ESQL1 will get max(id) from table and then based on the ID the remaining needs to be work.
Ex: If the ID=AUS-Sdy-1 then ESQL2 will update the tbl1 and return one IDkey based on this return key the ESQL3 will update a tbl2. ----------*( i want to disable ESQL4) else If the ID=AUS-Sdy-2 then ESQL3 will update the tbl1 and return one IDkey based on this return key the ESQL4 will update a tbl2. ----------- *(i want to disable ESQL2)
I have a package that contains multiple SEQUENCE CONTAINERS, each execute a bunch of tasks. I try to use the script task to dynamically disable or enable each of these SEQUENCE CONTAINERS base on parameters that pass in from parent package, but for some reason, I can€™t set the disable value to True/False at runtime. Anyone knows how to do this?
I have a parameter for each field that lets me know if a field can be sorted or not. What I want to be able to do is turn on or off interactive sorting for that column based on that parameters value.
In the dialog you have a check box that says enable interactive sorting. When that is clicked it appears that you get the two arrows no matter what you put in the expression.
I have tried
=IIF(allowSorting,Fields!myColumn.Value,"")
and
=IIF(allowSorting,Fields!myColumn.Value,Nothing)
but both result in the arrows still being there, just the sort doesn't work.
Is it possible to put an expression on the sort arrows appearing at all?
I found it annoying that I have not being able to put more than one conditions in the Evaluation Expression within the For Loop Containter? e.g. iCounter<N , also I want to put another condition there like IsHoliday=1. How can I achieve that?
I have tried to used the LOGICAL AND operator && to combine more than one condition, but it did not work.
Please shed me some light on that.
Thank you very much and I am looking forward to hearing from you shortly.
Hi, I'm trying to loop thru a table and insert records into another table in ssis. So far I have been able to get the data using a execute sql task set up to store the full result set into a variable called data. I then drug a foreach loop container out and selected the foreach ADO enumerator and used my variable data as the ADO object source variable. I then set up a new variable under variable mappings with index 0 to get the collection values. How do I take that variable and update another table using another sql task inside the foreach loop container? Is this possible?
I am having a Data flow task in For each loop which will gets 100 sourcetable names and 100 target table names...
am having a simpleData flow task which trasferes from OLEDBSource to OLEDBDestination. I am repeating the Dataflow task which transfers from sourcetablename extracted from for loop to a destination table var.
The problem am gettting is for the first table it is able to transfer correcly because I did mapping for those tables at design time...but for the next coming sourcetable-desttable (which r having different no of cols,datatypes) its giving Validation failed...and...needs to refresh metadata....
is there any way to refresh the metadata of Data flow task (I set the property of OLEDBSource validate external meta to false then also same error is coming)
Is there a way to disable logging ? I'm about to split a 1000000 rows table into three other tables , and would prefere not to log this action ... Does anyone know how to do it in a SQL 7.0 statement ?
can I disable a trigger in Sqlserver 2000??? When i run a store procedure who works with one table i want that the trigger doesn´t work it. After that the trigger would be enabled again.
I know i can delete it and create it again but something like "ALTER TRIGGER DISABLED" would be ok.
Is there any way to disable the primary key constraint?.I want to move the records from one table to another.say column 'x' in the source table doesnt contain a primay key.But my target table column 'x' contains primay key. How to ovecome this problem? Thanks in advance
In meen. primary keys, NOT NULL, IDENTETIES...et.cI have to do a maunally, one time, building of a database. Sometables has tostay an some are to be exchanged. The foreignkey inforcemnt ill do for myself so everything is correct. I just need to be allowed to de thede taskfor a while. Is it impossible?RegardsAnders
I am trying to disable certain users, but it is giving me this error. I am able to disable some accounts, but not all of them. It seems to happen with user that have been recently created.
TITLE: Microsoft SQL Server Management Studio ------------------------------
Disable Login. failed for Login 'domainuser'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Disable+Login.+Login&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not obtain information about Windows NT group/user 'domainuser', error code 0x5. (Microsoft SQL Server, Error: 15404)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=15404&LinkId=20476
The links lead to a page that is no longer available.
I read somewhere that it had to do with the SQL Server service account and that if you change it to a Domain Administrator it would and it does, but I can not believe the solution. I would say that this even started happening after we applied SQL 2005 Service Pack 2.
Has anyone else seen this problem. Do I really need to make it a Domain Administrator?
Sorry to reopen a post, but I'm having the same problem. Worse, I can't change the trigger code right now.
My concerns with disabling triggers are:
1) DISABLE TRIGGER affects all sessions, not just the session doing the mass load 2) DISABLE TRIGGER is permanant until re-enabled, so if the mass load process fails (and if our TRY/CATCH blocks aren't perfect), then the triggers would remain disabled for normal OLTP use. Any ideas on ways around this? I can identify all the work the triggers would have done and do it on my own. The problem is getting them not to do it!
I would like to be able to disable grouping depending on the value of parameter. At the moment I have the following expression for grouping: =IIf(Parameters!Group2.Value.equals(""), false, Fields(Parameters!Group2.Value).Value)
What I am trying to do is if the value of the Group2 parameter = "" turn off grouping. Group2 is assigned a value from the following custom code:
Function Group2Value() As String Dim Group As String Group = "" Select Case Report.Parameters!ReportType.Value Case "1"
Group = "" Case "2"
Group = "CategoryID" Case "3"
Group = "StockFamilyID" Case "4"
Group = "GroupID" Case "5"
Group = "" Case "6"
Group = "SaleableGLCodeID" End Select Return Group End Function
However this is not working.
Can grouping be disabled and if so what am I doing wrong?
select * from table where cond1 and cond2 and col.port in <string> ... goes
end
i passing this string from other function, i may be not be needing this filter(underlined) for some functionality, but i will be using the same function for both the functionalities
i need a string that should tell the sql server to allow all the possible values for that column, so by disabling the filter which i am using...
Hello, I am making a web application and I will show reports with the reportviewer, however the user can manage some parameters of the applicacion, the administrator can decide if he wants to allow the user to export or not export to PDF or XLS.
Anyway, I want to enable or disable those options in the reportview dinamically!
I am trying to disable transactional replication, but am having some problems. I used the wizard, however, it has taken 7 hours so far and is still not done. SQL Server (7.0) is showing the connection as runnable but it seems as if nothing is being removed. Am I missing something? Should I have done something else before running the wizard? I can't even kill the SPID.
Yesterday I set up a Transaction replication with 1 publication Server A (publisher)(push)(SQL 7) Server B (distributor and subscriber)(SQL 7)
The replication was succesful and the suscriber can get correct data.
This morning I found the Red sigh in replication mornitor/miscellaneous agents.The error message is: "The job failed. Unable to determine if the owner (domain nameuser ID) of job Agent history clean up: distribution has server access (reason: Could not obtain information about Windows NT group/user 'domain name'. [SQLSTATE 42000] (Error 8198))."
I tried to use the 'disable publishing and distribution wizard' to disable this replication, but it did not finish and the screen jusr freeze. I used the task manager to end the task.
then I check the replication monitor, the publication was gone but the RED sigh still there.
I tried to use sp_dropdistpublisher to drop a Publisher but it said "the server A is not a distributor"
I tried to use sp_dropdistributiondb to delete the distribution database. but it said "Could not drop the distribution database 'distribution'. This distributor database is associated with a Publisher."
I tried to use sp_dropdistributor to remove the Distributor . but it said "Could not drop the Distributor 'Server B'. This Distributor has associated distribution databases."
I have a dilema, I need to have a delete trigger enabled to track user deletes to update an external history table. However, when the posting process runs for the table for which the delete trigger runs, all the records from that table are deleted. Th end result is that instead of capturing the specific deletes, it shows all recods being deleted. I know you can disable foreign keys and triggers as a whole, can you do it for specific triggers?
What is the best way to disable using the Windows policy requirements when creating a new login?
example: I'm trying to create a login and the password doesn't meet the windows policy requirements. The easy thing to do would be to create a strong password. This isn't an option at the moment. I need to disable this so I can create new users that dont have strong passwords.
There is a trigger to monitor the modification on a table, and it turn on. For a special duration, I need to turn off this trigger to modify the table. And then turn on the trigger again.
