hi.
i have created a database with a table called customer. hav a field which displays the date. how can i add a query on the date picker so that when i choose a date on the calendar i can view the customers details. in other display the record by choosing a particular date.
thx.
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp €œ12:00 AM€? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp won€™t appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
I am using reporting services, when I go to view my report in Report Manager (web browser is IE7), I choose a date from a date picker control, and the date that populates the date field is in US format mm/dd/yyyy, however in my regional settings, although I have English(United States) I have altered my short date format to be dd/mm/yyyy.
Currently my report will display an error saying the date is an invalid format if I pick a date that violates the mm/dd/yyyy format. I want it to display the date format that I have defined in my regional settings, without modifying the 'Language Preference' settings for IE.
The report properties has =User!Language for the 'Language' property.
Does anyone have any suggestions?
Hi,
I tried to create parameters in my report. I need one date picker. So i select data type as datetime. in default values i selected as non-queried and in date time functions i selected =Today. But am unable to set current date. Please help me to solve it.
Regards
Nataraj.C
Any way to disable the calendar datepicker show it does not even show up on the report?
View 2 Replies View RelatedHave seen other questions here about modifying date pickers supplied by reports created in BIDS. The answer is usually NO. But this does not involve a format change, simply want to limit say to a specific year.
Any ideas?
hi all,
i've just updated my sql server 2005 with sp1 and sp2.
i want my report date format to change according to regional setting, therefore i've set the report property for language as User.Language.
how do i set the report parameter of type datetime to follow the format of regional setting?
my date parameter has default value which i query from a table.
for e.g. if my regional setting is UK and the default date is 9/7/2006, the date picker will display date at 7 september 2006 instead.
please help.... thanks!
I created a report with two parameters, StartDate and EndDate.
They are specified as datetime type.
When I went to the Preview tab, there were date pickers for both values.
After a week or so of using the report, I thought it would be better if I gave the parameters default values. I spent some time reading what others had done in this forum and used the following as the expressions for the parameters:
Code Snippet
=IIF(Weekday(Today()) =1, FormatDateTime(Today(),2),
IIF(Weekday(Today()) =2, FormatDateTime(Today.AddDays(-1),2),
IIF(Weekday(Today()) =3, FormatDateTime(Today.AddDays(-2),2),
IIF(Weekday(Today()) =4, FormatDateTime(Today.AddDays(-3),2),
IIF(Weekday(Today()) =5, FormatDateTime(Today.AddDays(-4),2),
IIF(Weekday(Today()) =6, FormatDateTime(Today.AddDays(-5),2), FormatDateTime(Today.AddDays(-6),2)))))))
=IIF(Weekday(Today()) =1, FormatDateTime(Today.AddDays(6),2),
IIF(Weekday(Today()) =2, FormatDateTime(Today.AddDays(5),2),
IIF(Weekday(Today()) =3, FormatDateTime(Today.AddDays(4),2),
IIF(Weekday(Today()) =4, FormatDateTime(Today.AddDays(3),2),
IIF(Weekday(Today()) =5, FormatDateTime(Today.AddDays(2),2),
IIF(Weekday(Today()) =6, FormatDateTime(Today.AddDays(1),2), FormatDateTime(Today(),2)))))))
and now, there are no date pickers. I am curious. Why are they gone? Can I get them back and still have my default values?
Thanks,
IanO
I am sure others have ran into this issue.
But I need to have date parameters using the datetime type and I need to be able to pass the correct value to the MDX.
Updated SQL 2005 to SP2 and Reporting Services Date Picker now has dates defaulting to US format (MM/DD/YYYY) instead of our previous English-Australian (DD/MM/YYYY). Both the clients and server are set to English Australian regional settings in the O/S and the reports are composed for English Australian language. Reports have correct format in Visual Studio development and re-deploying them had no effect. Everything was fine under SP1 - not sure what is going on. Any ideas???
View 4 Replies View RelatedIm sure we have all seen this error before:
"The value for the report parameter XXX is not valid for its type"
I have a report (RS 2005) that has 2 date parameters, "start" and "end".
My SQL in not very complicated at all, I have a simple WHERE date between @start and @end
But when I go to view the report in VS2005, I get the above error.
I am yet to find a decent fix for this, what is going on? the date I am trying is:
"26/02/2007" now, obviously its trying to us the en-US formatting, but im in Australia, so I want en-AU.
I have changed my report Language setting to be en-AU, my local settings in Region Setting is English (Australia). (BTW, I had to change the Language setting in my report through the XML, is there a better way to do this?)
How do I fix this?? I have searched an searched but no-one seems to be able to give a clear answer as to what is going on....
I read a lot of posts in this forum, but none of them provide a solution.
Probably it is related to SP2 as many report, I have SP2 as well...
A funny situation:
I have a report parameter @date, datatype datetime, so I can use the datepicker control.
But, even when not using this @date parameter in my dataset, I still get the error:
The value provided for the report parameter 'date' is not valid for its type. (rsReportParameterTypeMismatch)
Of course it has to do with regional settings and languages etc... But at my international client's site, workstations are in any regional setting and servers are in en-US, nothing I can do about that.
Come'on Microsoft, don't tell us this datePicker is only for the US market?
I have a date range parameters in my report, and when viewing it using IE and Firefox ReportViewer, the date picker is there. But when I tried running it using Chrome, the date picker was missing. I tried double click on the date field itself but nothing.
My Chrome version is 17.0.963.79 m. I tried allowing the pop-up blocker but still nothing.
SSRS Date Picker is not working in Google Chrome, it works in both IE and Firefox.
View 3 Replies View Related
Hi,
Does anyone have a workaround or know of a fix to this problem:
Default value set to 'date pick' from date currently within field by setting value equal to that field . ie if date is 01/01/2010 date picker opens in Jan 2010 - works ok.
However, once published to Sharepoint and run through browser the Date Picker ignores the default value and the date picker opens for today. ie April 2008.
Any words of wisdom gratefully recieved,
Howard Stiles
Hello.
I've just created a new report and I added a prameter of type "DateTime".
I didn't even used it in the query.
Whan I preview the report I have the small calendar Icon.
after I pick a time from the picker And press "View Report"
I get the error:
"the value provided for the report parameter P1 is not valid for its type"
I'm using RS 2005.
Any body know whats the problem?
Thanks in advance,
Roy.
Hello.
I've just created a new report and I added a prameter of type "DateTime".
I didn't even used it in the query.
Whan I preview the report I have the small calendar Icon.
after I pick a time from the picker And press "View Report"
I get the error:
"the value provided for the report parameter P1 is not valid for its type"
I'm using RS 2005.
Any body know whats the problem?
Thanks in advance,
Roy.
Oki, I am a newbie so you got to bare with me here.
I am trying to develop a software where I have to input the datetime picker control. What this datetime picker control should allow user is to pick a date and show the data related to that specific date into the datagrid.
For Example.
Database table - Error Codes has a record feild "error_date". When I run the program it shouldn't show anything on the datagrid. I should be choosing the date from the dtp and then click search and it should show me the data onto the datagrid.
Currently the table shows fine on a datagrid when I run the program, it shows the whole list of data into the datagrid but because there is alot of data in it, it takes me atleast 30mins to find something on it. All I want is the data to be filtered by the date and show it to the datagrid.
Could you please kick start me on this?
Many Thanks
Regards
J
Is there a way I can frame the querry for the following scenario??
column1
--------
item1
item2
item3
...
..
Querry: Select datediff(month,item1,item2) and next for item2 and item3...
Thanks
Hello. I know, you think I'm totally clueless, and you're right. SQL is the most confusing thing for me but I must learn it.
So, I am running a query to find out the name of the person who sold the most stoves with the least color purchased. I have ran that query and it works . My problem is that I have to add to that query another column that counts the number of stoves sold, instead of having them displayed one by one. My query is as follows:
SELECT EMPLOYEE.Name,STOVE.Color FROM INV_LINE_ITEM, STOVE, EMPLOYEE, INVOICE
WHERE INV_LINE_ITEM.FK_Stovenbr=STOVE.SerialNumber
AND INV_LINE_ITEM.FK_InvoiceNbr=INVOICE.InvoiceNbr
AND INVOICE.FK_EmpID=EMPLOYEE.EmpID
AND STOVE.Color IN (SELECT CAST(MIN(Color) AS CHAR(5)) 'Min Color' FROM STOVE)
AND EMPLOYEE.Name IN (Select CAST(MAX(Name) AS CHAR(15)) 'Employee Name' FROM EMPLOYEE)
ORDER BY EMPLOYEE.Name, STOVE.Color
Thank you
I have a single table and I want to check for the duplicates. On the bases of two column.
Namley HiNum, Procode.
so if there are duplicates I want to print out those records
How I can do that in a script.
I tried the following codes but I am getting an error. how I can fix it. Or this is completly wrong?
.
Select * from Claims Where HiNum in (Select HiNum,Procode,Count(*) as NumberOfRows
From Claims
Group by HiNumber, Procode
Having Count(*) > 1)
Hi,
I installed SQL SP2 and now the datepicker on the reporting server is formatting the dates in US format regardless of what regional settings are stored on the client.
The version of sql server 2005 is..
Microsoft SQL Server 2005 - 9.00.3054.00 (Intel X86) Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Anyone know how to fix this?
Thanks
Niall
Hello
Can anyone give me the code to insert date from textbox to database(SQL Server 2000). The date fromat in SQL is dd-mm-yyyy.
Rathish
Hi! I 'd like to update the database..I 'd like to update the same field, the first update would set all to 'No' and the second update woyuld set specific records to 'Yes':
1) "Update tblDept SET IsTop ='No'
2) "Update tblDept SET IsTop = 'Yes' WHERE id = 200 "
Cheers!
Hi.
I know this querry:
"SELECT TOP 10 * FROM MyTable ORDERBY ..."
will give the top 10 rows.
But how can I build a querry that can get the rows from 40-50 (ie).
Thanks.
I have two tables linked with the colunm name systemId and I need to get all the systems responding to the condition (t1.software & 0000000001) = 1 and if they have any contacts I would like to see them.
Here is what I have for the moment however my querry do not return the system info if no contact exist and that is wrong.
select customers.customerId,customers.systemId,customers.country
from customers,contacts
where (customers.software & 0000000001) = 1
and customers.SystemId = contacts.SystemId
order by customerid
Systems
-SystemId
-CustomerId
-Name
...
Contacts
-ContactId
-SystemId
-Name
-Tel
...
I have created a small querry and for some reason my container (datalist) is not reconizing the company name This is also the first time that i have created a querry with two select statements in the sproc.... Does it make a difference if there is two select statements in a querry?? When populating a datalist?Not sure if i need to seperate the two statements some kind of way..
Is this ok to use with datalist? Erik.. ALTER PROCEDURE Get_Information_For_Datalist_Global_ @IDProduct AS INT, @IDCompany AS INT AS SELECT Product.ProductName, Product.ProductID,Product.ProductImage, Product.ProductDescription, SprocsTable.* FROM Product INNER JOIN SprocsTable ON Product.ProductID = SprocsTable.ProductID WHERE Product.ProductID = @IDProduct SELECT Company.CompanyID, Company.CompanyName FROM COMPANY WHERE COMPANY.COMPANYID = @IDCompany
is there a way to get the time that it takes a querry to run like down to the millsecond
View 2 Replies View Relatedhi.
i want to have a text box and command button. i will be entering the clients id in the text box and press the command button to search the clients record. this will be search query. i have done that previously in vb6. but dont know what query to write in vb08. Any help. thks.
Why is it that when you want to add a user or a group to SSRS through either Management Studio or the Reports Manager, you have no people picker to lookup into Active Directory.
You can pull up AD users and computers in MMC and do a search and then put their account name in - but that seems like a huge pain.
Am I missing something here - or did Microsoft miss something really big here.
Is there a way to display my querry horizontally?
View 2 Replies View RelatedThere are 3 servers in our group which the Local Enterprise Manager Tool is giving us an error when we try to view local DB table data by right-clicking on the table and selecting return all rows... we get this error I thought this was a permissions error but as far as I know we haven't played with the permissions. This seems to be a common ailment here... does anyone have a fix for the EM tool.
An unexpected error happened during this operation.
[Query] - Query Designer encountered a Query error:
Unspecified error
I have two database on same server. I want write a querry, witch qering the data from 1st database, than create a new table on the 2nd database.
But the in clause after the into clause permanently generate error.
Here is the query€™s little part:
Select €¦..
into Backup in €™Test.mdb€™ from €¦
I try wrote other ways
in €™Test€™
in €™dbo.Test€™
in dbo.Test
but none of them work
its only work, when i not want pass for the second database
How can i pass the result for the 2nd Database