Data Provider Or Other Service Returned An E_Fail Status In Sql Server 2005
May 17, 2007
Main_Module.STRCNNN1 = "driver={SQL Server};server=" & Main_Module.Server_Name & ";" & _
"uid=SA;pwd=;database=" & Main_Module.Common_Database
error msg is
runtime error
data provider or other service returned an E_Fail status in sql server 2005
when i am fetching record from view using order by clause in select statement then error is coming
as
select * from vew_emp where grade='C' order empno
at the first time it fetching record with order by
but when i am using recordset.Requiry
it cud not fetch the record
i think when the recordset is open with the record of view
i am deleting ,inserting record in the view base table then the main recordset is not working
without using order by it is running and working well
plz reply me quickly
View 3 Replies
ADVERTISEMENT
May 15, 2007
after converting database from sql server 2000 to sql server 2005. my program on vb6 is facing runtime error. i.e.data provider or other service returned an E_Fail status .
how can i get rid this problem
View 2 Replies
View Related
Apr 22, 2007
Dear all,
I am running an Access adp application with SQL Server 2005 as back end database. I run a query by using Management Studio query window, and it returned correct results with some columns containing NULL value. But when I run this query through MS Access client side, popup an error "Data provider or other service returned an E_FAIL status" and crash the Access application. I moved the database back to SQL Server 2000, and it runs perfect on both client side and server side returning the correct result. This query is important for the application. Please help!!!!
Query as followed:
SELECT TOP (100) PERCENT dbo.VWINFO312FYTRStreamEnrolments.StudentID, dbo.RequiredStreams.StreamType,
dbo.VWINFO312FYTRStreams.StreamCode + CAST(dbo.VWINFO312FYTRStreams.StreamNo AS varchar) AS FullStreamCode,
dbo.DaysOfWeek.DayCode, dbo.VWINFO312FYTRClasses.StartTime, dbo.VWINFO312FYTRClasses.EndTime, dbo.VWINFO312FYTRClasses.Room,
dbo.Tutors.TutorName, dbo.Tutors.PhoneExtn, dbo.Tutors.OfficeHours, dbo.DaysOfWeek.DaySequence, dbo.RequiredStreams.StreamOrder
FROM dbo.RequiredStreams INNER JOIN
dbo.VWINFO312FYTRStreams ON dbo.RequiredStreams.PaperID = dbo.VWINFO312FYTRStreams.PaperID AND
dbo.RequiredStreams.StreamCode = dbo.VWINFO312FYTRStreams.StreamCode INNER JOIN
dbo.VWINFO312FYTRStreamEnrolments ON dbo.VWINFO312FYTRStreams.PaperID = dbo.VWINFO312FYTRStreamEnrolments.PaperID AND
dbo.VWINFO312FYTRStreams.StreamCode = dbo.VWINFO312FYTRStreamEnrolments.StreamCode AND
dbo.VWINFO312FYTRStreams.StreamNo = dbo.VWINFO312FYTRStreamEnrolments.StreamNo LEFT OUTER JOIN
dbo.DaysOfWeek INNER JOIN
dbo.VWINFO312FYTRClasses ON dbo.DaysOfWeek.DayCode = dbo.VWINFO312FYTRClasses.DayofWeek ON
dbo.VWINFO312FYTRStreams.PaperID = dbo.VWINFO312FYTRClasses.PaperID AND
dbo.VWINFO312FYTRStreams.StreamCode = dbo.VWINFO312FYTRClasses.StreamCode AND
dbo.VWINFO312FYTRStreams.StreamNo = dbo.VWINFO312FYTRClasses.StreamNo LEFT OUTER JOIN
dbo.Tutors ON dbo.VWINFO312FYTRClasses.ResponsibleTutor = dbo.Tutors.TutorID
View 4 Replies
View Related
Oct 24, 2006
I'm running sql server ver 7.0 SP4.I have an access project (.adp) that runs a view which is nothing morethan a select statement. Access locks up solid when I try to run thisquery - with NO error messages what-so-ever.If I sign onto the server, and run the view from enterprise manager - Iget:"the data provider or other service returned an E_FAIL status" !?!?!There is NO ERROR number, or further explanation of the message!!Now - this query DID work last week - all of a sudden I get this error- I've:1) repaired / compacted this database2) rebooted the server3) spent several hours searching websites & groups for an explanationa) I don't care how useless some people think enterprise manager is -at least it gave me SOME kind of error; where access just locks up!b) There are no issues with null values, or problem date fieldsanywhere in these tables.4) tried MANY variations on the query, and am now more confused thanever.5) I've RUN THIS QUERY IN AN ACCESS MDB WITH LINKS TO THE SQL SERVER -AND IT WORKS!?!?!?!?The query I'm using follows; if I remove ONE field from the selectstatement - this query RUNS!!!It doesn't matter what field I remove! It's as if, I can only have somany fields in the select statement!?!?!?This is clearly ridiculous since the query ran fine last week with thesame number of fields, not thatthat should have anything to do with this, as sql shouldn't care howmany fields I request.I'm not actually requesting any fields in the last table - but if Iremove this table it works!? If I leave this table, and select fieldsfrom it, but remove another table - again it works!So my questions:1) What [T-] is going on here?2) Why would an mdb be able to run a query that an adp can not!?!?3) When will microsoft ever release a product that provides usefulerror messages?I really don't expect an answer to #3, because I know the answer isNEVER - microsoft doesn't want to make solving problems easy.Here's the query I'm using:SELECT codes.proj_id, answers.report_date,answers.release_date, answers.notes,answers.answer_date, answers.answer_person,answers.answer, answers.answer_status,answers.answer_person2, codes.cust_idFROM dbo.codes LEFT OUTER JOINdbo.demos ONdbo.codes.code = dbo.demos.code LEFT OUTER JOINdbo.answers ON dbo.codes.code = dbo.answers.codeany help appreciated - TIABob
View 2 Replies
View Related
Jul 20, 2005
Anyone knows what would cause this?When Enterprise Manager is used to open a tableRuntime error data provider or other service provided an efail status
View 1 Replies
View Related
Jan 7, 2008
Hi Experts,
I am extracting data from SQL Server 2005 to flat file destination. I am using SQL Command to specify the data selection query. One of my query uses Replicate function to derive a column value. When I execute this package it fails with the error "Data conversion failed. The data conversion for column "value" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page".
The reason for the problem is that, it is taking the InputColumnWidth of the flat file destination as 8000 and I specified the OutputColumnWidth as 4.
If I change the OutputColumnWidth to 8000, it is working without any error but resulting in the column width of 8000.
I tried using DerivedColumn Transformation's Type cast and DataConversion Transformation but still I am getting the same error in the respective Transformation components.
Can anyone suggest how to solve this issue.
View 11 Replies
View Related
Oct 8, 2015
I'm running the following SQL query from LabVIEW, a graphical programming language, using the built in capabilities it has for database connectivity:
   DECLARE @currentID int
   SET @currentID = (SELECT MIN(ExperimentID) FROM Jobs_t WHERE JobStatus = 'ToRun');
   UPDATE [dbo].[Jobs_t]
   SET [JobStatus] = 'Pending'
   WHERE ExperimentID = @currentID;
   SELECT @currentID AS result
<main.img>
This is the analogous code to main() is a C-like language. The first block, which has the "Connection Information" wire going into it, opens a .udl file and creates an ADO.NET _Connection reference, which is later used to invoke methods for the query.
<execute query.img>
This is the inside of the second block, the one with "EXE" and the pink wire going into it. The boxes with the gray border operate much like "switch" statements. The wire going into the "?" terminal on these boxes determines which case gets executed. The yellow boxes with white rectangels dropping down are invoke nodes and property nodes; they accept a reference to an object and allow you to invoke methods and read/write properties of that object. You can see the _Recordset object here as well. <fetch recordset.img>
Here's the next block to be executed, the one whose icon reads "FETCH ALL". We see that the first thing to execute on the far left grabs some properties of the recordset, and returns them in a "struct" (the pink wire that goes into the box that reads "state"). This is where the code fails. The recordset opened in the previous VI (virtual instrument) has a status of "closed", and the purple variant (seen under "Read all the data available") comes back empty.
The rest of the code is fairly irrelevant, as it's just converting the received variant into usable data, and freeing the recordset reference opened previously. My question is, why would the status from the query of the recordset be "closed"? I realize that recordsets are "closed" when the query returns no rows, but executing that query in SSMS returns good data. Also, executing the LabVIEW code does the UPDATE in the query, so I know that's not broken either.
View 3 Replies
View Related
Sep 6, 2007
Hi i am working on sending data from a dat file to table in sql server Database and i am using the Data conversion transformation in ssis to convert string of fixed length into numeric (11,5) which is the datatype for the price field in the table and its returning an error saying that status vale 6 and error text as Conersion Failed sue to overflow of specific type ... Can anyone let me know how to overcome this error.
View 6 Replies
View Related
Apr 11, 2008
Hi
i am try to execute a command " SELECT * FROM [SQLSERVER].[DATABASENAME].[DBO].[TABLE] ".. but i am receiving a error message
Msg 7319, Level 16, State 1, Line 19
The OLE DB provider "SQLNCLI" for linked server "SQLSERVER" returned a "NON-CLUSTERED and NOT INTEGRATED" index "MSmerge_index_1348915877" with the incorrect bookmark ordinal 0.
but when i try to check the linked server it's shows me the linked is okay.. The following command i use to check wethare the link is fine or not..
CREATE TABLE #foo
(
pingResult SYSNAME NULL
);
INSERT #foo
EXEC master..xp_cmdshell
'ping SQLSERVER;
IF EXISTS
(
SELECT 1
FROM #foo
WHERE pingResult LIKE '%TTL%'
)
BEGIN
PRINT 'Feel free to use linked server.';
END
ELSE
BEGIN
PRINT 'Linked server not available.';
END
DROP TABLE #foo;
and Following result i receive..
(13 row(s) affected)
Feel free to use linked server.
Can any One tells me where i m making mistake or how can i resolve this problem
View 5 Replies
View Related
Aug 14, 2007
Hi All,
I have a strange problem with one of my Linked server connections. I am connecting from
SQL Server 2005 Standard Edition (9.00.3042.00) to and Oracle 10g database using the Microsoft OLE DB Provider for Oracle. The connection works and I am able to select from all the Oracle tables except for 1 table. When selecting from this table I get the following error:
OLE DB provider "MSDAORA" for linked server "DBNAME" returned message "ORA-01476: divisor is equal to zero".
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "MSDAORA" for linked server "DBNAME".
This probem happens if the table has rows or has no rows (empty table).
I have tried SELECT * and count(*) along with selecting a specific column from the table.
I can use SQL*plus from the system that the SQL database server running on it and select from the table using the same login/password that the linked server uses to rule out a permissions problem.
Any suggestions on what I can try next?
Thanks.
View 3 Replies
View Related
Jan 12, 2007
In one of my projects, i have been using the SSRS web service to render a report as pdf and then manually emailing it out.
I need to know whether the data set for the report returned any data or not (so that i can avoid emailing the report with a blank report body).
Ofcource this can be done by executing the same query (same as the query for the report) from C# code and checking the count of the resultset, before calling the SSRS Render method. But it might not be an efficient method.
Was wondering the the SSRS Web Service provides an property or method that can let me figure out whether the resultset was empty or not (after the report execution).
Thanks.
View 1 Replies
View Related
Aug 13, 2007
Window Server 2003 R2 Standard Edition (x64) SP1
Sql Server 2000 8.00.2039 SP4 Enterprise Edition (32 bit version)
A linked server is configured to a sql 2000 server and when I execute sql statement SELECT * FROM [LinkedServer].[Database].[dbo].[TableName] it gives following error message: -
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IUnknown::QueryInterface returned 0x80004005: The provider did not give any information about the error.].
In case if anyone has a solution to it, please let me know.
View 3 Replies
View Related
Mar 17, 2008
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
View 2 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 3 Replies
View Related
Jan 14, 2006
Could someone please explain why I get the following errors ?
I have them in 15 out of 20 packages and its always the same, I have tried, removing the columns from the data source but it just seems to jump then to another column.
I have also tried redirecting the errors to a differnet error database but ALL the rows just seem to be errors then
In event viewer I get no further information simply
Event Type: Error
Event Source: SQLISPackage
Event Category: None
Event ID: 12291
Date: 14/01/2006
Time: 14:57:56
User:
Computer:
Description:
Package "Policy_PC" failed.
[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Flat File Source [1]] Error: The "output column "Column 42" (176)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Column 42" (176)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Any input at all is welcome, Im still a newbie at this
View 4 Replies
View Related
Jul 23, 2015
In my database I have an Audit table, that keeps track of teams worked upon the same record in a workflow.I need to find out how many records have been returned to the first team for correction ?The column 'Status' is numbered from 1 to 6 and Column 'EditTime' saves the time when record has been edited.how many records have been returned for correction and identify those records.
View 9 Replies
View Related
Mar 3, 2004
I'm getting this error in a simple DTS package.
No query specification returned by transform status.
Any ideas what's causing this ?
DTS is simply running a query (which returns data via preview)
and insert results into a table.
Thanks
Mark
View 1 Replies
View Related
May 26, 2008
Hi All,
I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.
Can you anyone please provide solution for this?
Thanks in advance,
Anand Rajagopal
View 1 Replies
View Related
Mar 23, 2007
Hi, I'm developing a website using VWD 2005 Express, which needs a Membership system and a products database. Using the VWD inherent Web Site Administration tool makes the membership set up easy but by default it creates a 'Local' SQL database in a folder named 'Apps_Data' in the VWD project. My question is: considering I will need to upload my web site to a Hosting Service, would it be better to change the default so that the membership systems, and the product database I need, are created in an SQL 'Server' database instead of a 'Local' database?
The hosting service I am considering using is having a bit of a problem understanding this question, I hope it makes sense to someone or am I asking a stupid question?
Regards
Sean.
View 2 Replies
View Related
Jun 9, 2008
Hi,I have a stored procedure that makes an MDX query for me, on SQL 2000, service pack 3 it works fine, but on service pack 4 it stops working with the error:Server: Msg 7399, Level 16, State 1, Line 1OLE DB provider 'MSOLAP.2' reported an error. The provider did not give any information about the error.OLE DB error trace [OLE/DB Provider 'MSOLAP.2' ICommandPrepare::Prepare returned 0x80004005: The provider did not give any information about the error.].and i'f i call @@Error I get the error number 7399.Any ideas as to what might be going on? The stored procedure which worked prior to service pack 4 is as follows:CREATE PROCEDURE MDXTester
(
@CustId Varchar(4)
)
AS
IF NOT EXISTS(SELECT * FROM master..sysservers where srvname = 'CZVCube')
BEGIN
EXEC sp_addlinkedserver 'CZVCube',
'',
'MSOLAP.2',
'10.0.41.128',
'CZV'
END
DECLARE @OPENQUERY nvarchar(4000), @MDX nvarchar(4000), @LinkedServer nvarchar(4000)
SET @LinkedServer = 'CZVCube'
SET @OPENQUERY = 'SELECT * FROM OPENQUERY('+ @LinkedServer + ','''
SET @MDX = 'WITH
MEMBER [Measures].[YTD NV] AS ''''Sum(YTD(),[Net Value])''''
MEMBER [Measures].[YTD Prev] AS ''''Sum(YTD(),([Measures].[Net value], ParallelPeriod([Fiscal year], 1, [FiscalYear].CurrentMember)))''''
MEMBER [Measures].[YTD Change] AS ''''[Measures].[YTD NV] - [Measures].[YTD Prev]'''', FORMAT_STRING = ''''###,###.00''''
MEMBER [Measures].[YTD Change Perc] AS ''''[Measures].[YTD Change] / [Measures].[YTD Prev]'''', FORMAT_STRING = ''''###,##0.0%''''
MEMBER [Measures].[Monthly Change] AS ''''[Net Value] - ([Net Value],FiscalYear.PrevMember)'''', FORMAT_STRING = ''''###,###.00''''
MEMBER [Measures].[Monthly Change Perc] AS ''''([Monthly Change] / ([Net Value],FiscalYear.PrevMember))'''', FORMAT_STRING = ''''###,##0.0%''''
MEMBER [Measures].[Annual Change] AS ''''[Net Value] - ([Measures].[Net value], ParallelPeriod([Fiscal year], 1, [FiscalYear].CurrentMember))'''', FORMAT_STRING = ''''###,###.00''''
MEMBER [Measures].[Annual Change Perc] AS ''''([Annual Change] / ([Measures].[Net value], ParallelPeriod([Fiscal year], 1, [FiscalYear].CurrentMember)))'''', FORMAT_STRING = ''''###,##0.0%''''
MEMBER [Measures].[12 mth mov av] AS ''''Avg([FiscalYear].CurrentMember.Lag(11):[FiscalYear].CurrentMember, [Measures].[Net Value])''''
SELECT {[Measures].[Net Value] , [Measures].[YTD NV], [Measures].[YTD Prev],[Measures].[Monthly Change], [Measures].[Monthly Change Perc], [Measures].[Annual Change], [Measures].[Annual Change Perc], [Measures].[YTD Change], [Measures].[YTD Change Per
c], [Measures].[12 mth mov av]} ON COLUMNS,
LastPeriods(12, [FiscalYear].[Apr 08]) ON ROWS
FROM CZV
where [C_CRMID].[' + @CustId + ']'
EXEC(@OPENQUERY + @MDX + ''')')
View 1 Replies
View Related
Apr 11, 2006
I have 2 SQL servers. And in the first one I have added the second SQL as a Link Server. When I run an SQL statement on the linked server I get the following message.
Server: Msg 7202, Level 11, State 1, Line 1Could not find server 'PROD' in sysservers. Execute sp_addlinkedserver to add the server to sysservers.[OLE/DB provider returned message: Deferred prepare could not be completed.]
The SQL statement that I am runnins is
Select * from openquery(PROD,'Select * from PROD.GMS.dbo.qryDispCL')
But when I run only the SQL statement "Select * from PROD.GMS.dbo.qryDispCL" it works perfect. But I need to have the first statement running.
Please help. Your valuable feedback is greatly appriciated.
View 1 Replies
View Related
May 14, 2007
I have a dataflow task. On which I have OLEDB as my source. I connect to my database and execute a stored proc. the stored proc results in a result set with only one row and two columns. First Column is an integer and the second row is a varchar(max) with xml script in it. Not that it should matter because it is in varchar(max).
Anyway, it give me an error
[OLE DB Source [321]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.
What am I doing wrong?
Can I not have a stroed proc that returns a result set as my data source?
View 4 Replies
View Related
Jun 20, 2006
I have a strange problem. I have some code that executes a sql query. If I run the query in SQL server query analyzer, I get a set of data returned for me as expected. This is the query listed on lines 3 and 4. I just manually type it into query analyzer.
Yet when I run the same query in my code, the result set is slightly different because it is missing some data. I am confused as to what is going on here. Basically to examine the sql result set returned, I write it out to an XML file. (See line 16).
Why the data returned is different, I have no idea. Also writing it out to an XML file is the only way I can look at the data. Otherwise looking at it in the debugger is impossible, with the hundreds of tree nodes returned.
If someone is able to help me figure this out, I would appreciate it.
1. public DataSet GetMarketList(string region, string marketRegion)2. {3. string sql = @"SELECT a.RealEstMarket FROM MarketMap a, RegionMap b " + 4."WHERE a.RegionCode = b.RegionCode"; 5. DataSet dsMarketList = new DataSet();6. SqlConnection sqlConn = new SqlConnection(intranetConnStr); 7. SqlCommand cmd = new SqlCommand(sql,sqlConn);8. sqlConn.Open();9. SqlDataAdapter adapter = new SqlDataAdapter(cmd); 10. try11. {12. adapter.Fill(dsMarketList);
13. String bling = adapter.SelectCommand.CommandText;//BRG 14. dsMarketList.DataSetName="RegionMarket"; 15. dsMarketList.Tables[0].TableName = "MarketList"; 16. dsMarketList.WriteXml(Server.MapPath ("myXMLFile.xml" )); // The data written to 17. myXMLFile.xml is not the same data that is returned when I run the query on line 3&4 18. // from the SQL query 19. } 20. catch(Exception e) 21. { 22. // Handle the exception (Code not shown)
View 2 Replies
View Related
Jan 16, 2008
I need to read in general web pages (not a web service) from a typical web site using SSIS and make it available for other SSIS transformations (Script Component). I tried using the XMLSource data source but this appears to require well formed XML, and will not accept HTML which is what I am likely to be getting from the web pages.
I tried a HTTP Connection Manager with a DataReader Source, but seems to only accomodate web services.
Can this be done? If someone has an example (tutorial) of how to accomplish this I would greatly appreciate a copy.
James
View 1 Replies
View Related
Dec 20, 2006
Hello,
I am using 'SQL Server 2005 Reporting Service' in my project. I am using sub-reports in many cases. Whenever I export such reports containing sub-reports to 'Excel' format which is the major client requirement in our project, the exported excel file shows 'Subreports within table/matrix cells are ignored.'
Can anybody tell me the solution for this? If not possible in reporting service then is there any other way to get data in excel format?
Thanks.
-Salil
View 1 Replies
View Related
Jun 26, 2007
Hi,
After reading this helpful blog entry:
http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
I think this might be a good place to ask the following question.
I am writing the error handling code for my data access layer for a web application. I am using the Enterprise Library Data Access Application Block. Although this supports generic database connections, I realized that I need to handle errors specific to each database type. Microsoft SQL is the only database type I am using for now, so I am using a try...catch (SqlException e).
In testing my code, I intentionally changed the instance name in web.config to a name that does not exist. I get the very popular error 26 - Error Locating Server/Instance Specified. This is returned as a SqlException, but the SqlError.Number property is set to -1.
Am I getting "-1" because the provider hasn't actually connected to SQL yet, so it doesn't have an actual SQL error number?
Can I assume that (SqlError.Number == -1) is always a fatal, provider-level connection exception?
Will the provider ever use another SqlError.Number of its own? Or do all numbers besides -1 come from the SQL sysmessages table?.
Is there a comprehensive list of what exceptions might be raised by the SqlClient provider, including #26?
The reason for all the questions is that in a web application, I want to prevent the end-user from seeing the "real" exception if it has to do with configuration errors. However, maybe there are other errors that the user should see and handle? It's hard to know without a full list of SqlClient provider errors, along with the SqlError.Number that each error maps to.
Thanks and regards,
Mark
View 6 Replies
View Related
Nov 2, 2006
Hi,
Does anyone else have this error message pop up in SSMS when you try to parse sql statements:
.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
There was a thread back in March 2006 that mentioned this error, but the posted resolution was to install SP1. I have SP1 installed but I still get the error.
I only receive the error when I'm parsing statements, if I run the statement it's fine.
Thanks
Matt
View 8 Replies
View Related
Jan 28, 2008
Hi I always get good reply from u all, thank you,
I have copied my asp.net website from one server to another. they administrator made necessary modification on IIS manager . and able to see the website on browser. but now i can't loging to system using old password.
I tryed to create new password then also it gives error
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here I have used asp.net login control and membership class. Do I need to make nay changes in code.
I have already modified server name in connection string in web config file.
any one can say what is the problem and how to solve this.
thanks
Pat
View 1 Replies
View Related
Nov 1, 2007
Hi! Im just starting to learn how to use an SQL express database. I used it over at my campus and it worked fine and now when I try running it on my machine it gave me this error :
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connection.(Provider : SQL Network Interfaces, error : 26 - Error locating server/ instance specified.)"
I know that by default SQL express doesnt not support remote connection but when i try to get the service status running, i got another error which is :
"The service did not respond to the start or control request in a timely fashion, you need administrator privileges to be able to start/stop this service. (SQLSAC)"
I am already logged on to the computer as an administrator but i still cant get the service to run! Pls help!
View 1 Replies
View Related
Dec 14, 2006
I'm trying to connect to some info cubes that contain information generated by our APO module. I've got through security but the provider is having problems reading from the source and I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
Could not retrieve the table information for the connection manager 'Data Connection'.
Method not supported.
------------------------------
ADDITIONAL INFORMATION:
Method not supported. (MDrmSap.2)
------------------------------
BUTTONS:
OK
------------------------------
Trouble is, there is very little documentation about this data provider and we don't even know the prerequisites. Has anyone managed to use the data provider successfully?
View 1 Replies
View Related
Apr 18, 2008
Hi ,
I am struck with one issue.Plz help me out if you have any solution for this one.
Details
Front End - Visual Studio 2005
Back End -SQL Server 2000 (Remote database)
Error i am getting is
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 6 Replies
View Related
Mar 22, 2007
I have the following setup
Machine 1
WSS 3.0
Installed Reporting Service Add-in
Machine 2
Reporting Service
Sharepoint Object Model
SQL Server
Sharepoint and Report Server DB
I have congigured Reporting Service for Sharepoint Integrated Mode adn Created new Reprot Server DB
Sahre Point Integration is Green and verified link
In Sharepoint Central Administration
Manage Reporting Service Integratio i have selected the URL and "Trusted Account" as my web applications use "Windows Integration - NTLM".
All services, DB access everything running under one domain user account.
I am logged into sharepoint with same account. When clieck on set server defaults i get following error
An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized.
Same error when i try to add a report to a sharepoint webapplication
The domain account is part of "Farm Administration", "site colletion administrato" and local administrator also on both servers.
Can someone let me know how to fix this.
View 15 Replies
View Related
Dec 5, 2007
Hello,
I have a web service contained in a apache tomcat server and I try to execute a webservice and store the result into a flat file.But I have a message saying me that there is an error in the xml document.
I suppose that it's my wsdl file.
But my wsdl file is fine!!!
Can the error come from the provider of the web service (Apache Tomcat).
I suppose that because in every example on the internet I didn't see an example an tomcat or other web server use.
View 1 Replies
View Related
