Hi,
I have two tables in one table's field I have the datatype bit and null.
In 2nd table's I have the datatype varchar 10.
Now I want to Select the value of 2nd table in my Controle that is Dropdown and insert this value in the 1st table like bit. as this possible.
Thanks for helping.
Navi
Hello,
What is the Datatype for NULL ? How SQL Server stores NULL ? I have seen many discussions on this. Some say's that NULL will be considered as character type, then what about NULL value comes in a number column ?
Another article say's NULL is untyped. It don't have any type. Which one is correct ? Will there any difference for NULL in SQL Server and Oracle ?
Any help would be appreaciated
I'm getting a datatype error: "Application uses a value of the wrong type for the current operation" when executing the following stored procedure:
CREATE PROCEDURE dbo.Insert_Temp_ContactInfo
@sessionid varchar(50),
@FirstName varchar(50) = NULL,
@LastName varchar(50) = NULL,
@SchoolName varchar(50) = NULL,
@address varchar(50) = NULL,
@City varchar(50) = NULL,
@State int = NULL,
@Zip varchar(5) = NULL,
@Phone varchar(10) = NULL,
@Email varchar(50) = NULL,
@CurrentCustomer varchar(3) = NULL,
@ImplementationType int = NULL,
@ProductType int = NULL,
@Comment varchar(500) = NULL
AS
--check if a current record exists
SET NOCOUNT ON
begin
UPDATE dbo.Temp_ContactInfo
SET
FirstName = @FirstName,
LastName = @LastName,
SchoolName = @SchoolName,
Address = @address,
City = @City,
State = @State,
Zip = @Zip,
Phone = @Phone,
Email = @Email,
CurrentCustomer = @CurrentCustomer,
ImplementationType = @ImplementationType,
ProductType = @ProductType,
Comment = @Comment
WHERE
sessionid = @sessionid
If @@Rowcount = 0
INSERT INTO dbo.Temp_ContactInfo
(sessionid,
FirstName,
LastName,
SchoolName,
address,
City,
State,
Zip,
Phone,
Email,
CurrentCustomer,
ImplementationType,
ProductType,
Comment)
VALUES
(@sessionid,
@FirstName,
@LastName,
@SchoolName,
@address,
@City,
@State,
@Zip,
@Phone,
@Email,
@CurrentCustomer,
@ImplementationType,
@ProductType,
@Comment)
end
GO
This is code I'm using to call the procedure:
set InsertTempInfo = Server.CreateObject("ADODB.Command")
With InsertTempInfo
.ActiveConnection = MM_DBConn_STRING
.CommandText = "dbo.Insert_Temp_ContactInfo"
.CommandType = 4
.CommandTimeout = 0
.Prepared = true
.Parameters.Append .CreateParameter("@sessionid", 200, 1,50, usrid)
.Parameters.Append .CreateParameter("@FirstName", 200, 1,50,fname)
.Parameters.Append .CreateParameter("@LastName", 200, 1,50,lname)
.Parameters.Append .CreateParameter("@SchoolName", 200, 1,50,schoolname)
.Parameters.Append .CreateParameter("@address", 200, 1,50,address)
.Parameters.Append .CreateParameter("@City", 200, 1,50,city)
.Parameters.Append .CreateParameter("@State", 3, 1,4,state)
.Parameters.Append .CreateParameter("@Zip", 200, 1,5,zip)
.Parameters.Append .CreateParameter("@Phone", 200, 1,10,phone)
.Parameters.Append .CreateParameter("@Email", 200, 1,50,email)
.Parameters.Append .CreateParameter("@CurrentCustomer", 200, 1,3,currentcustomer)
.Parameters.Append .CreateParameter("@ImplementationType", 3, 1,4,implementationtype)
.Parameters.Append .CreateParameter("@ProductType", 3, 1,4,producttype)
.Parameters.Append .CreateParameter("@Comment", 200, 1,500,comment)
.Execute()
End With
Set InsertTempInfo = Nothing
the error is thrown on the following line:
.Parameters.Append .CreateParameter("@State", 3, 1,4,state)
I'm using a table to hold data that I can pass back to the original form page and re-populate the fields that were not validated correctly. The stored procedure either inserts or updates the record in the temp table I've created.
So, currently, as I'm testing, I'm just passing empty values to all the parameters and the @state parameter is failing and throwing the error.
I've double checked that the table has the state column set to integer datatype
The column is set as follows:
Name datatype length Allow Nulls
----------------------------------------------
State int 4 checked
I have tried setting the default value for every column to Null in the table and then also not using a default value. Either way, I still recieve the same error?
Not sure what else to look at?
It seems the problem might be that instead of a null value being passed to the parameter that it is actually empty. Can passing an empty value to a column of datatype integer cause this problem? If so, is there a way to correct it?
Thanks for any help.
i have a little confusion...
DECLARE @name varchar(30)
SET @name = NULL
SELECT ISNULL(CONVERT(DATE,@name),'')
Result: 1900-01-01
But..
DECLARE @name varchar(30)
SET @name = NULL
SELECT ISNULL(@name,'')
Does NULL inherit a datatype after convert?
1) it is in the same filegroup as the rest of the table?
2) it is stored in a filegroup separately from the rest of the table (I think this is allowed)?
how do i insert null value to a column with 'int' datatype. This columnn is primary key. Please help.
Akhil
I am trying to change a column from a decimal(18,2) to a decimal(18,3). What is the SQL command to alter this table?
SQL Command:
alter table TableName
alter column ColumnName decimal(18,3) [null]
the above command is right ?
Hi,
I am facing problem while inserting a Null value into a smalldatetime datatype field in sql server 2000 using code in vb 6.0
Error as : Type mismatch.
Kindly let me know how to insert Null or blank (dtDate = "") into a column.
Regards,
Srinivas Alwala
Ok I have upgraded my works database from a poorly designed Access database to a SQL database. The previous system allowed NULL values and duplicates to be inserted into a field that should NOT ALLOW NULL Values or duplicates. Therefore, this issue has now been moved across to my new system as I cannot set these constraints on the field that has multiple NULL values.
My solution would be to use a sequential operator, so whatever = NULL would be changed to a sequential number that us as administrators would know was a bogus number starting at something like = 999999900 counting up from that. There are only 250 records that would require updating.
To make things more interesting this field is not a integer type, its a Nvarchar type as its a Hardware ID. Both numerical and characters are require.
In the below scenario we are inserting some time related fields in Temp table.But its data type is varchar. Once data loading is finished in the temp table (Data is loading by source team SQOOP and they are unable to load if the source datatype is having Date or datetime) we have to alter the column datatypes. somehow, some character data in inserted in date columns (look at into 3rd insert statement). while altering the table it is failing. Can we do any alternative for this (Means if any varchar data that is non convertible to date can we make as null)
INSERT INTO ##TEMP_TEST
SELECT '2014-09-30','2017-10-06','Nov 6 2014 6:11AM','Nov 6 2014 6:11AM'
UNION SELECT '2014-09-29','2017-10-06','Nov 6 2014 6:11AM','Nov 6 2014 6:11AM'
UNION SELECT '2014-09-28','2017-10-06','Nov 6 2014 6:11AM','Nov 6 2014 6:11AM'
GO
INSERT INTO ##TEMP_TEST SELECT NULL,NULL,NULL,NULL
[Code] ....
Need to know if the varchar datatype field will ingore leading zeros when compared with numeric datatype ?
create table #temp
(
code varchar(4) null,
id int not null
)
insert into #temp
[Code] .....
Good afternoon,
I have an issue with an ssis variable datatype.
The scenario is as follows:
I have a stored procedure:
PROCEDURE [dbo].[sp_newTransaction]
@sourceSystem varchar(50),
@txOut NUMERIC(18,0) OUTPUT
AS
insert into scn_transaction (sourceSystemName) values(@sourceSystem);
SELECT @txOut = @@identity
Whose purpose is to perform an insert into a table and return me the identity value of the inserted record, which I'll then use throughout the rest of my package. The identity column in the inserted table is numeric(18,0).
I execute the stored proc with the following sql with an OLE DB connection manager:
exec sp_newTransaction ?, ?
The first parameter is a string variable from earlier in the package, and the second is the output parameter. I have the following parameter mappings to the execute sql task:
User:ystxId output numeric 1 -1
User:ourceSys input varchar 0 -1
The proc is correctly called, and the row insesrted, however I get a type conversion error when SSIS attempts to map the return parameter to my package variable... I've tried all sorts of combonations, and can't seem to get it to execute.
At one point I wasn't returning a numeric, but rather an int from the stored proc, and all was well until I went to use the variable in a derived column later in the package, and the type was converted quite incorrectly (a 1 was 77799789080 or some such), indicating a type conversion error likely related to the encoding of the number.
I'd like to keep the datatypes as numeric and make ssis use those - any pointers are greatly appreciated as to what type my package variable should be to allow proper assignment of a sql server numeric type to it.
Thanks much,
B
Hey. I need to substitute a value from a table if the input var is null. This is fine if the value coming from table is not null. But, it the table value is also null, it doesn't work. The problem I'm getting is in the isnull line which is in Dark green color because @inFileVersion is set to null explicitly and when the isnull function evaluates, value returned from DR.FileVersion is also null which is correct. I want the null=null to return true which is why i set ansi_nulls off. But it doesn't return anything. And the select statement should return something but in my case it returns null. If I comment the isnull statements in the where clause, everything works fine. Please tell me what am I doing wrong. Is it possible to do this without setting the ansi_nulls to off??? Thank you
set ansi_nulls off
go
declare
@inFileName VARCHAR (100),
@inFileSize INT,
@Id int,
@inlanguageid INT,
@inFileVersion VARCHAR (100),
@ExeState int
set @inFileName = 'A0006337.EXE'
set @inFileSize = 28796
set @Id= 1
set @inlanguageid =null
set @inFileVersion =NULL
set @ExeState =0
select Dr.StateID from table1 dR
where
DR.[FileName] = @inFileName
AND DR.FileSize =@inFileSize
AND DR.FileVersion = isnull(@inFileVersion,DR.FileVersion)
AND DR.languageid = isnull(@inlanguageid,null)
AND DR.[ID]= @ID
)
go
set ansi_nulls on
Database is SQL Server 2000
I have a field in a table that stores date of birth. The field's datatype is char(6) and looks like this: 091703 (mmddyy). I want to convert this value to a datetime datatype.
What is the syntax to convert char(6) to datetime?
Thank you in advance.
Hi,
I imported a table from Accees to SQL 7 with data in it.
I need to modify one of the datatype columns to "datetime" from nvarchar.
I tried to convert it manually, in SQL Server Enterprise Manager tool, but it gave me an error.
I also tried, creating another column "DATE2-datatype:datetime" and updating the column with the old one.
UPDATE users SET DATE2 = DATE.. But it also faild,..
How can I modify the column?
Thank you.
HI,I have a table with IDENTITY column with the datatype as INTEGER. Nowthis table record count is almost reaching its limt. that is totalrecord count is almost near to 2^31-1. It will reach the limit with inanother one or two months.In order to avoid the arithmentic overflow error 8115, we would likechange the datatype from INT to BIGINT. we hope this will solve ourproblem.How do I approch this datatype conversion?. Since the data count ishuge, that leads to a long down time of database.we need better approach or solution for this problem?. kindly give mea better solution that will reduce the total downtime of the productiondatabase.?.Regards
View 1 Replies View Related
Hi guys..
i have so doubts in my mind and that i want to discuss with you guys... Can i use more then 5/6 fields in a table with datatype of Text as u know Text can store maximu data... ? acutally i am trying to store a very long strings values into the all fields. it's just popup into my mind that might be table structer would not able to store that my amount of data when u use more then 5/6 text datatypes...
and another thing... is which one is better to use as data type "Text" or "varchar(max)"... ?
if any article to read more about these thing,, can you refere to me...
Thanks and looking forward.-MALIK
In my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.
when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL.
Is it possible through SSRS designer?
I have a flat file with the following columns
SampleID Rep_Number Product Protein Fat Solids
In the flat file SampleID and Product are populated in the first row only, rest of the rows only have values for Rep_Number, Protein, Fat, Solids.
SampleID and Product are blank for the rest of the rows. So my task is to fill those blank rows with the first row that has the sampleID and Product and load into the table.
I have a report that is run on a monthly basis with a default date of null. The stored procedure determines the month-end date that it should use should it be sent a null date.
The report works fine when I tell it to create a history entry; however, when I try to add a subscription it doesn't appear to like the null parameter value. Since I have told the report to have a default value of null it doesn't allow me to enter a value on the subscription page.
Now, I suppose I could remove the parameter altogether from the stored proc, but then the users would never be able to run the report for a previous time period. Can someone explain to me why default values aren't allowed to be used on subscriptions when they seem to work fine for ad hoc and scheduled reports? This is really quite frustrating as most of my reports require a date value and default to null so that the user doesn't have to enter them for the latest data.
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Key cannot be null. Parameter name: key
I run a stored procedure for which I have a return variable. The stored procedure returns the ID of a row in a table if it exists:
m_sqlCmd.ExecuteScalar();
The m_sqlCmd has been fed an SQLParameter with direction set to output.
When the stored proc returns, I want to test it. Now when there IS a row it returns the ID ok.
When the row doesn't exist, in my watch I have:
m_sqlParam.SqlValue with value {Null}
I can't seem to work out how to test this value out.
I've tried several things but none seem to work.
This line compiles ok, but the following runs into the IF statement as if the SqlValue is null??
if (m_sqlParam.SqlValue != null)....
{
// I'm here!! I thought the watch says this is null???
}
Sorry if this is obvious, but I can't work this one out!!
Looks like there was a fix and then I read this fix is not a fix. Does anyone know how this can be rectified? Does it mean that only Windows authentiation is the only way it works. The Software is over 2 years old, there are no excuses.
I am getting this error: "Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails." -- But my value is not null. I did a response.write on it and it show the value. Of course, it would be nice if I could do a breakpoint but that doesn't seem to be working. I'll attach a couple of images below of my code, the error, and the breakpoint error.
Server Error in '/' Application.
Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.Source Error:
Line 89: sContact.Phone = sPhone.Text.Trim
Line 90: sContact.Email = sEmail.Text.Trim
Line 91: sContact.Save()
Line 92:
Line 93: Dim bContact As Contact = New Contact()Source File: F:InetpubwwwrootOutman KnifeCheckout.aspx.vb Line: 91 Stack Trace:
[SqlException (0x80131904): Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857354
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734966
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlDataReader.HasMoreRows() +150
System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) +214
System.Data.SqlClient.SqlDataReader.Read() +9
System.Data.SqlClient.SqlCommand.CompleteExecuteScalar(SqlDataReader ds, Boolean returnSqlValue) +39
System.Data.SqlClient.SqlCommand.ExecuteScalar() +148
SubSonic.SqlDataProvider.ExecuteScalar(QueryCommand qry) +209
SubSonic.DataService.ExecuteScalar(QueryCommand cmd) +37
SubSonic.ActiveRecord`1.Save(String userName) +120
SubSonic.ActiveRecord`1.Save() +31
Checkout.btnCheckout_Click(Object sender, EventArgs e) in F:InetpubwwwrootOutman KnifeCheckout.aspx.vb:91
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
I would drop and add the table but the data can't be deleted. So if anyone could help with the statement it would be greatly appreciated. Thanks
View 7 Replies View RelatedI'm trying to set the concat... option to OFF
all the time and in all my databases
I tried this command
USE master
EXEC sp_dboption 'DatabaseName', 'concat null yields null', 'FALSE'
but it doesn't change anything
Select NULL + 'TOTO'
----> NULL
(it should be 'TOTO')
hi,my structure table in database:Amount float(53) not null default 0when i try to run his script:alter table ABC alter column Amount float(53) nullit can only set the Amount to allow null, but can't set the defaultvalue to empty.anyone know how to set the field to allow null and default set toempty, no value.thanks
View 5 Replies View RelatedIt's giving me an error while I'm trying to change column value from not null to null..
'tblid' table
- Unable to modify table.
Cannot insert the value NULL into column 'ValidID', table 'Xe01.dbo.Tmp_tblid'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Hello.
I've built a sample CLR function with the following declaration....
CREATE FUNCTION GetManager(@DeptCode nvarchar(3))
RETURNS nvarchar(1000)
WITH RETURNS NULL ON NULL INPUT
AS
EXTERNAL NAME Assembly1.[ClassLibrary1.MyVBClass].MyManager
And it works as expected, except when I use NULL:
DECLARE @MyManager nvarchar(1000)
EXEC @MyManager = dbo.GetManager NULL
PRINT @MyManager
It returns the value "Unknown" as it would have for any unknown DeptCode, as-programmed.
I'm of the theory it should have returned NULL without actually firing the function? Or is this only for non-CLR items... or stored procedures, not functions?
We have a case where in we should show date based on conditions for e.g if we had a column defined as
col varchar(10) then we would show col as 'NULL' for some condition and actual value when no condition
Normaly date values are stored here e.g under col 20150901 .
Case
when col>'20150901' then 'NULL'
else col
end as Derivedcol
Note this is an extract process and we are presenting data by pumping the data in a table .
Now there is another similar column -colz varchar(10) which stores date but doesnt have case condition so whenever date has no value its shows null which is database null.
So whats the difference between database null and string null ?
How can we show database null for the case condition instead of string "null"?
I have two columns A (which allows nulls) and B( which does not allow nulls).
How can I add the contents of columns A and B SO THAT I DO NOT GET A NULL RESULT WHEN A IS NULL.
The result of A+B concatanation will be stored in a column, C.
Appreciate your help
Ziggy
Hi guys,
I've got a query on a particular table returning an odd result:
SELECT DISTINCT WorkStation
FROM Invoice
WHERE WorkStation Is Not Null
ORDER BY WorkStation
This query returns the rows I'd expect plus a null row. This doesn't happen in databases at other sites, or in other tables at this site. The following query behaves as I'd expect returning only non-null AccountNumbers.
SELECT DISTINCT AccountNumber
FROM Suppliers
WHERE AccountNumber Is Not Null
ORDER BY AccountNumber
I can't reproduce these results on another site on a table of the same structure, or on another table at this site.
Any suggestions as to what might be going on?
Pertinent info:
---
select @@Version
Microsoft SQL Server 2000 - 8.00.760 (Intel X86)
Dec 17 2002 14:22:05 Copyright (c) 1988-2003 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
---
dbcc checkdb
Abridged result:
CHECKDB found 0 allocation errors and 0 consistency errors in database 'POS'.
---
SELECT * INTO #Inv FROM Invoice
SELECT DISTINCT WorkStation
FROM #Inv
WHERE WorkStation Is Not Null
ORDER BY WorkStation
Does not reproduce this problem (and so is a probable fix) but the questions remains, what causes this?
TIA,
Karl.
I have 595 default constraints in my database. I can return a list of them using the following:
select * from sys.default_constraints
Is there a way I can return a list of just the ones where NULL is still allowed? I want to update all of the columns with a default value to not allow NULLs.
Dear folks,
please tell me the query for altering a column from not null to null
Vinod