I want to retrieve a date time field from SQL server. The format I want it to be retrieved is:
YYYY/MM/DD-hh:mm:ss:lll (l = millisec)
example '2006/06/21-15:26:39:994'.
Can somebody please tell me how to do it. I know how to do it in Oracle, but not in SQL server.
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp €ś12:00 AM€? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp won€™t appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
Hello,
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
thank you
Kiran
In a select statement a date field contains 1/1/2004 3:00:00 AM.In my select statement how do I get the field to show as 1/1/04?
Thanks
I have a table where the date and time stamp are logged together and I want to only show the date in a 10 character output. Also I want to return as blank some dates in the field that are 01/01/1800.
The current table format is 2013-06-28 00:00:00:000..I just want the date. I was using RTRIM function but it keeps erroring out.
Would it be possible to change the date time from varchar to datetime. it currently showing as varchar in the following format 20080401 0845
can it be changed to date/time format into something like this 01/04/2008 08:45. If someone could help that would be great. Many thanks
I am using below query to get the data and time+2 hrs
selectdateadd(hour, datediff(hour, 0, getdate()) + 2, 0)
getting results as like this
2014-10-30 13:00:00.000
but i don't need any dashes between dates i mean i am expecting results as shown below
20141030 13:00:00.000
Precisely, here's what I need:When I run getdate(), I get, for example:August 9 2004 5:17 P.M.I want to turn the date portion into:8/9/2004 format and update one column with itI want to turn 5:17 P.M. into:hhmmss and update another column with it.I've been playing around with datepart, with substr, with you name it,and I'm stumped.Any code samples, other help most appreciated.Thanks,Google Jenny*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHi
I have many existing tables within my db with the date format mm/dd/yyyy
Is it possible to run a stored procedure in order to convert the EXISTING records to the date format dd/mm/yyyy?
Thanks
hi all
I have two date/time fields as below:
=(Fields!ClosedDate.Value)-(Fields!CreatedDate.Value)
result can sometimes look like this 14:01:42.3840000
how do I format this
I have tried
=FormatDateTime((Fields!ClosedDate.Value)-(Fields!CreatedDate.Value), 2)
but this gives an error
I want the result to look like this
14:01:42.38
thanks
Dianne
Hi,
I want to retrieve some parameter values from Reporting Services using GetReportParameters from
Microsoft.SqlServer.ReportingServices.ReportService2005.
It works fine unless the parameter types are date/time. In such a case it seems as if the format of the parameter depends on the ReportServices installation:
Example:
On a German installation the date/time format is "dd.mm.yyyy" but on an English installation the format is different (mm/dd/yyyy) (and of course the time part is also different).
Is there a way to determine the format to be expected? (... even in the case I've no knowledge about the server ReportingServices is running.)
Im working with a breaking system and I wont to convert the (FROM) datetime column to accept just time like (4:00:00 AM) without the date (7/23/2004) but it doesn’t have column format like the access ??
I found something in the SQL help :
How to convert the format of a Date Time String transformation (Enterprise Manager)
To convert the format of a Date Time String transformation
1.On the Transformations tab of the Transform Data Task Properties or Data Driven Query Task Properties dialog box, click the Source column containing the date or time to be modified, and then click the Destination column where you want the modified string to be placed.
2.Do one of the following:
•If there is a mapping arrow connecting the two columns, click Delete, and then click New.
•If there is no mapping arrow, click New.
3.In the Create New Transformation dialog box, click DateTime String.
4.Click the General tab, and then click Properties.
5.In the Date Format list, select the format you want.
6.Click Naming to display the Calendar Names dialog box, where you can select long or short day or month names and the A.M. and P.M. designators you want.
7.In the Language list, select the language you want, and then click Set Language Defaults.
But unfortunately I didn't find the "Transformations tab" I look a lot in the SQL Enterprise Manager
Do anybody work with the Transformations or at least know where is it please ???
I have a standard datetime and I need to convert it to the client specification of:
YYYY-MM-DDThh:mm:ssTZD
eg: 2009-04-16T19:20:30+08:00
I am not sure of the easiest way to do this.
The test code below gets me part of the way but I am unsure on how to get the offset on the end without hardcoding to much.
DECLARE @datetime DATETIME = '2014-12-20 12:30:00'
SELECT CONVERT(VARCHAR(30),@datetime,127)
hello all,
i am making a query which select the data again a particuler date.
I insert values in the table for with current date(Today's date) and the records is inserted with the date format(2006-07-14 16:12:09),now when i run the query after 2 or 3 minutes to select the records inserted today, my query returns no results.
I think it is because of the the time (14:16 in this case) that after 2 minutes, the query looks for the records inserted at (2006-07-14 18:12 or 2006-07-14 19:12) and does not get the result.
Is there a method to not consider the time(14:16) when running the query but the query fetches the records including the records inserted at this time(14:16) no matter at what time I run the query today?
Please anyone help me!
Thanks in advance!
hello,
I am trying to insert date and time into my table.
insert into <table_name> values('12/12/2006','12:23:04');
but it displays error at " ; "
can anyone help me to figure out the problem
Thanks a lot in advance.
Regards,
Sweety
I have two fields DSRHADTI which is an isodate and DSRHTIME which is 8 char time field in format 10.31.00. I want to take both these fields and put them into a field that is database timestamp so I have converted DSRHDATI to 10 character field. I am then trying to use substring to put both into 18 character field using derived column transformation editor. but it does not like the below. It's red syntax error what am I missing.
(SUBSTRING(Copy of DSRHDATI,1,4) +' /' + SUBSTRING( Copy of DSRHDATI,6,2) + '/ ' + SUBSTRING(Copy of DSRHDATI,9,2)) + SUBSTRING(DSRHTIME,1,2) + '.' + SUBSTRING(DSRHTIME,4,2) + '.' + SUBSTRING(DSRHTIME,7,2)
One I get the above to work I plan on convert 18 char to datetimestamp.
Am I on the right track on how to do this?
We are using an ADO.NET provider in SSIS to read data from a SQL Server 2000 table that contains DateTime columns to write to a Flat File Destination. When the date values are written to the file they are formatted in TimeStamp to the 10th decimal position; e.g.€ś2006-04-24 12:00:00.123000000€?. Since SQL Server supports values to Timestamp(3), we need to truncate the last seven zeros to put the data in this format €ś2006-04-24 12:00:00.123€? to keep the file as small as possible.
Since we have several hundred DateTime columns in scope for our requirements we are looking for the least logic/effort to accomplish this task. We can do this via Data Conversion and Derived Column transformations to cast the dates and strings but it is very labor intensive. It would be something like singing 99 bottles of beer on the wall eight times in a row with each verse taking 3 minutes each. Yikes.
We have tried casting the DateTime columns to varchar in the SELECT statement but receive this format €śApr 24 2006 12:22PM€?.
Is there a configuration we've missed that forces timestamp(10) with non significant digits?
what would be the TSQL in trying to create a new table with date-time format ending via a select into like:
select
*
into tblResults_
+
SELECT
CONVERT(VARCHAR(10),GETDATE(),112)
+
'_'
+
REPLACE(CONVERT(VARCHAR(10),GETDATE(),108),':','_')
from qryResult
E.g, i have a store procedure. The start date is long date (4/15/2007 3:00pm). i want to select the start date with a particular date (short date format 4/15/2006). Thanks in advance.
View 1 Replies View RelatedWorking on a new database where the Date and Time are stored in a Date Time Field.
Then working on an OLDER database file within the same SQL Database contains these 2 items as integers:
transDate = "71615" (July 16, 2015)
transTime = "12345" (01:23:45 AM)
How do we convert both of them into a single SQL DateTime field such as "2015-07-16 01:23:45.000" so that it can be used in a join restricting to a date time in a different SQL File that properly has the DateTime in it?
This works well for converting the transDate Part in the select statement:
  dbo.IntegerToDate(at.transDate) as transDate
  * That returns: "2015-07-16 00:00:00.000"
* The resulting data must work directly in a Microsoft SQL Server Management Studio Query using either using the "on" statement or part of the "where" clause. In other words, NOT as a stored procedure!
Also must be able to be used as a date difference calculation when comparing the 2 files Within say + or - 5 seconds.
Hi
I am trying get my VB6 application to insert a record into a table (SQL Express) which has a datetime column but it would not process if the data format is differ to *American Date format*.
The date() function in VB returns 15/11/2006 which is in Australian Date format (DD/MM/YYYY) according to my setting in "Reginal and Lanuage Option-> Locale 0> English (Australia)" setting.
I get the following error:
Msg 242, Level 16, State 3, Server KITSQLEXPRESS, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
My computer's locale is set to English (Australia) and I expect the datetime format would follow what is set in system locale
I've read an article somewhere on the net about how SQL 2005 eliminate the confusion of date conversion when read/write datetime records into a table...but it seems to me that it is still as in-flexible as MS Access
Is there a setting in the database that takes care of it?
Thanks
This is driving me nuts..
I'm trying to extract some data from a table in oracle. The oracle table stores date and time seperately in 2 different columns. I need to merge these two columns and import to sql server database.
I'm struggling with this for a quite a while and I'm not able to get it working.
I tried the oracle query something like this,
SELECT
(TO_CHAR(ASOFDATE,'YYYYMMDD')||' '||TO_CHAR(ASOFTIME,'HH24:MM : SS')||':000') AS ASOFDATE
FROM TBLA
this gives me an output of 20070511 23:06:30:000
the space in MM : SS is intentional here, since without that space it appread as smiley
I'm trying to map this to datetime field in sql server 2005. It keeps failing with this error
The value could not be converted because of a potential loss of data
I'm struck with error for hours now. Any pointers would be helpful.
Thanks
Hi,
I have a column date in my database which I should send it to Oracle database. The Date format in Oracle is number. I don’t know how should I convert the date to that format?
Example :
SQL FormatOracle Format
02/16/05 105046
Thanks.
SELECTÂ
  CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
  CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate   04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
We are migrating data from old DB2 systems to sql server 2012, the DATE FORMAT in those systems is in decimal format with 7 digits. CYYMMDD format.
I need to convert this into DD/MM/YYYY format.
I am in need of a format string or simple vb code that can add the local time zone to the end of a time field.. Something like:
9:36 AM EST
9:36 AM PST
This timezone will just come from the machine that the reporting server is on. I don't see this listed as a standard format, and I have come up empty so far in my research - anyone got a solution for this?
Thanks a bunch!
I have date coming to one page as a string in the following format"May 4 2005 12:00AM"
I need to query one of my tables using this date in combination of other nondate values. How can I convert this date into valid sql server datetime format before I query a database tables
Please help
Hi,I have a problem with updating a datetime column,When I try to change the Column from VB I get "Incorrect syntax near'942'" returned from [Microsoft][ODBC SQL Server Driver][SQL Server]'942' is the unique key column valueHowever if I update any other column the syntax is fineThe same blanket update query makes the changes no matter what isupdatedThe problem only happens when I set a unique key on the date field inquestionKey is a composite of an ID, and 2 date fieldsIf I allow duplicates in the index it all works perfectlyI am trying to trap 'Duplicate value in index' (which is working onother non-date columns in other tables)This is driving me nutsAny help would be appreciated
View 5 Replies View RelatedUsing DTS package in 2000 version, I am dumping TXT file contents into SQL Table,
I have one column having date in format YYYYMMDD(20070929) and corresponding column in SQL is datetime, but it fails on data type mismatch.
I have no choice of making date column in SQL to string or Varchar etc,
is there any way to make that date column in SQL to convert the value upon transformation from format (YYYYMMDD) to M/DD/YYYY (9/29/2007).
many many thanks,
I am having report parameter end date I am showing the default value "5/21/2007 11:59:59 PM" in the end date paramter. And also I want to show date time format "(MM/DD/YYYY HH:MMS)" in the right hand side of the parameter. How to do this?
Thank You
i have a excel file in which i have a date column it having the below date formats belowÂ
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
Aim – Convert the following field ”[INSTALLATION_DATE]” date format from “20090709” Into this “2009-07-09” ,
Also create a new column called “BegMonth” which selects first day of the given month of the converted date column
The table is ;
SELECT
[FDMSAccountNo],
[INSTALLATION_DATE]
FROM [FDMS].[dbo].[stg_LMPAB501]
Results
FDMSAccountNoINSTALLATION_DATE
87800000088420030521
Required Results
FDMSAccountNoINSTALLATION_DATEBegMonth
8780000008842003-05-212003-05-01