Database In Suspect Mode
Apr 19, 2004
Hi
my database went into suspect mode. i tried to reset the status database by "sp_resetstatus abc". It is giving the message
"Prior to updating sysdatabases entry for database 'cr2db', mode = 0 and status = 260 (status suspect_bit = 256).
For row in sysdatabases for database 'cr2db', the status bit 256 was forced off and mode was forced to 0.
Warning: You must recover this database prior to access."
please let me if you have any solution to this problem.
thank you in advance
ricky
View 14 Replies
ADVERTISEMENT
Jul 27, 2015
how to put sql server database in suspect mode intensely and  get it out from suspect mode to normal mode.
  i am using SQL server 2008 R2
View 5 Replies
View Related
May 12, 2000
I have a database in suspect mode. There is no backup of this database.
I've followed the troubleshooting and it isn't working out.
There are 3 steps:
1. execute sp_resetstatus
2. use alter database to add data file or log file to the database
3. stop and restart SQL Server
4. free disk space and rerun recovery
I've tried to make it, but the step # 2 haven't worked.
Then I tried step 3, however the database is still in suspect mode.
What should I do?
Is there something I am missing?
Thanks,
Fábio
View 1 Replies
View Related
Feb 26, 2002
Hi,
Could anyone please tell me steps to recover the database from the suspect
mode. The backup I got is very old. Can it be recovered without the backup.
Thanks in advance
John Jayaseelan
View 1 Replies
View Related
Apr 13, 2001
Hi,
When i tried to restore database from the Network m/c ...upto 60% of the restoration process went well,But after that i got message saying that
" Communication link failure " then database went in to LOAD/SUSPECT mode,
This happend in Active/Active Cluster environment and at the same point of time Fail over occured and resources moved to other node.
i tried by running SP_RESETSTATUS stored procedure to change the status of the Database ,But no use...
Then i deleted the Database and recreated and restored.. because it was a test server...BUT if it happens in Production what to do?????.....
Is there anyway to over come such situations...
Thanks in advance
Mar R
View 1 Replies
View Related
Sep 21, 2007
Dear Experts,
I'm using sql server 2005, and now i'm trying to restore with one backup. then i'm getting error saying that MSDB database in suspect mode.
how to make the DB to the normal mode....
please help me in this regard
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 1 Replies
View Related
Apr 19, 2007
Database is in suspect mode and I cant get it out. Customer does not have a backup.........
getting Errors starting
Analysis of database 'SBM01' (7) is 100% complete (approximately 0 more seconds)
ex_raise2: Exception raised, major=79, minor=87, severity=22, attempting to create symptom dump
Error: 7987, Severity: 22, State: 1
A possible database consistency problem has been detected on database 'SBM01'. DBCC CHECKDB and DBCC CHECKCATALOG should be run on database 'SBM01'.
ex_raise2: Exception raised, major=79, minor=87, severity=25, attempting to create symptom dump
Using 'dbghelp.dll' version '4.0.5'
*Dump thread - spid = 51, PSS = 0x19b591e0, EC = 0x19b59510
*
* User initiated stack dump. This is not a server exception dump.
Error: 3314, Severity: 21, State: 3
Error while undoing logged operation in database 'SBM01'. Error at log record ID (222:9976:477)..
Error: 9004, Severity: 23, State: 2
An error occurred while processing the log for database 'SBM01'..
Error: 3414, Severity: 21, State: 1
Database 'SBM01' (database ID 7) could not recover. Contact Technical Support..
View 16 Replies
View Related
Jun 1, 2015
In the work I came up against a situation when the working database at the end of day went to the Suspect Mode.And the archive was in many hours before. To transfer it in normal mode, until isn't made repaired base it was impossible. DBCC checkdb also refused to run because the database is in this mode.
View 7 Replies
View Related
Oct 18, 2006
Rajiv Parekh writes "Since last few weeks on Startup of System few Databases moves to SUSPECT MODE.
This probelm is not daily but atleast 0nce in week.The day is is not fixed. Have Unistalled SQL & again Reinstalled, but the problem continues.
Please inform my Why this problem & what is the Solution."
View 3 Replies
View Related
Apr 25, 2007
hi all,
one of my sql database went in suspect mode can any one advice why it has happened is it the problem with sql server . This has happend for the second time in 4 months .
thanks and regards
jk
View 3 Replies
View Related
Apr 24, 2015
As I know the database should be restored from backup and logs reapplied. That’s the first and generally recommended approach any time a DB is suspect, whether it’s from log or data file corruption.But if I have no backups then we follow below steps ( after Googling I found these steps on most of the websites ):
1.EXEC sp_resetstatus ‘yourDBname’;
2.ALTER DATABASE yourDBname SET EMERGENCY
3.DBCC checkdb(’yourDBname’)
4.ALTER DATABASE yourDBname SET SINGLE_USER WITH ROLLBACK IMMEDIATE
5.DBCC CheckDB (’yourDBname’, REPAIR_ALLOW_DATA_LOSS)
6.ALTER DATABASE yourDBname SET MULTI_USER
Now my question is,Â
1. If after executing DBCC CHECKDB at 3rd step, it shows inconsistency.Then I will execute SET SINGLE USER WITH ROLLBACK & if after executing DBCC CHECKDB at 3rd step, no errors found. Then what will be the steps?
2. When we execute DBCC CHECKDB (' DBNAME ', REPAIR_ALLOW_DATA_LOSS) how can we recover lost data during process.As far as I know some data will loss and if it will happen then business will get suffered.
3. Why run DBCC CHECKDB() WITH REPAIR_ALLOW_DATA_LOSS if there are no consistency errors in the database?
View 8 Replies
View Related
Jan 14, 2015
I Want to test for Automatic switch between primary and secondary.
How do i do it ?
or
I need this for some purpose : How to set suspect mode for a database ?
View 1 Replies
View Related
Apr 29, 2008
Hi
I want to suspect database
stop server first
I try to rename C:Program Files (x86)Microsoft SQL ServerMSSQL.1MSSQLDatamsdbdata.mdf to msdbdata.sav
and then start the server
use command to check:
SELECT status & 256 FROM master.dbo.sysdatabases WHERE name = database_name
if the result is 256,it means the msdb is suspect,but the result is 0,it same as the normal status
do you know how to set database suspect with this way, or do you know other way to suspect databse.
absolutely,I could re-back my server noraml with your way
Thanks
View 6 Replies
View Related
Sep 13, 2001
can anyone tell me what would casuse this error:
2001-09-12 21:21:01.11 kernel udopen: Operating system error 32(The process cannot access the file because it is being used by another process.) during the creation/opening of physical device C:MSSQL7dataReporting.mdf.
2001-09-12 21:21:01.11 kernel FCB::Open failed: Could not open device C:MSSQL7dataReporting.mdf for virtual device number (VDN) 1.
What other things would cause the Reporting.mdf to be locked so the SQL server could not open it?
View 2 Replies
View Related
Sep 6, 2007
Hi,
I have mssql 2005 installed and i see that MSDB database is marked as suspect. I almost tried all the steps which are submitted in the forums.
1) I shut down the server, navigating to the directory 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn' and doing the following: start sqlservr.exe -c -T3608
2) renamed the damaged msdb files (msdbdata.mdf and msdblog.ldf in the 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData' directory)
3) Run the instmsdb.sql script in the 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLInstall' directory
--x---
When I executed third step it returned me below error:
Msg 926, Level 14, State 1, Line 63
Database 'msdb' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Please advice me.
View 10 Replies
View Related
May 29, 2001
Mu MSDB database is in suspect mode. Anyone have any info to help get it out. It tells me that it cannot find the path specified for the backups, yet the path exists and there is more than enough disk space even though it says that there is not? I am confused. First time getting this error and doesn't make sense why.
Thanks!
View 1 Replies
View Related
Jun 12, 2006
In SQL 2005 when a database is in suspect mode there is no obvious way to tell (via SSMS). In SQL 2000 the word "suspect" was displayed (via Enterprise Manager) next to the database, and the respective database icon was grayed out. Why was this behavior changed for SQL 2005? From a disaster recovery standpoint, it is very important to see immediately if a database is in suspect mode.
View 9 Replies
View Related
Mar 14, 2007
Hi experts,
I was trying to restore a "mdf" (MSDE) database for a HP OpenView product, unfortunately at the initial state of restoration, i got the following error messages:
Database 'openview' cannot be opened. It has been marked SUSPECT by recovery.
See the SQL Server errorlog for more information.
Any valuable suggestions on how to set/change the current "SUSPECT" mode so that the 'openview' database can be opened?
Many thanks,
Cheng
View 2 Replies
View Related
Mar 31, 2007
I created the db with the attached script and I am able to access ituntil I reboot the server. I've tried enabling flag 1807 via the SQLserver service and the startup parameters of the instance. In allcases the database always come up suspect after a reboot. There wasone instance where I was able to recover, but I am not sure how thathappened.Does anyone have an idea of how I can reboot the server without thedatabase becomming suspect?USE MASTERGODBCC TRACEON(1807)GO--DBCC TRACEOFF(1807)--DBCC TRACESTATUS(1807)GOCREATE DATABASE ReadyNAS ON( NAME = ReadyNAS_Data,FILENAME = '\NAS1NASDiskSQL ServerReadyNASReadyNAS_Data.mdf',SIZE = 100MB,MAXSIZE = 20GB,FILEGROWTH = 20MB)LOG ON ( NAME = ReadyNAS_Log,FILENAME = '\NAS1NASDiskSQL ServerReadyNASReadyNAS_Log.ldf',SIZE = 20MB,MAXSIZE = 100MB,FILEGROWTH = 10MB)
View 5 Replies
View Related
Jun 13, 2007
My database is marked as suspectI am using SQL Server 2000,I ran the command sp_resetstatus it executes succesfully. but still the database is in suspect state.can any one tell me how i recover my data.thanks in advance
View 1 Replies
View Related
Nov 23, 1999
Im running SQL 7.0 with a large heavily used 4Gb database. After a while the database is marked suspect. What can be the cause to this ? Please email me and I can send you additional information about hardware and the system.
View 3 Replies
View Related
Dec 9, 1999
Hi everyone,
I really need help on this, one of my databases is marked suspect. I did tried to execute this command below (scripts):
use master
go
sp_configure 'allow updates',1
go
reconfigure with override
go
update sysdatabases set status=4 where name='security'
go
sp_configure 'allow updates',0
go
reconfigure with override
go
and it release the suspect from the 'Security' database, but it Won't let me access the table,data or nothing. The worse thing is when I stop & start the server again, the database marked suspect again.
Could anybody out the help me on this. Thank in advance, Vu
View 1 Replies
View Related
Apr 8, 1999
I am using SQL server 6.5 sp3 and NT 4.0 sp4.
My SMS database has been marked suspect.
I do not have a backup.
I have read several articles about trying to us sp_resetstatus.
I can not find this sp on my server.
When I try the following:
UPDATE master..sysdatabases status=256 WHERE name = ('sms')
I get the following back:
Ad-hoc updates to system catalog not enabled. System Adminstrator must recongifure system to allow this.
I have searched Microsoft KB and everywhere I can think of. If anyone can help I would really appreciate it.
I even tried reapplying sp3 and rebooting...this did not help either.
Can someone please tell me how to change the status back to normal.....I think this is a it will take..
thanks in advance,
nathan
View 1 Replies
View Related
Mar 5, 1999
I have the original dat files ( 2 seperate log / data) of a database. I have created new devices (same size as originals) and a new database. I replace the new dat files with the originals and the database always comes up as a suspect. I have done this with the other 7 databases on my server and none have similar problems. This database was created different then others using new database and new devices routine rather than creating the devices first. Any Ideas?
Thanks in Advance.
View 1 Replies
View Related
Nov 18, 1998
Hi... I have this problem with my database (dunno how this thing happen). Today, 2 of my databases have been marked as 'suspect' (grey color in SQL Enterprise Manager). In ISQL, when I try 2 connect 2 the database (use), the message '
Msg 926, Level 14, State 1
Database 'MYUAT' cannot be opened - it has been marked SUSPECT by recovery. The SA can drop the database with DBCC.'
appeared.
Don't understand Y this occurred...
Thanks in advance for any help...
~Cheers~
View 1 Replies
View Related
Jun 15, 2004
my database is in suspect,how to correct it?
thx in adance..
View 2 Replies
View Related
Sep 9, 2004
Hi all,
We recently had some kind of error on one of the server's hard drives. The network guys, reinintialized (or something) and were able to bring everything back. However, two of my databases now is "Suspect" and can't be used. Both the MDF & LDF exist, and there are no indications of actual data loss. What can I do with a "suspect" database ? SQL 2K
What should I do to recover these two databases?
Thank you for all your suggestions.
View 2 Replies
View Related
Sep 29, 2004
I could not open my database.It says its Suspect and could not open and not displaying any of the objects
What should be the reason and what is steps i can do make it up and running.
Thanks
View 10 Replies
View Related
Oct 3, 2005
:mad:
One of my prodn databases went into suspect mode today..
I was able to recover it.
The tech support guyz had rebooted the server couple of times
(out of ignorance) cos they thought if wud fix it.
I lost the sql errpor log file which had the error details as to why db when into suspect....so my questions are..
1. Probable reasons why db when into suspect mode.
2. Any other way to find out about the error details.
3. When I ran dbcc checkdb with repair_rebuild option
for some tables it gave error
"Parent node for page (1:13075) was not encountered"
How can i resolve the consistency errors.
Is DBCC CHECKTABLE sufficient.???
View 12 Replies
View Related
Jan 5, 2004
We have an SQL Server 2000 DB server with several databases on it. Frequently, one of the DBs will have a state of "Suspect." This appears to occur after our 3rd party backup software runs a full backup on the weekends.
How can I begin to troubleshoot the cause of this issue? Has anyone seen anything like this?
thanks,
Jeff
View 5 Replies
View Related
Nov 1, 2005
Why do i keep getting this error ?
Mary Mary
Yes O !
View 3 Replies
View Related
Apr 12, 2007
Hi everyone,
I hope you could help me.
I have a database that was marked as suspect, i change is state but now i want to extract the information of the database and a couldn't because de database have several erros include 2 allocation erros.
How could i solve this problem? I don't have a recent database backup.
thanks to everyone.
Pedro Silva
View 7 Replies
View Related
Apr 16, 2007
Hi all,
I have a suspect database caused by a disk error on a Raid5 disk. I'm a bit of a novice on SQL and am using SQL 2005. I have tried the following and can't get the database status to reset which means the DBCC checkdb command does not run. The client I am fixing this for has no backup of the data at all.
USE master
GO
sp_configure 'allow updates', 1
GO
RECONFIGURE WITH OVERRIDE
GO
EXEC sp_resetstatus 'nhd2007';
GO
sp_configure 'allow updates', 0
GO
RECONFIGURE WITH OVERRIDE
GO
DBCC checkdb ('nhd2007',NOINDEX);
GO
I get the following error back:-
Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
The suspect flag on the database "nhd2007" is already reset.
Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
Msg 926, Level 14, State 1, Line 3
Database 'nhd2007' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
The error in the SQL Log which is causing all the problems is:-
Message
SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:3425329; actual 25600:1744858624). It occurred during a read of page (1:3425329) in database ID 24 at offset 0x00000688862000 in file 'E:hd2007hd2007.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Any advice on what I can do to get some access to the data would be great.
Thanks
View 9 Replies
View Related
