Datetime Report Parameter Default Value
Jul 10, 2007
Issue 1:
I have a report parameter StartDateTime. I set the default value to Now(). When I go to preview, the StartDateTime parameter is empty and its been locked. I am not even able to set it to different value in preview.
Can anyone help me how to set the datetime parameter to default value(Now).
Issue 2:
I have a stored procedure which takes StartDateTime parameter. Whenever the report refreshes using autorefresh interval, the startdatetime should default to Now. Right now the startdatetime defaults to whatever the value is there before i hit view report. how to do that using stored procedure.
Thanks fro your help.
View 5 Replies
ADVERTISEMENT
May 21, 2008
I am trying to set the default date in my datetime parameter to yesterday's date, so the user does not have to select using the datepicker calendar. I am using Visual Studio 2005.
I put the following code into the Report Parameters non-queried default values function line, but it adds the timestamp to the date.
=DateAdd(€?d€?, -(WeekDay(Now()))+1, Now())
How can I get yesterday's date to default but without the timestamp?
Thanks!
Marissa
View 6 Replies
View Related
Jul 13, 2007
I have a visible DateTime parameter on the Report that I would like to make optional.
When I open up the report and try to run it without specifying the date I get a validation error that parameter is required. If I set default value to null - it works, but I have to check for both '' and NULL in my query:
StartDateTime >= @StartDate OR @StartDate='' OR @StartDate IS NULL
I tried setting default parameter using expression
=''
but I get an error that
'Default Value' of parameter 'StartDate' doesn't have expected time.
So the question is can I set DateTime parameters' default value to blank?
View 7 Replies
View Related
Jul 4, 2015
I have a report with datetime parameter which is required to be optional (there should be an option not to select this parameter which would cause in not narrowing result of this report by this parameter).
I used datetime parameter
@daTo (to have the calendar control for selecting date) and check on "Allow Null" value. Here is default Value.
I've also tried to set DefaultValue expression was "=Nothing". Â
IN my query of data set, here is the part I use the parameter @daTo
 ... Where (@daTo IS NULL OR TRUNC(@daTo) >= TRUNC(pe.start_time) ....
But when I run the report, I got below error:
ORA-00932: inconsistent datatypes: expected DATE got NUMBER
I think it @daTo value actually not null so it try to TRunc the value
I don't know how to set null value default in my report.
View 4 Replies
View Related
Dec 26, 2007
I have a report which has paramets as startdate and enddate. I want to set default value as yesterday. So when It opens it shows yesterday data.
I have a expression like this.
(DATEDIFF(dd, 0,MoneyFlowTransaction.ProcessedTime) = DATEDIFF(dd, 0, GETDATE()) - 1)
But I'm wondering how I set this as dafault value.
can anyone help me pls?
View 10 Replies
View Related
May 13, 2008
I have drop down Date Range(Last Month,Current Month and Custom)..
We need to set the values in our From Date Report Filter and To Date Report Filter.
We gave the Date Parameter Value in Condition to the Date Range Selected Value.
But the value always remain as on First Load of Report.
Is there any way i can set values in datetime text box..
.
View 1 Replies
View Related
Apr 16, 2007
I'm trying to set up a parameter report from a OLAP cube. I need 3 dynamic parameters(ThisYear, ThisMonth, YESTERDAY).
THISYEAR: =CStr(DatePart("yyyy",Today()))
THISWEEK: =CSTR(DATEPART("ww",Today()))
YESTERDAY: =CSTR(Datepart("d", Today().AddDays(-1)))
So far so good. I want to send this report by email everyday, so I need to set these parameters as a default value. This is where I run into problems.
When I add any of these parameters I get the following error "The restrictions by the CONSTRAINED flag in the STRTOSET function were violated". This problem occur when I choose NON-queried under Report->Report Parameters, and set a default value for THISYEAR under DEFAULT VALUES
=CStr(DatePart("yyyy",Today()))
Hope someone found a way around this problem.
Thanks in advance!
View 2 Replies
View Related
Jan 1, 2007
Dataset "FromTimeDimension" is a report parameter and has values (yyyymm)= 200601,200602,200603,2000604....... I would like to always have the default for this parameter to always be the latest month...ie November is the most recent month in our cube, so I would want the parameter to default to "200611". However, when I try to use the "last" function, the error says that aggregate function cannot be used.
View 3 Replies
View Related
Feb 28, 2007
I have a basic SSRS report against an SSAS database with a "start date" parameter. I want to set the default value of that date parameter to Today's date. What is the easiest way to do this? I have no problem doing it against a relational source, just haven't done it against an OLAP source.
Thanks for any ideas.
-Josh R.
View 1 Replies
View Related
Jan 26, 2007
Hi all,
Does sombody have experience on dynamically set or change the default value of a report parameter?
Assuming: report parameters p1, p2, p3, p4 have been set up(and have their default value 'all') with the creation of the report1; report browseing is through reportviewer that embedded in the web application; datasource is datacube
What I want to do: based on the login user of the my web application, set default value of p1 as the user's username.
What I did is:
Microsoft.Reporting.WebForms.ReportParameter reportParam = new Microsoft.Reporting.WebForms.ReportParameter("P1","Mary");
ReportViewer1.ServerReport.SetParameters(new Microsoft.Reporting.WebForms.ReportParameter []{ reportParam });
what I got when reveiw the report:
P1 has no default value, and p2, p3, p4 greyed and could not choose value from them.
Any idea and suggestion will be pre-appreciated!
Jone
View 1 Replies
View Related
Apr 2, 2007
I have a .net 2.0 web form with a report viewer control (RS 2005) and have hard coded the report server and path. The report has two date time parameters that have a default value set up. When the user clicks the calendar icon to change the date range, the page refreshes without displaying the calendar... I don't remeber having this problem in the past. The parameters function fine in Report Manager. Any idea what could be causing this?
View 1 Replies
View Related
May 7, 2012
I created a parameter with available values from a dataset.
By default i want it to display the maximum value. and then the user can select the dates if he does not like the default value.
How to i do this. because when i tried to set the paramter default value to max(dataset!dt.value) it says expression canot be used.
How to do this. Should I create a dataset with maximum value and then assign it to this one.
View 12 Replies
View Related
May 30, 2007
I have a report which will one day display some data from an analysis services cube. my first step is to create a drop down parameter enabling the user to choose the date. I'd like to display only dates that have data, and I'd like it to default to today.
So I've created a dataset that will be the datasource for the dropdown displaying the available non-empty dates, which works fine.
SELECT measures.turnover ON COLUMNS,
nonempty([TBL DIM DATE].[DATE_ONLY].[DATE_ONLY].ALLMEMBERS ) ON ROWS
FROM [Itdev1 Hk]
I've also set the report parameter up to be a queried paramter,and to use the above dataset as it source, with [DATE_ONLY] displayed. and [DATE_ONLY] as the value.
Now, how do I get it to default to the last valid member in the list?
View 6 Replies
View Related
Feb 22, 2007
Adding a value to a non-queried default report parameter value does not update on the target server after deployment.
To recreate
1. Create a report in Visual Studio and add a report parameter with the following properties:
Multi-value is checked
Available values = "From Query"
Dataset = [create a dataset that returns a table w/ a Id and Description column]
Value field = [the Id field from the table]
Label field=[the Description column from the table]
Default values = "Non-queried" (add several values the match the IDs from the table so that some of the values in the report dropdown will show up as checked when rendering the report)
2. Build and deploy the report to the reporting server. View the report and verify the specified items are checked in the report parameter.
3. Go back to Visual Studio and add a value to the Non-queried Default values.
4. Build and deploy the report again. View the report. The newly added item is not selected.
Notes
I verified that the newly added ID exists in the rdl file (as xml) on both the development box and the server where the report was deployed. However, when I view the report parameter using Management Studio (connect to the reporting server), the newly added value for the report parameter does not exist. I verified that changes are being deployed by adding new parameters and changing other properties of the parameter. I thought maybe the rdl itself was being cached somehow - I tried restarting IIS, SQL Server, and SQL Reporting services. None worked. Note that running the report on the development box by running the project through Visual Studio DOES reflect the change to the parameter.
Work-arounds
1. Create a dataset for the report that returns a table of the Ids that you want pre-selected. The query could be something like this:
SELECT '4' AS SelectedId
UNION
SELECT '5' AS SelectedId
UNION
SELECT '6' AS SelectedId
2. Delete the report in Management Studio, then redeploy.
I have issue w/ both workarounds because for 1) it is not intuitive and you have to remember to do this for every similar case, and 2) this extra step has to occur each time the report is deployed w/ changes to the report parameter.
View 8 Replies
View Related
Jul 13, 2007
All,
I have two reports in my project. One is summary and the other is drill through. In Summary report I have StartDate and EndDate Parameters which are DateTime type. Language settings on my workstation are set to Canadian English, and so are in the IE. When I deploy the reports to the Sharepoint WebParts based reporting portal, the reports run fine individually. However, when I try to drill through from summary report to the detail report, the following error is displayed, where the StartDate is 13/07/2007 (Canadian format dd/MM/yyyy):
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
Why do the reports run fine individually? Obviously something is wrong with Report Server processing the parameters, that it converts the date format to US English only when passing parameters to drill through report. This problem is eliminated when I change the language settings to US-English on my workstation.
Any ideas how can this be fixed, if at all? It would certainly be not feasible to have all the users change their settings from Canadian to US-English.
Thanks.
View 6 Replies
View Related
Dec 7, 2007
In my report I have two date parameters, both are of type DateTime.
The problem is that when the report is called for the first time the report parameter value is not shown in the expected format (de-DE, 01.01.2007) but in en-US 01/01/2007
Only when I change a Date using the calendar popup and click on the "show report" button, the right format will be taken over.
Language properties of the report are"=User!Language"
IE language is de-DE.
Report Server is a MS Windows Server 2003 R2 Standart Edition SP2
with MS SQL SERVER 2005 SP2
P.S.
on a server with MS SQL SERVER 2005 SP1, this report works fine.
may be this bug is a new feature of SP2?
View 13 Replies
View Related
Jan 23, 2007
Hi,
How can we validate the
input values from user for a datetime
type report parameter?
i.e. Validating whether
the date is correct and in required
format.
Thanks in
Advance.
Ramesh
KS
View 1 Replies
View Related
May 12, 2010
I have a parameter that chooses its available items from a query (with a label and a value column). I set the default for the parameter to the a particular value.
It works in Preview from design mode, but when I deploy it and run the report, it does not set the default.
View 5 Replies
View Related
Apr 11, 2008
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
View 1 Replies
View Related
Aug 11, 2015
@pvColumnName  VARCHAR(100) = Default,  
However, I am unable to determine what is the value for Default. Is it '' ?
Default is not permitted as a constant - below fails to parse:
WHERE t2.TABLE_TYPE = 'BASE TABLE'
AND (@pvColumnName = Default OR t1.[COLUMN_NAME] Like @vColumnName)
View 4 Replies
View Related
Jan 30, 2007
Hi,
I need "conditional" cascading parameters: In Report Manager when one changes parameter 1, parameter 2 get changed based on parameter 1. Optionally, one can also enter values to parameter 2 directly.
I was able to achieve this in SSRS 2000 (SP2) with the following setups. SSRS 2005 and SP1 no longer works - Parameter 2 always shows its default value regardless whether one select a value in Parameter 1 or not.
Parameter 1
available values: from query
default values: non query (specify a value "<None>")
Parameter 2
available values: Non query (no value specified)
default values: from query (based on Parameter 1)
It seems to me that the default value in SSRS 2000 is considered as cascading parameter. But it is no longer the case in SSRS 2005.
Is this a SSRS 2005 bug? is there any other work arounds or suggestions?
Thanks.
Kong
View 6 Replies
View Related
Oct 15, 2007
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
View 7 Replies
View Related
Jan 13, 2014
I want to set the default parameters for a function. I;d like to set the date start date to current date and end date for the last 90 days. how to make this work?
Create Function HR.Equipment
(
@startdate Date =(Convert(Date,DATEADD(DAY,-1,GETDATE())),
@enddate Date = (Convert(Date,@StartDate-90)
)
RETURNS TABLE AS RETURN
(
SELECT
EquipID,
EmpName,
IssueDate
FROM HR.Equipment
WHERE IssueDate <=@StartDate and IssueDate >=@EndDate
)
GO
View 5 Replies
View Related
Apr 21, 2008
Is it possible to include a text/string as suffix(append to the end of textbox) to an report parameter prompt string ? Something like this
Enter Date: [ Textbox ] format:mm/dd/yyyy
Enter Age:[Textbox ] e.g 50
I need to include text like the one that I have highlighted in blue. Could someone help me out?
View 7 Replies
View Related
Jul 24, 2007
I have a dataset listing distinct values for items (like 1, D10, M4, etc.) The WHERE statement in my query refers to unit IN(@Unit). I then have 2 report parameters to select 1) a date (datetime); and 2) a multivalue parameter to select one or all of the "units". I would like the second parameter to default to "Select All". Can someone tell me how to do this? I'm sure this is a fairly simple thing but I am really struggling. The report parameter is set as multivalue; My "available values" is set to "from query" and refers to my "unit" dataset and the value and label fields are set to "unit" (only field I bring into this particular dataset). The "Default Values" section is set to "from query" , the dataset is set to "unit" and the value is set to "unit". I can preview the report and select a date but the list of units comes up with all boxes unchecked, including "Select All". Any help will be much appreciated. Thanks.
View 11 Replies
View Related
Jan 9, 2007
Request is to have a Requirement number from the requirement form generate a report in Reporting Services with the requirement number as a filter.
I can set up the parameter - how does the value get there? Should I be asking this question in the Visual C# group?
Thanks!
Terry B
View 1 Replies
View Related
Dec 29, 2006
How could one assign a datetime default value in SQL Server 2005?
and how could one assign a composite key in SQL Server? an anyone help?
View 2 Replies
View Related
Dec 27, 2005
hi, i was wondering how to set default value in the datetime column of the database so that it will enter current date and time if one is not provided when a row is populated. is there a store procedure to do this? or built-in function?
mp
View 3 Replies
View Related
Jul 6, 2004
Hello,
Can I simply set the default value of a dateTime field with the date and time that the record was created?
View 2 Replies
View Related
Jul 6, 2007
Hi All,
i have a table as below
create table temp
(
Number int,
DateError datetime
);
insert into temp values(13,' ');
i get
Number DateError
------------------
13 1900-01-01 00:00:00.000
Now, i want "1900-01-01 00:00:00.000" and just want NULL or blank and ofcourse not 1900-01-01 00:00:00.000 for my further processing.
I have a problem, i have to formath string send it as second value which is simple ' '.
How can i modify my Table definition above to achieve this.
Thanks in advance.
View 10 Replies
View Related
Mar 21, 2007
hi friends,
i have two datetime parameters in my report ... based on these parameters , am searching records ... the issue is i cant get the full datetime value
for example
i am searching records based on 03/16/2007 and 03/20/2007... i can't the records for the date 03/20/2007...
bcoz, the value of the date is '03/20/2007 00:00:00.000'
i want to get the value like this ' 03/20/2007 11:59:59 pm''
can any one help me
View 6 Replies
View Related
Oct 6, 2006
I try to set a default value (getdate()) for a datetime culomn in sql mobile,
but got error when i insert record:
there was a syntax error in the date format. [expression = getdate()]
may be I can only set a exict date ?
View 7 Replies
View Related
May 25, 2004
In SQL Server 2000 / Asp.Net I am trying to use default values for all fields; hoping to eliminate nulls.
For number and character fields, the default is pretty obvious, but is there any empty value for a date field? I think a null there might be better than putting in a bogus date, at least it can be tested for.
Are there any more developend ideas on this question?
Many thanks
Mike Thomas
View 1 Replies
View Related
