hi iam new to writting stored procedures
so anyone please help me out.
i have to transfer data from one table to three other new tables.
and if there are any duplicates in original table i have to send them to
duplicates table.the remaining data should be send to three other tables.
so can anyone help writting stored procedure for this.
thanks for your suggestions and answers
regards
ramya.
Is it possible/advisable when transfering very large amounts of data from server to server to:
trasnfer the data to a new table first
second alter new table adding indexes, defaults, ets based on original table
if it is what flow item would be used to transfer/alter the indexes and defaults?
I'm very new to ssis so the more detail you can give the better.
Thanks
Hi,
I am have a two tables. I want to transfer data from Table1 to Table2 but depending on BRK_TITLE. For example, if BRK_TITLE is "Testing" then table1.BRK_QUANT would go to Table2.Qty1, if BRK_Title ="My Testing" then it would go to table2.qty2 and so on...
but problem is every time BRK_TITLE changes. these are not constant titles(e.g. title may be 'abc', '134' etc)
If data belongs to title3 then it would go to the specific quantity i.e. table2.qty3
Table1:
DB_CONTRACT
ITEM_NO
BRK_TITLE
BRK_QUANT
----
table2:
DB_CONTRACT
ITEM_NO
BRK_TITLE
qty1,
qty2,
qty3,
qty4,
qty5,
qty6,
qty7,
qty8
I hope i convey my point of view?
I'll really appreciate your help
Hi,
I have two tables named Tab1 and Tab2. Both are identical in structure. The only diff is Tab2 has two more additional fields (FromDate and ToDate).
The structure is like below :
Col1
Col2 (Date field)
Col3
Col4
Also Tab 2 have
Col5 (From Date)
Col6 (To Date)
Now I want to transfer some set of reocrds from Tab1 to Tab2. The additional Tab2 field (Col5 and Col6) values should be the minimum and maximum values of Tab1 date field for the current set.
How to accomplish this? Kindly help me in this regard.
Thanks
Somu
Hello, I like to know how to transfer current data displayed in my datagrid into a table in sql server. Any help is much appreciated.Thanks!
View 1 Replies View RelatedHello,
I am transferring data from one SQL table to another. The first table has a PK on the unique id only, the second table has PK on five fields (the idea being to reject duplicate records etc. etc.). I am using a DTS package to do this, but when run it will fail when it hits a PK violation. How do I getround this??????? What simple thing am i missing??
TIA DVNC
When executing an inline insert into command from isqw/w the command executes perfectly. Yet when I try to create a stored procedure with exactly the same insert into statement it will not create. It does not like the database.owner.table prefix on the selected rows. Any suggestions ??
Thanks.... Tom
Transfer tables with Data from one database to another one on a same server?
View 10 Replies View RelatedHi,
I have a Users table in Oracle database and same table (Users) in SQL Server 2000 database. I want to create a DTS Package through which I can copy the data from Oracle database to SQL Server 2000 database. This package should run automatically at mid-night daily so that if there are some entries done in Oracle database then it get copied in SQL Server 2000 database. Also is there any way to copy only those entries from Oracle database which are not present in SQL Server 2000 database. Please help me in this regard as I am new to DTS.
Thanks
Rohit
What is the best way to transfer data from the staging table into the main table.
Example:
Staging Table Name: TableA_satge (# of rows - millions)
Main Table Name: TableA_main (# of rows - billions)
Note: Staging table may have some data same as the main table.
Currently I am doing:
- Load data into staging table (TableA_stage)
- Remove any duplication of rows from the staging table (TableA_stage)
- Disable all indexes on main table (TableA_main)
- Insert into main table (TableA_main) from staging table (TableA_stage)
- Remove any duplication of rows from the main table using CTE (TableA_main)
- Rebuild indexes on main_table (TableA_main)
The problem with the above method is that, it takes a lot of time and log file size grows very big.
I have two database(MYDB1 , MYDB2) on two different server's(SERVER1 , SERVER2) . I want to create an store procedure in MYDB1 on SERVER1 and get some data from a table of MYDB2 on SERVER2. How can i do this?
View 5 Replies View RelatedI have an excel sheet that contain colummns as in a table in a sql database i want to transfer this data from the sheet to the table frombusiness logic code layer not from the enterprise manager by wizardwhat can i do?? ...please urgent
View 1 Replies View RelatedI am newbie to MDS of SQL,want to know how we can transfer tables from two different SQL Databases to MDS.Suggest me the steps to proceed with any examples.
View 2 Replies View RelatedI need to transfer data from one table to another.I will be using the SQL Query Analyzer to do this.This is not a simple transfer of data to the same structured tables.These tables are completely different, for the most part.For instance, I will be selecting certain fields of one table.....SELECT fldOne, fldTwo FROM someTableI need to take this information, one row at a time and input it into a different type table.So, something like this to insert into the other table...INSERT INTO otherTable( fld1, fld2) VALUES( value1, value2 )I've looked around for a sample to achieve this, but may have overlooked it?Anyone have a link to show this or a quick sample?Thanks all,Zath
for bcp in,
1. use fixed length format file or delimitered file?
2. table w/o index including primary key?
3. sort the text file before bcp in (will it speed up indexes creation after data uploading?)
which pt will or will not improve the overall bcp in processing?
thx...
Hello,
Just requesting for help about transferring data from one table to another.
For example:
In Table1, there are 3 columns:
Col1 Col2 Col3
T1C1R1 T1C2R1 T1C3R1
T1C1R2 T1C2R2 T1C3R2
T1C1R3 T1C2R3 T1C3R3
T1C1R4 T1C2R4 T1C3R4
In the target Table2, Col1 should be a string constant,e.g. "A" and Col2 from Col1 of T1 and Col3 from Col2 of T1:
Col1 Col2 Col3
A T1C1R1 T1C2R1
A T1C1R2 T1C2R2
A T1C1R3 T1C2R3
A T1C1R4 T1C2R4
I found something like
"INSERT INTO TABLE2 (COL1, COL2, COL3) SELECT COL1, COL4, COL7 FROM TABLE1"
but this code requires colomn one of the table 1 be selected as well but the column one of the
target table 2 requires a constant string.
I also tried this but doesn't seem to work:
Code Block
dtTable1 = ds.Tables(0) ' Table1
bSQL.Length = 0
For Each dr In dtTable1.Rows
bSQL.Append("INSERT INTO Table2(Col1, Col2, Col3) ")
bSQL.Append(" VALUES(")
bSQL.Append("'" & "A" & "',") ' Constant for column 1 of Table2
bSQL.Append("'" & dr(0).ToString() & "',") ' All data in the first column of Table1
bSQL.Append("'" & dr(1).ToString() & "')") ' All data in the second column of Table1
.......
.......
Next
.....
.....
Thanks,
K
Guys
i have two database on my sql server,, and i m trying to create a report in whch both database need to share their data.. @ the moment what i did, i simply create a view on one database to access the table of other database.. but is anyone has a better idea how can i transfer data from one database to another database... i think if i do with creating temp table that might resolve this problem.. but when it comes on another server of another database , how can i will do this ...
please give me any idea if u got my point .
Thanks and looking forward.
Is there a way to transfer ntext data from one table to another?I tried thisUPDATE [projects]SET [description] = (SELECT [description_ntext] FROM [table] WHERE[id]=1)WHERE [id_project] = 1;and thisDECLARE @DESCRIPTION ntextSET @DESCRIPTION = (SELECT [bids].[bid_conditions] FROM [bids],[projects] WHERE [bid_accepted_id] = [bids].[id_bid] AND [id_project] =@ID_PROJECT);UPDATE [projects]SET [description] = @DESCRIPTIONWHERE [id_project] = 1;none of those work in MSSQL2K,error reported is "The text, ntext, and image data types are invalidfor local variables."
View 2 Replies View RelatedHello. I want to ask about the possibility of copying both a tablestructure and it's contents from aSQL server table to a table within MS access. The problem cannot besolve with a permanent table structure at the target location.The names of the columns are essentially data with the application andso are subject to change. I am targeting a solution using SQL QueryManager.The approach I have tried (with failure) isSELECT *INTO <linkedserver table>FROM <local table>This should create and copy. However, I am not sure if this isachievable with this approach.Refer to the dialogue;-------------------------------------------------------USE MASTERGOEXEC sp_addlinkedserver@SERVER = 'Freddie',@PROVIDER = 'Microsoft.Jet.OLEDB.4.0',@SRVPRODUCT = 'OLE DB Provider for Jet',@DATASRC = 'C: empHMIS_Recipe.mdb'-- I am not sure if this is requiredEXEC sp_addlinkedsrvlogin 'Freddie', false, 'sa', 'Admin', NULLSELECT * FROM Freddie...FRED -- This is OKSELECT * INTO #Temp FROM Freddie...FRED -- This is OK-- This fails - Refer errorSELECT * INTO Freddie.FRED65from #tempServer: Msg 2760, Level 16, State 1, Line 1Specified owner name 'Freddie' either does not exist or you do not havepermission to use it.-- This also fails and I thought reflected the above select with naming- Refer errorSELECT * INTO Freddie...FRED65from #tempServer: Msg 117, Level 15, State 1, Line 2The object name 'Freddie...' contains more than the maximum number ofprefixes. The maximum is 2.EXEC sp_dropserver 'Freddie',@droplogins = 'droplogins'------------------------------------------------------------Thank you.Regards JC...
View 3 Replies View RelatedHello:
I am running on mssql 6.5, sp4. We have been trying to use EM transfer manager to move one test database on one server to another database on another server.
We are dealing with 135 tables on this database. The transfer works up until about the 80th atble and then just dies but the scheduled task says it failed and check error log. The transfer creates the tables on the destination database but only loads the data until this one table.
WE use all of the options in EM Transfer manager which are st as defaults.
THere is no one on the source or destination databases locking this table.
Other smaller databases were successfully transferred from one database on one server to the other database on the other server without any problems today and yesterday.
Has any one run across something like this?
THanks.
David Spaisman
Hi All,
can anybody help me in creating the SSIS package to transfer the data from SQL table in database engine to OLAP cube in Analysis services
Thanks in Advance.
Archana
I've a SSIS 2008 parent/child package solution to manage data transfers between two different data sources, so we can copy multiple tables and capture how many rows were transferred and duration for each transfer. This solution was working fine up until last week, when I made some changes to allow the package to perform a source count using standard SQL determined by an expression, or SQL provided from configuration tables, I also changed the package to Truncate or not the destination table, again controlled by configuration settings in a table. The child packages which perform the data flows have not changed!
The day after the controlling package promotion to live, I saw the bizarre behaviour of the Package log stating all rows transferred, but the actual table counts were not what the log stated, see attached file. The package solution works ok on other servers and was ok in DEV, but there were less tables and rows transferred.Re-running the package gave the same errors, but on some of the same tables and some different ones.
As it is the child packages doing the transfers and nothing has changed in them. I cannot see how the log would be able to say all rows are transferred and yet not all of the rows are actually moved?
Process output - where you can see counts and log Table transfer controller (as txt not dtsx)
An example of the data transfer child packages (as txt not dtsx)When I set the ExecuteOutOfProcess = True the package worked fine, unfortunately, this is not a good solution as SSIS 2008 does not tidy up the Dtshost.exe processes it starts and I'd be left with a memory issue after a very short time, we transfer hundreds of tables each day. ( I could write a .net script in the controlling package to kill the child processes, but that would still have hundreds of processes running before I could end them, as we have three parallel streams to allow a bit better performance.
I'm trying to insert data into a table from two tables into a single table along with a hard coded value.
insert into TABLE1
(THING,PERSONORGROUP,ACCESSRIGHTS)
VALUES
((select SYSTEM_ID from TABLE2 where
AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID
=('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID
=('USER2')),255)
I get the following-
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
Do I need to use a cursor?
Transfer tables from one server to the other on a regular basis. I'm doin this using the DTS import wizard (saved it as a package and scheduled a job). But i noticed that if the table structure changes on the soruce tables, the DTS package will fail.
I want to make a DTS package that imports 6 tables, now how do i make it such that if the structure of the tables changes it shud still work. ie, everytime the tables are tranferred, the old tables on the target server must be dropped and re-created with the source server table definition. I hope this is doable.
Plz help if ne one has done this b4.
Thx
Hi!
I have 2 tables (both have the same structure):
ID -> bigint (identity, not for replication, primary key)
Url -> nvarchar(1000)
MainUrl -> nvarchar(1000)
Tbl1 cantains about 0,5 mln records, and tbl2 - 1 mln.
What I need, is to copy records from tbl2 to tbl1. But records in tbl1 are unique, and it can't change. (Unique must be only "Url"; (and ID, but it's automatic)). How can I do this in fast way? Now I'm using SELECT for each record in tbl2 to see if it exist in tbl1. But it's a bit slow... Is there any faster method? (One thing: I'm beginner in databeses, so I'm wrote VB application to transfer records. How can I do it using only Microsoft Sql server?)
--------------
I'm forgot to write, I'm using MsSql 2005.
In the full recovery model, if i run a transaction that inserts 10MB of data into a table, then 10 MB of data is moved in the data file. Does this mean then that the log file will grow by exactly 10MB as well?
I understand that all transactions are logged to the log file to enable rollback and point in time recovery, but what is actually physically stored in the log file for this transactions record? Is it the text of the command from the transaction or the actual physical data from that transaction?
I ask because say if I have two drives, one with 5MB/s write speed for the log file and one with 10MB/s write speed for the data file, if I start trying to insert 10 MB of data per second into the table, am I going to be limited to 5MB/s by the log file drive, or is SQL server not going to try and log all 10 MB each second to the log file?
Hi, I'm working on Sql Server 2005 Express and I'm trying to transfer over some of my tables with the primary and foreign keys relations as well as the data in them from one asp.net 2.0 website to another.But I can't seem to find the Import/Export option in Sql Server 2005 Express Edition, does anyone know how I can do this?Thanks in advanced.
View 1 Replies View RelatedHello:
I need to develop an off-line database that replicates/copies some key tables for reporting. The info is fairly static (codes. etc.)and does not need to be real-time.
Is it feasible that I can set up a scheduled task on SQL 6.5 using Transfer Manager to copy & append data to this off-line db on a schedule.
I may not be able to set-up replication on our production server.
So, I am considering alternatives. Appreciate any input. Thank you :)
I have a table in mssql7 that has 7000000 record and I want to take100000 records out of it and place them into the new machine withmssql2000. The new machine will also have the same table name, so Iwant to append the 100000 records into that table.Thanks,Royal344--Direct access to this group with http://web2news.comhttp://web2news.com/?comp.databases.ms-sqlserver
View 1 Replies View RelatedHow is it possible to set data to flow through development,test,and production environment???????
I have created one package.Right now i am transferring data to tables in the development environment.
I want to use the same package for several diffrent distinations two based on environment.
Is there a way that the destination componnent sets itself automatically by passing destination tables through registry or is there anything i could or do i need to change manually everytime which ever i want to..
Hi all,
Currently, my (small) intranet site is storing it's data on a remote SQL server. The danger with this, as has happened several times now, is that the application is twice as vulnerable; if either the webserver or the dataserver malfunctions or is unreachable, the application won't work.
I only recently discovered the possibility to use local database files (MDF files), and this seems like a much better solution for my site. But now I want to transfer the tables that are residing on the dataserver, to the MDF file. The database only contains tables. How do I handle this? I do not have access to the dataserver, only to a few databases that are residing on it. Is this possible using Visual Studio 2008? I have read about a "Bulk Copy Program" (bcp) which is included with SQL Server, but I cannot find a download for just that application.
Or is this totally not the way to go? I've discovered MDF files are a bit more problematic with concurrent connections; having tables open in Visual Studio results in "Site offline" or "Cannot open database" error messages on the website. Problems I've never had to deal with using SQL Server, but they are only minor problems.
Thanks,
Peter
Hi,
I am new to SQL Server 2005 SSIS Packages. I want to transfer data from multiple tables from sql server to oracle database. I cannot use export wizard as it creates new tables in the destination (oracle) DB. I already have tables created in the destination DB. When I created an SSIS package, it allowed me create package to tranfer data for only for one table from source to destination. I have created DTS packages in 2000, where you have source db and destination db and just add links for multiple tables. Is there a way I can do it in SSIS. Please let me know.
I have few issues regarding the transfer of the tables from one file group to another file group in SQL 2008 and also How can we backup and restore the particular database based on file group level.
Let’s say I have a tables stored within the different FG. such as
Tables
File group Dimension tables Primary Fact tables
FG1 ...
FG2…
zzz_tables DEFAULT_FG
dim.table1 DEFAULT_FG
dim.table2 DEFAULT_FG
… ….
Here all I want to transfer the dim.table1 ,dim.table2 from DEFAULT_FG to the Primary File group .So is there simple methods for transfer the dim.table1,2 from one FG to another .I have tried somewhat but I couldn’t get the exact way.Secondly after moving those dim.table1 ,dim.table2 from DEFAULT_FG to Primary ,All I want to backup and restore the database only containing the Primary and FG1,FG2… not a DEFAULT_FG.Is it possible or not.?