Dataset Using Stored Proc With Multi Select Params
Aug 7, 2007
I have a stored proc that I'm using to run a report. It works fine, but currently I'm using a parameter that is a single selection from a dropdown. I'd like to use multi select, but have not been able to get it to work.
In the data tab I'm currently using "text" for command type and :
exec sp_executesql @sql, N'@p_OfferStatus VARCHAR(100)', @p_OfferStatus = @p_OfferStatus
when I run this in the data tab, it works fine, returning data, but when I try to preview it it tells me there are syntax errors. Anyone know the correct way to use multi selects with stored procs?
Code Block @LegalCounsel int = 0, @ClientID int = 0, @FundID int = 0
DECLARE @thisQuery as varchar(max)
SET @thisQuery = 'SELECT p.Portfolio, SeniorMgr, fl.Legal FROM FundClient f' BEGIN SET @thisQuery = @thisQuery + ' INNER JOIN FundPortfolio p ON p.ClientID = f.ClientID' END BEGIN SET @thisQuery = @thisQuery + ' LEFT OUTER JOIN Staff s ON (s.ClientID = p.ClientID AND s.FundID = p.PortfolioID AND s.ClientID = f.ClientID)' END BEGIN SET @thisQuery = @thisQuery + ' LEFT OUTER JOIN myLegal l ON (l.ClientID = p.ClientID AND l.FundID = p.PortfolioID) INNER JOIN FullLegalList fl ON fl.LegalID = l.LegalCounsel' END BEGIN IF @Legal != 0 SET @thisQuery3 = @thisQuery3 + ' WHERE rl.Legal = ' + cast(@LegalCounsel as varchar(11)) END BEGIN IF @ClientID != 0 SET @thisQuery = @thisQuery + ' AND p.ClientID = ' + cast(@ClientID as varchar(11)) END BEGIN IF @FundID != 0 SET @thisQuery = @thisQuery + ' AND p.PortfolioID = ' + cast(@FundID as varchar(11)) END BEGIN SET @thisQuery = @thisQuery + ';' END
I've created a sproc in SQL2000 that returns a dataset from a temp table & the number of records it's returning as an output parameter, although I can't seem to retrieve the value it's returning in asp.net although I get the dataset ok.
This is my sproc create procedure return_data_and_value @return int output as set nocount on ... ... select * from #Table select @return = count(*) from #Table drop table #Table go
This is asp.net code
Dim nRecords as Int32 Dim cmd As SqlCommand = New SqlCommand("return_data_and_value", conn) cmd.CommandType = CommandType.StoredProcedure
Dim prm As SqlParameter = New SqlParameter("@return", SqlDbType.Int) prm.Direction = ParameterDirection.Output cmd.Parameters.Add(prm)
Select hours from GetBaseStoredProc '10/01/2004' Where ReasonId = 1
where GetBaseStoredProc is a stored procedure that takes a date parameter and contains a select sql statement like: select reasonId, hours from my table where mydate = @myDate
(in reality, it's a much larger and more complicated statement, just using this as an example)
I guess I'm treating my storedProc like a view. If worse comes to worse, I suppose I could create a view (would rather not), but I'm wondering if what I want to do is possible, and I'm just not using the right syntax. Many thanks - (a former Oracle dev)
i have a vb app that is retriving data from an sql db using ado. i have a qry save in my db. i want to select from this qry where x in (1,2,3,4). i don't know how many values i will be putting into my where in statment. it could be one value or 100 values. below is my code. what i would like to do is pass one paramater to my stored proc and then break it up and use it in my select. my desired result is as follows
----------------------------------------------- declare cnt int declare TempFulLString nvarchar(5000) declare TempStyleFID int
TempFulLString = @str_TempString
select * from QryPicking_Slip_Fill_Listview1 where stylefid in (
I'm trying to call a stored proc with parameters without using EXEC statement and with only using a SELECT statement. I have the stored proc and need to call it from a 3rd party application which provides an interface to SQL server and does not support EXEC statements, but only SELECT statements. Is there a way this can be done?
Hey, I create a Select Statement in stored proc and I have printed the variable and it has the correct Select statement. My problem is now that I have the string I want how do I run it. Thanks
Hi, i'm an SQL newbie. I'm trying to figure out if there's an easy way to take a single field record set from a SELECT statement and then do an INSERT using that record set, all in one single Stored Procedure.
Here's what i tried to do, but this returns an error "The name "phonenumber" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.".
The common field in both SELECT and INSERT is phonenumber.
quote:PROCEDURE [dbo].[usp_select_and_insert]
@name varchar(20),
AS
SELECT phonenumber FROM USERLIST where OWNERNAME LIKE @name INSERT INTO LOGLOG (destination,content) values(phonenumber,'hello world');
GO
Hope that one of you can be kind enough to give me some guidance. Appreciate in advance. :)
I have a SP that return a dataset and I was thinking to execute that SP inside of other SP then catch the dataset to put into a variable or put into a temp table. What I know is you can not use recordset on output and input parameter in SP correct me if im wrong. I'm just wondering if I there is a work around in this scenario.
I have 4 sets of select queries under 1 stored proc, now on the report calling the stored proc via dataset. when i run the dataset the only first set of the select query related fields appearing under the dataset.
But on the back end sql server, if i execute the same stored proc, i get 4 resultsets in one single executioln.
i am not seeing the remaingin 3 resultsets, on the reports dataset.
Is it possible on the reports or not.
In the asp.net project i was able to use that kind of stored procedures whcih has multiple select statements in 1 procedure., i use to refer 0,1,2,3 tables under a dataset.
There is a stored-procedure that it has multiple select statements as returned result set. How can I use SqlCommand.ExecuteReader to get all result set?
What if the multiple select statements is " FOR XML", how can I set all xml using ExecuteXmlReader?
I tried to use ExecuteReader or ExecuteXmlReader, but seems that I can only get back the result set of the first select statement, all others are messed up.
stored procedure example: NorthWind database:
SET QUOTED_IDENTIFIER ON GO SET ANSI_NULLS ON GO
Create PROCEDURE dbo.getShippersAndEmployeesXML AS
select * from Shippers for xml auto, elements select * from Employees for xml auto, elements
RETURN @@ERROR
GO SET QUOTED_IDENTIFIER OFF GO SET ANSI_NULLS ON GO
I have a set of reports that run just fine with the default parameters (Country = US). The report returns data within 60 seconds. However, if I change the default parameters, say to Country = UK, the report will run and won't seem to stop. The user will be prompted every few minutes to relogin to the domain (which they are not prompted when they first run the report). On the server, the report is taking up 1 of the four CPU's and is using a huge amount of disk paging.
Here's the kicker. If I go in, change the default parameters to Country = UK and deploy the report, it will run in 60 seconds with the new default parameters. Now I try to run the report by changing the country = US and it locks up when it is executed.
Using SQL Server 7 I am trying to modify an existing stored proc and make it more flexible. The below example represents the first part of that proc. The temp table that it should return is then used by another part of the proc (this query represents the foundation of my procedure). I need to figure a way to change the SQL Select statement, choosing between C.CONTRACTCODE and CB.EMPLOYERCODE on the fly. The query below will run but no records are returned. I am starting to believe/understand that I may not be able to use the @option variable the way I am currently.
I've tried creating two SQL statements, assigning them as strings to the @option variable, and using EXEC(@option). The only problem with this is that my temp table (#savingsdata1) goes out of scope as soon as the EXEC command is complete (which means I can not utilize the results for the rest of the procedure). Does anyone know how I can modify my procedure and incorporate the flexibility I've described?
Thanks,
Oliver
CREATE PROCEDURE test @ContractCode varchar(10), @dtFrom datetime, @dtTo datetime, @Umbrella int
AS
declare @option varchar(900)
if @umbrella = 0 set @option = 'c.contractcode' else set @option = 'cb.employercode'
select c.claimsno, c.attenddoctor, c.patientcode, p.sex, cb.employercode into #SavingsData1 from claimsa c inner join Patient p on c.patientcode = p.patientcode inner join claimsb cb on c.claimsno = cb.claimno where @option = @ContractCode and c.dateentered between @dtFrom and @dtTo and c.claimsno like 'P%' and p.sex in('M','F') and c.attenddoctor <> 'ZZZZ'
If I run this statement in Query Analyzer, it properly returns 1for my testing table. But if I put the statement into a storedprocedure, the stored procedure returns NULL. What am I doingwrong? I suspect it may be related to how I defined the parametersfor the stored procedure. Perhaps my definition of TableName andColumnName don't match what COLUMNPROPERTY and OBJECT_ID expect toreceive, but I don't know where to look for the function declarationsfor those. Any pointers would be appreciated.Select statement:SELECT COLUMNPROPERTY(OBJECT_ID('Table1'), 'TestID', 'IsIdentity') ASIsIdentityTable definition:CREATE TABLE [dbo].[Table1] ([TestID] [numeric](18, 0) IDENTITY (1, 1) NOT NULL ,[Description] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]Stored Procedure definition:CREATE PROCEDURE spTest(@TableName varchar,@ColumnName varchar)AS SELECT COLUMNPROPERTY(OBJECT_ID(@TableName), @ColumnName,'IsIdentity') AS IsIdentity
HiI'm not sure what the best approach for this is:I have a stored procedure which I would like to use to return severaloutput values instead of returning a recordset.CREATE PROCEDURE Test (@param1 int, @param2 int OUTPUT, @param3 intOUTPUT) ASSELECT field2, field3 FROM Table WHERE field1 = @param1I would like to return @param2 as field2 and @param3 as field3How do I do this without using SELECT multiple times?THanks in advanceSam
I have 3 paramaters@value1, @value2,@value3 being passed into a stored proc and each of these parameters can be blank. If one of them is blank and the rest of them have some valid values, then I should just exclude the column check for the value that is blank.
For e.g if all my parameters being passed are non- empty then I would do this select * from tblName where column1 like @value1 and column2 like @value2 and column3 like @value3
else if I have one of the parameter being passed as empty, I should ignore that parameter like if@value1 is empty then my sql should be
select * from tblName where column2 like @value2 and column3 like @value3
I don't want to do a dyanmic sql because of rights and security issue. I want it through a stored procedure only.
Also, all the three columns can have null values in the table. Please let me know what is the best possible way to do this. Thanks in advance !.
I have used several sql queris to generate a report. This queries pull out data from different tables. But sometimes at the same table too. Basically those are SELECT statements. I have created stored proc for each SELECT statement. now I'm wondering can I include all SELECT statements in one stored proc and run the report. If possible, can anyone show me the format?
Finally found what is causing my .net c# service application to return with Error 18456 (NT Authority/anonymous logon" severity 14 State 11.
It is connecting to a sql server db in another machine and running a stored procedure in that db. I found out that if I remove that two statements that create temp tables (with select INTO), the stored procedure executes without a problem.
Note that this stored procedure updates the tables does not have problems updated tables that are in the DB. I gets upset when creating temp tables though.
I cannot do away with those temp tables as they are needed in the calculation. How can I fix this problem?
Why would creating temp tables remotely cause this error? What am I missing in my set up. My service application connects with the integrated security = true. My service process installer has the account set to "User". What am I missing.
I am learing VWD as I build a site and while I can use the various controls (GridView, FormView) to set up operations and retrieve/display database information, I need to be able to codebehind to do SQL operations for retrieving data to fill paper forms and to modify the database. After I retrieve data from the database, I need to do a lot of computation befor I build a paper quote that is emailed to a customer. I have written a subroutine to which I pass my sql query statement and I can add a new entry and edit an existing entry. The problem is a simple query to read an existing database entry. If I write a simple command : Cmd = SELECT PartNumber, PartName, PartsAvailable FROM Inventory WHERE PartNumber = "P7226" , the command is executed but the return data falls on the floor somewhere as I dont know how to code to put the results in an array or in fact, have any idea on how to find the returned data. Can anyone help with this simple(?) problem? My sub that handles the sql command is shown below. I have also been looking for the way to code in VB to cause existing controls like GridViews to access, edit, and insert but I havent been able to find a paper or tutorial. If anyone has seen this information, it would be helpful also.Protected Sub CallSQL(ByVal Cmd As String) Dim conn As New SqlConnection("Data Source=.SQLExpress;AttachDbFileName=C:Documents and SettingsaMy DocumentsVisual Studio 2005WebSitesWebSite5App_DataPINEMgt.mdf; Integrated Security=True;Connect Timeout=30;User Instance=True") 'Data Source=.SQLEXPRESS;AttachDbFilename="C:Documents and SettingsaMy DocumentsVisual Studio 2005WebSitesWebSite5App_DataPINEMgt.mdf";Integrated Security=True;Connect Timeout=30;User Instance=True)Dim sql As String = String.Empty sql = Cmd 'Open the connection to the database and execute he SQL conn.Open()Dim command As New SqlCommand(sql, conn) command.ExecuteNonQuery() conn.Close() End Sub
I am new to web services and as a DBA I only have limited .net experience. Our development team is creating a web services interface for our new IVR phone system, and we've decided on a solution that will send each of the phone call parameters from our database to the phone system in an XML based on line number and extension. I've found that Http Endpoints in sql server will be a perfect solution for exactly that and I won't need any .net to develop it. Thats the good news. There are, however, other requirements for our phone system to communicate back to our database. All of the examples I've seen for endpoints use a stored procedure performing a select statement.
Is it possible to create an endpoint that references a stored procedure performing an insert or update? To be more specific, can I create an endpoint that references a stored procedure that has parameters? If so, how do I pass those parameters through a web service request? Is it as simple as adding &variable="value" to the url?
If so I could develop this entire solution from the database side and not involve our .net programmer!
Another alternative: the phone system does have it own database in sql server. I'm not sure if our phone system provided can or will do this, but if they are willing to work with this, maybe a service broker can fit into this solution.
As far as i can tell, you cannot pass an array (or structured) parameter to a stored procedure...
Ok, this means when you have to store data for an item and its sub-items (e.g. a product and its - say- version specific infos) you cannot code all the logic into a single procedure. You need to code it into your DAL, where you first insert then loop to sub-insert...
Is this correct? Is there any other way to approach the problem?
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code. So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message: Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages. (1 row(s) affected) (1 row(s) affected) I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution? Also, Is there a way to trace into a stored procedure through Query Analyzer? -------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised: SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
Hi all!Running the code below in SQL-analyzeer (or through dbExpress) results in NULL.As one might guess I would like the result to be 1. What is wrong? I.e, whywont the result of the SP come back to the caller?CREATE PROCEDURE test@val INTEGER OUTASSELECT @val = 1GODECLARE @val INTEGEREXEC test @valSELECT @val
Hi all,I'd like to put together a SQL statement that will take the name of astored procedure as a param, and return that SP's parameters.I'm writing a test application, and I'd like to wrte a generator tosave myself some time, but I can't seem to figure out how to get theparams from a SP. Any help would be appreciated.Thanks in advance,Craig
I need to write a query in which some of the columns will be derived from a dataset (join) and the other columns will be derived from another dataset. Is there a way to do this?
Hello,I am trying to construct a query across 5 tables but primarily 3tables. Plan, Provider, ProviderLocation are the three primary tablesthe other tables are lookup tables for values the other tables.PlanID is the primary in Plan andPlanProviderProviderLocationLookups---------------------------------------------PlanIDProviderIDProviderIDLookupTypePlanNamePlanIDProviderStatusLookupKeyRegionIDLastName...LookupValue....FirstName...Given a PlanID I want all the Providers with a ProviderStatus = 0I can get the query to work just fine if there are records but what Iwant is if there are no records then I at least want one record withthe Plan information. Here is a sample of the Query:SELECT pln.PlanName, pln.PlanID, l3.LookupValue as Region,p.ProviderID, p.SSNEIN, pl.DisplayLocationOnPCP,pl.NoDisplayDate, pl.ProviderStatus, pl.InvalidDate,l1.LookupValue as ReasonMain, l2.LookupValue as ReasonSub,pl.InvalidDataFROM Plans plnINNER JOIN Lookups l3 ON l3.LookupType = 'REGN'AND pln.RegionID = l3.Lookupkeyleft outer JOIN Provider p ON pln.PlanID = p.PlanIDleft outer JOIN ProviderLocation pl ON p.ProviderID = pl.ProviderIDleft outer JOIN Lookups l1 ON l1.LookupType = 'PLRM'AND pl.ReasonMain = l1.LookupKeyleft outer JOIN Lookups l2 ON l2.LookupType = 'PLX1'AND pl.ReasonSub = l2.LookupkeyWHERE pln.PlanID = '123456789' AND pl.ProviderStatus = 0ORDER BY p.PlanID, p.ProviderID, pl.SiteLocationNumI know the problew the ProviderStatus on the Where clause is keepingany records from being returned but I'm not good enough at this toanother select.Can anybody give me some suggestions?ThanksDavid
