Hi ,
I have set up my database to be using "Simple" mode. This will not log any
txns ?
I have got the err message saying the log file is full and i need to do a
txn log backup
i do not understand why , could anyone kindly advise ?
tks & rdgs
--
Message posted via SQLMonster.com
http://www.sqlmonster.com/Uwe/Forum...eneral/200510/1
My understanding is that the log file is not supposed to grow if the database is under simple recovery mode.I am in a situation where the log grows if do any inserts that involve millions of rows.How do i make sure that it does not grow?
View 11 Replies View RelatedI have a database that I am trying to recover space from, it consists mostly of unallocated space, but I can’t seem to get that unused space released.
Database size: 40,245.13 MB
DatafileMB: 38,063.63, DataAvailableMB: 37,085.15
LogfileMB: 2181.51
Sysfiles shows:
fileidgroupidsizemaxsizegrowthstatusperfname
114872144-112820SomeDB
202792332684354561010486420SomeDB_log
The DB is in simple recovery mode. There are no open transactions (used dbcc opentran).
The server is running SQL Server 2014 and the DB is in compatibility mode SQL Server 2008 (100). It was upgraded to 2014 a month or two ago.
I have tried to re-size the log to 100mb, but any way I have tried (none gave errors), the log file remains the same size. I have tied to shrink the log file (through the UI and via DBCC commands) without success; no errors, but also no change in file size.
I have checked Log Reuse Waits, just in case, and as expected it showed “NOTHING” (select log_reuse_wait_desc, name from sys.databases)
I tried running a checkpoint, but that did not allow any resize or shrink to work.
I have tied creating large transactions to move the used point in the log file, in case this was the issue. I did this by creating tables that I drop after large inserts. While it shows me that the log space % used increased, the log file still does not allow the space to be reduced.
The following is what I was using for the transactions to get the log used.
BEGIN TRAN
select a.* into testtable from sysobjects a, sysobjects b, sysobjects c
ROLLBACK TRAN
Each insert creates 93,576,664 rows.
Running dbcc SQLPerf(logspace) :
DBLogSize(MB)LogSpaceUsed(%)Status
SomeDB2181.534.204890
Running dbcc loginfo:
RecoveryUnitIdFileIdFileSizeStartOffsetFSeqNoStatusParityCreateLSN
0211437342728192602640
02114373427211437424645701280
Do I just need to continue running large transactions until the log space used gets high enough to get the “end point” in the log to really move? Is there an easier way to accomplish this (I have several DBs that have the almost identical problem), what I am using moves the Log Space Percent Used about a percent on each execution.
Can you implemenent Transactional Replication while keeping the Source and Destination DB's in Simple mode?
View 2 Replies View RelatedHi,
On SQL 2000, if I have a large transaction log for my database and I manage to fill it with a single large transaction but it is not set to autogrow, what happens?
Which system table is this information held in, i restored over 100 databases and want all of them to be simple mode.
I manually set it each time after each restore, but i want to confirm but i cannot find the sys table to do a select on.
I looked at sys.sysdatabases
We have a SQL Server 7.0 database running with trunc. log on chkpt andselect into/bulkcopy checked and need to develop a backup strategy.One of our DBAs insists that since the transaction log is beingtruncated, we can't do a hot backup (a FULL backup in multiuser mode)because if a transaction comes through during the backup it will leavethe backup in an inconsistent state. I'm skeptical, but I don't knowhow SQL Server 7 avoids this problem.If SQL 7 is not truncating the transaction log, it uses thetransaction log to roll forward changes that occurred during thebackup. Obviously if it's truncating the log it must have some way toapply these transactions anyway (such as not doing a checkpoint duringthe backup, backing up the log at each checkpoint, etc.).Can anyone confirm that a hot backup will be valid when trunc. log onchkpt is checked? Does anyone know how SQL 7 accomplishes this?Thanks!James
View 3 Replies View RelatedI have several databases that perform daily backups. Ever since I installed SP2, the backup jobs are failing. The logs state that it's because the database recovery mode cannot be SIMPLE, but need to be either FULL or Bulk-Logged.
Can anyone tell me if this is true, and that I do have to change my recovery mode?
Here's the error:
NEW COMPONENT OUTPUT
Microsoft(R) Server Maintenance Utility (Unicode) Version 9.0.3042
Report was generated on "ICIS-SQL-SERVER".
Maintenance Plan: DB Backup
Duration: 00:08:05
Status: Warning: One or more tasks failed..
Details:
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:09.
Task end: 2007-03-10T05:08:09.
Failed:(-1073548784) Executing the query "BACKUP LOG [hl7 db_SamirTesting] TO DISK = N'D:\mssql\backup\hl7 db_SamirTesting\hl7 db_SamirTesting_backup_200703100508.trn' WITH NOFORMAT, NOINIT, NAME = N'hl7 db_SamirTesting_backup_20070310050809', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:BACKUP LOG [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:09.
Task end: 2007-03-10T05:08:09.
Failed:(-1073548784) Executing the query "BACKUP LOG [dg_efilm_153] TO DISK = N'D:\mssql\backup\dg_efilm_153\dg_efilm_153_backup_200703100508.trn' WITH NOFORMAT, NOINIT, NAME = N'dg_efilm_153_backup_20070310050809', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:BACKUP LOG [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:09.
Task end: 2007-03-10T05:08:09.
Failed:(-1073548784) Executing the query "BACKUP LOG [hl7 db] TO DISK = N'D:\mssql\backup\hl7 db\hl7 db_backup_200703100508.trn' WITH NOFORMAT, NOINIT, NAME = N'hl7 db_backup_20070310050809', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:BACKUP LOG [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:08.
Task end: 2007-03-10T05:08:09.
Failed:(0) Database 'hl7 db_SamirTesting' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:08.
Task end: 2007-03-10T05:08:09.
Failed:(0) Database 'dg_efilm_153' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:08.
Task end: 2007-03-10T05:08:09.
Failed:(0) Database 'hl7 db' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Back Up Database (Full) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All databases
Type: Full
Append existing
Task start: 2007-03-10T05:00:06.
Task end: 2007-03-10T05:08:08.
Success
Command:EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupmaster''
GO
EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupmodel''
GO
EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupmsdb''
GO
EXECUTE master.dbo.xp_create_subdir N''D:mssqlackuphl7 db_SamirTesting''
GO
EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupdg_efilm_153''
GO
EXECUTE master.dbo.xp_create_subdir N''D:mssqlackuphl7 db''
GO
BACKUP DATABASE [master] TO DISK = N''D:mssqlackupmastermaster_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''master_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [model] TO DISK = N''D:mssqlackupmodelmodel_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''model_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [msdb] TO DISK = N''D:mssqlackupmsdbmsdb_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''msdb_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
Please help,
-tim
Hi,
What is the impact of changing the recovery mode of a database from Full to simple? The client I am at has set their database to full recovery mode, set their log files to grow automatically. But I don't think they have ever done a backup of their transaction log (it has grown to over 19Gig, where the data portion of the database is only around 400M).
What is the impact of truncating the transaction log now? After truncating it, i would like to shrink the file to a managable number and change the recovery mode to simple (they don't need transaction log backups)
Any info on this would be appreciated.
Thanks in advance
Jim
how to put sql server database in suspect mode intensely and get it out from suspect mode to normal mode.
i am using SQL server 2008 R2
Hi,
I am designing a site using Visual Web Developer, CSharp and Sql server Express.
One the contact page I want to put a form that allows users to enter details about
themselves. On clicking the button this will be stored in the database under a table
called subscribers. The form will have, name, address, telephone, email fields etc.
With the email addresses from the visitors I want to be able to keep them in
a newsletter section or similar which is automated so they recevie emails from time to time
Could somebody suggest a tutorial which shows how to complete this process
using c sharp and sql.
Thanks for you time
Prontonet
Have a database that's in "Simple" recovery mode whose .ldf has grown to 270GB. This database is a data warehouse so "full" is not required. I put it in simple mode a month ago and shrunk the log down and now it's filled up the disk.
What steps can I take to mitigate this in future? I've read that this is caused by long running transactions which fill the log for DR purposes. Should I put the database back into full mode and backup/truncate daily.
The auto-growth is set to 128MB which is very low.
I have a database that is set to Full recovery model, I would like to switch to simple. I must perform some procedure before doing so?
The size of the transaction log is very high in this database, I would like to decrease it before moving to simple, have a problem doing that?
Thank You,
Ralph Haddad
When we do a full database backup manually, we are seeing the trn file reflect the current date/time, but we are not seeing the mdf reflect the new date/time. And we are not seeing the transaction log file decrease in size. the recovery mode is set to full, do we need to change to simple to see both the mdf being backup'ed?
View 5 Replies View Relatedhi,
we have a SQL Server 2000 database which we set to 'SIMPLE' recovery mode at 6pm (due to nightly large data loads). We revert back to 'FULL' recovery mode at 6am.
My understanding was that in 'SIMPLE' recovery mode, the transaction log would not grow because it would automatically be truncated after a checkpoint. However this is not the case. I thought perhaps it could be due to a long running uncomitted transaction, but when I ran 'dbcc opentran', the oldest running transactions doesn't last for more than a couple minutes. I manually run a 'checkpoint' command as well in the hope of forcing the transaction log truncation. I repeat this a couple of times to no avail. When I run 'dbcc sqlperf(logspace)' , I can still see the transaction log growing.
It is not until I run 'backup log db with truncate_only' that the transaction log gets truncated.
I do not understand, why the transaction log does not get automatically truncated in SIMPLE recovery mode?
Andrew
Something strange is happening to our SQL Server DB (2000). Thetempdb transaction log file continues to grow (quite slowly) for noapparent reason. We have it in simple mode, and I have tried a manualcheckpoint command and manual shrink (of the log file only). Thereare no unusual SQL's (large or small) going on. A "heavy hitter" wouldmake it grow fast, not 10 MB every 30 minutes or so. This server hasbeen in production for over a year with no similar issues to this.Anyone encounter a similar situation? This started (as far as we cantell) sometime yesterday. It is growing about 200 MB a day, and is upto 600 MB now, with all but 8 MB "used". For now we added space, butof course that is not a long term solution. The two "data" files(each had a 200 MB initial allocation) have never gone much above 100MB each used (they are each about 100 MB now and have been that wayfor several days, but have shrank and grown). There are about 30small to medium sized "regular" databases on this instance.Any help would be appreciated, especially if there is a way we can fixthis without bouncing the engine (I know, wishful thinking...). The OSis Win 2000, SP3. SQL Server is at 2000, SP 3a.THANKS IN ADVANCE!
View 3 Replies View RelatedIs this Possible, If database is in Simple recovery Mode and the ldf size gets increased?? .
mdf size : 159 GB (171,383,717,888 bytes)
ldf size : 6.46 GB (6,945,505,280 bytes).
My question is if the recovery model is in Simple Mode then why the log gets generated high.
dbcc sqlperf(logspace) --output
DATABASE Logsize(MB) Log space used(%) status
mam 6623.742
0.4305579
0
Is there any issue or it is Normal.
I am amazed to see this morning that log file consuming whole disk space even though the database is in simple recovery mode.
What could be the reasons to fill in the space even in simple recovery mode??
I have discovered that there is an extended procedure called xp_fixeddrives, which can check how much space you have on your SQL Server's drives, it works fine. Can some one tell me what can I use to monitor the above (space used on drive) on servers that do not have SQL at all. Remember I want to call that from my SQL NOT from VB
View 1 Replies View RelatedHello,I have an EM Job script that backups up my databases using SQLsafe to atarget UNC.Sometimes, the target server that will store the backups is off line orit's disk is full.I am wondering how I can check to see if the machine is up via the joband secondly, check the disk space.If either check fails, I would then check another machine machine.Any ideas appreciated,ThanksRobSQL 2000 Server and Enterprise, Windows 2003SQL 2005 Server and Etnerprise, Windows 2003Target storage is a Windows 2003 and I connect via UNC
View 1 Replies View RelatedI have a small, ~10GB SQL 2008 R2 database, that was setup with simple recovery. We do full backup each night at midnight when no one is using the database. Is there any problems with doing differential backups during the day when users may be writing to the database? Could I even do hourly differential backups while users are using the database? I'm conflicted about switching over to full recovery mode and using transaction logs to have the ability restore data between backups. If I can do a couple daily differential backups while users are using the database during the day, in addition to our nightly full backups, than I live with simple recovery mode.
View 3 Replies View RelatedWondering whether I can have following included in a script file:
1. set the current single user db from Full to Simple recovery mode.
2. Checkpoint and shrink the transaction log file (release all unused space)
3. set the current single user db from Simple recovery to Full recover mode.
Hi there - can anyone advise on the following issue. We have recently performed some server side tracing on a particular SQL instance over 24hr period. We are now attempting to load these into a database for analysis. Here lies the problem.
When we are loading the profiler trace files (one at a time) into the database the transaction log is growing at an excessive rate. Even though the database is in SIMPLE mode.
We are loading the traces using the command:
INSERT INTO sqlTableToLoad
SELECT * FROM ::fn_trace_gettable('MytraceFileName', DEFAULT)
Can anyone advise how we could possibly get round this issue as we're running out of space due to the transaction log.
Thanks
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
Hi!
We use SQL Express in our Applikation in file mode. Users can create databases in different folders and pathes. Each time a user loggs into our applikation, we attach the db he choosed, and every time he closes the applikation, we detach the db.
While this works fine in Windows XP, we have serious problems with Windows Vista.
We tried a connectiong string with "attachdbfilename", "sp_attach_db" and SMO server.AttachDatabase
Where could we get some more advice for our problem. It is in fact an issue of UAC.
Best regards,
Reinhold
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
I have a bat file that kicks off a master package, which kicks off about 300 child packages. My bat file is working correctly, however there seems to be issues executing packages in 64 bit mode.
So my question is...
Is there a way to specify in the bat file to execute packages in 32 bit mode and not 64 bit?
bat file:
"C:Program FilesMicrosoft SQL Server110DTSBinnDTExec.exe" /f "E:MasterPackage.dtsx"
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies View RelatedI have a raw file destination and am using a variable to store the filename. In an earlier task, I create the value in the variable. User:Filename ... set to C:Test.txt.
When I run the package, I get the "Error: 0xC0202070 at DFT Tekelec Call Events, RFD Tekelec [1365]: The file name property is not valid. The file name is a device or contains invalid characters". error. I then set a breakpoint to examine my variables on the DataFlow pre-execute event and found my variable showing the value "C:\Text.txt" ... so apparently XMLA is adding the escape character when it stores the value in the variable but not retracting it when it uses the value as the filename.
What am I missing? Can I not use pathing in the variable? And if that's the case, how do I specify a path. Went back through my Rational Guide to Scripting SSIS but did not find this addressed specifically ... my second option being build the fiilename by script and set the raw file destination property directly via script.
We would like to deploy SSIS packages as an ETL Tool to an appserver that does not have SQL Server 2005 installed. Is this possible, or does it HAVE to be executed on the server with SQL 2005 installed?
Kevin
One annoying problem has occurred....I want to put database in offline mode....but it is giving me some error...
"ALTER DATABASE failed because a lock could not be placed on database [database]. Try again later. ALTER DATABASE statement failed. (Microsoft SQL Server, Error: 5061)" ...
Durning install I selected Window's Authentication only, but now it seems we may need to use a Mixed Mode with an SA account etc... is there anyway to switch SQL 2005 to use Mixed Mode after the fact?
View 1 Replies View RelatedWe have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.