Database Marked As Suspect
Jul 7, 2006
Hi all
I tried this command
DBCC CHECKDB (A2PD,REPAIR_ALLOW_DATA_LOSS)
The above command was not executed as there was some long rollback was going from a user...
I stopped and re started the MSSQLSERVR service...
Then i found the follwing error..
how can i work with the database A2PD marked as suspect
Server: Msg 926, Level 14, State 1, Line 1
Database 'A2PD' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Thanks
View 10 Replies
ADVERTISEMENT
Mar 14, 2002
Hello Gurus,
After the power failure my database was marked suspect. According to my associate we will execute SQL command sp_resetstatus. My question is what are the things we have to do first before we execute the command? We are using NT 4.
thanks
Claudio
View 1 Replies
View Related
May 9, 2006
Usman Masood writes "we were using our database named db1. when suddenly it stopped working and upon checking it gave an error that db1 and db2 are marked as suspected. while we were only using db1,,,,what is the cause of this error?"
View 1 Replies
View Related
Jul 23, 2005
Hi,I restored my Windows XP system and discovered that I cannot access aMSDE DB that was saved in D: drive (I restored my primary partition inC). How can I restore it?Thanks a lot.
View 6 Replies
View Related
Oct 21, 1999
Hi there,
I need urgent help regarding a database that has been
marked as suspect.
I need to get the data from the database!!
I have a copy of the structure of the database but I need to get cerain very recent data from the database.
I have tried bcp and it doesn't work.
The backup that I have won't sufice
If a database is marked as suspect, Will it recover?>
And if so how long will it take.
If it won't recover is there any other way of getting the data,
Thanks in advance,
Fin
View 4 Replies
View Related
Nov 17, 2007
I have the MS SQL2000 database failed to recover at computer restart. Now the database is marked suspect. How can I manage to recover the data?
Thank you.
View 5 Replies
View Related
Mar 13, 2007
I have SQL Express SP1 installed on serveral machines, each has one instance and each instance has more than one database.
Recently, I found out some dbs are marked Suspect. MOM tool reported something like:
The database "your-DB" in the instance "Your-Instance" is in a critical state. The state is: Suspect.
I tried to run "DBCC CHECKDB", but it failed.
Can someone tell me what could cause the problem, and how to fix it?
Thanks,
Peter
View 2 Replies
View Related
Jul 15, 2002
Hi all,
I have a big problem with a Database on SQL-Server7.0 running on windows 2000 advanced server. The msdb database is marked suspect. I have tried a few suggestions in the SQL BOL but no luck.
Can anyone help please!
View 4 Replies
View Related
May 29, 2001
We have a new installation on Friday which was running fine. Unfortunately today, the msdb is marked suspect. Do I uninstall and reload SQL server or change the status. We only have a training data on the server presently. Does anybody has any other suggestions? Please help. Thanks for your assistance.
View 4 Replies
View Related
Feb 20, 2007
I've got trouble -- somehow my msdb is corrupt and is marked as "suspect". I cannot open it up or it is apparently devoid of any table, etc.
It's on my SQLExpress instance and I'm willing to blow the entire server away -- since this server has been used as a sandbox for personal use.
Can I simply re-install SQLExpress?
View 2 Replies
View Related
Apr 29, 2008
Hi
I want to suspect database
stop server first
I try to rename C:Program Files (x86)Microsoft SQL ServerMSSQL.1MSSQLDatamsdbdata.mdf to msdbdata.sav
and then start the server
use command to check:
SELECT status & 256 FROM master.dbo.sysdatabases WHERE name = database_name
if the result is 256,it means the msdb is suspect,but the result is 0,it same as the normal status
do you know how to set database suspect with this way, or do you know other way to suspect databse.
absolutely,I could re-back my server noraml with your way
Thanks
View 6 Replies
View Related
Dec 7, 2001
I canceled a restore job, and now the database is marked (Loading). When I go to propertied it tells me "database can't be opened, it's in a middle of a restore" Yet from a Query window I can connect and run queries against that database. Should I just wait until it finishes "Loading" or should I re-start the server?
Thanks
View 1 Replies
View Related
Mar 9, 2000
I have a 3GB DB that I was running an update script on. The sript failed and ran out of transaction log space. I expanded it and stopped and restarted SQL. The user DB is now marked as recovering. How long should I wait for it to recover? I don't want to have to restore again and start all over with my script. Please help.
(By the way this is a restored DB)
Thanks.
LC
View 1 Replies
View Related
Jan 18, 2004
Hello Friends
I had a really big Problem.
Sorry about my Englisch, came from Austria.
After a SQL Database Restore, who ends with no faults, i cannot connect to it.
In the Enterprise Manager it is marked as "in load" and in the Errorlogfile stand following.
"Bypassing Recovery für Database "WINLINE" because it is marked "in load"?
What does it mean! Please help!!
Thanks for all answers
Mike
View 2 Replies
View Related
Apr 19, 2004
Hi All,
Sql Server 7
I have database called ecatalog
i have a scheduled job which shrinks the database every day once at 12 am
today the job got failed
In the view Job history its showing the below contents
-------------------------------------------------------
Database 'ecatalog' is already open and can only have one user at a time. [SQLSTATE 42000] (Error
924) DBCC execution completed. If DBCC printed error messages, contact your system
administrator. [SQLSTATE 01000] (Message 2528). The step failed.
And in Application Log of event viewer its showing the below contents
------------------------------------------------------------------------------
The description for Event ID ( 208 ) in Source ( SQLServerAgent$ABCSQL ) cannot be found. The
local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Shrink Database
- ecatalog, 0xA0C4F8157A744244A61A4ECABE8C6056, Failed, 4/19/2004 12:00:03 AM, The job failed.
The Job was invoked by Schedule 27 (Shrink Database - ecatalog). The last step to run was step 1 (Shrink Database - ecatalog)..
I ran the job manually it worked fine
but now when i go and see the database ecatalog in my Enterprise Manager
it is showing ecatalog(Single User)
What is the meaning of this, will this make any problem to my database
Please help me in this.
Waiting for Reply
Adil
View 4 Replies
View Related
Dec 2, 2000
After I restore a database with SQL the database I cannot access it. However, after restoring using Enterprise Manager I do not have the same problem. The message I get is:
Database 'les_test' cannot be opened. It is in the middle of a restore.
The code I am trying to use for the restore is:
RESTORE DATABASE les_test
FROM DISK = 'c:MSSQL7BACKUPiztrobeta_db_200012011201.BAK'
WITH NORECOVERY,
REPLACE,
MOVE 'biztrobeta_PRI' TO 'c:mssql7DATAiztrobeta_PRI.ndf',
MOVE 'biztrobeta_FGE_Dat1' TO 'c:mssql7DATAiztrobeta_FGE_Dat1.ndf',
MOVE 'biztrobeta_FGX_Idx1 ' TO 'c:mssql7DATAiztrobeta_FGX_Idx1.ndf',
MOVE 'biztrobeta_LOG' TO 'c:mssql7Dataiztrobeta_LOG.ldf'
GO
I tried changing the status in the master..sysdatabases tables, but the restored database was still not accessible. I tried to do this using the following statment:
UPDATE sysdatabases
SET STATUS = 4194316
WHERE name = 'les_test'
GO
Any help is appreciated.
Thanks,
Les
View 1 Replies
View Related
Mar 14, 2008
Please, help
Since a few days ago we are viewing these messages, several time at a day:
3/14/2008 2:18:30 PM AppDomain 1668 (FDESK_CANCUN.dbo[runtime].1679) created.
3/14/2008 2:18:44 PM AppDomain 1668 (FDESK_CANCUN.dbo[runtime].1679) is marked for unload due to memory pressure.
3/14/2008 2:18:44 PM AppDomain 1668 (FDESK_CANCUN.dbo[runtime].1679) unloaded.
In this database only have one assemblie installed created using Vb.Net 2005, please help me how to diagnose where are the problem.
View 2 Replies
View Related
Mar 31, 2007
I created the db with the attached script and I am able to access ituntil I reboot the server. I've tried enabling flag 1807 via the SQLserver service and the startup parameters of the instance. In allcases the database always come up suspect after a reboot. There wasone instance where I was able to recover, but I am not sure how thathappened.Does anyone have an idea of how I can reboot the server without thedatabase becomming suspect?USE MASTERGODBCC TRACEON(1807)GO--DBCC TRACEOFF(1807)--DBCC TRACESTATUS(1807)GOCREATE DATABASE ReadyNAS ON( NAME = ReadyNAS_Data,FILENAME = '\NAS1NASDiskSQL ServerReadyNASReadyNAS_Data.mdf',SIZE = 100MB,MAXSIZE = 20GB,FILEGROWTH = 20MB)LOG ON ( NAME = ReadyNAS_Log,FILENAME = '\NAS1NASDiskSQL ServerReadyNASReadyNAS_Log.ldf',SIZE = 20MB,MAXSIZE = 100MB,FILEGROWTH = 10MB)
View 5 Replies
View Related
Jun 13, 2007
My database is marked as suspectI am using SQL Server 2000,I ran the command sp_resetstatus it executes succesfully. but still the database is in suspect state.can any one tell me how i recover my data.thanks in advance
View 1 Replies
View Related
Nov 23, 1999
Im running SQL 7.0 with a large heavily used 4Gb database. After a while the database is marked suspect. What can be the cause to this ? Please email me and I can send you additional information about hardware and the system.
View 3 Replies
View Related
Dec 9, 1999
Hi everyone,
I really need help on this, one of my databases is marked suspect. I did tried to execute this command below (scripts):
use master
go
sp_configure 'allow updates',1
go
reconfigure with override
go
update sysdatabases set status=4 where name='security'
go
sp_configure 'allow updates',0
go
reconfigure with override
go
and it release the suspect from the 'Security' database, but it Won't let me access the table,data or nothing. The worse thing is when I stop & start the server again, the database marked suspect again.
Could anybody out the help me on this. Thank in advance, Vu
View 1 Replies
View Related
Apr 8, 1999
I am using SQL server 6.5 sp3 and NT 4.0 sp4.
My SMS database has been marked suspect.
I do not have a backup.
I have read several articles about trying to us sp_resetstatus.
I can not find this sp on my server.
When I try the following:
UPDATE master..sysdatabases status=256 WHERE name = ('sms')
I get the following back:
Ad-hoc updates to system catalog not enabled. System Adminstrator must recongifure system to allow this.
I have searched Microsoft KB and everywhere I can think of. If anyone can help I would really appreciate it.
I even tried reapplying sp3 and rebooting...this did not help either.
Can someone please tell me how to change the status back to normal.....I think this is a it will take..
thanks in advance,
nathan
View 1 Replies
View Related
Mar 5, 1999
I have the original dat files ( 2 seperate log / data) of a database. I have created new devices (same size as originals) and a new database. I replace the new dat files with the originals and the database always comes up as a suspect. I have done this with the other 7 databases on my server and none have similar problems. This database was created different then others using new database and new devices routine rather than creating the devices first. Any Ideas?
Thanks in Advance.
View 1 Replies
View Related
Nov 18, 1998
Hi... I have this problem with my database (dunno how this thing happen). Today, 2 of my databases have been marked as 'suspect' (grey color in SQL Enterprise Manager). In ISQL, when I try 2 connect 2 the database (use), the message '
Msg 926, Level 14, State 1
Database 'MYUAT' cannot be opened - it has been marked SUSPECT by recovery. The SA can drop the database with DBCC.'
appeared.
Don't understand Y this occurred...
Thanks in advance for any help...
~Cheers~
View 1 Replies
View Related
Jun 15, 2004
my database is in suspect,how to correct it?
thx in adance..
View 2 Replies
View Related
Sep 9, 2004
Hi all,
We recently had some kind of error on one of the server's hard drives. The network guys, reinintialized (or something) and were able to bring everything back. However, two of my databases now is "Suspect" and can't be used. Both the MDF & LDF exist, and there are no indications of actual data loss. What can I do with a "suspect" database ? SQL 2K
What should I do to recover these two databases?
Thank you for all your suggestions.
View 2 Replies
View Related
Sep 29, 2004
I could not open my database.It says its Suspect and could not open and not displaying any of the objects
What should be the reason and what is steps i can do make it up and running.
Thanks
View 10 Replies
View Related
Oct 3, 2005
:mad:
One of my prodn databases went into suspect mode today..
I was able to recover it.
The tech support guyz had rebooted the server couple of times
(out of ignorance) cos they thought if wud fix it.
I lost the sql errpor log file which had the error details as to why db when into suspect....so my questions are..
1. Probable reasons why db when into suspect mode.
2. Any other way to find out about the error details.
3. When I ran dbcc checkdb with repair_rebuild option
for some tables it gave error
"Parent node for page (1:13075) was not encountered"
How can i resolve the consistency errors.
Is DBCC CHECKTABLE sufficient.???
View 12 Replies
View Related
Jan 5, 2004
We have an SQL Server 2000 DB server with several databases on it. Frequently, one of the DBs will have a state of "Suspect." This appears to occur after our 3rd party backup software runs a full backup on the weekends.
How can I begin to troubleshoot the cause of this issue? Has anyone seen anything like this?
thanks,
Jeff
View 5 Replies
View Related
Nov 1, 2005
Why do i keep getting this error ?
Mary Mary
Yes O !
View 3 Replies
View Related
Apr 12, 2007
Hi everyone,
I hope you could help me.
I have a database that was marked as suspect, i change is state but now i want to extract the information of the database and a couldn't because de database have several erros include 2 allocation erros.
How could i solve this problem? I don't have a recent database backup.
thanks to everyone.
Pedro Silva
View 7 Replies
View Related
Apr 16, 2007
Hi all,
I have a suspect database caused by a disk error on a Raid5 disk. I'm a bit of a novice on SQL and am using SQL 2005. I have tried the following and can't get the database status to reset which means the DBCC checkdb command does not run. The client I am fixing this for has no backup of the data at all.
USE master
GO
sp_configure 'allow updates', 1
GO
RECONFIGURE WITH OVERRIDE
GO
EXEC sp_resetstatus 'nhd2007';
GO
sp_configure 'allow updates', 0
GO
RECONFIGURE WITH OVERRIDE
GO
DBCC checkdb ('nhd2007',NOINDEX);
GO
I get the following error back:-
Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
The suspect flag on the database "nhd2007" is already reset.
Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
Msg 926, Level 14, State 1, Line 3
Database 'nhd2007' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
The error in the SQL Log which is causing all the problems is:-
Message
SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:3425329; actual 25600:1744858624). It occurred during a read of page (1:3425329) in database ID 24 at offset 0x00000688862000 in file 'E:hd2007hd2007.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Any advice on what I can do to get some access to the data would be great.
Thanks
View 9 Replies
View Related
May 9, 2007
Okay, so i have a tabase named "TEST" that i set up, everything in it is for a website i've been designing slowly for the last month, i come in today, and notice the database is marked suspect. look at the log and i see all of this:
Recovery of database 'Test' (7) is 20% complete (approximately 305 more seconds) (Phase 2 of 3).
ForwardLogBlockReadAheadAsync: Operating system error 23(Data error (cyclic redundancy check).) encountered.
Operating system error 23(Data error (cyclic redundancy check).) on device 'C:Program FilesMicrosoft SQL ServerMSSQLdataTest_Log.LDF' during ForwardLogBlockReadAheadAsync.
Error: 3313, Severity: 21, State: 2
Error while redoing logged operation in database 'Test'. Error at log record ID (8440:42526:1)..
Error: 3414, Severity: 21, State: 1
Database 'Test' (database ID 7) could not recover. Contact Technical Support..
Now, honestly, i could care less about the data, the thing the matters most to me, is the couple of stored procedures i've developed.
what can i do?
View 11 Replies
View Related
