Database Mail
Jun 6, 2008
Hi All,
I am going made here. I set up database mail on a 2005 box. It was working fine, untill I needed to reboot it. Now it does not.
If I run a test with 2000 it works fine. However 2005 does not.
I go to the test mail bit and it says its sent, but it never turns up. So I ran:-
SELECT * FROM msdb.dbo.sysmail_event_log
And I get the fowwloing error:-
259error2008-06-06 16:38:24.493Could not retrieve item from the queue.5708NULLNULL2008-06-06 16:38:24.493UK_domainUSER
Any ideas at all would be gratfull aprisiated!!!
Thanks
Dave
Dave Dunckley says there is a law for the rich and a law for the poor and a law for
Dirty Davey.
View 8 Replies
ADVERTISEMENT
Mar 7, 2007
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
View 1 Replies
View Related
Feb 20, 2008
Hi all....
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
Thanks
Rajesh
View 10 Replies
View Related
Sep 1, 2006
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
View 4 Replies
View Related
Mar 9, 2007
Hi every body
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile.
I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is
"Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
please help me.
POUYAN
View 21 Replies
View Related
Nov 6, 2007
Hi,
Can anyone please tell me the difference between Database Mail and SQL Mail.
Thanks in Advance
R.K.Nair
RKNAIR
View 1 Replies
View Related
Jan 26, 2007
Hi
I am trying to change the host database (MSDB) of Database Mail to some new database (say NewDB) and
unable to make DatabaseMail90.exe point to this new database (NewDB).
Is it possible to do this?
Thanks
Uddemarri
View 4 Replies
View Related
Sep 13, 2006
HI,when configuring database mail in sql server 2005 i am getting the below error.The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 4 (2006-09-13T13:50:18). Exception Message: Could not connect to mail server. (An established connection was aborted by the software in your host machine). )when i ping the smtp server, i could successfully connect to the smtp server. but when i send a test email i am getting the above error message saying not able to connect to the server.please help
View 2 Replies
View Related
Aug 22, 2007
Hello,
I am trying to use database mail to send out a list of data. I am using a number of queries to build a string and each query needs to have its results displayed on a new line when the email is viewed using Outlook.
I am having trouble adding a line break into the string. Any pointers would be great.
Thanks Alot
Steve
View 2 Replies
View Related
Apr 9, 2008
What is equavalent in oracle database which does the job similar to Database Mail in sql server.
i use database mail in sql server to send mail.
I do have jobs set, which gets fired every ten minutes. it uses msdb.dbo.sp_send_dbmail
and i have a profile created under database mail which has all the info related to the smtp email acct.
our client now wants our project to also work on oracle.
Thank you very much for the information.
View 1 Replies
View Related
May 2, 2008
hi,
In database mail,
while execting sp_send_dbmail i want foolowing thing to be done.
@recipient=select emaild from <tablename>
Is it possible ?
View 2 Replies
View Related
May 26, 2008
Please Concentrate on colored TSQL;
I should i pass dynamic text to database mail in @body.
Declare @charstrn varchar(20);
Declare @C_name varchar(20);
Declare @l_code nvarchar(20);
SET @charstrn = @S_name+'Welcome to India.You are now registered Student under counslerName'+@C_name+'BranchOffice'+@l_code;
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Pradeepvarun',
@recipients = @emailid ,
@body = (select @charstrn),
@subject = 'You are now Registered in APT';
View 1 Replies
View Related
Mar 19, 2007
I have an application which allows communication through an internal blog. We have to monitor all communications for compliance but I'm unable to find a solution to my problem and hope someone can help.
The application allows IM/Email/Blog entries to authenticated members. We can take these communications and send them to our exchange server. However the FROM address is always the profile owner setup in SQL.
Question:
I want the FROM address to list the person starting the conversation and not setup individual profiles for each person using the application. We already have the ability to capture the communication through the application and send it to exchange but the FROM address doesn't reflect the person initiating the conversations.
Is this possible?
Thank you, MP
View 1 Replies
View Related
Mar 30, 2008
Hi, i need to send emails from sql server. to configure the setting i need to open database mail configuration windows right? But i dont have database mail icon or tab under management folder. I only have archieve under server roles. Help me.. Urgent.Thanks
View 7 Replies
View Related
Feb 2, 2007
I'm keen to use database Mail in SQL 2005. It seems to work well and save's me having to implement a queue, audit logging for sent/errored etc, as SQL2005 can take care of all of that for me.
heres the but..
Is there any way to specify the "From" email address in sp_send_dbmail I know you specify it as part of email account & profile but I want to override that.
I just wanted to be able to keep an audit of all the emails that where sent from an asp.net website and thought i could get that functionality "out of the box" with SQL 2005 and DB Mail, but with out being able to set the from: address its not going to work
Any one have a sugesstion?
Thanks
View 1 Replies
View Related
Apr 9, 2008
Dear Profetionals ,
I am new in SQL I would like to set up a Database mail but I have no Mail Server in my Domain. So, I have to use yahoo pop3 and smtp whitch are mentioned here :
Incoming Mail (POP3) Server:
plus.pop.mail.yahoo.com (Use SSL, port: 995)
Outgoing Mail (SMTP) Server:
plus.smtp.mail.yahoo.com (Use SSL, port: 465, use authentication)
Account Name/Login Name:
Your Yahoo! Mail ID (your email address without the "@yahoo.com")
Email Address:
Your Yahoo! Mail address (e.g., user@yahoo.com)
Password:
Your Yahoo! Mail password
I used my yahoo email account and plus.smtp.mail.yahoo.com port: 465 to configure the Databast Mail
But no test mail recieved , Then I tried SQL help and found this SELECT * FROM msdb.dbo.sysmail_event_log ;i used this SP and the result was :
1 information 2008-04-08 14:53:53.397 DatabaseMail process is started 1188 NULL NULL 2008-04-08 14:53:53.397 IMPSDevuser2 error 2008-04-08 14:54:11.190 The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2008-04-08T14:54:10). Exception Message: Could not connect to mail server. (No such host is known). ) 1188 1 NULL 2008-04-08 14:54:11.190 saWould you please help me find the error?
View 1 Replies
View Related
Apr 12, 2006
I am trying to configure Database Mail on a new installation of SQL Server 2005 and the 'DatabaseMailUserRole' does not exist.
How do I add this role to the server?
View 8 Replies
View Related
Aug 16, 2007
We have a user set up for our .net framework (webuser) with access to a database we created for our website. "webuser" needs to be able to send out emails using Databse Mail (SQL Server 2005) via a stored proc by excuting msdb.dbo.sp_send_dbmail. This stopred proc works fine when I am logged in as administrator but won't work for "webuser" and I can't seem to grant DatabaseMailUserRole to our that user either. What do I need to do?
I have bee trying to find a "how to" on setting this up but have been unsuccessful.
View 3 Replies
View Related
Aug 9, 2006
Dear Folks,I am trying to finish my configuration of Database Mail on my sp1 build 2153 sql server. I believe to have set it up properly but i still can't get a test message through. My error message reads:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 3 (2006-08-09T15:14:00). Exception Message: Cannot send mails to mail server. (Transaction failed. The server response was: Mail from <account email address> rejected for policy reasons.). )
Everything that needs to be enabled, i.e. service broker, SQL Server Agent properties, deafult profile in msdb table, services restarted. Is this message a result of Sql server policy or the smtp server? Is there a process in the transaction Sql server initiates that could be causing the policy violation that i need to tell the email admin about?
Thanks for your reply.
-C
View 2 Replies
View Related
Dec 6, 2007
I'm trying to use SQL server email, I am able to use it from the administrator account, but anyone else gets the "EXECUTE permission was denied on the object 'sp_send_dbmail'. The MSDN says "To send Database mail, users must be a user in the msdb database and a member of the DatabaseMailUserRole database role in the msdb database. To add msdb users or groups to this role use SQL Server Management Studio or execute the following statement for the user or role that needs to send Database Mail." . The only problem is - I have no idea what the user name / role database is. I've plunked around the MSDB database and I can't find any documentation, help, anything. I know the login name of the user I want to enable to use database mail, but obviously that's not what the bit of SQL code that MS provided is looking for. Is there an "AddMember" function somewhere?? I don't see it. Should it really be this complicated to do simple email tasks - am I looking in the wrong place?
View 6 Replies
View Related
Oct 3, 2007
Hi,
I have setup a stored procedure which sends an email. It is working fine and I am also receiving all the emails. But, when I checked the Database Mail log in SQL Server, there are hundreds of error messages which I am not able to decide why?
Can someone please provide information on these?
Date 10/3/2007 5:31:13 AM
Log Database Mail (Database Mail Log)
Log ID 2385
Process ID 5464
Last Modified 10/3/2007 5:31:13 AM
Last Modified By MMITask_PWDXServer
Message
1) Exception Information
===================
Exception Type: System.NullReferenceException
Message: Object reference not set to an instance of an object.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Objects.Account GetAccount(Int32)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DataAccessAdapter.GetAccount(Int32 accountID)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
View 1 Replies
View Related
Apr 7, 2008
I have configured sql 2005 to send Database mail via SMTP using a profile and account that works fine during a test send. However, when I set myself up as an opperator (with the same email as the test) and tell a job to email me upon sucess, and run the job I dont get the email.I looked at the error log, and get the error that: "an attempt was made to send an email when no email session has been established"Any help is greatly appreciated!Dan
View 2 Replies
View Related
Feb 29, 2008
I'm having a problem with SQL Server 2005 not being able to send all of my messages. Occasionally when we batch a large number of messages together, we run into problems because the SMTP server can't process them fast enough, and the message doesn't send due to a timeout. I know I have increase the number of retries, but I'd rather just increase the timeout setting. Does anyone know where I might be able to do this at? The mail admins are also looking at modifying the rules in SMTP so that messages from these servers don't go through the vigor of SPAM and phishing detection. Hopefully that will speed it up, but I'd like to give it a little extra leniency on the SQL side as well. Any suggestions?
View 3 Replies
View Related
Jun 11, 2007
HI,
I am seeking help on sql 2005 database mail.
I just installed a new sql 2005 with sp2 on a windows 2003 sp1. I enable the database mail in surface area configuration and configured the database mail, but I got a error message when I tried to send a test mail, I used the sql server and sql server agent startup account to set up the mail.
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-06-11T20:17:57). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it).
)
thanks.
View 2 Replies
View Related
Jun 26, 2007
Hi
I have set up database mail.
I know the settings are correct because I use the same ones for MS Outlook on the same machine.
I am getting the following error.
-----------------------------------
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 6 (2007-06-26T06:25:01). Exception Message: Could not connect to mail server. (No such host is known). )
------------------------------------
Service broker is enabled.
Database mail is started.
i really don't know what else it could be.
...Does SQL Server Agent have anything to do with Database mail?
Any other suggestions gratefully accepted..
ICW
View 8 Replies
View Related
Sep 13, 2007
Ive created an Account and a Profile using Configure Database Mail Wizard.
Ive tried to send an email using this account, but I get this error
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-09-13T17:05:09). Exception Message: Cannot send mails to mail server. (Server does not support secure connections.). )
Can anyone help?
Regards
Steve
Steve Fouracre
View 2 Replies
View Related
Jan 24, 2008
I recently got the datamail setup and running. I am able to use database test mail to successfully send a test email relay through the SMTP port of the exchange server and then out to the appropriate email adress.
When i use the SP_Send_Dbmail it says Mail Queue. I check the sysmail_allitems it says the Sent_Status is sent but I never receive it.
Everything below executes just fine and places the right information in the right msdb tables. I just never receive the email. Any suggestions on where to look? Service_broker messages is enabled and i restart sqlserveragent also.
use msdb
go
exec msdb..sysmail_start_sp
go
EXEC msdb..sp_send_dbmail
@profile_name = 'DBuser'
@recipients = 'user@yahoo.com',
@subject = 'Test',
@body = 'Test',
@body_format = 'HTML'
View 1 Replies
View Related
Feb 14, 2008
Hi,
I have the table like
Id Pickuptime
1 2008-02-14 13:07:06.317
If the record is inserted to the above table that would look at a pickuptime field in a table and if pickuptime is 2008-02-14 13:07:06.317 after 6 hour from the pickuptime then I would send a email to briteindia_kumar@hotmail.com
How i would do this would any one help to me.
Thanks
kumar
View 2 Replies
View Related
Jan 30, 2008
Hi Friends,
I am finding an error in SQL Server Agent log which is related to database mail configuration. Can any one please guide me how to configure the database mail configuration to transfer the data from SQL CE to SQL server.
Thanks in Advance
View 1 Replies
View Related
Aug 17, 2005
Has anyone been able to configure Database Mail and successfully send an email message? I set it up this afternoon, but all my messages are sitting in the sys_mailitems table of the msdb database.
View 5 Replies
View Related
Oct 7, 2007
Hello everyone,
This is my first participation in this forum
In fact I am trying to prepare myself to earn MCITP and I faced few problems during setting up the following points
- SQL Server Database mail
- Alerts
- Operators
I want to create an internal process to inform me (via email and Net Send) if some errors happened or if some procedures run.
At the beginning I configured the Database Mail then I created new Operator (same name of domain account) and I checked all alert options (email, pager and net send) for this operator.
After that I created a new Alert (Raised based on Error Number) and I selected the created operator to be notified and I checked (email, pager and net send).
Right now everything is good and no problem in all above steps for me
But when the error raised the notification message shown at the operator screen,
But unfortunately nothing was sent to email
Note: I have a website (www.international-systems.net) with SMTP (mail.international-systems.net)
And I have created an email for this operation called (SQL_Server@international-systems.net) but nothing sent to the email
The configuration of my Database Mail was
Email Address: SQL_Server@international-systems.net
Display Name: Essam Binzghayo
Replay Email: SQL_Server@international-systems.net
Server Name: mail.international-systems.net
Port No: 25
Can you help me and try to answer the question
What was wrong in my configuration that caused failure sending email?
Thanks
View 4 Replies
View Related
Aug 7, 2006
I thought I knew.
Under SQL 2005 SSIS I can successfully send email (using their SNMP task). So I thought that was database mail. But the other day I started reading about Database mail and setting up profiles and it had nothing to do with SSIS tasks! So what is it all about?
TIA,
barkingdog
View 1 Replies
View Related
Jan 11, 2008
I have two servers set up just fine using Database Mail. The third server just doesn't want to work for some reason. I am using the same settings except that the email account is different.
The error in the log is:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2008-01-11T09:55:09). Exception Message: An invalid argument was supplied.
)
I ran this
SELECT is_broker_enabled FROM sys.databases WHERE name = 'msdb' ;
to make sure service broker is on and got the following results:
is_broker_enabled
-----------------
1
Any suggestions?
Thanks,
Linda
View 4 Replies
View Related
