Deleting Orphaned Data - Maintenance
Dec 10, 2007
Hi,
I really don't know how frowned upon my approach is here, but it was the only way I have been able I've been able to do it.
On my application, when users delete their account, it sometimes brings the db server to a COMPLETE crawl. The reason is some users who delete have many years of related data, and when the data deletes with them, its very slow.
To avoid this I've taken off many contstraints, and I do have some sprocs that deleted orphaned data at night.
thoughts on this approach ?
View 5 Replies
ADVERTISEMENT
Apr 3, 2006
We have our Maintenance routines set up to delete files older that one week, but it is not working...
...Consequently, we forget to go out and remove the files manually, thus we lose backups due to the drive being full and have to manually remove files, then backup the databases and start all over again.
Has anybody had this problem and can you tell me where to look to try and figure out what the problem is ??
Thanks in advance,
Nancy
View 6 Replies
View Related
May 29, 2007
Hi,
I am not able to delete the Legacy maintenance plans created:
for example I created a maintenance plan: "MyPlan" with:
master.dbo.xp_sqlmaint
and the plan created at:
ManagementLegacyDatabase Maintenance PlansMyPlan
After this I tryed to delete this using SQL Server Management Studio, it is
deleted (right click on the plan and select delete menu item)
But when I refresh the server, the "MyPlan" is back again.
Any idea how to delete Legacy Maintenance plans?
Thanks,
Venkat
View 4 Replies
View Related
Jan 31, 2007
I'm the dba for a large company and have setup many maintenance plans for our sql servers. One of the options I have set is to delete old backups of databases and transaction logs after 2 days. For some reason, the old database backups are being deleted, but the old transaction logs backups are not. I have them being put in the same directory. Anybody have any ideas why this is happening and what if any fix is available?
View 1 Replies
View Related
Apr 25, 2001
I have a maintenance plan set to back up my 2 primary databases, one about 1 GB, the other about 2GB. I have about 4 GB available on the back up drive. I have set it to delete old backups more than 1 minute old. Problem is, the first night it works fine, the second night it sometimes it refuses to delete the old and therefore does not have enough space to complete the new back-up. Does anyone run into this before? Does it complete both back-ups THEN erase the old, in which case I need to have about 6GB available? Sometimes it works and sometimes it doesn't. It can be going along fine for weeks then stop working. Any info or links to how this is supposed to work would help.
TIA
View 3 Replies
View Related
Jan 16, 2008
I have the following issue with Maintenance plan backups that work for BAK DIF and TRN to a remote server share.
When I try and remove the old files with a clean up task I get an error and the files don't get deleted.
The version is as follows
Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50
Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on
Windows NT 5.2 (Build 3790: Service Pack 2)
The error result is as follows,
Failed-1073548784) Executing the query "EXECUTE master.dbo.xp_delete_file
0,N'\\EXECUTE master.dbo.xp_delete_file 0,N'\ABCD-A1\BACKUPS\ABCD_BACKUP\ABC_DAILY\ABCD',N'trn',N'2008-01-13T12:52:49'" failed with the following error: "xp_delete_file() returned error 2, 'The
system cannot find the file specified.'". Possible failure reasons: Problems
with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
The maintenance plan seems to be adding extra "" though when i enter the
code directly in a query i get same error.
Query:
EXECUTE master.dbo.xp_delete_file 0,N'\ABCD-A1BACKUPSABCD_BACKUPABC_DAILYABCD',N'trn',N'2008-01-13T12:52:49'
Error:
xp_delete_file() returned error 2, 'The system cannot find the file specified.'
The servers belong to the same domain and are using the same Service account which has all the necessary rights to the share and the file directory location. The backups work but i get the error on the cleanup task.
Trying to figure out how to get the Cleanup task to delete old files. The same happens for all file extensions and I have tried other locations with simpler file paths same error.
Regards,
Scott
View 6 Replies
View Related
May 3, 2015
I am trying to delete tables from data where the ModifiedDates older than 9 years in AdventureWorks2012 database . I get console notified that foreign keys are dropped but the delete statement is throwing errors. I am sure that somewhere the key constraints are not getting altered, but i'm not able to figure it out as i'm a relative beginner to T-SQL. The error and code:
The DELETE statement conflicted with the REFERENCE constraint "FK_SalesOrderHeaderSalesReason_SalesReason_SalesReasonID". The conflict
occurred in database "AdventureWorks2012", table "Sales.SalesOrderHeader
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null
$option_drop = new-object Microsoft.SqlServer.Management.Smo.ScriptingOptions;
$option_drop.ScriptDrops = $true;
[Code] ....
View 3 Replies
View Related
Sep 10, 2013
I don't know if the question has been nailed down. Aside from deleting tables, can we delete the *content* of data within the tables. It doesn't seem crazy that, if you can pull in data from a feed then you should be able to remove the content out again (without also destroying the user's meta-data work ). Reasons for this include:
- Security (a user may not have rights to see *my* data and should go refresh their own)
- Size (workbook doesn't need to have GB's of irrelevant data saved to disk in a workbook if it was just useful during development phase to a pre-production data feed)
- Bad data (pre-production data feed is not good data)
- User-friendliness (data feed was refreshed 2 years ago and workbook was saved to file server. Users shouldn't be presented with irrelevant data, but should get empty pivot tables until they go do their refresh)
Obviously Excel internally knows how to clear out PowerPivot data, given the prompt shown here: [URL] ....
But how does a user initiate this on their own (corruption aside)?
Previous time this question was asked, without a real resolution: [URL] ....
View 8 Replies
View Related
Mar 14, 2008
We are running SQL Server 2005 express on Windows 2003. The database server gets significant amounts of data.
Because of the 4GB data limit we have a daily cron task which goes through and deletes data older then 90 days.
We would like a way to archive this data instead of deleting it. Is there any way to take data and compress it and store it in a different way, so that if needed, customers can query directly out from the compressed data? Cleary querying from compressed would be slower but that is ok.
Any other solutions that would allow us to archive data instead of deleting it? Thanks.
View 10 Replies
View Related
Apr 10, 2007
I have a package which loads data from a flat file (csv) to 4 tables in a database.
Now, the load is incremental.
I want to clear the data of all 4 tables(in the database) before loading the data from flat file everytime.How can i do this?
Iam using 4 Oledb Destinations, 1 multicast, 1 source component to do this.
Also can it happen like a transaction? because if it deletes the existing data and couldnt load new data there will be a problem!.how to avoid this?
View 4 Replies
View Related
Aug 9, 2007
Hi
i have to delete the master table data without deleting the child table records,is there any solution for this, parent table has relation with the child table.
regards
vinod.t.v
View 9 Replies
View Related
Nov 23, 2006
I have edited the aspnet_Users_CreateUser stored procedure so that the UserId that is created when a new user is created is copied to a UserId field in another table. However, when I use the website administration tool to delete users that have been created, it gives me an error saying the delete statement conflicted with the reference constraint. I then added the following code in the aspnet_Users_DeleteUser procedure....
IF ((@TablesToDeleteFrom & 16) <> 0 AND
(EXISTS (SELECT name FROM sysobjects WHERE (name = N'vw_tt') AND (type = 'V'))))
BEGIN
DELETE FROM dbo.userclassset WHERE @UserId = UserId
SELECT @ErrorCode = @@ERROR,
@RowCount = @@ROWCOUNT
IF( @ErrorCode <> 0 )
GOTO Cleanup
IF (@RowCount <> 0)
SELECT @NumTablesDeletedFrom = @NumTablesDeletedFrom + 1 hdhd
END
This code was then added to the function at the end which deletes the data from the aspnet_Users table when everything else has been removed
(@TablesToDeleteFrom & 16) <> 0 AND
Now when I delete a user in the website admin tool, it "deletes" (with no error) the user from the list but doesnt actually physically delete it from the database.
Any ideas?
View 1 Replies
View Related
Jul 26, 2007
Is there a way to delete all data from a database - all tables and alltables excluding system tables?sqlserver 2000?Thanks,Tmuld
View 3 Replies
View Related
Jul 18, 2014
/****** Object: StoredProcedure [dbo].[dbo.ServiceLog] Script Date: 07/18/2014 14:30:59 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER proc [dbo].[ServiceLogPurge]
-- Purge records dbo.ServiceLog older than 3 months:
-- Purge records in small portions to avoid locking production tables
-- for a long time. The process takes longer, but can co-exist with
-- normal usage of the tables.
[Code] ...
*** Getting this error below when executing the code ***
Msg 102, Level 15, State 1, Procedure ServiceLogPurge, Line 45
Incorrect syntax near 'Failed:'.
View 9 Replies
View Related
Nov 23, 2004
Edited by SomeNewKid. Please post code between <code> and </code> tags.
I have added a delete button to my datagrid, and put in what I think is the code to delete a member from the database at their Member ID, however when I have called a members details and the delete button is pressed, nothing happens!!??
Any ideas?
Here is the code:
<%@ Page Language="VB" %>
<script runat="server">
' Insert page code here
'
Function GetMember(ByVal iD As Integer) As System.Data.SqlClient.SqlDataReader
Dim connectionString As String = "server='localhost'; trusted_connection=true; Database='adp1SQL'"
Dim sqlConnection As System.Data.SqlClient.SqlConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "SELECT [oga].* FROM [oga] WHERE ([oga].[ID] = @ID)"
Dim sqlCommand As System.Data.SqlClient.SqlCommand = New System.Data.SqlClient.SqlCommand(queryString, sqlConnection)
sqlCommand.Parameters.Add("@ID", System.Data.SqlDbType.Int).Value = iD
sqlConnection.Open
Dim dataReader As System.Data.SqlClient.SqlDataReader = sqlCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Return dataReader
End Function
Sub dgMember_Delete(sender as Object, e as DataGridCommandEventArgs)
dgMember.EditItemIndex = -1
dgMember.DataSource = GetMember(memberID.Text)
dgMember.DataBind()
End Sub
Sub btnView_Click(sender As Object, e As EventArgs)
dgMember.DataSource = GetMember(memberID.Text)
dgMember.DataBind()
End Sub
Sub dgMember_SelectedIndexChanged(sender As Object, e As EventArgs)
End Sub
Function DeleteMember(ByVal iD As Integer) As Integer
Dim connectionString As String = "server='localhost'; trusted_connection=true; Database='adp1SQL'"
Dim sqlConnection As System.Data.SqlClient.SqlConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "DELETE FROM [oga] WHERE ([oga].[ID] = @ID)"
Dim sqlCommand As System.Data.SqlClient.SqlCommand = New System.Data.SqlClient.SqlCommand(queryString, sqlConnection)
sqlCommand.Parameters.Add("@ID", System.Data.SqlDbType.Int).Value = iD
Dim rowsAffected As Integer = 0
sqlConnection.Open
Try
rowsAffected = sqlCommand.ExecuteNonQuery
Finally
sqlConnection.Close
End Try
Return rowsAffected
End Function
</script>
<html>
<head>
</head>
<body id="dgMemberInfo">
<font face="arial">
<h1><img src="thlogotop.gif" align="left" /> <img src="thlogotop.gif" align="right" />
<br />
<center><font color="red">T</font>albot <font color="red">H</font>eath <font color="red">O</font>ld <font color="red">G</font>irls <font color="red">A</font>ssociation
</center>
</h1>
<h2 align="center">Delete a Member
</h2>
<asp:HyperLink id="HyperLink1" runat="server" Width="94px" NavigateUrl="Default.aspx">Main Menu</asp:HyperLink>
<hr />
<br />
<br />
<br />
<p align="center">
</p>
<form runat="server">
<br />
<div align="center">Please Enter Member ID :
<asp:TextBox id="memberID" runat="server"></asp:TextBox>
</div>
<br />
<br />
<br />
<br />
<div align="center">
<asp:Button id="btnView" onclick="btnView_Click" runat="server" Width="204px" Text="View Member Details"></asp:Button>
</div>
<br />
<br />
<p align="center">
<asp:DataGrid id="dgMember" runat="server" BorderColor="Black" OnSelectedIndexChanged="dgMember_SelectedIndexChanged" AutoGenerateColumns="False" OnDeleteCommand="dgMember_Delete">
<Columns>
<asp:ButtonColumn Text="Delete" ButtonType="PushButton" CommandName="Delete"></asp:ButtonColumn>
<asp:BoundColumn DataField="ID" HeaderText="ID">
<HeaderStyle font-bold="True" horizontalalign="Center" verticalalign="Middle"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="Member No" HeaderText="Member No">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="Surname" HeaderText="Surname">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="Forenames" HeaderText="Forenames">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="Known as" HeaderText="Known As">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="Title" HeaderText="Title">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="Address" HeaderText="Address">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="Home Tel" HeaderText="Home Tel">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="Email" HeaderText="Email">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="DOB" HeaderText="DOB">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="StartDate" HeaderText="StartDate">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="LeaveDate" HeaderText="LeaveDate">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
<asp:BoundColumn DataField="clubsoc" HeaderText="Club/Society">
<HeaderStyle font-bold="True" horizontalalign="Center"></HeaderStyle>
</asp:BoundColumn>
</Columns>
</asp:DataGrid>
</p>
<p align="center">
</p>
<p align="left">
<br />
<br />
</p>
<!-- Insert content here -->
</form>
</font>
</body>
</html>
View 2 Replies
View Related
Oct 23, 2007
my row in my data base consists of 12 coulmns, i have a duplicate values in 6 coulmns of it , i use select distinct for all it doesnt work for it it doesnot remove dupliacte , i cant make primary key or any constraint on this 6 coulmns together cause it contains duplicate values even if i choose ignore duplicate it doesnot work
example
id name adress telephone job gender deprtment
1 john dd 123 doctor m 1st deprtment
1 john dd 123 doctor m 2nd deprtment
so there is duplicate on id, name,telephone, job , gender and different in department so how i make a primary key on id , name , adress , telephone , job , gender together
also how to delete duplicate from it although i used distinct function and it doesnit remove duplicate
thanks in advance
View 3 Replies
View Related
Aug 8, 2007
I am looking for an opinion on the best way to delete all data from a table after it has been replicated.
The simple use case would be:
Data is replicated from production server to archive server.
Data is deleted from production serverThanks in advance...
View 6 Replies
View Related
Mar 9, 2007
I have a table where I want to delete some data from but I get this error.
You might have a record that has a foreign key value related to it, or you might have violated a check constraint.
What to do????
View 1 Replies
View Related
Jun 6, 2004
Hi
I installed " Web Wiz Forum ASP SQL 2000 DB "
it work fine but
when i added some data in the forum for example my db size is 1.45 MB
after i delete those data the db size will not decrease
is there any code that i must enter on the sql server setup file
Excuse me i asked this question in the web wix forum site but they don`t
answer me
if know what i must to do plz tell me
Thanks
View 6 Replies
View Related
Mar 13, 2014
Is this close to the correct syntax for a stored procedure for deleting all the data from a particular table... or is there a better way?
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE TruncateTmpBank
[Code] ....
View 3 Replies
View Related
Aug 10, 2015
I wrote a script to archive and delete records rom a table back in 2005 and 2009.
I can't seem to get the syntax right. Any sample script to simply archive and delete records?
This is what I have so far.
DECLARE @ArchiveDate Datetime
SET @ArchiveDate = (SELECT TOP 1 DATEPART(yyyy,Call_Date)
FROM tblCall
ORDER BY Call_Date)
--SELECT @ArchiveDate AS ArchiveDate
DECLARE @Active bit
[Code] ....
View 9 Replies
View Related
Jan 20, 2014
I have to delete a ton of data from a SQL table. I have a unique identifier called the version. I would like to use if not in these versions then delete. I tried to using the statement below, but learned the hard way that it created an error this is the message I got....
Msg 9002, Level 17, State 4, Line 3...
The transaction log for database 'MonthEnds' is full due to 'ACTIVE_TRANSACTION'.
I was reading about truncate, I am not sure how I would do this or how I would setup the statement.
Delete Products
where versions were not in (('48459CED-871F-4971-B888-5083990332BC','D550C8D3-58C7-4C74-841D-1C1675F19AE3','C77C7817-3F04-4145-98D3-37BB1610DB35',
'21FE83FA-476D-4604-80EF-2ED57DEE2C16','F3B50B81-191A-4D71-A406-011127AEFBE1','EFBD48E7-E30F-4047-909E-F14DCAEA4181','BD9CCC41-D696-406B-
'C8BEBFBC-D362-4D0F-A555-B281FC2B3023','EFA64956-C2CF-41FC-8E21-F060597DAFCB','77A8DE56-6F7F-4490-8BED-AA6809B947EF','0F4C1E5F-B689-4DCB-
[code]....
View 2 Replies
View Related
Feb 13, 2008
Hi gurus,
The data is automaticaly deleting from one perticular table at every night from last week onwords. I have created a delete trigger to find it out. But Nothing was recorded. There is no jobs except maintainance plans. Nothing in event viewer too. The database recovery model is simple. How can i solve this problem
Please advise me to solve this problem
Thanks
Krishna.
View 11 Replies
View Related
Jul 20, 2005
I have an entry form allowing customers to enter up to 15 skus (productid) at a time, so they can make a multiple order, instead of enteringone sku, then submitting it, then returing to the form to submit thesecond one, and so forth.From time to time, the sku they enter will be wrong, or discontiued, soit will not submit an order.Therefore, when they are done submitting their 15 skus through the orderform, I want a list showing them all of those skus that came back blank,or were not found in the database.I'm doing this by creating two tables. A shopping cart, which holds allthe skus that were returned, and a holding table, that holds all theskus that were submitted. I want to then delete all the skus in theholding page that match the skus in teh cart (because they are goodskus) which will then leave the unmatched skus in the holding table.I'll then scroll out the contents of the holding table, to show them theskus that were not found in the database.(confused yet?)So what I want to do is have some sql that will delete from the holdingtable where the sku = the sku in the cart. I've tried writing this, butit dosn't work.I tiried this delete from holding_table where sku = cart.skuI was hoping this would work, but it dosn't. Is there a way for me to dothis?Thanks!Bill*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies
View Related
Mar 20, 2008
Hi Everybody,
Kindly let me know if there is a way of deleting data from primary table without deleting data from its corresponding foreign key table.
Thanks & Regards
View 2 Replies
View Related
Sep 27, 2006
I have a table that contains more than 10,000 rows of
duplicate data. The script below copies the data to a temp table then
deletes from the original table. My problem is that after it runs, I now
have 122 rows of triplicate data (but dups are gone). If I rerun the script, it doesn't see the
triplicate data and returns 0 rows. I've use three different versions of
delete dup row scripts with the same result. There are no triggers or
constraints on the table, not even a primary key. What am I missing?-------------------------------------------------------------------
/**********************************************
Delete Duplicate Data
**********************************************/
--Create temp table to hold duplicate data
CREATE TABLE #tempduplicatedata
(
[student_test_uniq] [bigint] NULL,
[test_uniq] [int] NULL,
[concept_id] [smallint] NULL,
[test_id] [varchar](12) NULL,
[questions_correct] [smallint] NULL,
[questions_count] [smallint] NULL,
[percentage_correct] [decimal](6, 3) NULL,
[concept_response_count] [smallint] NULL
)
--Identify and save dup data into temp table
INSERT INTO #tempduplicatedata
SELECT * FROM crt_concept_score
GROUP BY student_test_uniq,
test_uniq,
concept_id,
test_id,
questions_correct,
questions_count,
percentage_correct,
concept_response_count
HAVING COUNT(*) > 1
--Confirm number of dup rows
SELECT @@ROWCOUNT AS 'Number of Duplicate Rows'
--Delete dup from original table
DELETE FROM crt_concept_score
FROM crt_concept_score
INNER JOIN #tempduplicatedata
ON crt_concept_score.student_test_uniq = #tempduplicatedata.student_test_uniq
AND crt_concept_score.test_uniq = #tempduplicatedata.test_uniq
AND crt_concept_score.concept_id = #tempduplicatedata.concept_id
AND crt_concept_score.test_id = #tempduplicatedata.test_id
AND crt_concept_score.questions_correct = #tempduplicatedata.questions_correct
AND crt_concept_score.questions_count = #tempduplicatedata.questions_count
AND crt_concept_score.percentage_correct = #tempduplicatedata.percentage_correct
AND crt_concept_score.concept_response_count = #tempduplicatedata.concept_response_count
--Insert the delete data back
INSERT INTO crt_concept_score
SELECT * FROM #tempduplicatedata
--Check for dup data.
SELECT * FROM crt_concept_score
GROUP BY student_test_uniq,
test_uniq,
concept_id,
test_id,
questions_correct,
questions_count,
percentage_correct,
concept_response_count
HAVING COUNT(*) > 1
--Check table
-- SELECT * FROM crt_concept_score
--Drop temp table
DROP TABLE #tempduplicatedata
GO
View 1 Replies
View Related
May 30, 2006
I can run a select to retrieve data using a prefix 'a' for the specific table involved. However when I try to run a delete using the same criteria it fails telling me
Msg 102, Level 15, State 1,.......Line 1
Incorrect syntax near 'a'
The Select statement looks like:
select count(*) from schema.table a where a.customer_id=1234
The Delete looks like:
delete from schema.table a where a.customer_id=1234
What am I doing wrong here? and how can I prefix the table, because the command I want to run is much more complicated than the example above and it needs the prefix
View 3 Replies
View Related
Aug 22, 2007
When I delete substantial amounts of data using the SQL DELETE command, the database size apparently remains the same (702 mb) and the log file goes from about 17 mb to over 1 gig. I was expecting for the overall size to decrease drastically, but got just the opposite.
Is this typical? Can I do something to slim it down? As I am just trying to decrease the overall size to make it easier to work with when creating my application in VB, I am not worried about restoring the db (I have secure copies).
View 15 Replies
View Related
Jan 9, 2008
Hi All,
I have to delete 135 Million records from our production server, keeping only last three months data & the table doesnot have any index.
Can you please suggest the best possible approach to perform this activity.
Approach i am thinking :-
1)I will rename the existing table & create a new table with the same name (By this my application wont be interrupted)
2)then i am planning to create a nonclustered index on the date column sort order desc so that i can get the last three months data.
3)Once the index is created i can transfer the required records to the new table created in step 1.
Please sugeest your valuable feedback or suggestions to perform the task ASAP.
Thanks
View 9 Replies
View Related
Jan 15, 2002
On SQL 6.5 we have had a couple of instances recently where an orphan connection cannot be killed and the only way to get rid of it is to stop and start the service. Does anyone know of any other way to get rid of that orphan connection?
View 1 Replies
View Related
Jan 14, 2000
As I do analysis on a database I am finding multiple clustered indexes defined on a single table.
I know this is not possible since SQL Server only allows one clustered index per table.
With more research I found these suspected clustered indexes have a corresponding row in
sysindexes but without a correlating id match in either sysobjects or syscolumns.
Is this orphaning of indexes common and what is a recommended solution.
Thanks,
Randy Garland
View 2 Replies
View Related
Nov 3, 2004
I have a .mdf file that I would like to restore. However the log file has been destroyed. Is there any way to restore just an .mdf file?
View 1 Replies
View Related
Feb 4, 2002
/*************************************************************************************
This procedure should be created in the Master database. This procedure takes no
parameters. It will remap orphaned users in the current database to EXISTING logins
of the same name. This is usefull in the case a new database is created by restoring
a backup to a new database, or by attaching the datafiles to a new server.
*************************************************************************************/
IF OBJECT_ID('dbo.sp_fixusers') IS NOT NULL
BEGIN
DROP PROCEDURE dbo.sp_fixusers
IF OBJECT_ID('dbo.sp_fixusers') IS NOT NULL
PRINT '<<< FAILED DROPPING PROCEDURE dbo.sp_fixusers >>>'
ELSE
PRINT '<<< DROPPED PROCEDURE dbo.sp_fixusers >>>'
END
GO
CREATE PROCEDURE dbo.sp_fixusers
AS
BEGIN
DECLARE @username varchar(25)
DECLARE fixusers CURSOR
FOR
SELECT UserName = name FROM sysusers
WHERE issqluser = 1 and (sid is not null and sid <> 0x0)
and suser_sname(sid) is null
ORDER BY name
OPEN fixusers
FETCH NEXT FROM fixusers
INTO @username
WHILE @@FETCH_STATUS = 0
BEGIN
EXEC sp_change_users_login 'update_one', @username, @username
FETCH NEXT FROM fixusers
INTO @username
END
CLOSE fixusers
DEALLOCATE fixusers
END
go
IF OBJECT_ID('dbo.sp_fixusers') IS NOT NULL
PRINT '<<< CREATED PROCEDURE dbo.sp_fixusers >>>'
ELSE
PRINT '<<< FAILED CREATING PROCEDURE dbo.sp_fixusers >>>'
go
View 20 Replies
View Related