Data Type Conversion In Stored Procedure

Aug 2, 2006

Hi,

I have a stored procedure a portion of which looks like this:


IF (CAST (@intMyDate AS datetime)) IN (
SELECT DISTINCT SHOW_END_DATE
FROM PayPerView PP
WHERE PP_Pay_Indicator = 'N' )
BEGIN
--ToDo Here
END


where:
@intMyDate is of type int and is of the form 19991013
SHOW_END_DATE is of type datetime and is of the form 13/10/1999

however when I run the procedure in sql query analyzer as:

EXEC sp_mystoredproc param1, param2

i get the error:


Server: Msg 242, Level 16, State 3, Procedure usp_Summary_Incap, Line 106
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.


what is the proper way of doing the conversion from int to datetime in stored procedure?

thank you!

cheers,
g11DB

View 11 Replies


ADVERTISEMENT

Index Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...

Jul 23, 2005

Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View 1 Replies View Related

System.Data.SqlClient.SqlException: The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Dec 14, 2005

After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.

System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.

Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.

At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.

anyone having this problem before?? hopefully you guys can help.

Thanks,

View 4 Replies View Related

Bulk Insert Task Failing On Data Type Conversion For A Destination Column Of Type Bit

Jul 6, 2006

I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.

I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.

I hope someone can help me work through this.

Thanks in advance,

SK



SSIS package "Package3.dtsx" starting.

Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".

Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".

Task failed: Bulk Insert Task 1

Task failed: Bulk Insert Task

Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

SSIS package "Package3.dtsx" finished: Failure.

View 5 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type!!

May 13, 2008

hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
 
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration

Partial Class Admin_emag_insert
Inherits System.Web.UI.Page

Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now

End Sub

Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub

Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String

'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text

ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString

'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"

'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()

AddMessage.Text = "A new emagazine was added successfully"

Me.VersionTextBox.Text = ""

End Sub
End Class
 

View 10 Replies View Related

Data Type Of Parameter Passing To A Stored Procedure

Feb 25, 2004

Hi,
I pass a paramter of text data type in sql server (which crosspnds Memo data type n Access) to a stored procedure but the problem is that I do not know the crossponding DataTypeEnum to Text data type in SQL Server.

The exact error message that occurs is:

ADODB.Parameters (0x800A0E7C)
Parameter object is improperly defined. Inconsistent or incomplete information was provided.

The error occurs in the following code line:
.parameters.Append cmd.CreateParameter ("@EMedical", advarwchar, adParamInput)

I need to know what to write instead of advarwchar?
Thanks in advance

View 1 Replies View Related

Converting Date Data Type In Stored Procedure

Jul 31, 2006

HI Experts...

I am using SQL SERVER 2005 standard edition

I have encountered a problem regarding converting date data type in stored procedure

As i was having problem taking date as input parameter in my stored procedure, so, then  I changed to varchar (16) i.e.

CREATE PROCEDURE sp_CalendarCreate
                                      @StDate VARCHAR(16) ,
                                      @EDate VARCHAR(16),

then I am converting varchar to date with following code

DECLARE @STARTDATE DATETIME
DECLARE @ENDDATE DATETIME

SELECT @STARTDATE = CAST(@STDATE AS DATETIME)
SELECT @ENDDATE = CAST(@EDATE AS DATETIME)

When I try to execute the procedure with following code

execute sp_CalendarCreate @stdate='12-1-06',@edate='20-1-06'

but it gives me following error

Msg 242, Level 16, State 3, Procedure sp_CalendarCreate, Line 45
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.

Can any one tell me the  solution of that problem (at ur earliest)

regards,

Anas

View 5 Replies View Related

Getting Error : : The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value

Jan 28, 2008

update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?

View 5 Replies View Related

Convert Data File Type From Unix To Pc Using Stored Procedure?

Jul 14, 2006

Hi, I have a script written in ASP to load data file (.csv) to ms sql. In the script, I have a portion of script looks like taht :
.....
Do While NOT oInFile.AtEndOfStream  oOutFile.WriteLine Replace(oInFile.Readline, chr(13), vbcrlf)Loop
.....
After that, I will use a BULK INSERT to input data to ms sql.
I am wondering how do I convert each row (data) to vbcrlf in Stored Procedure? Coz' I did not compose the convertion part, and I got no error when running BULK INSERT, but no rows are inserted :( HELP!!!!
I guess it's because the file is not being converted into a correct format??
 

View 1 Replies View Related

How To Deal With Image Data Type Within Stored Procedure When Using SQL2000?

Dec 5, 2007

Hi,
Does anyone know how to deal with image data type within stored procedure when using SQL2000?
I have a table and there is an image data type column. In this table I need to make a copy of one row within a table through a SP /it means to retrieve the whole row within SP,  change another columns data (but, that the image is not modified) / and save the modified row back to the same table.
Problem is, that within SP is not alowed to use local varaibles of image data type. Does anyone know a solution for this? Please.
Thank you.

View 1 Replies View Related

User Defined Data Type Used In Stored Procedure Parameters

Jul 23, 2005

I have several stored procedures with parameters that are defined withuser defined data types. The time it takes to run the procedures cantake 10 - 50 seconds depending on the procedure.If I change the parameter data types to the actual data type such asvarchar(10), etc., the stored procedure takes less that a second toreturn records. The user defined types are mostly varchar, but someothers such as int. They are all input type parameters.Any ideas on why the stored procedure would run much faster if notusing user defined types?Using SQL Server 2000.Thanks,DW

View 13 Replies View Related

Output Parameter With Text Data Type In Stored Procedure

Jul 20, 2005

How can I make a stored procedure which has a output parameter withtext data type? My procedure is:CREATE PROCEDURE try@outPrm text OutputASselect @outPrm =(select field1 from databaseName Wherefield2='12345')GOHere field1 is text data type.Thanks

View 1 Replies View Related

.NET Framework :: CLR Stored Procedure With Table Data Type Parameter

May 27, 2015

I want to create a CLR Stored Procedure with a Table User Defined Type like this short example in SQL:

CREATE TYPE [dbo].[TypeTable] AS TABLE
(
[Id] [integer] NOT NULL,
[Value] [sysname] NOT NULL,
PRIMARY KEY CLUSTERED

[Code] ....

I found some example in this link : CLR UDT

But I can't figure how to do the same with a User Defined Type Table.

View 5 Replies View Related

How Can I Change The Data Type Of The Parameter For The Deployed Stored Procedure ??

Jan 11, 2006

Hi
 
I have Try to Create Stored Procedure in C# with the following structure
 
[Microsoft.SqlServer.Server.SqlProcedure]
public static void sp_AddImage(Guid ImageID, string ImageFileName, byte[] Image)
{
       
}
 
But  when I try to deploy that SP to SQL Server Express  , The SP Parameters become in the following Stature
 
@ImageID uniqueidentifier
@ImageFileName nvarchar(4000)
@Image varbinary(8000)
 
But I don€™t want that Data types .. I want it to be in the following format
 
@ImageID uniqueidentifier
@ImageFileName nText
@Image Image
 
 
How Can I Control the data type for each parameter ??
Or
How Can I Change the data type of the parameter for the Deployed Stored Procedure ??
Or
How Can I defined the new Data type ??
 
Or
 
What's the solution to this problem ??
 
Note : I get Error when I try to use Alert Statement to change the parameter Data type for the SP
 
ALTER PROCEDURE [dbo].[sp_AddImage]
      @ImageID [uniqueidentifier],
      @ImageFileName nText,
      @Image Image
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [DatabaseAndImages].[StoredProcedures].[sp_AddImage]
GO
 
And thanks with my best regarding
Fraas

View 7 Replies View Related

Error Converting Data Type Varchar To Numeric In Stored Procedure

Aug 28, 2012

Here's the SP

Code:
USE [byrndb]
GO
/****** Object: StoredProcedure [dbo].[sp_GetLikeJobsByJobNumber] Script Date: 08/28/2012 15:17:28 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON

[Code] ....

Why when I run

Code:
USE [byrndb]
GO
DECLARE@return_value int
EXEC@return_value = [dbo].[sp_GetLikeJobsByJobNumber]
@number = N'23913'
SELECT'Return Value' = @return_value
GO

Am I getting an "Msg 8114, Level 16, State 5, Procedure sp_GetLikeJobsByJobNumber, Line 16

Error converting data type varchar to numeric." error? Line 16 is "@number varchar = null"

View 5 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Apr 19, 2008

Advance thanks ....... My table is  TimeSheet:-----------------------------------  CREATE TABLE [dbo].[TimeSheet](    [autoid] [int] IDENTITY(1,1) NOT NULL,    [UserId] [int] NOT NULL,    [starttime] [datetime] NOT NULL,    [endtime] [datetime] NOT NULL,    [summary] [nvarchar](50) NOT NULL,    [description] [nvarchar](50) NULL,    [dtOfEntry] [datetime] NOT NULL,    [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution  

View 5 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Aug 3, 2005

Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards

View 6 Replies View Related

The Conversion Of Char Data Type To Smalldatetime Data Type Resulted In An Out-of-range Smalldatetime Value

Mar 30, 2007

I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.



I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.

The code I'm using is:



Dim sqlcommand As New SqlCommand _

("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)



Try

conn.Open()

sqlcommand.ExecuteNonQuery()

conn.Close()

Catch ex As Exception

MessageBox.Show(ex.Message)

End Try



This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.



The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.

Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?













View 1 Replies View Related

Input Parameter Exceeds The Limit Of The Data Type's Length In Stored Procedure

Sep 4, 2007



Hi guys, is there any way to solve my problem as title ? Assuming my stored proc is written as below :

CREATE PROC TEST
@A VARCHAR(8000) = '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,...,5000'

AS
BEGIN

DECLARE @B nvarchar(MAX);
SET @B = 'SELECT * FROM C WHERE ID IN ( ' + @A + ')'

EXECUTE sp_executesql @B
END
GO

View 2 Replies View Related

Creating A Stored Procedure That Will Summarize Data In A Table Into A Table Reflecting Period Data Using An Array Type Field

Sep 20, 2007

I am attempting to create a stored procedure that will launch at report runtime to summarize data in a table into a table that will reflect period data using an array type field. I know how to execute one line but I am not sure how to run the script so that it not only summarizes the data below but also creates and drops the table.

Any help would be greatly appreciated.

Current Table

Project | Task | Category | Fiscal Year | Fiscal Month | Total Hours
---------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 2007 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2007 | 02 | 20
Proj 1 | Task 1 | Cat 3 | 2007 | 03 | 35
Proj 1 | Task 1 | Cat 1 | 2008 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2008 | 02 | 40
Proj 1 | Task 1 | Cat 3 | 2008 | 03 | 40

Proposed Table

Project | Task | Category | Fiscal Month 01 | Fiscal Month 02 | Fiscal Month 03 | Fiscal Year
---------------------------------------------------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2007
Proj 1 | Task 1 | Cat 2 | 0 | 20 | 0 | 2007Proj 1 | Task 1 | Cat 3 | 0 | 0 | 35 | 2007
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2008

Proj 1 | Task 1 | Cat 2 | 0 | 40 | 0 | 2008
Proj 1 | Task 1 | Cat 3 | 0 | 0 | 40 | 2008

Thanks,
Mike Misera

View 6 Replies View Related

Help With Data Type Conversion !!!

May 9, 2008

Hi all,

I have 2 conversion related to same table.

a) Date:
I have a table called Table1. It has a field called HDate(nvarchar type). The records are like this;
HDate
H01042008
H01082008
H01102006
H01112008

Each records always start with an H charatcter, the remaining characters always represents date in the format of DDMMYYY.
I want to convert this format into the date format of YYYYMMDD. So once coverted, the record should be as follows;
HDateConverted
2008-04-01
2008-08-01
2006-10-01
2008-11-01

b) In the same table I have another field called NoID of nvarchar type. The records are like this;
NoID
00.
000
001
002
003
004
005
006
007
008
010

I want to convert it to Integer. Once converted the records for above example should be like this;
NoIDConverted
0
0
1
2
3
4
5
6
7
8
10

How can I solve both these conversions?..
Thanks a million for your qucik help.

Zee

View 10 Replies View Related

Conversion Of Int Data Type Error?!

Nov 6, 2007

 Hi,I keep getting the error:System.Data.SqlClient.SqlException: Conversion failed when converting the varchar value '@qty' to data type int. When I initiate the insert and update.I tried adding a: Convert.ToInt32(TextBox1.Text), but it didn't work.. Could someone help?My code:private bool ExecuteUpdate(int quantity){  SqlConnection con = new SqlConnection();  con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True";  con.Open();  SqlCommand command = new SqlCommand();  command.Connection = con;  TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1");  Label labname = (Label)FormView1.FindControl("Label3");  Label labid = (Label)FormView1.FindControl("Label13");  command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - '@qty' WHERE productID=@productID";  command.Parameters.Add("@qty", TextBox1.Text);  command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery();  con.Close();  return true;}    private bool ExecuteInsert(String quantity)    {        SqlConnection con = new SqlConnection();        con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True";        con.Open();        SqlCommand command = new SqlCommand();        command.Connection = con;        TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1");        Label labname = (Label)FormView1.FindControl("Label3");        Label labid = (Label)FormView1.FindControl("Label13");        command.CommandText = "INSERT INTO Transactions (Usersname,Itemid,itemname,Date,Qty) VALUES (@User,@productID,@Itemsname,@date,@qty)";         command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name);        command.Parameters.Add("@Itemsname", labname.Text);        command.Parameters.Add("@productID", labid.Text);        command.Parameters.Add("@qty", Convert.ToInt32(TextBox1.Text));        command.Parameters.Add("@date", DateTime.Now.ToString());        command.ExecuteNonQuery();        con.Close();        return true;    }protected void Button2_Click(object sender, EventArgs e){  TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox;  ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e)    {        if (e.CommandName == "Update")        {            TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox;            ExecuteInsert(TextBox1.Text);        }    }  Thanks so much if someone can!Jon 

View 33 Replies View Related

Data Type Conversion Problems Using DTS

Mar 13, 2001

I am trying to execute a custom DTS package i made using VB. The SQL datatypes that I am using are short, VarChar and Single in SQL. Would anybody happen to know the equivalent data types in MSAccess 97?

View 1 Replies View Related

Data Type Conversion Issue

May 27, 2008

Im running the following join on derived/real tables. I get 18 rows when I run query1 mentioned below & I get 122 rows in query 2.
Column, id is nvarchar & column membernumber is INT. Im converting nvarchar to INT ...but it is still not fetching desired results..

Thanks
Anil Kumar.

Query1--

select isnull(ea.id,0) , coalesce(sum(ea.earn),0) ,
coalesce(B.membernumber,0) , coalesce(B.RecruitingBonus,0)
from [hqvm03hqsqlinst05].sdk.dbo.DecBonusPaidSPBN Ea
left outer join
(select A.Membernumber, A.RecruitingBonus from
(select bb.beenumber as MemberNumber, sum(pc.RecruitingBonusMTD) as RecruitingBonus
from beebusiness bb
join probucketamount pc on pc.beebusinessguid = bb.beebusinessguid
join beeentity be on be.beeentityguid = bb.beeentityguid
where pc.RecruitingBonusMTD != 0 group by bb.beenumber)A)B
--
on B.Membernumber = ea.id
--
where ea.earn != 0 or b.RecruitingBonus != 0
group by isnull(ea.id,0), coalesce(B.membernumber,0), coalesce(B.RecruitingBonus,0)


Query 2--

select isnull(ea.id,0) , coalesce(sum(ea.earn),0) ,
coalesce(B.membernumber,0) , coalesce(B.RecruitingBonus,0)
from [hqvm03hqsqlinst05].sdk.dbo.DecBonusPaidSPBN Ea
left outer join
(select A.Membernumber, A.RecruitingBonus from
(select bb.beenumber as MemberNumber, sum(pc.RecruitingBonusMTD) as RecruitingBonus
from beebusiness bb
join probucketamount pc on pc.beebusinessguid = bb.beebusinessguid
join beeentity be on be.beeentityguid = bb.beeentityguid
where pc.RecruitingBonusMTD != 0 group by bb.beenumber)A)B
--
on B.Membernumber = convert(int, ea.id)
--
where ea.earn != 0 or b.RecruitingBonus != 0
group by isnull(ea.id,0), coalesce(B.membernumber,0), coalesce(B.RecruitingBonus,0)

View 4 Replies View Related

Char Data Type Conversion

Sep 11, 2006

im trying to convert char (18) data type to decimal (18,6) but it wont let me do it. It gives an arithematic error. what would be other way to solve this problem. Can i do it with float if yes how so? or any other suggested way. Thanks

View 6 Replies View Related

Implicit Conversion Of Data Type

Oct 3, 2006

Dear all,

Hi, I'm using this code to export record from sql to excel and i got this error message "Implicit conversion from data type text to nvarchar is not allowed. use the convert function to run this query"

Excel file is already created columns in the view and excel file are the same and cell format of the excel is converted to text.

--- code used
insert into OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=c:filename.xls;',
'SELECT * FROM [filename$]') select * from ViewName

thanks,

View 6 Replies View Related

Data Type Conversion Problem

Oct 28, 2006

I am not sure if this is the right place to post, although I am new to SQL Server.

I upsized a database from MS Access to SQL Server 2005 on my local machine. I am trying to change the primary key from int to uniqueidentifier, but I get this error: "conversion from int to uniqueidentifier is not supported on the connected database server". I have tried googling around to see if anyone has posted an answer, but haven't found a solution. I have also tried detaching the database, but that doesn't help either.

Can someone help me understand what the error is meaning by "connected database server", and how I can make it possible to change the data type?

Thank you.

Ben

View 5 Replies View Related

Data Type Conversion Issue

Oct 3, 2006

Hi guys
I exported some data from a text file to sql server. Here is the sample data..



This table has about 2 million rows.There is a date field in the table which comes as a 'nvarchar' in sql .When i try to convert it to a 'datetime' , i get an error as operation timed out..



Here is the data from the text file...

Date dispensed Outliers Formulation ID Provider Number (dispensing) NSS flag Patient category Units dispensed Total days supply
1/01/2006 12:00:00 a.m. normal 106509.00 7952 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 8208 I A 360.00 90.00
1/01/2006 12:00:00 a.m. normal 106509.00 9460 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 10184 I A 120.00 60.00
1/01/2006 12:00:00 a.m. normal 106509.00 10291 I A 120.00 60.00
1/01/2006 12:00:00 a.m. normal 106509.00 11149 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 11294 I A 120.00 60.00
1/01/2006 12:00:00 a.m. normal 106509.00 11777 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 12048 I A 120.00 30.00



I have tried the bulk insert as well.

Here is the script for the create table ..



USE [Library]

GO

/****** Object: Table [dbo].[tablename] Script Date: 10/03/2006 14:45:59 ******/

SET ANSI_NULLS ON

GO

SET QUOTED_IDENTIFIER ON

GO

CREATE TABLE [dbo].[NormalOutlier1](

[Datedispensed] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,

[Outliers] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,

[Formulation ID] [float] NULL,

[Provider Number (dispensing)] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,

[NSS flag] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,

[Patient category] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,

[Units dispensed] [float] NULL,

[Total days supply] [float] NULL

) ON [PRIMARY]







Hope this helps

View 8 Replies View Related

T-sql Data Type Conversion Error Handling

Jun 21, 2001

I'm trying to convert a column from a varchar(14) to float, some of the rows contain some non-numeric characters. I've tried to write a cursor to step through the records, run cast(col1 as float) on each record, then use if @@error <> 0 to capture an error but it doesn't work. It steps through fine but when the cast command fails it ends the execution of the script with "Error converting data type varchar to float."

How can i capture this error without having the script fail? Is there another way to get this done?

Thanks,

Jim

View 1 Replies View Related

Data Type Conversion - Numeric To Char

Jul 12, 2000

I would like to know how to translate a numeric value = 3 to a text or char value = 03.

Any input would be appreciated.

Thanks,


Joel

View 1 Replies View Related

Date Data Type-Conversion Error.

Jun 22, 2006

Dear friends,

I am struggling to insert a date value in "dd-mm-yyyy" format to SQL server table having datatype as Date/Time.

Regional date setting for Server and Local systems are in dd-mm-yyyy format.


I am using following code

Dim DT As String
DT = Now()
DT = Format(DT, "MM/DD/YYYY")

for the inserting into table using command

ins_comm.CommandText = " INSERT INTO CARD (doe) values("& DT &")"

Procedure will end without any error ,but stored value for the date feild will be garbage value like 1900-01-01.

But if i used mm-dd-yyyy format ,it will get inserted.

What could be the reason,How I can save value in dd-mm-yyyy or dd-mm-yy format

Please help!!!


Graceson Mathew

View 1 Replies View Related

Conversion Failed Because The Data Value Overflowed The Specified Type

Apr 29, 2008

Hi All,

I am facing very weird issue...

When i am running package thru SQL server job and getting follwing error:

SIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
There was an error with input column "Billing_date" (2568) on input "OLE DB Destination Input" (979). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (979)" failed because error code 0xC020907A occurred, and the error row disposition on "input "OLE DB Destination Input" (979)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "billing_table" (966) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029.

In the package, i am selecting data from SQL Server database into query(billing_table) and inserting data using destination task into SQL server table(stg_billing_table). Both table has same data type datetime for Billing_date.

Here are couple of points:

1) When i am trying to execute same insert statement thru SQL Server editor, it is running successfully.

INSERT INTO stg_billing_table (Billing_date)
SELECT Billing_date FROM stg_billing_table;

2) When I am running package from Solution explorer then also it works fine.

Issue only comes when i try to run package thru SQL server job. one point, There are lot of other task running parallel to this package when we run thru JOB.

One more thing which i have observed that when i tried to see input transformation datatype for same column in package, it is DT_DATABASETIMESTAMP. Well i am not able to understand that it may be potential issue because if it is related to DT_DATABASETIMESTAMP to date time conversion then we should have faced this issue while running thru solution IDE.

Issue looks related to database level buffer/ Memory overflow etc. to me. Can somebody help me understanding the issue?

Thanks.

View 8 Replies View Related

Data Type Conversion .. Varchar To GUID

Jul 31, 2006

Hi,

I have a parameter @name varchar(50)

but the table has a field with datatype GUID

how I can convert varchar to guid before insertion...

Thanks

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved