Hi all ,
What datatype should I take to store time in a table -- datetime , float or decimal?
my requirement is to store "Worked Hours in a day by an employee" in the field say, 9 hrs and 30 mins.
I should be able to manipulate data in this field such as total hours present in the month, extra hours worked in a day (considering 9 hrs as standard time),less hours worked in a day, and so on
Hi,Is it possible for me to store 000 or 01 or 001 in an Integer data type in SQL Server without it dropping the leading zeros?
Thanks
Hi
when I store html file with image in image data type of database sqlserver, where will actual data store (content of html file, and file image which display on html file), in which folder
Can I help you
I have xml string that needs to be stored in a field in the DB. I was looking for recommendations for the data type I can use in such a scenario.
View 1 Replies View Relatedhello,
I want to store the photo in the sql server 2005 , what datatype should I use?
Hi anyone,
View 3 Replies View RelatedHello friends
what is the right datatype to store the hours and minutes part in the database?
i found some info which says we have to convert the duration(hrs and min) into minutes and then store
is it the right approach?
Regards
Sara
security ids seem to be made up of at least 3 32 bit unsigned numbers and a few smaller numbers. We believe their lengths vary. We dont mind dropping the "S" from the front. What data type do you recommend be used for their storage? We expect only limited joins and user visibility on this column. We may wish to create an index on this column. We think varchar and varbinary are the two major choices.
I have a C# app linked to a SQL db and I need to store it's version number in a table (could be something like 1.2.789) but I cannot find any datatype which allows me to do this.
I could create three fields in the table for each number but I don't want to.
hi my friends;i have got a problem.i thing you can help mea='x80x02}qx00(Kx02Kx03Kx04Kx06Kx05Kx07u. 'i want to store database but i don't know which encoding and dataytpepls help mesorry for my bed english...thanks all
View 3 Replies View RelatedI was working on figuring out where a certain application wasstoring the multiple selection choices I was doing through the app.I finally figured out that they were being store in an IMAGEdata type colum with the variable length of 26 bytes.This is the first time I ran into such way of storing multipleselections in a single Image data type.Is this a better alternative than to store into a One-to-Manytables? If so then I'll have to consider using the Image datatype approach next time I have to do something like storing1 to thousands of selections.Thank you
View 4 Replies View RelatedI'm using the XML Source to process a hierarchical set of XML. As such, the XML Source creates keys to maintain the hierarchy. This is very convenient, and keeps me from having to invent my own keys.
The problem is that the datatype of these keys defaults to DT_UI8. Which SQL Server 2005 datatype should I use to store these values in my staging tables? BIGINT corresponds to DT_I8, which can't accept DT_UI8 values.
Right now i'm developing a time attendance system.
So in that case i'll be playing with time where that time represents what time an employee come to office and go home.
I'm a little bit confuse which data type i'll be used in this system.
Because there will be a lot of calculation according time data inside the database, such as: how many times an employee comes before 08.00, how much hours that he/she spend in the office that they, etc.
Can somebody help me with this problem, what data type most suitable with this kind of system and how can I do the calculation more easily?
thanx before,
Hi! I'va tried to find but I wasn't successful... I have a column in my database which I want it to be in minutes.seconds.cents of second... Is it possible to define this data type in sql server?
Thanks for any precious reply!
Hi, all experts,
Is there a way in SSIS dev environment that will let you convert/cast data type at desing time?
Under data flow mappings, there are so many things you can do, but why I did not find any easy way to convert?
I got this validation warning about not supportng converting type DT_STR to DT_I4, or something like that on many occassions..
I am using OLEDB Source as source and SQL Server Destination as destination.
Am I missing something obvious?
Thanks!
Hi, all,
Again I encountered a very strange problem which displayed the predicted attribute values as percentage format? The data type of the attribute is actually double, why is that?
That's really frustrated.
Thanks a lot in advance for your kind advices and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
In my database table has auto Identity file which is (1,1) But Its Increasing 1000 Some time 100 I don't Understand why It is happening in my every table.
View 4 Replies View RelatedAll source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014]
GO
IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL
DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
[code]....
Implement time interval type in the form of a user defined type in SS2k8r2? Specifically an interval type described in the book Temporal Data and the Relational Model by C. J. Date at all. As an example, an interval is below:
1/4/2006:1/10/2006
which would mean the time period from 1/4 to 1/10.
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedAfter testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
How do I change a store procedure type from 'User' to 'System'
View 5 Replies View RelatedHello,
in you mind, what is the best sql-type to store HTML text ?
thanks.
Hi,
I tried entering this value "8/24/2006 1:35:00.127 PM" with 127 as the milliseconds in a datetime field, but encountered error saying inconsistent datatype ...
Anyone knows how to store datetime value with milliseconds in the SQL database?
Thanks
Hi Experts,
I have an urgent needs.
I want to store null for decimal type to sql server. But I do not know how to do that. I get data from user input. If the user did not enter anything in the textbox, then I want to store null to sql server. I list a piece od code below. I got error in the last line fItemObject.ChargeAmount = null;.
if (!String.IsNullOrEmpty(txtDescription.Text)) myObject.LongDesc = txtLongDesc.Text; else myObject.LongDesc = null;
if (!String.IsNullOrEmpty(txtAmount.Text)) myObject.Amount = Convert.ToDecimal(txtChargeAmount.Text); else myObject.ChargeAmount = null;
// Then I submit the myobject to the sql server.
Thank you very much in adavance!
Hi - I'm using Session variables to store information (sort of webshop).
The sessions are a mix of the usual straightforward strings, wich are no problem - but I also have a DataTable which I store in a session variable, and I also have an array, which I store in a session variable eg. session("day")(x) where x is the item in the array.
I want to give my users the ability to store the items they've selected in my database, but have no idea of what type of field I should use for the datatable and array session variable. Should I use a TEXT field, or is there another more appropriate one'?
I'm using SQL Server 2000.
Thanks for any help,
Mark
What is the type of values I have to use to tell the database to store pics?
View 4 Replies View RelatedHi,
I was wondering if anyone knows how to convert an array of bytes to an SQL CE 3 image type and vice versa.
I am using the SDF Signature control and I would like to store the signature as an Image. It needs to be an image so it can be synced with a desktop access 2003 database.
Cheers
Simon
Is there any posibility to store only time and not date in sql server ? Even if there is no data type to support it, is there any round about way of doing it ?
Should I choose datetime in sql?
How can I display 01:25,125 on a website?
Hello,I need to store the start and end time of each weekly class into adatabase. so that people can easily search for classes based on time.for example, someone might want to search all classes that are offeredbetween 9am and 2pm.How can i implement this time field? i don't have a date to store withthe hour and minutes. is there and way sql server can tell 2pm isbigger than (>) 9am?thank you in advance,eddy
View 2 Replies View Related