Database Backup And Recover
Jul 14, 2003Hi all:
In order to test database restore, I create a backup driver and puporse delete one table, then I try to restore my databse use backup, but the delete table donot show up.
Thank you
ADVERTISEMENT
How Do I Recover Database From A Detached Backup Device?
Nov 29, 2007I ran into a problem today where I had to pull a backup file from an older tape. The file was originally is a backup that was stored in a device like :
EXEC sp_addumpdevice
'disk', --type
'c2000_BackupDevice', --logical name
'\UNCPathackupFile.bak' --physical location
I put the file from the tape on a File Server and then tried to create a new backup device pointing to the file. That's easy enough, but when I try to restore from it I get an device error saying it's offline.
How can I get that device attached to my server and then extract the backup files stored inside it?
Please advise b/c this is an interesting problem I hadn't anticipated and it argues that I should change my backup strategy .
Thanks for any advice/experience you can provide,
alex8675
Restore New Database And Recover Data From Backup
Jun 13, 2014I created a new database and want to recover data from a backup this script
use master
go
restore database new
from disk='D:
ew.bak'
go
but get an error
Message 3141, Level 16, State 0, Line 1
The database to be restored was named 'ats342'. Reissue the statement using the WITH REPLACE option to overwrite the 'new' database.
Message 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
Recover The Backup Set With MSDB
Apr 13, 2007I am facing the Database recovery problems sicne I have lost my MSDB db , only i have the Complete db backup and transactional backup.
How do i can recover the database since i don't have the MSDB database
Recover Just One Table From Backup
Sep 6, 2007I work on sql server 2000.
Is it possble to recover just one table from the database backup ???
I am new to this.
Please let me know.
thanks
DB-Corruption: Backup, Restore And Recover
Oct 2, 2001Hi
I have a question concerning backup / restore / recover of a MS-SQL-Server-Database.
Following configuration exists:
MS-SQL-Server running on NT
OS, Server located on a mirrored Raid 0 Disk -> C:
Transactionlog-Files (.ldf) on the same physical mirrored Disk -> E:
Database-Files (.mdf) located on a separate pyhisical Disk (Disk-Set, Raid 5) -> D:
I take a full backup every night of all databases, no Transaction-Log backup is made during a day (never)
Assuming following situation:
During a day one Database became corrupt. The physical-file (.ldf) of corrupted database is still accessible
on Drive E:
1. Step: I make a copy of the .ldf-File and put it on a secure place or in an other directory
2. Step: I restore the DB from the last full backup
3. Step: ???? How is it now possible to recover from the physical available .ldf-File? I know it should be
possible but I don't now how.
Has anybody tips or suggestion or has someone ever had a similar situation? Feedback would be appreciated.
Kind regards
Gabi
Data Warehouse Backup/recover
Jun 9, 2004Hello, everyone:
Does any body have the experience to execute data warehouse backup/recover? What I want to know is how to backup/recover database in data warehouse and cubes.
Thanks.
ZYT
Backup Failed In Loading Status. How To Restart Or Recover?
Jun 18, 2007I asked this question before but never received a decent answer. When a restore fails, what are the steps to re-start the restore? This should be a very common issue and for the life of me I have been unable to find it in BOL or the MS site! Please let me in on the secret!!
Thanks
The Backup Set Holds A Backup Of A Database Other Than Existing Database. Restore Database Is Terminating Abnormally
Apr 9, 2008
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
Recover Database
Feb 27, 2000How do I begin? I had previously installed the SQL Server 7.0 with NT Authentication and everything was fine until I Rename domain Name and Computer name. I decided to uninstall SQL Server, and then reinstall it.
From this action unable to see my database in enterprise manager. I Rename old domain and computer name again. and reinstall with Upgrade Version. but still same effect. Can anyone help? What do I need to do to get my database to work again? Any input on this will be appreciated. Thanks in advance.
How To Recover A Database?
Aug 25, 2004I had MS SQL installed on my comp.I had to reformat my hard drive due to some problems.There was a db in the sql server which i needed.So i saved the .mdf & .sdf files.Then i installed sql server in the formatted hard drive & pasted the .mdf & .ldf files in the Data forlder in MSSQL folder.But the problem is that even after doing this the enterprise manager doesnt show that database.Can anyone help me with this?Is there any way to recover the database?
Thanks a lot
P.S.- I also have whole of the earlier MSSQL folder present in the earlier program files backed up.Would that help in anyway.
Recover Database
Nov 23, 2004Hi
I've had a powerfailure, that resulted in I had to scratch my DB server, I've managed to get all the .mdf and .ldf files from the server. On the new server I get a "Error 823: I/O error (torn page)" when I'm trying to attach the .mdf file to the New server.
Both the new and the old server is a win2003 with SQL 2000 SP3
Is there anybody who knows how I can recover the DB?
/Rune
Recover Database Help!
Oct 6, 2005Hello,
Is it possible to restore a SQL 2000 database with data from a transaction log?
I am not sure what happened to my database, all the data in the tables is gone. I generated a db script to create a duplicate database. I saved the .sql file on my local machine, separate from the db server, renamed the database name in the .sql file to a new database. Tested script in query analyzer for syntax, all was fine. Running it at this point would have created a new database with a different name, right?
Now my original database is empty. Can someone please provide me with information on getting my data back. Is there a way of using the transaction log to recover the data.
Thanks
Way To Recover A Database?
May 9, 2011is there any way to recover a database? I accidently drop my database .I don't have any backup.
View 5 Replies View RelatedRecover Mirror Database From Snapshot Database
Feb 28, 2008I have a mirred database and have snapshot created from the mirroed database. I can do data selecting from the snapshot. But when the pricipal server is down , I can re-active the mirroed database.( I did succesfully upto this). Then I need to restore the database from snapshot and which failing with following error message.
Code Snippet
Msg 5123, Level 16, State 1, Line 3
CREATE FILE encountered operating system error 3(error not found) while attempting to open or create the physical file 'E:sql_datadevitst_mirrorlog st_mirror_log.ldf'.
Msg 5024, Level 16, State 2, Line 3
No entry found for the primary log file in sysfiles1. Could not rebuild the log.
Msg 5028, Level 16, State 2, Line 3
The system could not activate enough of the database to rebuild the log.
Msg 3013, Level 16, State 1, Line 3
RESTORE DATABASE is terminating abnormally.
Recover Database Password
Jul 23, 2007Hi all,
Is it possible to recover or find the password of database or resetting is the only option? I have a database that has a two users in the Users tab. How to find out the password for these?
Thanks,
Recover Sql Server Database
Feb 1, 2008Hi,
By mistake i've damaged my .mdf file and i have no backup on this database . However i have the transaction log intact and an older version of the database .
Is it possible to recover the database using the transaction log? How can it be done?
Thanks to anyone who can help me.
Ms Sql Server Database Recover
Jan 24, 2004I can recover all type of ms sql server database losing.please contact me at cn9526@163.net
View 2 Replies View RelatedRecover Deleted Database
Oct 5, 2007I have accidentally deleted a Database from SQL server 2005 instance. Is there any chance for me to recover the Database. If yes do let me know the method.
Thanks in advance
Mrinmoy
Can I Recover From The Database Files?
Jul 23, 2005Howdy all -I am *not* a DBA, so please bear with me. A client's Windows 2000server went belly up yesterday afternoon after getting updates fromWindows Update. Wouldn't come up at all any more. I broke the mirrorfor the OS, rebuilt the Windows 2000 installation, and installed MS-SQL2000 and SP3 so that now the server is configured identically to whatit was before the crash.Now I have the databases in D:Program FilesMicrosoft SQLServerMSSQLData. D: is a mirror of the (now broken) oldinstallation. How can I get the databases into the active installationof MS-SQL on the C: drive?I was thinking of creating databases with the same name, shutting downSQL and copying the files from D: to C: but that sounds too easy.Any pointers greatly appreciated. Please remember that I am not anexperienced DBA, so use short words and speak slowly... :-)
View 1 Replies View RelatedRecover Database File
Aug 24, 2006hi all,
i have SQL 2000 server with SP3, yesterday my database was suddenly goes to suspect mode. then i found log in sql server log. and it shows following text:
I/O error (bad page ID) detected during read at offset 0x00000000030000 in file 'C:Program FilesMicrosoft SQL ServerMSSQLDataMFS_Data.MDF'..
kindly, do needful for recover data from this file...
Tejas Kishanwala
How To Recover Database From LDF File
Oct 21, 2015I am working on SQL Server 2008 R2 and unfortunately I have lost my .mdf file after detaching it from my database, but the .ldf is still in my system. Is there a way to recover my database from .ldf file?
View 3 Replies View RelatedRecover Deleted Database On Sql Server
Feb 12, 2008hi
Can any body provide me any idea that how to recover database data if i have deleted that database
Bye......
Recover A Deleted SQL Express Database
Mar 22, 2006One of my SQL Express databases was deleted by mistake through MS SQL Server Management Studio Express. It is not in the Recycle Bin and I have tried to use a tool such a Active@ Undelete to recover the file but it cannot find the deleted file.
I have a backup file *.bak in the ....MSSQLBackup folder I made using MS SQL Server Management Studio Express. When I try to use the restore database feature in SSMSE I get various errors.
Any Suggestions on how to recover the deleted file or
Any suggestions or documentation on using the restore feature in SSMSE?
Any help at all?
Thanks
George
How To Recover Sql Server Database Data
Jun 20, 2007Hi all. A few days ago i installed mcafee total protection 2007 and that disabled my internet connection totally!! I couldn't fix it so i had to uninstall it. After uninstalling mcafee total protection 2007 still i couldn't join Internet!!
So i got mad and went and made repair installation of windows xp pro. After repair installation i couldn't activate it since Internet connection was still not working!! So i went and installed another copy of xp pro on different folder and named it WINDOWS (old one was WINDOWS2).Thanks god now i could join Internet but all my shortcuts and menu items are not visible.
Unfortunately I can't even start sql server 2000 either!! could any one tell me what should i do in order to get access to all database tables and data that i had in sql server and make a back up. I didn't install any new sql server yet. I be happy if an expert tell me what should i do. The installation folder of old windows(WINDOWS2) is still available along with sql server installation folder.Thank and looking forward for reply.
SQL 2012 :: Recover Database Without Log File?
Jul 10, 2015Recently i got task from Senior DBA, as : Recover a database without LOG file Currently Data File is available.
Log file is also available, but shows size as 0 KB. Means Log file is corrupted.
Currently existing DB is shown as Offline Mode in SSMS.
So i got below link:
[URL]
When i tried 1st/2nd solution from above link, i got below message:The log cannot be rebuilt because there were open transactions/users when the database was shutdown, no checkpoint occurred to the database, or the database was read-only. This error could occur if the transaction log file was manually deleted or lost due to a hardware or environment failure.
To try that 3rd solution, I had to DELETE/Remove existing DB from SSMS, so i can create New DB with same name.
When i tried to delete Log file from Command Prompt, using below command, Windows replied that File is corrupted, so it cannot be deleted.
DEL /F /Q /A C:Program FilesMicrosoft SQL ServerMSSQL11.SQLEXPRESS2012MSSQLDATAMyDB.ldf
Meanwhile my Senior DBA brought DB in Recovery Pending mode.
So if i want to go for 3rd solution,then i need to DELETE file, But Windows is not allowing me.
[URL]
How To Recover Deleted Database Data?
Oct 18, 2006I accidentally deleted some useful data in my database. I have both .LDF and .MDF files for this database.
Is there a way to recover this database to a point of time?
Thx.
Recover SQL Server V8 Database On 2005?
Jun 21, 2007I have managed to attach a database to my new instance of SQL Server 2005. The database orignally went into suspect mode on SQL Server v8.0. I have managed to get it into emergency mode but cannot see any tables. DBCC CHECKDB etc do not work. I get the error saying to upgrade the database to the newest version.
Any ideas? Thanks in advance!
Recover Image From SQL Server CE Database
Sep 14, 2007
Hello,
Im using the same DB used in northwindoledb example, i need a similar app but in C#, not C++, so i use this DB and make a form for Pocket PC 2003 SE Emulator in Vista (device application) with visual studio 2005, i use a function to recover the image and display in a PictureBox but when this image create a BitMap give me an error "Value does not fall within the expected range.", i seek a lot in internet and don't find a solution, the function is:
public static Image Bytes2Image(byte[] bytes)
{
if (bytes == null) return null;
MemoryStream ms = new MemoryStream(bytes,0,bytes.Length );
Bitmap bm = null;
ms.Read(bytes, 0, bytes.Length);
bm = new Bitmap(ms);
return bm;
}
If someone can help me i will appreciatte
BACKUP LOG Cannot Be Performed Because There Is No Current Database Backup. BACKUP LOG Is Terminating Abnormally.
Jan 31, 2008
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
Restore / Recover SQL Database From Data File
Feb 24, 2002Our SQL database log file got physically deleted. Now the database is in suspect mode. Is it possible to recover / restore the database just with the data file.
View 3 Replies View RelatedSQL 2000: How To Recover Database In SUSPECT State.
Jan 10, 2005Hi,
I've my database, testdb, ended up in Suspect state. The SQL log shows " I/O error 38(Reached the end of the file.) detected during read at offset xxxxxxxxxx in file '<path> estdb_Data.MDF'" during recovery. I do not have backup to restore the database from. So to run DBCC CHECKDB, I tried to put the database in emergency(bypass recovery) mode using
update sysdatabases set status = 32768 where name = 'testdb'
DBCC CHECKDB showed some allocation and consistency errors and suggested "repair_allow_data_loss" as minimum repair level.
Now to run
DBCC CHECKDB('testdb', repair_allow_data_loss)
I've to put database in SINGLE USER mode. For that I started SQL server by command
sqlservr.exe -c -m
Now when I try to run DBCC CHECKDB with repair option it says "Attempt to BEGIN TRANSACTION in database 'testdb' failed because database is in BYPASS RECOVERY mode."
So it seems I need to change the status of database such that it will allow me to repair it. If I try to reset the status, the database again goes in Suspect state and it seems DBCC commands don't run on database in Suspect state. Does anybody know how to recover the database in this state? Is there any other way to repair it?
Thanks in advance,
Yojana
SQL 2012 :: How To Recover Corrupted Database File (MDF / IDF)
Nov 28, 2014I run MSDE on a Windows XP Server and my database was marked as "suspect" by Enterprise Manager and its icon become gray. I detach that database and try to re-attach it but there is an error as the following:
Error 3624:
Location : page.cpp:2801
Expression: rowLength >= offset + deleteLenght
SPID : 56
Precess ID:1612
After that, I uninstall the MSDE and re-install new MSDE SP4 and try to re-attach the database file again and there is still an error. Is there anyway i can recover the data from that database?