Db In Loading Status After Restore
Apr 10, 2002
I performed a database restore this morning from a backup that I had
created yesterday - the database was backed up to a file, not a backup
device.
After the restore completed, the database was left in a LOADING status. I
checked the log and it stated 'Bypassing recovery for database X because
it is marked in load. I used the enterprise tools (all tasks/restore
database) to do the restore.
I asked one of our senior dba's for help, and he followed the same process
I did and it worked fine for him.
Any idea why my database was left in a loading status? The database was
fine prior to the restore.
View 1 Replies
ADVERTISEMENT
Sep 21, 2000
How does one correctly go about restoring the MSDB database?
How/what should I do with the status (loading)?
I have a good backup of the MSDB.
Any help will be appreciated.
View 2 Replies
View Related
Dec 17, 2001
I Restored the database from Backup with a Different database Name. I got a message the Restore Database was successful. Still the database has Loading Status. Can you let me know what I have to take that status.
View 1 Replies
View Related
Jun 18, 2007
I asked this question before but never received a decent answer. When a restore fails, what are the steps to re-start the restore? This should be a very common issue and for the life of me I have been unable to find it in BOL or the MS site! Please let me in on the secret!!
Thanks
View 3 Replies
View Related
Jul 23, 2005
HiI am trying to copy a 20 GB database from server 1 to 2. I took a fullbackup, copied to server2 and restored ( ready for use) using EM.After the message restore completed, I see the database's status as LOADING.We are on Sql Server 2000 (8.00.818) on Windows 2000 Adv Servers.I ran dbcc on the source DB and it returned no errors. I tried the command'restore db with recovery ' which didnot help. I get an message saying thatthe data file is only partially restored.. It seems the last resort is tochange the status in system tables.Any ideas?ThanksRagu
View 13 Replies
View Related
Apr 23, 2007
Hi,
we have a reporting database that needs to be refreshed every week. I normally get a big backup file (50GB) from our business partner very Sunday morning; I have setup a job to restore the database once I got the backup file. The restore job normally will take about 4 or 5 hours to finish, but sometime it may take much longer (more than 10 hours). We knew there is some kind of disk storage contention going on the SAN. When this problem happens the system guy always try to pick my db restore process to be the victim. I hate to kill a job when it has 90% done, but I have no way to tell the restore progress status. Does someone know if I can query database restore progress information from any DMVs?
Thank you for your help in advance.
David Zhang
View 3 Replies
View Related
Dec 22, 2004
I recently installed MSDE on a laptop. I then restored several databases from backup files without problem. However, one database is constantly stuck at the grey colour displaying the (Loading) message.
Why won't this database restore ? It is of course the most important database and I only have the one backup file.
This only appears to fail on his server. Do I need to uninstall MSDE and start over ?
View 5 Replies
View Related
Sep 17, 2004
I had to restore a database late this afternoon. I have the database set to FULL recovery. Database backups are performed nightly and transaction log backups are performed every other hour. I decided to perform a point-in-time restore. When I restored this way everything seems to go ok and it finishes. Then the database is grayed and says "Loading". Although I tried 4 separate times, one time allowing over an hour, the grayed out database and "Loading" never goes away.
Freaking out I deleted the "Loading" database (didn't delete logs and backup files) and tried a manual restore from the previous night's backup file. It attached and restored properly and was ready to go in 2 minutes.
Of course I wanted to get the transaction log files restored too, since it had work from earlier today. So I tried another restore via point-in-time and got the same old messages. Currently, the database is running with the previous night's backup restored but the users aren't too keen on having to do 5 hours worth of work to catch up to the previous transaction log backup come Monday morning.
Any suggestions?
Thanks,
JB
View 2 Replies
View Related
Jun 15, 2004
I can run this example from SQL Book Online from sql query analyzer. I can build the TestDB database.
BACKUP DATABASE Northwind
TO DISK = 'c:Northwind.bak'
RESTORE FILELISTONLY
FROM DISK = 'c:Northwind.bak'
RESTORE DATABASE TestDB
FROM DISK = 'c:Northwind.bak'
WITH MOVE 'Northwind' TO 'c: est estdb.mdf',
MOVE 'Northwind_log' TO 'c: est estdb.ldf'
GO
But... When I build stored procedure and call it through VB6. I've got the gray database symbol along with message TestDB (Loading/Suspecting)
Why I cannot run these commands through VB6
View 1 Replies
View Related
Jan 7, 2008
Hi Experts,
I am extracting data from SQL Server 2005 to flat file destination. I am using SQL Command to specify the data selection query. One of my query uses Replicate function to derive a column value. When I execute this package it fails with the error "Data conversion failed. The data conversion for column "value" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page".
The reason for the problem is that, it is taking the InputColumnWidth of the flat file destination as 8000 and I specified the OutputColumnWidth as 4.
If I change the OutputColumnWidth to 8000, it is working without any error but resulting in the column width of 8000.
I tried using DerivedColumn Transformation's Type cast and DataConversion Transformation but still I am getting the same error in the respective Transformation components.
Can anyone suggest how to solve this issue.
View 11 Replies
View Related
May 3, 2005
Returning "completed" when status = 1 and "not completed when status = 0
View 3 Replies
View Related
Oct 29, 2015
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies
View Related
Dec 31, 2014
In Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
View 6 Replies
View Related
Jun 25, 2015
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
View 4 Replies
View Related
Jun 30, 2006
Hello,
Would some one please help me with the syntex on how to run "restore filelistonly" or restore verifyonly" on a SQL backup which has multiple filesets?? My backups locations are as follow:
RESTORE VERIFYONLY
From disk = 'E:syndicated_databank__bkup_01.bak',
'E:syndicated_databank__bkup_02.bak',
€˜E:syndicated_databank__bkup_03.bak€™,
€˜E:syndicated_databank__bkup_04.bak€™, €˜E:syndicated_databank__bkup_05.bak€™
I tried to do a restore with the above, I got error The label 'E' has already been declared. Label names must be unique within a query batch or stored procedure.
Please advise!!
View 3 Replies
View Related
Apr 27, 2007
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
View 4 Replies
View Related
Aug 28, 2002
SQL7, sp3, NT4...
Unless I grant a developer "system admin" role, they are unable to see whether or not any job *not* owned by themselves is running?
EX: Developer A can't see whether Developer B's job is executing? Why? I've granted them both db_owner in msdb, and all permissions possible in msdb. Is there an extended sp I can look for?
Thanks,
View 1 Replies
View Related
Mar 4, 2004
Hi Gurus,
can any one help me to get the job status of a sql job.
My requirement is as under
ordinary user (not SA) will query pass job name as argument to stored procedure and sp has to give me the job status.
Thanks in advance
View 1 Replies
View Related
Jul 23, 2005
I have a table with columns c1, c2, c3, c4.if all nulls or blanks. Status = 0if c1 assigned but no c2, c3, and c4, then status = 1if c2 assigned but no c3 and c4, then status = 2if c3 .. then ..if c4 .. then ..I want to have one SQL to get the status like (ignored checking forblanks here for demo)SELECT Status = (if not c4 is null then 4else not c3 is null then 3else not c2 is null then 2else not c1 is null then 1else 0)FROM mytable.Thought of using CASE ... WHEN ... but it is only on one colum.Any better idea.ThanksJohn
View 1 Replies
View Related
Sep 25, 2006
In SQL 2000, go to Management, than Jobs, you will see a list of all jobs and their running status. I would like to programmatically display the same on my web page. I can call sysjobs table to get the jobs and use sysjobschedules to determine whether it's been scheduled or not. Then use sysjobhistory to obtain their running history. But how and where do I get the Next Run Date information? Is this calculated or stored somewhere?Can anyone give me some help on how to work with sysjobs, sysjobschedules, and sysjobhistory tables? All I am trying to do is to build a web-based app that does the same thing as the Enterprise Manager is doing - create and schedule a job, and monitor the job status.Thanks a lot!Penn
View 1 Replies
View Related
Sep 1, 2007
Hi all - am having trouble working out what would be the best way to do this (most efficient)I have written an order, despatch and accounts system. To get a list of orders ready for despatch, I have written a query which calculates the amount of items ordered against the amount of items despatched from that order. If there are any outstanding items, then this order is in the list of orders which are outstanding for despatch.
I am having trouble working out how to go about creating a list of orders ready do be invoiced... Orders that are ready to be invoiced can be completely despatched orders or part despatched orders. That is to say that if an order is only half despatched, my client still wants to be able to raise an invoice against that part of the order. I envisage creating a query which checks my orderline table to see if the item has been invoiced and creating the list from there. But as the application is used more and more, this query will take longer to run? ANy ideas?
Thanks.
Steve.
View 1 Replies
View Related
Jul 9, 2001
Hello,
Can anyone guide me to monitor whether Production Sql server is up and running and would e-mail or page me if by chance it has stopped.
Any help is appreciated.
Thanks.
Priti
View 5 Replies
View Related
Jun 24, 2000
is there any way to make the status of a package execution to be success without caring about failure of certain steps in the package?
View 1 Replies
View Related
Sep 26, 2002
I need to know the meaning of the status bit in sysdatabases because BOL only reports some of them.
For SQL 7.0 SP1 I have some database with a status bit equal to 0 (zero) and equal to 12.
For SQL 2000 SP2 I have some database with a status bit equal to 0 (zero),24,20 and 1073741840.
So I would really appreciate if someone can explain the meaning of these status bits.
Thank you very much.
Franco
View 2 Replies
View Related
Apr 14, 2003
Hi,
Is there any way to update the status bar in Query Analyzer.
Suppose I am running a script which updates data to a file. I want to know the status showing the percentage it completed.
Thanks
:confused:
View 1 Replies
View Related
Jun 8, 2007
I just started working with MS SQL. I'm attempting to find the equivalent of the MySQL commands STATUS and SHOW STATUS.
Essentially, I want to connect to the database from a .net app, check the status, such as how many connections, table locks, errors, etc... and display that information on my application.
Any recommendations?
View 5 Replies
View Related
Jun 27, 2004
I have a question I hope someone can help me with.
My situation:
I have a single-step job in SQL Server, which runs a stored procedure, A. This stored procedure invokes another stored procedure, B. In B, one of the statements is a 'BACKUP DATABASE' command, and a database is backed up to a file.
The job is started by an application. Once started, the application then uses the SQL-DMO property CurrentRunStatus to periodically check the status of the job. When the property returns the value SQLDMOJobExecution_Idle (indicating the job has completed), the application code then continues processing, and attempts to access the .dat file produced by the 'BACKUP DATABASE' command.
My problem:
On occasion, the application will hit the problem where either the backup file cannot be located, or the file is still being locked by another process (Error=The process cannot access the file because it is being used by another process).
Is anyone able to shed some light on this?
I assume that the job will only return a completed status after:
(a) both A and B have completed execution, and
(b) the BACKUP operation has completed
Is it possible that even though SQL Server indicates the job has finished, that the BACKUP operation still hasn't completely ended?
Thanks for any help,
Andrew
View 2 Replies
View Related
Mar 27, 2008
Hi
My boss and I have recently started designing a new database, and we've got into a bit of a debate about creating status tables (e.g. order statuses).
It was my intial instinct to create a separate table for each kind of status (e.g. an OrderStatuses table, a JobStatuses table, etc), however my boss wanted to create one table containing all the statuses, with an extra field for defining what kind of status it is.
I was just wondering what others thought was the best approach.
Thanks
Tom
View 5 Replies
View Related
Jun 3, 2008
Hi Gurus,
While iam connecting to servers through management studio iam facing
iam seeing like few servers are connected with Green colour (like>)and few are connected with circle as white.Frm these how can i decide the server status.
Is there any comand to view server status ?
Thanks,
ServerTeam
View 3 Replies
View Related
Jun 5, 2008
Hello All,
Can someone help me with this query?
I have the following table and data structure
Table1: Orders
Field1: OrderID
Table2: OrderStatus
Field1: OrderStatusID
FIeld2: OrderID
Field3: StatusID
Field4: InsertDate
Sample Data:
Table1:
11
12
Table2:
1,11,1,6/1/2008
2,12,1,6/1/2008
3,11,2,6/2/2008
4,12,2,6/2/2008
5,11,3,6/3/2008
6,11,4,6/4/2008
Wanted Results:
11,4,6/4/2008
12,2,6/2/2008
View 3 Replies
View Related
Jul 16, 2013
How can i exclude those with more than one status? i tried using rows but it seems doesn't work.
ID status
1 new
1 new
1 close
2 new
2 close
3 close
3 close
4 new
4 close
the result should appear as:
ID status
2 new
2 close
4 new
4 close
View 4 Replies
View Related
Mar 7, 2015
I have a table of status_Master where the details are maintained by street name with status but I need the result of total count by each status against the street name.
Status_Master
Sl NoStreetNameStatus
1       Delhi        Pending
2       Delhi        Working
3       Delhi        Working
4       Mumbai        Pending
5       Mumbai        Pending
6       Delhi        Working
7       Delhi        Problem
8       Mumbai        Working
9       Mumbai        Problem
50Â Â Â Â Â Â Â . Â Â Â Â Â Â Â .
100       .       .
200       .       .
Result as below
StreetNameWorkingPendingProblem
Delhi              3           1           1
Mumbai          1           2           1
View 2 Replies
View Related
May 12, 2006
table1 has 3 fields:
bookNumber
123
234
345
status -- status defaul value is 0
partnerNumber
1
2
3
table 2 has 2 fields
bookNumber
234
345
567
789
partnerNumber
1
2
3
4
A stored procedure named remove_books, which remove books if the conditions are true.
If stored procedure is executed. That means, it removes the bookNumbers from table2 if the conditions are true. Lets say it removes 234 from table2
then
do update in table1 status = 1 for BookNumber 234.
View 19 Replies
View Related
