Datetime As A Variable To Sp.
Aug 29, 2001How to pass datetime as a variable to an sp? Can any one give the syntax??thanks.
View 1 RepliesHow to pass datetime as a variable to an sp? Can any one give the syntax??thanks.
View 1 RepliesHI,
I HAVE A PROBLEM WITH A VARIABLE THAT I AM NOT BEEN ABLE TO SORT OUT.
DECLARE @DATE NVARCHAR(100)
SET @DATE = MONTH(GETDATE())
EXEC ('SELECT ' + @DATE)
WHEN I RUN THIS, I HAVE NO PROBLEM AS IT GIVES ME THE ANSWER SAY 5 AS IT IS MAY.
BUT,
WHEN I RUN A VARIABLE CONTAINING DATETIME,
DECLARE @DATE DATETIME
SET @DATE = GETDATE()
EXEC ('SELECT ' + @DATE)
IT GIVES ME AN ERROR :-
"Line 1: Incorrect syntax near '12'. "
IS THERE A WAY THAT I CAN USE DATETIME AS VARIABLE IN THIS CASE.
Hello,
I have a SP that recevies a date value for a users date of birth called "dob".
However when passing it into the class which contains the Stored procedure it gives an error.
Below is my code
please advice
Thanks
Ehi
1
2 command.Parameters.Add(new SqlParameter("@usernames", SqlDbType.Int, 0, "RegionID"));
3 command.Parameters.Add(new SqlParameter("@username", SqlDbType.VarChar, 20, "username"));
4 command.Parameters.Add(new SqlParameter("@First_Name", SqlDbType.VarChar, 50, "First_Name"));
5 command.Parameters.Add(new SqlParameter("@Last_Name", SqlDbType.VarChar, 50, "Last_Name"));
6 command.Parameters.Add(new SqlParameter("@dob", SqlDbType.Date, 50, "dob"));
7
8 command.Parameters[0].Value = 4;
9 command.Parameters[1].Value = "username";
10 command.Parameters[2].Value = "First_Name";
11 command.Parameters[3].Value = "Last_Name";
12 command.Parameters[4].Value = DateTime.Parse(dob.Text);
HERE IS THE ERROR MESSAGE
Compiler Error Message: CS0103: The name 'dob' does not exist in the current context
Source Error:
Line 40: command.Parameters[2].Value = "First_Name";
Line 41: command.Parameters[3].Value = "Last_Name";
Line 42: command.Parameters[4].Value = DateTime.Parse(dob.Text);
Line 43:
Line 44: int i = command.ExecuteNonQuery();
Source File: c:inetpubwwwrootcellulant1App_Codesignup_data-entry.cs Line: 42
Hello,
I have a DateTime variable called CurrentDate that needs to reflect the current date, but the date portion only. I checked several functions in the Expression Builder to use with GETDATE() so that I could just get the date portion, but I didn't see anything that really fit. In a SQL query I would normally use CONVERT to do this.
Any ideas?
Thank you for your help!
cdun2
I was not able to find the solution myself so here I am to ask you.
I'm using an Ole DB Source with the SQL command from variable.
My variable expression needs to look like this:
select * from dbo.fx_function (SomeDateVariable)
My sql server fx_function recieves as a parameter datetime, my variable SomeDateVariable is datetime type.
I tried all different types of cast on @User :: SomeDateVariable but I either can't evaluate the expression or I have errors trying to execute the package.
Any ideas how the expression should look like?
I'll keep trying...
How can I return a datetime type variable from a stored procedure in SQL Server to C# code?
View 4 Replies View RelatedCAST a variable into a datetime object
I need to do a CAST(@variable_name as datetime)
this won't work because @variable_name has the following format
'dd/mm/yy hh:mi:ss:mmmAM'
like how do i specify a style for it.
please help..
James : (
I am having the wrost trouble with this today for some dumb reason...
Please don't suggest any alternates; this is just a quick example, full code is more elaberate.
Today is 07/19/2007
Declare @StartDate DateTime
@StartDate = CONVERT(VARCHAR(10), Month(GetDate()) & "/22/" & Year(GetDate()), 101)
So I want @StartDate = '07/22/2007'
What I need is CDate
two variables declared in my proc:@DATE_RANGE_START as datetime,@DATE_RANGE_END as datetime,When I execute my SP it takes 34 seconds.When I change the variables to:@DATE_RANGE_START1 as datetime,@DATE_RANGE_END1 as datetime,and add this to my sp:declare @DATE_RANGE_START datetimedeclare @DATE_RANGE_END datetimeset @DATE_RANGE_START = @DATE_RANGE_START1set @DATE_RANGE_END = @DATE_RANGE_END1the SP runs in 9 seconds (which is expected)Passing in '1/1/01' and '1/1/07' respectivly.Everything else is equal and non-important to this problem.Why does it take 34 seconds when I use the variables from the inputparameters?Interesting isn't it.Jeff
View 5 Replies View RelatedThe source table has timestamp column (Modified Date), which gets upated with each modification via an update trigger.
I store the MAX(modifieddate) in a DeltaExtractionHistory Table in the staging database for each extraction or package execution. Then in the next run, I need to pick the coulmns that have a greater datetime, than the last extracted MAX(ModifiedDate) in the DeltaExtractionHistory table for delta processing.
The OLEDB source has the following SQL statement:
SELECT * FROM [dbo].[MyTable] WHERE [ModifiedDate] > ?
with the following parameter:
Parameter 0 : dtLastModifiedDate
dtLastModifiedDate is an SSIS variable of type Datetime. I read the value of MAX(ModifiedDate) in this variable in a SQLExecuteTask prior to running the data flow task that contains the OLEDB source task.
The problem is - instead of extracting greater datetime, it also extracts the MAX(Modifieddate), which was already extracted in the last run. In other words instead of functioning as [ModifiedDate] > ?, it is functioning as [ModifiedDate] >= ?
because of this, the primary key gets violated on the target table. I think this is happening because the date is stored as "2007-03-01 11:56:34.550" in the table, but SSIS variable shows it in the data viewer as "01/03/2007 11:56:34 PM". It truncates the milliseconds and picks the same date again, because it thinks milliseconds .550 is greater than 000. But I am not 100% sure, may be it is only showing this in the dataviewer, but it contains the ms part as well. I tried using
SELECT * FROM [dbo].[MyTable] WHERE [ModifiedDate] > ? AND DATEPART(ms, MODIFIEDDATE) > DATEPART(ms, ?)
But it fails with an error that the provider was not able to parse the SQL and try storing the statement in the SQL variable. I could not succeed in that - the statement never parses with the parameters.
Can someone please help in this.
Thanks
Hi I'm new to MS SQL and trying to write a very small dynamic stored procedure which is giving me a headache.
What I have is:
CREATE PROCEDURE busy_report
@TableName varchar(255),
@reporteddate datetime=NULL
AS
if @reporteddate is null
select @reporteddate = CURRENT_TIMESTAMP
-- Create a variable @SQLStatement
DECLARE @SQLStatement varchar(255)
SET DATEFORMAT dmy
-- Enter the dynamic SQL statement into the
-- variable @SQLStatement
SELECT @SQLStatement = "SELECT vendor, reporteddate, count(vendor) FROM " +
@TableName + "WHERE reporteddate = ' "
+ @reporteddate + " '"
-- Execute the SQL statement
EXEC(@SQLStatement)
GO
The error I keep getting is:
Server: Msg 8114, Level 16, State 4, Procedure busy_report, Line 0
Error converting data type varchar to datetime.
Any ideas appreciated.
(Edit:)
I've also tried it this way:
CREATE PROCEDURE UK_busy_report
@TableName varchar(255),
@reporteddate datetime=NULL
AS
-- Create a variable @SQLStatement
DECLARE @SQLStatement varchar(255)
SELECT @reporteddate=CONVERT(datetime, @reporteddate)
IF @@ERROR <> 0 BEGIN
/* Do some error processing */
PRINT 'Error Occured' END
ELSE
-- Enter the dynamic SQL statement into the
-- variable @SQLStatement
SELECT @SQLStatement = "SELECT vendor, reporteddate, count(vendor) FROM " +
@TableName + "WHERE reporteddate = ' "
+ @reporteddate + " '"
-- Execute the SQL statement
EXEC(@SQLStatement)
GO
Which gives me the same error!
.logic.
HI
can i assign a string column to a date column
string column contain date data.
UPDATE TABLE ENT SET EXPIRE_DATE = PREVIOUS_TRN_VALUE
where EXPIRE_DATE is a datetime column
PREVIOUS_TRN_VALUE is a string column having the value '2007-05-07'
thanks
I have a package variable that is a datetime... how am I able to set the time of that variable? In visual studio on the variables screen if I click on value it brings up a calendar control - I can't seem to edit the time portion of the variable.
When I first click open the variables window it will say 9/1/2006 12:00:00 AM - but as soon as I click on the value box the 12:00:00 AM part will disappear and I can't edit it. I've tried on someone elses PC as well to make sure there isn't something wrong with my visual studio
Ideas?
Hello,
I have a package variable called LatestTableFileDate that is typed to DateTime. I have an Execute SQL Task that executes the following SQL statement against an MS Access 2000 database table through the OLEDB Jet provider;
SELECT MAX(FileDate) AS MaxFileDate
FROM CollectionData_Access
The statement parses fine. At the moment, the returned value is NULL. I have 'Result Set' set to 'Single Row'. The FileDate column in the Access table is 'Date/Time', and the Format is 'Short Date'.
In the result set properties, I attempt to set the result to the LatestTableFileDate user variable. When I run the task, the task fails, and the following appears on the 'Progress' tab;
[Execute SQL Task] Error: An error occurred while assigning a value to variable "LatestTableFileDate": "Unsupported data type on result set binding 0.".
I searched the forum for this problem, and didn't find anything. Do I need to convert the date in MS Access to a string and set the package variable to a string type, or is there some other way to handle this?
Thank you for your help!
cdun2
Since I've installed SP1 the minimum value for a package variable has changed.
The former version used 12/30/1899 as the minimum value that can be entered.
Now the min value has changed to something about 1960.
During package execution I'd like to distinguish between two states:
1. The Variable has not yet been written to.
2. Any of my executable has written to it.
At the moment I check the value of it to be the minimum value (see above) or not.
So if I develop packages under SP1 I get into trouble.
Any way out of it?
Thanks
Fridtjof
[EDIT] The mindate in C# differs from both date values mentioned above! Consistency? Hum![/EDIT]
I am getting wrong output when assigning a datepart function to a variable. I should get 2006 but instead I get an output 1905.
Below is the code and output. Any help will be greatly appreciated. Thanks
DECLARE @FiscalStartCurrYear datetime
SET @FiscalStartCurrentYear = DATEPART(year, GETDATE())
select @FiscalStartCurrYear
Output
-----------
1905-06-30 00:00:00.0000
In one step of an SSIS package, i create an outgoing XLS filename based on the current datetime setting, a la:
"myFileName_" + (DT_WSTR,4)YEAR( getdate()) + RIGHT("0" + (DT_WSTR,2)MONTH( getdate()),2)+
RIGHT("0" + (DT_WSTR,2)DAY( getdate()),2) +
RIGHT("0" + (DT_WSTR,2)DATEPART("hh", getdate()),2) +
RIGHT("0" + (DT_WSTR,2)DATEPART("mi", getdate()),2) +
RIGHT("0" + (DT_WSTR,2)DATEPART("ss", getdate()),2) +".xls"
which provides the format as myFileName_yyyymmddhhmmss.xls.
This value is then assigned to a variable, user::myFilenameDateTime.
This variable is referred to in various steps which need the full pathname or filename.
I found, though, that in subsequent steps, the value for user::myFilenameDateTime is re-calculated whenever the variable is invoked.
So in one Task i created the physical output XLS file and named it "correctly", eg, myFileName_20070428090204.xls; in the next Task, i call a Stored Procedure in SQL Server 2005 to email the file with a corresponding message (that pulls in more data from the database).
The single Parameter to the Stored Procedure (that does the emailing) is the supposed/expected full Pathname of the outgoing file just produced but the parameter no longer represents the original filename -- and has changed slightly (a few seconds have been added) and the filename is now, myFileName_20070428090210.xls; consequently, my Email Distribution program cannot find the file with that specific name, although File = myFilename_20070428090204.xls does certainly exist.
so it appears that these variables are calculated realtime whenever encountered.
1) Am I misunderstanding something or misusing the variable assignment?
2) How can i keep << myFileName_yyyymmddhhmmss.xls >>, "static" throughout the duration of the overal SSIS Process.
3) I would think that even if I assign the derived myFileName value initially to ANOTHER "static" variable, this won't achieve anything because the new variable will be re-calculated again, as well, when it is invoked.
thx/spirits,
seth j hersh
Please help!
I am designing an SSIS package and need to change the value of a DateTime global variable with the value returned from an Execute SQL task. The queary is as follows:
Select Versiondate = dateadd(dd,+1,Max(CreateDate)) from msdb..sysdtspackages p with(nolock)
where name = '@name'
The error message is as follows:
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at VersionDate_Set, Execute SQL Task: Executing the query "Select Versiondate = dateadd(dd,+1,Max(CreateDate)) from msdb..sysdtspackages p with(nolock)
where name = '@name'" failed with the following error: "The type of the value being assigned to variable "User::VersionDate" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: VersionDate_Set
SSIS package "Package.dtsx" finished: Success.
The variable is set to data type DateTime, but the value will not change. Any ideas?
I'm looking at http://blogs.conchango.com/jamiethomson/archive/2007/03/13/SSIS_3A00_-Property-Paths-syntax.aspx and http://blogs.conchango.com/jamiethomson/archive/2005/10/11/SSIS_3A00_-How-to-pass-DateTime-parameters-to-a-package-via-dtexec.aspx trying to understand where we are at using datetime overrides in ssis from the command line. One of these articles suggests something has been fixed in ssis sp1, what part of this issue was fixed?
Can you override (from the command line) a user var in ssis whose ValueType property is datetime? Or do some of the older articles still apply, ie the user var must be string so that ssis wont create a separate user var with the same name etc etc? And if it is string, does some kind of conversion need to be done to compare it against datetime cols in t-sql inside the pkg?
I already know that the syntax is
dtexec /F Package.dtsx /SET Package.Variables[User::Var].Properties[Value];2007-01-02.
If this has been fixed, was it fixed in service pack 1, 2?
I have created one variable name migration_start datetime which give me default format of 6/11/2015 1:26 AM...But I expecting to get in 2015-06-11 01:26:22.813 format.I have used below expression betting getting issue with that
(DT_STR, 4, 1252) DATEPART("yyyy" , @[User::migration_start]) + "-" + RIGHT("0" +
(DT_STR, 2, 1252) DATEPART("mm" , @[User::migration_start]), 2) + "-" + RIGHT("0" + (DT_STR, 2, 1252) DATEPART("dd" , @[User::migration_start]), 2)
Hello,
I'm attempting to pass a datetime variable to a stored proc (called via sql task). The variables are set in a previous task where they act as OUTPUT paramters from a stored proc. The variables are set correctly after that task executes. The data type for those parameters is set to DBTIMESTAMP.
When I try to exectue a similar task passing those variables as parameters, I get an error:
Error: 0xC002F210 at ax_settle, Execute SQL Task: Executing the query "exec ? = dbo.ax_settle_2 ?, ?,?,3,1" failed with the following error: "Invalid character value for cast specification". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If I replace the 2nd and 3rd parameters with quoted strings, it is successful:
exec ?= dbo.ax_settle ?, '3/29/06', '4/30/06',3,1
The stored proc is expecting datetime parameters.
Thanks for the help.
Mike
I am using Execute sql task in my SSIS package, and I am trying to make the following query:
<o:p></o:p>
Select max(sqlid) from archive.dbo.Archivebbxfbhdr
where timein <= ?<o:p></o:p>
Where ? is my input parameter variable migration_start which is a datetime.<o:p></o:p>
My issue is that variable name migration_start which give me default format of 6/11/2015 1:26 AM
But I expecting to get in 2015-06-11 01:26:22.813 format.<o:p></o:p>
How I can I change the datetime format of my variable to be (yyyy/mm/dd)hh:mm:ss)?<o:p></o:p>
I need to set a variable to datetime and time to exact milliseconds in SQL server in stored procedure.
Example:
set MyUniqueNumber = 20071101190708733
ie. MyUniqueNumber contains yyyymmddhhminsecms
Please help, i tried the following:
1. SELECT CURRENT_TIMESTAMP; ////// shows up with - & : , I want single string as in above example.2.
select cast(datepart(YYYY,getdate()) as varchar(4))+cast(datepart(mm,getdate()) as char(2))+convert(varchar(2),datepart(dd,getdate()),101 )+cast(datepart(hh,getdate()) as char(2))+cast(datepart(mi,getdate()) as char(2))+cast(datepart(ss,getdate()) as char(2))+cast(datepart(ms,getdate()) as char(4))
This one doesnot display day correctly, it should show 01 but shows 1
Hi,
I'm inserting a datetime values into sql server 2000 from c#
SQL server table details
Table nameate_test
columnname datatype
No int
date_t DateTime
C# coding
SqlConnection connectionToDatabase = new SqlConnection("Data Source=.\SQLEXPRESS;Initial Catalog=testdb;Integrated Security=SSPI");
connectionToDatabase.Open();
DataTable dt1 = new DataTable();
dt1.Columns.Add("no",typeof(System.Int16));
dt1.Columns.Add("date_t", typeof(System.DateTime));
DataRow dr = dt1.NewRow();
dr["no"] = 1;
dr["date_t"] = DateTime.Now;
dt1.Rows.Add(dr);
for(int i=0;i<dt1.Rows.Count;i++)
{
string str=dt1.Rows["no"].ToString();
DateTime dt=(DateTime)dt1.Rows["date_t"];
string insertQuery = "insert into date_test values(" + str + ",'" + dt + "')";
SqlCommand cmd = new SqlCommand(insertQuery, connectionToDatabase);
cmd.ExecuteNonQuery();
MessageBox.Show("saved");
}
When I run the above code, data is inserted into the table
The value in the date_t column is 2007-07-09 22:10:11 000.The milliseconds value is always 000 only.I need the millisecond values also in date_t column.
Is there any conversion needed for millisecond values?
thanks,
Mani
I'm getting error:
String was not recognized as a valid DateTime.
my insert parameter:
<asp:Parameter Name="LastModified" Type="DateTime" DefaultValue= "<%=DateTime.Now.ToString() %>"
my insert command:
InsertCommand="INSERT INTO [Product] ([Enabled], [ProductCode], [ProductName], [ProductAlias], [CarrierId], [DfltPlanId], [DoubleRating], [DoubleRateProductId], [ConnCharges], [StartDate], [EndDate], [Contracted], [BaseProductId], [LastModified], [LastUser]) VALUES (@Enabled, @ProductCode, @ProductName, @ProductAlias, @CarrierId, @DfltPlanId, @DoubleRating, @DoubleRateProductId, @ConnCharges, @StartDate, @EndDate, @Contracted, @BaseProductId, @LastModified, @LastUser)"
LastModified is a datetime field.
Running sql2005
Hi all, having a little problem with saving dates to sql databaseI've got the CreatedOn field in the table set to datetime type, but every time i try and run it i get an error kicked up Error "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."I've tried researching it but not been able to find something similar. Heres the code: DateTime createOn = DateTime.Now;string sSQLStatement = "INSERT INTO Index (Name, Description, Creator,CreatedOn) values ('" + name + "','" + description + "','" + userName + "','" + createOn + "')"; Any help would be much appreciated
View 4 Replies View RelatedHey :)I'm facing a lot of troubles trying to create a new pause/break-system. Right now i'm building up the query that counts how many records that is inside 2 fields. Let me first show you my table:
ID (int) | stamp_start (Type: DateTime) | stamp_end (Type: DateTime) | Username (varchar)0 | 17-03-07 12:00:00 | 17-03-07 12:30:00 | Hovgaard
The client will enter a start time and a end time and this query should then count how many records that are inside this periode of time.
Example: The client enter starttime: 12:05 and endtime: 12:35.The query shall then return 1 record found. The same thing if the user enters 12:20 and 12:50.My current query looks like this:SELECT COUNT(ID) AS Expr1 FROM table WHERE (start_stamp <= @pausetime_start) AND (end_stamp >= @pausetime_end)But this will only count if I enter the exact same times as the one inside the table.Any ideas how I can figure this out?Thanks for your time so far :)/Jonas Hovgaard - Denmark
Hi,
I have a column of type datetime in sqlserver 2000. Whenever I try to insert the date
'31/08/2006 23:28:59'
I get the error "...datetime data type resulted in an out-of-range datetime value"
I've looked everywhere and I can't solve the problem. Please note, I first got this error from an asp.net page and in order to ensure that it wasn't some problem with culture settings I decided to run the query straight in Sql Query Anaylser. The results were the same. What else could it be?
cheers,
Ernest
I am inserting date and time data into a SQL Server 2012 Express table from an application. The application is providing the date and time as a string data type. Is there a TSQL way to convert the date and time string to an SQL datetime date type? I want to do the conversion, because SQL displays an error due to the
My date and time string from the application looks like : 3/11/2014 12:57:57 PM
Nothing difficult, I just need a way to generate a new datetime column based on the column [PostedDate], datetime. So basically I want to truncate the time. Thanks a lot.
View 5 Replies View Relatede.g.
1st March 2005 12:00:00
is showing as
01/03/2005 00:00:00
instead of
01/03/2005
Why does this happen?
I have the following SQL:
select convert(datetime,'04-20-' + right(term,4)) as dt,
'Deposit' as type, a.* from
dbo.status_view a
where right(term,4) always returns a string which constitutes a 4 digit year eg '1999','2004',etc.
The SQL above returns
2004-04-20 00:00:00.000 Deposit ...
Which makes me think that it is able to successfully construct the datetime object inline. But then when I try and do:
select * from
(
select convert(datetime,'04-20-' + right(term,4)) as dt,
'Deposit' as type, a.* from
dbo.status_view a
) where dt >= a.submit_date
I get the following error:
Syntax error converting datetime from character string.
Given that it executes the innermost SQL just fine and seems to convert the string to a datetime object, I don't see why subsequently trying to USE that datetime object for something (in this case comparison with submit_date which is a datetime in the table a) should screw it up. Help!!! Thanks...
Hi,I have a text file that contains a date column. The text file will beimported to database in SQL 2000 server. After to be imported, I wantto convert the date column to date type.For ex. the text file look likeName dateSmith 20003112Jennifer 19991506It would be converted date column to ydm database in SQL 2000 server.In the table it should look like thisName DateSmith 2000.31.12Jennifer 1999.15.06Thanks in advance- Loi -
View 1 Replies View Related