which one is smarter, where there is no indexing on the table which is really simple table delete everything or recreate table. I got an argument with one of my coworker. He says it doesnt matter i say do delete. Any opinions.
View 7 RepliesFor reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.
View 6 Replies View RelatedI want to get rid of a huge table. DELETE FROM would take for-freaking-ever, so I was thinking of doing DROP TABLE. Would this be any faster?
If not, would doing a TRUNCATE TABLE and then DROP TABLE be fast? What's the best way to nuke a big table?
Thanks.
What kind of problems may I see if a process drop and re-create a set of tables every night?
Hello,
What's the command for dropping an existing Foreign key on a table and reacreating it in SQL Server 6.5
Thanks
Sri
Hi,
I had a question and did not obtain an answer. So I am trying to rephrase and ask again, in case I was not clear the first time.
When we drop and recreate a table, do we always have to recompile the stored procedures that reference the table? Or is only under certain scenarios that we need to do so- like if an index on the table is changed
Please let me know
Thanks in advance
Kiran
Hi all,
I have 2 questions:
1. How can I drop /remove a complete db from MSDE desktop engine?
2. After exporting my db onto MSDE server and get connected those db tables in FE (adp), how can I create a new table in the same back end db?
I know these are basic questions but since I am new to MSDE I hope the forum would bear me.
With kind regards,
Ashfaque
Hi,
How can i create and drop table in MS SQL Server 2000 via VB6? I think I should use ADOX object, but I don't know exactly how....
The following code uses ADO connection object and returns with runtime error "incorrect syntax near AS":
Dim db as ADODB.Connection
'... open connection to database
Dim strCmd As String
strCmd = "CREATE TABLE tmp_tbl AS SELECT * FROM tbl"
db.Execute strCmd
Thank you in advance
How do I allow a user (or group of users) permission to create/drop a table?
I have found the 'GRANT CREATE TABLE TO username' command, which will (I assume) allow a user to create a table, but how to I allow a user to 'DROP' the created table as well?
'GRANT DROP TABLE TO username' doesn't work?
and I want the users to be able to DROP/DELETE this table (temporary table created just for printing purposes) as well.
thanks
Hi seniors
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
regards
Ahmad Drshen
hai,
i want to create a table in a existing database in sql and i have to move data to the table and after my process i have to delete it .This is should be done thro codings.please help me.
Thanks in advance
Viswa
'****************************************************************************
Cmd.CommandText = "Drop Table Raj"
Cmd.ExecuteNonQuery()
Cmd.CommandText = "Select * Into Raj From XXX"
Cmd.ExecuteNonQuery()
'**************************************************************************
This generates error that Table already exist.
If Wait 1 sec then execute statement then it works fine.
Thanks in Advance
Piyush Verma
Hi,I found this SQL in the news group to drop indexs in a table. I need ascript that will drop all indexes in all user tables of a givendatabase:DECLARE @indexName NVARCHAR(128)DECLARE @dropIndexSql NVARCHAR(4000)DECLARE tableIndexes CURSOR FORSELECT name FROM sysindexesWHERE id = OBJECT_ID(N'F_BI_Registration_Tracking_Summary')AND indid 0AND indid < 255AND INDEXPROPERTY(id, name, 'IsStatistics') = 0OPEN tableIndexesFETCH NEXT FROM tableIndexes INTO @indexNameWHILE @@fetch_status = 0BEGINSET @dropIndexSql = N' DROP INDEXF_BI_Registration_Tracking_Summary.' + @indexNameEXEC sp_executesql @dropIndexSqlFETCH NEXT FROM tableIndexes INTO @indexNameENDCLOSE tableIndexesDEALLOCATE tableIndexesTIARob
View 2 Replies View Relatedwhich is more efficient...which takes less memory...how is the memory allocation done for both the types.
View 1 Replies View RelatedHi thanks for looking at my question
Using sqlServer management studio 2005
My Tables are something like this:
--Table 1 "Employee"
CREATE TABLE [MyCompany].[Employee](
[EmployeeGID] [int] IDENTITY(1,1) NOT NULL,
[BranchFID] [int] NOT NULL,
[FirstName] [varchar](50) NOT NULL,
[MiddleName] [varchar](50) NOT NULL,
[LastName] [varchar](50) NOT NULL,
CONSTRAINT [PK_Employee] PRIMARY KEY CLUSTERED
(
[EmployeeGID]
)
GO
ALTER TABLE [MyCompany].[Employee]
WITH CHECK ADD CONSTRAINT [FK_Employee_BranchFID]
FOREIGN KEY([BranchFID])
REFERENCES [myCompany].[Branch] ([BranchGID])
GO
ALTER TABLE [MyCompany].[Employee] CHECK CONSTRAINT [FK_Employee_BranchFID]
-- Table 2 "Branch"
CREATE TABLE [Mycompany].[Branch](
[BranchGID] [int] IDENTITY(1,1) NOT NULL,
[BranchName] [varchar](50) NOT NULL,
[City] [varchar](50) NOT NULL,
[ManagerFID] [int] NOT NULL,
CONSTRAINT [PK_Branch] PRIMARY KEY CLUSTERED
(
[BranchGID]
)
GO
ALTER TABLE [MyCompany].[Branch]
WITH CHECK ADD CONSTRAINT [FK_Branch_ManagerFID]
FOREIGN KEY([ManagerFID])
REFERENCES [MyCompany].[Employee] ([EmployeeGID])
GO
ALTER TABLE [MyCompany].[Branch]
CHECK CONSTRAINT [FK_Branch_ManagerFID]
--Foreign IDs = FID
--generated IDs = GID
Then I try a simple single row DELETE
DELETE FROM MyCompany.Employee
WHERE EmployeeGID= 39
Well this might look like a very basic error:
I get this Error after trying to delete something from Table €śEmployee€?
The DELETE statement conflicted with the
REFERENCE constraint "FK_Branch_ManagerFID".
The conflict occurred in database "MyDatabase",
table "myCompany.Branch", column 'ManagerFID'.
Yes what I€™ve been doing is to deactivate the foreign key constraint, in both tables when performing these kinds of operations, same thing if I try to delete a €śBranch€? entry, basically each entry in €śbranch€? and €śEmployee€? is child of each other which makes things more complicated.
My question is, is there a simple way to overcome this obstacle without having to deactivate the foreign key constraints every time or a good way to prevent this from happening in the first place? Is this when I have to use €śON DELETE CASCADE€? or something?
Thanks
I have two tables that are related by keys. For instance,Table employee {last_name char(40) not null,first_name char(40) not null,department_name char(40) not null,age int not null,...}Employee table has a primary key (combination of last_name and first_name).Table address {last_name char(40) not null,first_name char(40) not null,street char(200) not null,city char(100) not null,...}Address table has a primary key (combination of last_name, first_name andstreet in which (last_name, first_name) reference (last_name, first_name) inemployee table.Now I want to delete some rows in Address table based on department_name inEmployee table. What is sql for this delete?I appreciate your help. Please ignore table design and I just use it for myproblem illustration.Jim
View 1 Replies View RelatedI am trying to get some information to compare and contrast theTruncate Table function and the Drop Table function. I know thatusing Truncate Table is faster and saves the structure of the tablewhile the Drop Table will delete the table totally (data andstructure). My question is whether using one function over the otherwill use up more capacity on the server?Ed
View 2 Replies View RelatedI need to delete records from a table (Table1) which has a foreign key column in a related table (Table2).
Table1 columns are: table1Id; Name. Table2 columns include Table2.table1Id which is the foreign key to Table1.
What is the syntax to delete records from Table1 using Table1.Name='some name' and remove any records in Table2 that have Table2.table1Id equal to Table1.table1Id?
I have contract table which has built in foreign key constrains. How can I alter this table for delete/ update cascade without recreating the table so whenever studentId/ contactId is modified, the change is effected to the contract table.
Thanks
************************************************** ******
Contract table DDL is
create table contract(
contractNum int identity(1,1) primary key,
contractDate smalldatetime not null,
tuition money not null,
studentId char(4) not null foreign key references student (studentId),
contactId int not null foreign key references contact (contactId)
);
I need to delete all records in the TBL_PCL_LENS_DATA table that do not have a corresponding record in the TBL_VERIFICATION table.
Primary Table: TBL_PCL_LENS_DATA
PK: Serial Number
PK: ProcessedDateTime
Child Table: TBL_VERIFICATION
PK: Serial Number
Thanks,
Sean
I have one table that has unique id's associated with each row of information. I want to delete rows of information in one table that have a unique ID that references information in another table.
Here is a basic breakdown of what I am trying to do:
Table1 (the table where the rows need to be deleted from)
Column_x (Holds the id that is unique to the various rows of data - User ID)
Table2 (Holds the user information & has the associated ID)
Column_z (holds the User ID)
I tried this on a test set of tables and could not get it to work. What I am trying to do is skip all rows of Table1 that have ID's present in Table2, and delete the rows of ID's that are not present in Table2.
Code:
SELECT Column_z
FROM dbo.Table2
DELETE FROM dbo.Table1
WHERE Column_z <> Column_x
This did not seem to do what I needed, it did not delete any rows at all.
I wanted it to delete all rows in Table1 that did not have a reference to a user ID that matched any ID's in Column_z of Table2
Then I tried another scenerio that I also needed to do:
Code:
SELECT Column_z, Column_a
FROM dbo.Table2
DELETE FROM dbo.Table1
WHERE Column_z = Column_x AND Column_a='0'
'0' being the user id is inactive so I wanted to delete rows in Table1 and remove all references to users that were in an inactive status in Table2.
Neither one of the Queries wanted to work for me in the Query Analyzer when I ran them. It just said (0) rows affected.
Any ideas on what I am doing wrong here?
I have this table:
with actividades_secundarias as (
select a.*, r.Antigo, r.Novo, rn = row_number()
over (PARTITION BY a.nif_antigo, r.novo ORDER BY a.nif_antigo)
from ACT_SECUNDARIAS a inner join
((select
[Code] ....
I want to make a delete statement like this:
select * into #table1 from actvidades_secundarias where rn>1
Delete from act_secundarias where act_secundarias.nif_antigo = #table1.nif_antigo and act_secundarias.cod_cae = #table1.cod_cae
But it seems that I cant delete like this.
Hello all,
Please help....
I have a text file which needs to be created into a table (let's call it DataFile table). For now I'm just doing the manual DTS to import the txt into SQL server to create the table, which works. But here's my problem....
I need to extract data from DataFile table, here's my query:
select * from dbo.DataFile
where DF_SC_Case_Nbr not like '0000%';
Then I need to create a new table for the extracted data, let's call it ExtractedDataFile. But I don't know how to create a new table and insert the data I selected above into the new one.
Also, can the extraction and the creation of new table be done in just one stored procedure? or is there any other way of doing all this (including the importation of the text file)?
Any help would be highly appreciated.
Thanks in advance.
A table was created in version 6.5 that has 2 blank spaces and a slash '/' in it's name (i.e. Item Type w/Groups). This was done in error and now the table cannot be dropped or renamed and dropped.
Does anyone know how I can delete this table? Please let me know.
SQLLY challenged be gentle --Trying to create code that will drop a table using a variable as theTable Name.DECLARE @testname as char(50)SELECT @testname = 'CO_Line_of_Business_' +SUBSTRING(CAST(CD_LAST_EOM_DATEAS varchar), 5, 2) + '_' + LEFT(CAST(CD_LAST_EOM_DATE AS varchar),4)+ '_' + 'EOM'FROM TableNamePrint @testname = 'blah...blah...blah' (which is the actual tablename on the server)How can I use this variable (@testname) to drop the table? Undersevere time constraints so any help would be greatly appreciated.
View 2 Replies View RelatedHello:
Need some serious help with this one...
Background:
Am working on completing an ORM that can not only handles CRUD actions -- but that can also updates the structure of a table transparently when the class defs change. Reason for this is that I can't get the SQL scripts that would work for updating a software on SqlServer to be portable to other DBMS systems. Doing it by code, rather than SQL batch has a chance of making cross-platform, updateable, software...
Anyway, because it needs to be cross-DBMS capable, the constraints are that the system used must work for the lowest common denominator....ie, a 'recipe' of steps that will work on all DBMS's.
The Problem:
There might be simpler ways to do this with SqlServer (all ears :-) - just in case I can't make it cross platform right now) but, with simplistic DBMS's (SqlLite, etc) there is no way to ALTER table once formed: one has to COPY the Table to a new TMP name, adding a Column in the process, then delete the original, then rename the TMP to the original name.
This appears possible in SqlServer too --...as long as there are no CASCADE operations.
Truncate table doesn't seem to be the solution, nor drop, as they all seem to trigger a Cascade delete in the Foreign Table.
So -- please correct me if I am wrong here -- it appears that the operations would be
along the lines of:
a) Remove the Foreign Key references
b) Copy the table structure, and make a new temp table, adding the column
c) Copy the data over
d) Add the FK relations, that used to be in the first table, to the new table
e) Delete the original
f) Done?
The questions are:
a) How does one alter a table to REMOVE the Foreign Key References part, if it has no 'name'.
b) Anyone know of a good clean way to get, and save these constraints to reapply them to the new table. Hopefully with some cross platform ADO.NET solution? GetSchema etc appears to me to be very dbms dependant?
c) ANY and all tips on things I might run into later that I have not mentioned, are also greatly appreciated.
Thanks!
Sky
I'm trying to clean up a database design and I'm in a situation to where two tables need a FK but since it didn't exist before there are orphaned records.
Tables are:
Brokers and it's PK is BID
The 2nd table is Broker_Rates which also has a BID table.
I'm trying to figure out a t-sql statement that will parse through all the recrods in the Broker_Rates table and delete the record if there isn't a match for the BID record in the brokers table.
I know this isn't correct syntax but should hopefully clear up what I'm asking
DELETE FROM Broker_Rates
WHERE (Broker_Rates.BID <> Broker.BID)
Thanks
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
Hi all,
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
I’ve got a situation where the columns in a table we’re grabbing from a source database keep changing as we need more information from that database. As new columns are added to the source table, I would like to dynamically look for those new columns and add them to our local database’s schema if new ones exist. We’re dropping and creating our target db table each time right now based on a pre-defined known schema, but what we really want is to drop and recreate it based on a dynamic schema, and then import all of the records from the source table to ours.It looks like a starting point might be EXEC sp_columns_rowset 'tablename' and then creating some kind of dynamic SQL statement based on that. However, I'm hoping someone might have a resource that already handles this that they might be able to steer me towards.Sincerely,
Bryan Ax
I would like to create a table valued function that fetch through the table below using a cursor and return the records that are unique
EmpidChDateSiteuseridinitsal finsalNote
-------------------------------------------- ----------
236102015-4-21 22:02:10.8072570 0.696176161 change inisal value
236112015-4-21 22:02:11.0502570 0.696176161change inisal value
236122015-4-21 22:02:11.1202570 0.696176161 change inisal value
236132015-4-21 22:02:11.2452570 0.696176161change inisal value
I would like to create a procedure which create views by taking parameters the table name and a field value (@Dist).
However I still receive the must declare the scalar variable "@Dist" error message although I use .sp_executesql for executing the particularized query.
Below code.
ALTER Procedure [dbo].[sp_ViewCreate]
/* Input Parameters */
@TableName Varchar(20),
@Dist Varchar(20)
AS
Declare @SQLQuery AS NVarchar(4000)
Declare @ParamDefinition AS NVarchar(2000)
[code]....
convert my table(like picture) to hierarchical structure in SQL. actually i want to make a table from my data in SQL for a TreeList control datasource in VB.net application directly.
ProjectID is 1st Parent
Type_1 is 2nd Parent
Type_2 is 3rd Parent
Type_3 is 4ed Parent