.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Configuration.ConfigurationErrorsException: Failed to find or load the registered .Net Framework Data Provider.
I created on odbc connection to an iSeries(as400) box and was successfull in displaying the table on the webpage! I looked into the web.config file and it appears that all the required XML data is present. Any help would be appreciated as I am fairly green when it comes the .NET world.
Thanks
SQL Server 2012 :: Unable To Load Data From Flat File To Table Using Bulk Insert Statement
Apr 3, 2015I am unable to load data from flat file to sql table using bulk insert sql statement
My code:-
DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'
[Code] .....
How Load Data From One Server To Another Server
Jun 10, 2008I have Server1,server2( local servers)
these severs are in network
server1 is the live server(database and application)
server2 is the local database server
End users useing application enter data into(server2),here lote of Transactions going everyday
I need to load data from server2(Local DB Server) to server1 Periodically in daily or hourly basis.
Data Access :: How To Load Data From CSV File In Temp Table At Run Time
May 28, 2015how I can load the CSV file data into the sql server table. I know there are ways like bulk insert and other to load the csv file data into the table. But in my case the table doesn't exist and has to be created at the run time. With simple insert in temp table we do like select * into #temp from tablename and that creates the temp table. So. I need something like that which create the temp table and load the data into it. because the CSV file would have different number of columns and names so I can not create the table structure in advance. I have to create the table at run time.
View 3 Replies View RelatedT-SQL (SS2K8) :: Load Data From Flat File Source Into OleDB Destination By Changing Data Types In SSIS
Apr 16, 2014I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies View RelatedData Load
Jun 20, 2001Hi!
We make complete data load once a week. Now we need to make additional steps to append data on daily basis. We have primary key on the table and it doesn't allow appending duplicate rows.
What steps should we create to append data?
Thank you,
Elena.
LOAD Data
Oct 23, 1999Hi everobody!
When I run :
LOAD DATABASE db1
FROM DISK = 'c:mssqldatadb1_backup.dat'
go
I got error message:
Msg 3201, Level 16, State 1
Can't open dump device 'c:mssqldatadb1_backup.dat', device error or device off line. Please consult the SQL Server error log for more details.
How can I fix the problem?
Thank you.
Alona
Need To Load Data From A Client To SQL.
Nov 13, 2005I'm needing to load data on the client side to load into a DataGrid. I decided to use excel to load the data, but it doesn't need to be. My problem is that it only loads from the server not the client. I browse to find the file and get the path with a control named ctlFindFile. A button labeled ctlLoadData will when pressed display the pathway in label1 and also place the pathway in the function GetDataFromExcel which returns a dataset from the spreadsheet and displays the data in a dataset. Data is returned fine if I’m on the server, but when I'm on a remote machine I receive an error. That is unless I've place a spreadsheet with the same name and pathway on the server as on the client machine, then I’m able to load the file. Now how do I get it to load from on the client machine?
Code below:
Private Sub ctlLoadData_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ctlLoadData.Click
Label1.Text = ctlFindFile.Value
DataGrid1.DataSource = GetDataFromExcel(ctlFindFile.Value, "SampleNamedRange").Tables(0)
DataGrid1.DataBind()
End Sub
Public Function GetDataFromExcel(ByVal FileName As String, ByVal RangeName As String) As System.Data.DataSet
'Returns a DataSet containing information from a named range in the passed Excel worksheet
Try
Dim strConn As String = "Provider=Microsoft.Jet.OLEDB.4.0;" &_ Data Source=" & FileName & ";Extended Properties=Excel 8.0;"
Dim objConn As New System.Data.OleDb.OleDbConnection(strConn)
objConn.Open()
' Create objects ready to grab data
Dim objCmd As New System.Data.OleDb.OleDbCommand("SELECT * FROM " &_ RangeName, objConn)
Dim objDA As New System.Data.OleDb.OleDbDataAdapter
objDA.SelectCommand = objCmd
' Fill DataSet
Dim objDS As New System.Data.DataSet
objDA.Fill(objDS)
' Cleanup and return DataSet
objConn.Close()
Return objDS
Catch ex As Exception
' Possible errors include Excel file already open and locked, et al.
Return Nothing
End Try
End Function
Error on Client:Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error:
Line 31: Private Sub ctlLoadData_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ctlLoadData.Click
Line 32: Label1.Text = ctlFindFile.Value
Line 33: DataGrid1.DataSource = GetDataFromExcel(ctlFindFile.Value, "SampleNamedRange").Tables(0)
Line 34: DataGrid1.DataBind()
Line 35: End SubSource File: C:InetpubwwwrootSAI_LoadWebForm1.aspx.vb Line: 33 Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
SAI_Load.WebForm1.ctlLoadData_Click(Object sender, EventArgs e) in C:InetpubwwwrootSAI_LoadWebForm1.aspx.vb:33
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +108
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +57
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain() +1292
Version Information: Microsoft .NET Framework Version:1.1.4322.2032; ASP.NET Version:1.1.4322.2032
Load Data Command
Dec 14, 2007Hi foks!
In MYSQL I can insert a whole text/excel/csv file with the Load Data command. Can I do such a thing for MSSQL?
Thank you!
Monitoring Data Load
Jan 16, 2007I have a user that is loading data via an Access load procedure to a table that actually is a SQL Server 2005 table but is linked to the Access database. He is saying the load is extremly slow. How can I monitor what it is doing on the SQL Server side?
Thanks!
duckman2007
Have a great day!
Load Data Command
Dec 14, 2007Hi foks!
In MYSQL I can insert a whole text/excel/csv file with the Load Data command. Can I do such a thing for MSSQL?
Thank you!
Data Load Query
Sep 21, 2005Hi,I'm extracting data from a mainframe application with a view to loadingit into a MS SQL database. I'm trying to determine the most efficientway to format the mainframe extract file to make loading into thedatabase easier.The problem I have is that the existing record structure includes anarray that can vary between 1 to 50. If I include this array in asingle record the table I use to import the data would need 50 columnsthough not all these would be populated. There is a field in the recordto identify how many occurances of the array there are.Current Record Structure :Account NumberAccount NameOther Account DetailsTotalNumberOfArrayFieldsPopulatedArray :Value1Value2Value3....up to Value50 (if required)i.e.12344,Mr Agent,$29.95,2,BX123,BX12412345,Mr Jones,$14.95,3,XX123,XX124,XX12512345,Mr Jones,$14.00,1,XY12312345,Mr Jones,$15.95,2,XZ124,XZ12512346,Mr Smith,$19.95,3,AX123,AX124,AX12512346,Mr Smith,$19.00,1,BY12312347,Mr Acant,$99.95,7,CX123,CX124,CX125,CX126,CX127,CX128 ,CX129There may be up to 3 records created for each Account Number withdifferent values in the array fields.Am I better to break this file into two files .. one with the corecustomer information and a second file with a row for each array valuewhich has a link to the customer information file.OrIs there a way to efficiently process the original file once it isloaded into the staging tables in the database ?i.e.File 1 - Core Customer Information====================================Current Record Structure :Record NumberAccount NumberAccount NameOther Account DetailsTotalNumberOfArrayFieldsPopulatedFile 2 - Array Information====================================Record NumberArray :Value1Value2Value3....up to Value50 (if required)File 1========================12344,Mr Agent,$29.95,212345,Mr Jones,$14.95,312345,Mr Jones,$14.00,112345,Mr Jones,$15.95,212346,Mr Smith,$19.95,312346,Mr Smith,$19.00,112347,Mr Acant,$99.95,7File 2========================12344,BX12312344,BX12412345,XX12312345,XX12412345,XX12512345,XY12312345,XZ12412345,XZ12512346,AX12312346,AX12412346,AX12512346,BY12312347,CX12312347,CX12412347,CX12512347,CX12612347,CX12712347,CX12812347,CX129At times the individual array values will be used for look ups thoughessentially the Customer Information record will be the primary lookupdata.I'm leaning toward changing my COBOL code and creating the 2nd outputunless someone can suggest a simple way to process the information onceloaded into the table.Any help that could be suggested would be greatly appreciated.
View 1 Replies View RelatedUse SSIS To Load Data Into CRM 3.0
Jan 18, 2007Hi,
I have a little experience with SSIS (but a lot with DTS) and none with CRM 3.0.
Is it possible to use SSIS to import flat files into CRM 3.0 ?
And how ?
I read something that CRM 3.0 uses SQL server 2000. Should I upgrade it SQL server 2005 ?
Any suggestion where to read about this ?
Thanks in advance
Constantijn Enders
Load Data From .DAT File
Jul 14, 2006Hi All,
I am using Bulk Insert task to laod data from .dat file to SQL table but getting an error below.
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 1. Verify that the field terminator and row terminator are specified correctly.".
Any help will be appreciated.
Thanks.
Load Data Using ADO.NET In SSIS
Nov 8, 2006Hi,
How to extract and Load Data using ADO.NET in SSIS.i hope to extract data we have DataReader source .but how to load (Insert) data with ADO.NET ?.and is ADO.Net quicker than OLEDB ?
Thanks
Jegan.T
Data Load Problem
Aug 9, 2006Hi all,
I have some data in a CSV file that looks like this:
<Column Name1>, <Column Name2>, <Column Name3>, <Column NameN>
<Column Value1>, <Column Value2>, <Column Value3>, <Column ValueN>
<Blank Line>
<Column Name1>, <Column Name2>, <Column Name3>, <Column Name4>, <Column NameN>
<Column Value1>, <Column Value2>, <Column Value3>, <Column Value4>, <Column ValueN>
The rub is that I don't know how many columns I am going to have but each <Column Name> has a <Column Value>.
I need to load the data into different tables based on the <Column Name>.
Any ideas????
Thanks for all the information this forum has very helpful!!!