feel like a dafty asking this one but can anyone tell me the proper syntax for checking if a date being inserted is greater than today ?
I have tried [datetobechecked] >= getdate()
without success in the expression editor
thanks
I have a column say 'ActivationDate' which is a (database timestamp [DT_DBTIMESTAMP]) which I want to replace with an expression in derived columns
The condition is if 'ActivationDate' field is null or '' then 'Null' else 'ActivationDate'
I am struggling to write this condition. Without condition i.e. at present it saves the value in this database '1753-01-01 00:00:00.000'.
In the preview the 'ActivationDate'field does not show any thing so I recon it is either null or ''
I'm using SQL 2000 Enterprise Manager Diagram Check Constrains dialog ???????
How do I CHECK Expression so that cust_zip data is:
- all numbers
- 5<=length<=10
Thanks for any help...
Hi all,
I wrote the expression below in a table's check constraint
(CustomerTypeID = 0 and ContentSiteID is null and ResellerID is null and AffiliateID is null and WhiteLabeLID is null ) or
( CustomerTypeID = 1 and ContentSiteID is not null and ResellerID is null and AffiliateID is null and WhiteLabeLID is null )
It saved it ok, but when I re-opened and viewed the expression again it was converted to:
([CustomerTypeID] = 0 and [ContentSiteID] is null and [ResellerID] is null and [AffiliateID] is null and [WhiteLabeLID] is null
[CustomerTypeID] = 1 and [ContentSiteID] is not null and [ResellerID] is null and [AffiliateID] is null and [WhiteLabeLID] is null )
This is a different logic because the OR is not prioritised above the AND.
Any solution or should I move my condition to the table's Update and Insert triggers?
Thanks!
Ofer
How do you Write an expression to Return the date value based on the most recent date only?
Eg. Date 10-7-2015, action - done, notes - all items fixed.
      Date 4-5-2016, action - not yet done, notes - buying parts
All these dates are returned based on a search parameter based on a project number. I only want the most current date and associated fields displayed.
Is it possible to use a IIF IsNothing expression and check another condition? For all the values that are blank, I want it to check another column if  "Disposition" = 2 then I want to show "Inactive"
=iif(isnothing(Fields!Value)," ","MS " & Fields!Value)
Hi, ppleI am trying to check dates. I tried something like this but it doesn't work.
Dim strarray As Array
Try
Dim my As New Database
my.OpenConn()
Dim d As SqlDataReader
Dim dr2 As SqlDataReader
d = my.ExecuteQuery("Select lastLogin, ID from Student")
While d.Read
Dim ld As DateTime = d("lastLogin")
If ld > FormatDateTime(Now) Then
strarray() = strarray() + d("ID")
End If
End While
d.Close()
dr2 = my.ExecuteQuery("Insert into Audit (auditID, ID, auditMsg, updatedDate) values ('200','20','" & strarray() & "','" & FormatDateTime(Now) & "');")
dr2.Close()
my.CloseConn()
Catch x As Exception
Debug.WriteLine(x)
End Try
Hi all,
I would like to generate a file name according to the current date, like 20070716.TXT. In expression, the function Month(Getdate()) will return 7 instead of 07.
How can i do it.
TIA
Patrick
I have been looking all over for some info about other people having this problem, but haven't found anything.
I have a package that needs to download a dated file from an ftp site. I am using a couple script objects to set variables, and one of them is the filename based on the date. I use an expression to get the date:
@[User::varFileName] = (DT_WSTR,4) Year( GetDate()) + (DT_WSTR,2) Month( GetDate()) + Substring((DT_WSTR, 29) GETDATE(), 9, 2)
Everything works really well when I am debugging it locally. However once it is on the server or even once I come back to it in a day or two, I am still seeing the old date. I thought it might be because my variable needed to be set to evaluateexpression = true, however once I did this it hung me and prevented me from debugging and I had to end bus dev studio. Not sure if its because it is being evaluated in two places (as a global and then in a script) but when I took it out of my script it hung again. Its strange in order to get it to work when I am debugging it locally I have to go to each process and evaluate the expressions in there, then it seems to work. thanks!
What is the correct code for an expression where my "datetime" field is greater then or equal to 3 months ago?
View 1 Replies View RelatedHi All,
Can anyone advise me if I can enter an expression into the format property of a field, so the date is displayed as dd/mm/yyyy ?
It is currently mm/dd/yyyy hh:mm:ss
I have been trying with convert and FormatDateTime, but can't seem to get this to work in the Report layout editor. I would like to know how to do it here, rather than changing my query.
Thanks in advance
Humate
I am working on a ssis package ,where I have date parameters as format below
"2015-09-01-00.00.00.000000"
How to get this date format in TSQl expression in SSIS package?
Help,
I have a package that maps the current getdate to a variable.
I then want to be able to write that variable back to a table using a sql task using the following expression:
"INSERT INTO CONTROL_BATCH_HEADER VALUES (
" + (DT_STR, 10, 1252) @[Control::intAdtBatchId] + ",
'" + @[Control::strSubjectArea] + "',
convert(datetime, '" + (DT_STR, 30, 1252) @[Control::dteRunDate] + "',131))"
The problem is the date is being written back in the wrong format. I've tried changing the mask to 121 but the month is being written as the day.
Help, how can I make this work regardless of the locals. In oracle I would just put a to_char(date,'dd-mm-yyyy') but not sure what to do here.
Thanks for your help
Stapsey
I am loading data from an iseries into a sql server 2005 DB. Our dates are stored as a numeric value in a format of CYYMMDD where C = Century indicator 20'th is 0 and 21'st is 1, YY = Year, MM = Month and DD = Day!
Today would be 1070701. Now I want to use a derived column which which would be of type date using an expression to do the conversion.
Usually, we would add 19000000 to the number to give us 20070701 then I'd convert it to a string and then substring into a date format.
I'm just getting started with SQL 2005 so I don't know how to do this using an expression.
Any help would be greatly appreciated.
Thanks,
Gray
How can I validate the date that is coming across in a 8 byte character field via an expression? It will either be a valid date or 0. If it is zero I want to make it a null.
View 1 Replies View RelatedIn my Derived Column Transformation Editor I have something like this:
DAY([Schedule]) + MONTH([Schedule]) + YEAR([Schedule])
where [Schedule] is a database timestamp field from a OLEDB Datasource.
I want to produce a string something like: "DD/MM/YYYY"
using the expression above, I get something really wierd like "1905-07-21 00:00:00"
Help much appreciated!
one of my SSIS packages use this expression to put todays date in if it is NULL:
(ISNULL(datejs)) ? GETDATE() : datejs
however, what I really want to do though is put a default date in like '2007-01-01' but I get syntax error because SSIS thinks it's a string, which it is I suppose.
Is it possible to do what I want it to?
Thanks
I am very new to SSIS. Â I need a package to iterate through files in folders and subfolders, evaluate the date of the file and delete them if they are over 90 days. I am using the following as a guide. Â The reason I am not using a maintenance plan for this is that I did not see a way to use a built in maintenance plan task to copy files. Â I already built a package that copies files to the destination. Â Now I need to delete files in the destination that are over 90 days old. Â
[URL] ...
I have a File System Task to delete files. I have a Script Task with a precedence constraint where I need to build an expression on the constraint between the Script Task and the File System Task for the delete. Â
I have database backups in the format of SQLInstanceName_DatabaseName_BackupType_YYYYMMDD_XXXXXXX.bak. Â
I created a variable to store the filename and I need an expression that will convert a file name like :
MySQLInstance_MyDB_DIFF_20150803_1700000.bak into 20150803, compare it to getdate -90 days. Â
I created another variable for the Max File Age. Â I built the below but when I click on Evaluate Expression I get an error stating, "The expression might contain an invalid token, an incomplete token, or an invalid element."Â
DATEDIFF("dd",(DT_DATE)(SUBSTRING(RIGHT( @[User::strFileName], 20 ),1,8), GETDATE()) > Â @[User::intFileMaxAge]
Can someone confirm this for me? The expression language in SSIS has the same limitations on date ranges as Sql Server? That limitation is that valid date ranges are from Jan 1, 1753 to Dec 31, 9999.
When ever I try to do a date function (DATEPART, for example) in a Derived Column Transformation on a date less than 1/1/1753, I get an error. I initially discovered this when bringing data over from Oracle to Sql Server. Just as a test, I created a text file filled with various dates and tried to import it. Whenever a date is less than 1/1/1753, it blows up.
For example, this expression code - DATEPART("YEAR",Date) will yield this error - [Derived Column [24]] Error: The "component "Derived Column" (24)" failed because error code 0xC0049067 occurred, and the error row disposition on "output column "YEAR" (80)" specifies failure on error. An error occurred on the specified object of the specified component.
As a workaround, I've been using a Script Component to do date checking, but this is obviously not ideal.
I have  @for_dte parameter(date data type) in a ssrs report
using below expressionÂ
=Format(Parameters!for_dte.Value, "dd/MMM/yyyy") -i got Output:10/Oct/2015
but i need Output:10/OCT/2015(ie OCT in capitals).
How can i achieve that using expression.
Hello,
I have this expression DATEDIFF(HOUR, startdate,enddate) which only shows the hours. I need to show the hours and minutes too , exp. 9.17. Any way to convert the expression to do this. The startdate and enddate fields are mm/dd/yyy hh:mms. I am using report builder.
Hey all,
I've been ehre off and on when I've needed help. And I know someone answered my question last time with the exact info I needed. But I seem to have lost the query I saved.
I pretty much need a query that can filter a field I have adn pull up any records that are not in in date format. My current field is text and I'm trying to convert it over to DateTime but am getting stuck. Seems at least one of the records does not have a date format.
Thank you all.
I would like to check if the incoming date is valid date and i would also like to check if the date exists in my database.
i am transfering data from a flat file so all the data is string data.
How would i assign the datatype to the incoming columns as they exists in the sql table.Because it would better when i try to compare my incoming columns with the once in my database.
Here when i have a lookup transform and try to map one of my columns with string datatype to a column in my sql table of datatype date time i get a datatype mismatch error. How do i need to check if its date time...and how can i check if the incoming date is valid date.
please let me know
Hi
I need to have a second copy of our databse on another server as backup if something will happen to the first one.
I couldn´t get the sql replication or database mirror to work ( I think the problem i that both servers are running in a workgroup an dnot in a domaine) and now I try to solved my problem with an automatic restore of the full backup (a new full backup is running every night) but now I need a function to check if todays date is the same as a part of the backupfilename and is it possible to do that as a step in the sqlagentjob i have create?
Thanks for any help how I can do that
First I want to thank everyone that has given help to me and everyone else with the issues involving migrating to 2005... Thanks alot..
Now for the problem. I am looking for (an not finding anything of help) to check the date of a file on an ftp server. A file always exists but once a month the day changes. I would just download the file and check it locally but the files are several hundred megs in size so that would be inefficient.
So is there anyway to do that??
On another note, can anyone point me to a good resource for learning the scripting language that SSIS uses??
I have a decimal data type column with a record in the following format 20150219 --> yyyyMMdd. And I am trying to convert the return value from SSRS date/time parameter to a decimal value.
The TMDTOP column is the decimal data type with date records in yyyyMMdd format.
My return parameter is the following:
=IIf(IsNothing(Parameters!SystemDate.Value),Fields!TMDTSY.Value,CDec(Format(Parameters!SystemDate.Value,"yyyyMMdd")))Â
When I try to run the report I get the following error:
Failed to evaluate the FilterValue of the DataSet ‘DataSet1’. (rsFilterEvaluationError)
Hi guys,I have written a stored procedure to check for date range, say if the user enters a value for 'city-from' , 'city-to', 'start-date' and end-date, this stored procedure should verify these 2 dates against the dates stored in the database. If these 2 dates had already existed for the cities that they input, the stored procedure should return 1 for the PIsExists parameter. Below's how I constructed the queries: 1 ALTER PROCEDURE dbo.DateCheck
2 @PID INTEGER = -1 OUTPUT,
3 @PCityFrom Char(3) = '',
4 @PCityTo Char(3) = '',
5 @PDateFrom DATETIME = '31 Dec 9999',
6 @PDateTo DATETIME = '31 Dec 9999',
7 @PIsExists BIT = 1 OUTPUT
8 AS
9
10 CREATE TABLE #TmpControlRequst
11 (
12 IDINTEGER,
13 IsExistsCHAR(1)
14 )
15 /*###Pseudo
16 1. Check the Date From and Date To
17 -- select all the value equal to parameter cityFrom and cityTo
18 -- insert the selection records into tmp table
19 --*/
20 INSERT INTO #TmpControlRequst
21 (ID, IsExists)
22 SELECT ID,
23 IsExists = CASE WHEN DateFrom <> '31 Dec 9999' AND DateTo <> '31 Dec 9999'
24 AND @PDateFrom <= DateFrom AND @PDateFrom <= DateTo
25 AND @PDateTo >= DateFrom AND @PDateTo <= DateTo THEN 1
26 WHEN DateFrom <> '31 Dec 9999' AND DateTo <> '31 Dec 9999'
27 AND @PDateFrom >= DateFrom AND @PDateFrom <= DateTo
28 AND @PDateTo >= DateFrom AND @PDateTo <= DateTo THEN 1
29 WHEN DateFrom <> '31 Dec 9999' AND DateTo <> '31 Dec 9999'
30 AND @PDateFrom >= DateFrom AND @PDateFrom <= DateTo
31 AND @PDateTo >= DateFrom AND @PDateTo >= DateTo THEN 1
32 WHEN DateFrom <> '31 Dec 9999' AND DateTo <> '31 Dec 9999'
33 AND @PDateFrom <= DateFrom AND @PDateFrom <= DateTo
34 AND @PDateTo >= DateFrom AND @PDateTo >= DateTo THEN 1
35 ELSE 0 END
36 FROM RequestTable
37 WHERE ID <> @PID
38 AND CityFrom = @PCityFrom
39 AND CityTo = @PCityTo
40
41 --======== FINAL RESULT
42 -- For tmp table:-
43 -- isExists = 1 ==> date lapse
44 -- isExists = 0 ==> date ok
45 -- if count for (isExists = 1) in tmp table is > 0 then return 1 and data not allow for posting
46 SELECT @PIsExists = CASE WHEN COUNT(*) > 0 THEN 1
47 ELSE 0 END
48 FROM #TmpControlRequst
49 WHEREIsExists = 1
50
51 SELECT @PIsExists
52 --=========
53
54 DROP TABLE #TmpControlRequst
55
56 --=========
57 RETURN(0)However, when I run this stored procedure, 'PIsExists' would always return -1. I am positive that the values that I passed in, had already existed in the database. Any idea what might be causing this problem? Thanks in advance
I'm about ready to pull my hair out. I have a repeater control, and a date field. If the field is a valid date, I'll use it to calculate and display the person's age. Otherwise, I want to display "N/A". My problem is trying to determine if the date field is null or not.I'm using SQL Server 2005 which allows Nulls in the date field, and for many records I don't have a birth date. It makes sense for these records to leave the date Null. This is my code:Protected Sub Repeater1_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles Repeater1.ItemDataBound If e.Item.ItemType = ListItemType.Item OrElse e.Item.ItemType = ListItemType.AlternatingItem Then Dim LabelIcon As Label = CType(e.Item.FindControl("LabelIcon"), Label) Dim LblAge As Label = CType(e.Item.FindControl("LblAge"), Label) Dim inmate As WAP.prisonmembersRow = CType(CType(e.Item.DataItem, System.Data.DataRowView).Row, WAP.prisonmembersRow) If System.IO.File.Exists(Server.MapPath("~/images/picts/" & inmate.FILE2 & ".jpg")) Then LabelIcon.Visible = True End If If inmate.DATE_OF_BIRTH Is DBNull.Value Then If IsDate(inmate.DATE_OF_BIRTH) Then LblAge.Text = "Age: N/A" Else LblAge.Text = "Age: " & GetBirthdate(inmate.DATE_OF_BIRTH) End If End If End IfEnd Sub How can I resolve this?Diane
View 7 Replies View RelatedWithout having to update it every day.
This is so no one enters a value higher than the current date.
ALTER TABLE Persons
ADD CONSTRAINT chk_Person CHECK (Closed_Date>)
Basically, I have a membership table that lists each member with an effective period, Eff_Period, that indicates a month when a member was active. So, if a member is active from Jan to Mar, there will be three rows with Eff_Periods of 201501, 201502 and 201503.
All well and good.But, a member may not necessarily have continuous months for active membership. They might have only been active for Jan, Feb and Jun. That would still give them three rows, but with noncontinuous Eff_Periods; they'd be 201501, 201502 and 201506.There is also a table that logs member activity. It has an Activity_Date that holds the date of the activity - betcha didn't see that comin'. What I'm trying to do is determine if an activity took place during a period when the member was active.
My original thought was to count how many rows a member has in the Membership table and compare that number to the number of months between the MIN(Eff_Period) and the MAX(Eff_Period). If the numbers didn't matchup, then I knew that the member had a disconnect somewhere; he became inactive, then active again. But, then I thought of the scenario I detailed above and realized that the counts could match, but still have a discontinuity.So, is there a nifty little SQL shortcut that could determine if a target month is contained within a continuous or discontinuous list of months?
All,
I am facing below problems in migrating my DTS packages to SSIS.
Could any one answer this ?
1.How to do Tranformations based on condition.Earlier in DTS we are using Activex.
For ex:
if isDate(DTSSource("Due Date")) then
DTSDestination("Due_Date") = DTSSource("Due Date")
end if
I am using script component with below logic:
If Not Row.Due_Date_IsNull Then
If IsDate(Row.Due_Date) Then
Row.Due_Date= Row.EntryDate
End If
End If
Is that correct ?
2.My flat file is having 37 columns.But I am able to see only 21 columns;First 20 columns are showing correctly
and remaining data is showing in 21st column.delimiter is semicolon; Any guess ?
Thanks,
Ravi
Is it possible to check if  the date has been formatted as dd/mm/yyyy i.e. something like this...
if (@EnterDate <> dd/mm/yyyyy )
SET @message = 'date not in the correct format'Â
Hi All,
Is it possible to check the local system date format and then change the format to another format using SQL command in VB.
Eg.
-check current system format dd/MM/yyyy
-change current system format to MM/dd/yyyy format
Thanks
Jam.