while loading the transaction log dump on a 'STANDBY' database the connection got terminated. as a result the database was marked 'LOADING' and inaccesible. i would like to know if there is a way to get the db out of this mode without having to reapply a full database dump.
P.S. please ignore the previous two messages posted with the same subject line. i inadvertently pressed post twice. sorry for the spam.
Hi there,
I'm new to this forum but was wondering if you could advise me on getting the DB back to an accessible state. I tried restoring the DB but unfortunately I don't have enough disk space. The error message appeared instantly informing me of the lack of disk space. Now it says its in (Loading state) and I cannot access the DB. Is there anyway I can manually change it back??
The 2.0 version of ASPSTATE is slightly different than the 1.1 version in that one table has one additional column and another table uses a different data type and size for the key. The 2.0 version also has a couple additional stored procedures.
We'd like to manage just one session state database if possible so we're trying to figure out if Microsoft supports using the new schema for 1.1 session state access (it seems to work, but our testing has been very light).
Is there any official support line on this? If not, can anyone comment on whether or not you'd expect it to work and why?
Thanks.
Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
View 2 Replies View Related1. Is it possible and what would be the gotchas for taking a backup of a database in a 32 bit instance of sql server 2000 and loading it into a 64 bit instance of 2000? How about 2005 to 2005?
2. Is it possible to reverse that and go from a 64 bit to a 32 bit?
3. How about going from a 32 bit sql server 2000 into a 64 bit sql server 2005?
We're on the verge of upgrading a rather large database from sqlserver 2000 (32 bit) into 2005 (32 bit) but they anticipate eventually upgrading the hardware to 64 bit at least for production. The test node would remain at 32 bit.
Thanks for any help.
Hello,
I am using a SQL Database.
I want to know if there is a way to restore a database to an early state.
i made some changes on the entries and now the relations between tables are all messed up.
Need your help.
Thanks in advance.
I gave the command to restore database and in the middle of recovery i canceled it. now the database is showing 'loading'. I am not able to do any thing to it.please suggest how to make it operational.I also want the data
upto the time, I gave the command 'recover database'.
thanks.
Hi,
I have just restored one of my databases. Now, that database is no longer available to me. It has been marked as 'Database(Loading)'
I have reviewed and tried the suggestions given from previous posts of this same question, and they have not been successful (i.e. 'RESTORE DATABASE DPeople WITH RECOVERY' as well as re-restoring the database).
Any suggestions?
Jim
I have a database that is in (loading) status. Don't know why, we don't have a job running on it.
How to resolve this issue.
I have to load a 4 level XML file into Relational Database.
1. The input xml file contains a DTD definition reference. (Its an external file)
2. When tried using an XML source it prompts to set the prohibitdtd setting to false on xmlreader - How to do this.
3. I have primary keys (identity columns) - which are foreign keys in the next level and these primary keys can be generated only once I insert the record into the table. - What would be the best approach for this kind of Data transformations.
Hi,
I've my database, testdb, ended up in Suspect state. The SQL log shows " I/O error 38(Reached the end of the file.) detected during read at offset xxxxxxxxxx in file '<path> estdb_Data.MDF'" during recovery. I do not have backup to restore the database from. So to run DBCC CHECKDB, I tried to put the database in emergency(bypass recovery) mode using
update sysdatabases set status = 32768 where name = 'testdb'
DBCC CHECKDB showed some allocation and consistency errors and suggested "repair_allow_data_loss" as minimum repair level.
Now to run
DBCC CHECKDB('testdb', repair_allow_data_loss)
I've to put database in SINGLE USER mode. For that I started SQL server by command
sqlservr.exe -c -m
Now when I try to run DBCC CHECKDB with repair option it says "Attempt to BEGIN TRANSACTION in database 'testdb' failed because database is in BYPASS RECOVERY mode."
So it seems I need to change the status of database such that it will allow me to repair it. If I try to reset the status, the database again goes in Suspect state and it seems DBCC commands don't run on database in Suspect state. Does anybody know how to recover the database in this state? Is there any other way to repair it?
Thanks in advance,
Yojana
When performing a tail log backup to an online database through SSMS, the database is placed in restoring state. Is there a proper procedure to take the database out of restoring state after the backup is completed?
View 1 Replies View RelatedSQL server DB server is in hang state. Is this is due to high memory utilization?
View 9 Replies View RelatedHelo
i want to uplaod and doenload some image from database.
For uploading the image i am doing the folowing things. and it is working fine
i am using Input file of HTML shiiped with .NET and Image control of Asp.NEt
public void OnUpload(Object sender, EventArgs e){ // Create a byte[] from the input file int len = Upload.PostedFile.ContentLength; byte[] pic = new byte[len]; Upload.PostedFile.InputStream.Read (pic, 0, len); // Insert the image and comment into the database SqlConnection connection = new SqlConnection (@"server=NewSSA;database=iSense;uid=sa;pwd=pak"); try { connection.Open (); SqlCommand cmd = new SqlCommand ("insert into Image " + "(Picture, Comment) values (@pic, @text)", connection); cmd.Parameters.Add ("@pic", pic); cmd.Parameters.Add ("@text", Comment.Text); cmd.ExecuteNonQuery (); } finally { connection.Close (); }}
now my problem is i want to downlaod the uploaded image in to my image control
for help thanks in advance
sam
I canceled a restore job, and now the database is marked (Loading). When I go to propertied it tells me "database can't be opened, it's in a middle of a restore" Yet from a Query window I can connect and run queries against that database. Should I just wait until it finishes "Loading" or should I re-start the server?
Thanks
Hi,
I have a problem in restoring a Database. I have restored a database of size 25MB only onto a different database. This I have done through Query Analyzer not through Enterprise Manager. After restoration the database changed to Loading mode.
I thought it would take some time and change back to the normal mode. But in my case even after 24 hours database didnot change back to the normal mode. I am able to use database.
The following is the command executed through Query Analyzer,
RESTORE DATABASE Test
FROM disk ='c:mssql7ackuphrmdump.dat'
WITH REPLACE,
MOVE 'Test' TO 'c:mssql7datahrm.mdf',
MOVE 'Test_log' TO 'c:mssql7datahrm_log.ldf'
Can anyone help me please.
tks in advance,
Srinvasan Madhavan.
Greetings,
I am new at SQL and I have been asked to load some data into a database. I was given a file that has an extention .sql. shown below are the first few lines
quote:TRUNCATE TABLE henrylee.[HenryLee]
GO
INSERT INTO henrylee.[HenryLee] ( [custno], [company], [address1], [address2], [city], [state], [zip], [phone], [email] ) VALUES ( 'C00001', 'SUPREME NOVELTY', '5954 S PULASKI ROAD', '', 'CHICAGO', 'IL', '60629', '', '' )
several more rows after this
This looks to me like it was built to be scripted in or use some function of SQL to create and populate the table... does that make sense? Anyway, is there an easy way to insert this data into a table?
Thanks
-B
I have the file with binary data on my hard disk.
Also I have the table in the database with image field.
I want to load binary data from file to this field. Does any body know how can i do it?
I want to do it using only T-SQL, without any ะก# (etc.) coding - only sql script is properly.
I am contemplating storing session state data in a SQL server database (created by running the installSqlState.sql script included in the .NET framework installation) and have established a functioning connection to the database but I am constantly getting "access denied". I've found that tweeking the permission settings in SQL for the ASP.NET user is resolving each specific error that arises but was wondering if there is a more "global" resolution? I'm finding myself having to manually check off each individual object and every option or is this what is needed to resolve the "access denied" error?
Thank you.
While attempting to query a Full-Text enabled database where a catalog exists for the database, I receive the following error: "Full-text catalog %database% is in an unusable state. Drop and re-create this full-text catalog." I have dropped and re-created the full-text catalog numerous times with no luck. I have also stopped and restarted the SQL Server service and Full-Text service engines mulitple times with no luck. Other items to note are, we're running SQL 2005 64 bit Enterprise Edition SP1 on a Windows 2003 server. We have an identical setup in development and full-text indexing works without any hitches. I have also checked both the SQL server permissions and the local file-system permissions and they also seem to be more then adequate; in addition, they match the security configurations of our development environment. Lastly, the production database is a restore of the development database.
In short, I'm hoping that someone may have a potential solution other then reinstalling SQL Server...which may end up being the only solution.
Any help or ideas are greatly appreciated!
Hello, I am trying to mirror two databases and i receive the following error to the principal error log. "Error: 1443, Severity: 16, State: 2 ".
I HAVE:
1) SQL server 2005 enterprise SP2
2)ServerA And ServerB in the domain.
3)I have installed both ServerA and ServerB sql server with network system account and the services run both as NT AUTHORITYNETWORK SECURITY.
4) The principal database "Test" is on ServerA, i create a full backup and log backup and restore to ServerB the Full backup and the Log with NORECOVERY.So the database "Test" in ServerB is Restoring......
5)I Have created to both Servers Endpoint to Port 5022 with AUTHORIZATION=NT AUTHORITYNETWORK SECURITY.
6)The endpoint are both operational (I have tested through telnet command)....
7)I have added NT AUTHORITYNETWORK SECURITY user to both Security>logins and i gave full permittions sysadmin to the user.
8)I am executing the query "Alter database [TEST] set partner= N'TCP://xx.xx.xx.xx:5022'";
successfully from ServerB (Mirror) but from ServerA i receive that error!!!!
I believe it's network account security issue, but i cannot find a solution for that..... (I also tried to add DCServerA$ user to logins on ServerB AND DCServerB$ user to logins on ServerA cause previously i recaieved an login security error!!!)
I recently installed MSDE on a laptop. I then restored several databases from backup files without problem. However, one database is constantly stuck at the grey colour displaying the (Loading) message.
Why won't this database restore ? It is of course the most important database and I only have the one backup file.
This only appears to fail on his server. Do I need to uninstall MSDE and start over ?
Hi All:I need to make my database unavailable when i am loading the db. Thishappens daily and the db is not connected to any online app, to makethe app unavailable. It is queried thru an Access and hence availableall the time.The load happens daily for an hour in the morning.Is there anyway to make it inaccessible to users while loading dataand then make it accessibleThank youRS
View 1 Replies View Relatedwe config our SAP system to use SQL Server 2005 database mirror. but the mirror server hang by accident, after restart mirror server,the server return to normal,but the mirror can't be resume.
ALTER DATABASE R3P
SET PARTNER resume
the error is:
Msg 1447, Level 16, State 21, Line 1
ALTER DATABASE "R3P" command cannot be executed until both partner server instances are up, running, and connected. Start the partner and reissue the command.
Here's my delema, I have a file that's 308 bytes wide by 5.7 million records. The record length is fixed and the position and width of the known within the record. When I run DTS I recieve this error Msg MS DTS flat file provide and Err Diesdription: error creating file mapping view: not enough storage is available to process this command. Then when I try to continue with the wizard, it will not allow me to separate the data into the format that I need. Is there any other way to import this file using DTS?
View 1 Replies View RelatedIs there a way I can load a SQL2000 DB backup onto a SQL 7 server? Thanks.
View 1 Replies View RelatedI had to restore a database late this afternoon. I have the database set to FULL recovery. Database backups are performed nightly and transaction log backups are performed every other hour. I decided to perform a point-in-time restore. When I restored this way everything seems to go ok and it finishes. Then the database is grayed and says "Loading". Although I tried 4 separate times, one time allowing over an hour, the grayed out database and "Loading" never goes away.
Freaking out I deleted the "Loading" database (didn't delete logs and backup files) and tried a manual restore from the previous night's backup file. It attached and restored properly and was ready to go in 2 minutes.
Of course I wanted to get the transaction log files restored too, since it had work from earlier today. So I tried another restore via point-in-time and got the same old messages. Currently, the database is running with the previous night's backup restored but the users aren't too keen on having to do 5 hours worth of work to catch up to the previous transaction log backup come Monday morning.
Any suggestions?
Thanks,
JB
Hi ,I have a file presumably backup of a User database from a SQLServer(2k) database. I want to load/restore that in a local SQL Serverto be able to see the table , views , etc present in the database.How do I do that ?Thanks,Arijit
View 4 Replies View RelatedHi, there,
I have a Excel cross-tab (multilevel column) report that need to be loaded into a database table. Currently, I am using a Excel macro that convert the columns into rows before loading into the database table. I was thinking whether there is a better way of doing this perhaps in SSIS or using XML.
Any ideas greatly appeciated.
Thank you.
Yong Hwee
I wonder how do I shrink log file in a specific database which in Mirror/Synchronized/Restoring state..So that database is in Mirror server ( High availability ).
View 4 Replies View RelatedI Restored the database from Backup with a Different database Name. I got a message the Restore Database was successful. Still the database has Loading Status. Can you let me know what I have to take that status.
View 1 Replies View RelatedI can run this example from SQL Book Online from sql query analyzer. I can build the TestDB database.
BACKUP DATABASE Northwind
TO DISK = 'c:Northwind.bak'
RESTORE FILELISTONLY
FROM DISK = 'c:Northwind.bak'
RESTORE DATABASE TestDB
FROM DISK = 'c:Northwind.bak'
WITH MOVE 'Northwind' TO 'c: est estdb.mdf',
MOVE 'Northwind_log' TO 'c: est estdb.ldf'
GO
But... When I build stored procedure and call it through VB6. I've got the gray database symbol along with message TestDB (Loading/Suspecting)
Why I cannot run these commands through VB6
I am using SSIS to load raw files into database. In my files I have columns Date which has format
1/1/2010 12:00:00 PM.
I want to load this column in format 1/1/2010 24:00:00. I mean in 24 hour format.