Display Query Result Vertically
Mar 27, 2008
Hi,
I have a query to run, but the data in the tables are stored horizontally. I want the query to output the result vertically.
e.g. if row 1 contains the following data:
custA,3-april2008,mango's,123,456,78,10
Then i want it to output as follows:
custA,3-april2008,mango's,123
custA,3-april2008,mango's,456
custA,3-april2008,mango's,78
custA,3-april2008,mango's,10
hope I'm clear, and would appreciate if someone could help me.
Thanks
View 3 Replies
ADVERTISEMENT
Nov 20, 2006
In query editor I displayed a single row from a table. The row is so long that I need to scroll horizontally back and forth to check out it's fields. Using t-sql (or otherwise) can I display the row like this: (vertically)
Field Name 1: < data value 1>
Field Name 2: < data value 2>
Field Name 3: < data value 3>
Field Name 4: < data value 4>
etc.
TIA,
barkingdog
View 5 Replies
View Related
Feb 15, 2006
I am trying to count the number of Part that is repaired and those that is not repaired, is there a way to combine the following into one result set instead of returning 2? The bold line is the only condition that's different between this 2 query.
I want to display these fields: date_complete, part_categoryid, part_model, repaired, not_repaired
/* parts being repaired */select DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0) as date_complete, part_categoryid, part_model, count(DISTINCT part_id) as repaired from tblPtSingapore INNER JOIN tblAuditPartStatus ON tblPtSingapore.part_Id = tblAuditPartStatus.auditpartstatus_partidwhere (tblAuditPartStatus.auditpartstatus_status = N'COMPLETE')and part_replaced = 0and (part_flag_nff = 0 and part_flag_ntf = 0 and part_flag_beyondrepair = 0)group by DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0), part_categoryid,part_modelorder by part_model, DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0)
/* parts completed but not being repaired */select DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0) as date_complete, part_categoryid, part_model, count(DISTINCT part_id) as not_repaired from tblPtSingapore INNER JOIN tblAuditPartStatus ON tblPtSingapore.part_Id = tblAuditPartStatus.auditpartstatus_partidwhere (tblAuditPartStatus.auditpartstatus_status = N'COMPLETE')and part_replaced = 0and (part_flag_nff = 1 or part_flag_ntf = 1 or part_flag_beyondrepair = 1)group by DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0), part_categoryid, part_modelorder by part_model, DATEADD(d,DATEDIFF(d,1,tblAuditPartStatus.auditpartstatus_datecreated),0)
View 2 Replies
View Related
Apr 9, 2006
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies
View Related
Mar 21, 2007
Hi,
I'm having a problem in spliting the fields
I need to ru the following query to join two tables and getting the output as shown.
Query:
select cusl.user_name,
pmts.bill_ref_info, pmts.payee_acid, pmts.cust_acid, pmts.txn_amt,pmts.pmt_id
from cusl, pmts
where cusl.ubp_user_id = pmts.ubp_user_id and pmts.ubp_user_id= 'testinglive'
Output:
user_name bills_ref_info payee_acid cust_acid txn_amt
SAMEER ALLA0210181#123456#Amita 378902010021095 383702070051411 1.000 16318
SAMEER BARB0GNFCOM#6788990#Vikram Kalsan 378902010021095 383702070051411 1.000 16327
SAMEER BKID0000200#378902010099678#Vikram 378902010021095 383702070051411 1.000 14031
SAMEER undefined#123456789123456#Vikram 378902010021095 383702070051411 1.000 13918
Now I need to display the second field which is a #-separated field as individual fields alongwith tghe other fields that are shown on execution of the query.
Can this be done? Please guide me on this...
View 7 Replies
View Related
Nov 6, 2007
Question: I have searched here and on Microsofts site already but it seems that all solutions require already either some ASP2 knowledge or MSSQL knowledge .. I am quite new in both but need to realise this for a project.
I have installed a MSSQL 2005 server running MSSQL2005 Standard in mixed authentication mode. Services running using a domain account created for this purpose.
I have then created a simple database called test with a table called testtable
All I need to achieve now is a simple ASP2 page, which is located on the DC IIS, which connects to the SQL server (in same domain but different server) using WINDOWS authentication and returns the result of
SELECT * FROM TESTTABLE
I try now for a couple of days so I hope someone could help me with this .. I really need a step by step guide what I need to do on the SQL server side (so a specific user can connect to this particular database) and on the IIS side ..
I know it is always painful to help someone with little knowledge but I am getting desperate.
Thanks a lot guys
View 1 Replies
View Related
May 25, 2015
Here the SELECT query is fetching the records corresponding to ITEM_DESCRIPTION in 5 separate transactions. How to change the cursor to display the 5 records in at a time in single transactions.
CREATE TABLE #ITEMS (ITEM_ID uniqueidentifier NOT NULL, ITEM_DESCRIPTION VARCHAR(250) NOT NULL)INSERT INTO #ITEMSVALUES(NEWID(), 'This is a wonderful car'),(NEWID(), 'This is a fast bike'),(NEWID(), 'This is a expensive aeroplane'),(NEWID(), 'This is a cheap bicycle'),(NEWID(), 'This is a dream holiday')
---
DECLARE @ITEM_ID uniqueidentifier
DECLARE ITEM_CURSOR CURSOR
[Code] ....
View 1 Replies
View Related
Apr 8, 2008
Hi all
If we don't specify any Order by clause, what is the default order of displaying the data .
Will SQL Server show the data in a consistent order?
Thanks.
View 6 Replies
View Related
Feb 7, 2006
I am trying to display component usage in January for the past year, if I want to display the year in different column, what should I do?
eg.
component_id component_description qty_used_on_2005_Jan qty_used_on_2006_Jan
C58B0BDD tape drive 2 3
Currently I am using this sql:
select cast(year(date_complete) as varchar(10)) + ' Jan' as Year, component_id, component_description,sum(component_qty) as total_qty_used
from view_jobComponent
where month(date_complete) = 1group by component_id, component_description, cast(year(date_complete) as varchar(10)) + ' Jan'order by component_id, component_description
which I will get something like this:
Year component_id component_description total_qty_used
2005 Jan C58B0BDD tape drive 22006 Jan C58B0BDD tape drive 3
View 9 Replies
View Related
Jun 17, 2014
I have an issue while display the result in the required order. How to get the required output.
Code :
USE tempdb
GO
IF OBJECT_ID('tempdb..#VersionFormat_tbl') IS NOT NULL
DROP TABLE #VersionFormat_tbl
CREATE TABLE #VersionFormat_tbl
(
[FormatID] [smallint] NOT NULL,
[Description] [varchar](50) NULL,
[Code] ....
Present output :
fileExtension FormatID Description fileExtension versionFormatTypeId
txt 1 Text txt 1
html 2 HTML html 1
xml 3 XML xml 1
pdf 4 PDF pdf 1
xls 5 Excel xls 1
doc 6 Word doc 1
Required output:
fileExtensionFormatIDDescriptionfileExtensionversionFormatTypeId
html2HTMLhtml1
xls5Excelxls1
doc6Worddoc1
pdf4PDFpdf1
txt1Texttxt1
xml3XMLxml1
View 5 Replies
View Related
Feb 5, 2008
Hi guys n gals !
I am having a few problems manipulating the results of my data reader,To gather the data I need my code is:
// database connection SqlConnection dbcon = new SqlConnection(ConfigurationManager.AppSettings["dbcon"]);
// sql statement to select latest news item and get the posters name SqlCommand rs = new SqlCommand("select * from tblnews as news left join tblmembers as members ON news.news_posted_by = members.member_idno order by news.news_idno desc", dbcon); // open connection dbcon.Open();
// execute SqlDataReader dr = rs.ExecuteReader();
// send the data to the repeater repeater_LatestNews.DataSource = dr; repeater_LatestNews.DataBind();
Then I am using: <%#DataBinder.Eval(Container.DataItem, "news_comments")%> in my repeater.What I need to do is pass the "news_comments" item to a function I created which will then write the result. The code for my function is:
// prevent html public string StripHtml(string data) { // grab the data string theData = data;
// replace < with &alt; theData = Regex.Replace(theData, "<", "<"); // return result return theData; }
But I am having problms in doing this,Can anyone point me in the right direction on what I should be doing ???
View 2 Replies
View Related
May 13, 2014
I am interested in changing the way that data is displayed in my result set.Essentially I want to display a selection of rows (1 to n) as columns, the following diagram explains my intentions.Perhaps one of the greatest challenges here is the fact that I do not have a concrete number of rows (or BIN numbers). Each stock item could be stored in one or more BINS, which I will not know until running my query.
View 2 Replies
View Related
Dec 18, 2007
Hello
I have a report that retrieves its data from Analysis Services. The data includes a count and dollar value of projects against their current status: It looks something similar to
(group1) status1 10 $200,000
(detail) p1 1 $5,000
p2 1 $10,000
.
.
p10 1 $20,000
(group1) status3 5 $90,000
(detail) .
.
(group1) status4 15 $150,000
(detail) .
.
In the report I hide the detail rows. I have a fixed/known number of statuses (in this case 4) and need to show all 4 in the report. eg
(group1) status1 10 $200,000
(detail) p1 1 $5,000
p2 1 $10,000
.
.
p10 1 $20,000
(group1)status2 0 $0
(group1) status3 5 $90,000
(detail) .
.
(group1) status4 15 $150,000
(detail) .
.
ie in this case I need to show status 2 (that doesn't exist in the data set) with zero totals.
Does anyone know if this is possible to get SSRS to display each of the status groups (in a known fixed list) and then match them to the records in the dataset.
As an alternative, if I were using SQL Server I could add rows to the dataset using a union statement. Is there similar functionality using mdx? My mdx skills are very basic.
Thanks
Stewart
View 1 Replies
View Related
Feb 13, 2001
HI,
I ran a select * from customers where state ='va', this is the result...
(29 row(s) affected)
The following file has been saved successfully:
C:outputcustomers.rpt 10826 bytes
I choose Query select to a file
then when I tried to open the customer.rpt from the c drive I got this error message. I am not sure why this happend
invalid TLV record
Thanks for your help
Ali
View 1 Replies
View Related
May 1, 2008
As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC.
Tables I have are structured as follows:
SHOWS
showID
showTitle
SHOWACCESS
showID
remoteID
VIDEOS
videoDate
showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle,
(SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID)
FROM shows, showAccess
WHERE shows.showID = showAccess.showID
AND showAccess.remoteID=21
ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate.
Can anyone shed some light on where I am going wrong?
thanks
View 3 Replies
View Related
Mar 26, 2004
I have the following problem. My SQL Query that i wrote works but the result that is displayed in Query analyzer cuts most of my long text that I want in my result. The long text string is approx about 400 characters and the type is varchar of the field. Any ideas??
SELECT '510', PRODCLASSID
, '1', COMPONENTID,'ENG'+SPACE(2),'#'+SPACE(254),'#'+SPAC E(254),'#'+SPACE(254),'#'+SPACE(99),externalid,
'Desc1' = CASE
WHEN SUBSTRING(externalid,1,2) = 'MF'
THEN 'Full machine warranty : parts, labour, mileage and others covered at warranty rates applicable at the time of repair. '
WHEN SUBSTRING(externalid,1,2) = 'MP'
THEN 'Full machine warranty, parts only : parts covered at warranty rates applicable at the time of repair. '
WHEN SUBSTRING(externalid,1,2) = 'PF'
THEN 'Power line warranty : parts, labour, mileage and others covered at warranty rates applicable at the time of repair. '
WHEN SUBSTRING(externalid,1,2) = 'PP'
THEN 'Power line warranty, parts only : parts are covered at warranty rates applicable at the time of repair. '
END
+
CASE
WHEN SUBSTRING(externalid,LEN(externalid)- 3,4) = '2018'
THEN 'Flexible warranty starts after the standard warranty period has expired and is covered up to 18 month or 2000 HRS, whichever comes first. '
WHEN SUBSTRING(externalid,LEN(externalid)-3,4) = '3024'
THEN 'Flexible warranty starts after the standard warranty period has expired and is covered up to 24 month or 3000 HRS, whichever comes first. '
WHEN SUBSTRING(externalid,LEN(externalid)-3,4) = '4030'
THEN 'Flexible warranty starts after the standard warranty period has expired and is covered up to 30 month or 4000 HRS, whichever comes first. '
WHEN SUBSTRING(externalid,LEN(externalid)-3,4) = '5036'
THEN 'Flexible warranty starts after the standard warranty period has expired and is covered up to 36 month or 5000 HRS, whichever comes first. '
WHEN SUBSTRING(externalid,LEN(externalid)-3,4) = '6042'
THEN 'Flexible warranty starts after the standard warranty period has expired and is covered up to 42 month or 6000 HRS, whichever comes first. '
WHEN SUBSTRING(externalid,LEN(externalid)-3,4) = '8054'
THEN 'Flexible warranty starts after the standard warranty period has expired and is covered up to 54 month or 8000 HRS, whichever comes first. '
WHEN SUBSTRING(externalid,LEN(externalid)-3,4) = '1074'
THEN 'Flexible warranty starts after the standard warranty period has expired and is covered up to 74 month or 10000 HRS, whichever comes first. '
END
+ 'Flexible warranty is handled according to the procedures described in ESPPM 3-10.'
+
CASE
WHEN prodclassid IN ('P1','P11','P8','P9')
THEN ' (mileage limited to 300 km)'
WHEN prodclassid IN ('P7')
THEN ' (mileage limited to 200 km)'
ELSE NULL
END
+
SPACE(5000 - LEN('Desc1'))
.......
View 1 Replies
View Related
Jan 22, 2007
Hi all,
I am using ASP.NET 2003 with SQL Server as database.
I have a database of a book store with BookPicture, Author, Title, and Description of the Book.
Now when the user searchers for a book with a keyword, how can I display the results which should show:
1. The picture of the book, 2. The at it right, Title of Book, 3. The author,4. The descritionThen the image of "Add to cart"
Each search result must be separated by a box like the cell of a table.
Is it possible to be done?
Thanking you in advance
Tomy
View 2 Replies
View Related
Jan 31, 2008
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Imports Microsoft.SqlServer.Server
Imports System.Data.OleDb
Imports System.Configuration
Imports System.Text
Imports System.Collections
Partial Public Class StoredProcedures
<Microsoft.SqlServer.Server.SqlProcedure()> _
Public Shared Sub StoredProcedureTest(ByVal strAS400ServerName As String, _
ByVal strCompany As String, _
ByVal decSerial As Decimal, _
ByVal strSerialCode As String, _
ByVal strSerialScan As String, _
ByVal decMasterSerialNumber As Decimal, _
ByVal strCustomerPart As String, _
ByVal strTakataPart As String, _
ByVal strCustomerRanNo As String, _
ByVal strCustomerAbv As String, _
ByVal strDestinationAbv As String, _
ByVal decQty As Decimal, _
ByVal strCreatDate As String, _
ByVal decVoidSerialNo As Decimal, _
ByVal strProductionLineNo As String, _
ByVal strProcType As String)
Dim sp As SqlPipe = SqlContext.Pipe
Dim strResult As Integer = 0
Dim strErrorText As String = String.Empty
Dim dsData As New DataSet
Dim parameter(15) As OleDbParameter
If Not strAS400ServerName Is Nothing And strAS400ServerName <> String.Empty Then
' Populate parameter collection
parameter(0) = (CreateParameter("PARM1", OleDbType.Char, 20, ParameterDirection.InputOutput, strAS400ServerName))
parameter(1) = (CreateParameter("PARM2", OleDbType.Char, 2, ParameterDirection.InputOutput, strCompany))
parameter(2) = (CreateParameter("PARM3", OleDbType.Decimal, 10, ParameterDirection.InputOutput, decSerial))
parameter(3) = (CreateParameter("PARM4", OleDbType.Char, 2, ParameterDirection.InputOutput, strSerialCode))
parameter(4) = (CreateParameter("PARM5", OleDbType.Char, 25, ParameterDirection.InputOutput, strSerialScan))
parameter(5) = (CreateParameter("PARM6", OleDbType.Decimal, 10, ParameterDirection.InputOutput, decMasterSerialNumber))
parameter(6) = (CreateParameter("PARM7", OleDbType.Char, 30, ParameterDirection.InputOutput, strCustomerPart))
parameter(7) = (CreateParameter("PARM8", OleDbType.Char, 15, ParameterDirection.InputOutput, strTakataPart))
parameter(8) = (CreateParameter("PARM9", OleDbType.Char, 15, ParameterDirection.InputOutput, strCustomerRanNo))
parameter(9) = (CreateParameter("PARM10", OleDbType.Char, 6, ParameterDirection.InputOutput, strCustomerAbv))
parameter(10) = (CreateParameter("PARM11", OleDbType.Char, 6, ParameterDirection.InputOutput, strDestinationAbv))
parameter(11) = (CreateParameter("PARM12", OleDbType.Decimal, 9, ParameterDirection.InputOutput, decQty))
parameter(12) = (CreateParameter("PARM13", OleDbType.Char, 10, ParameterDirection.InputOutput, strCreatDate))
parameter(13) = (CreateParameter("PARM14", OleDbType.Decimal, 10, ParameterDirection.InputOutput, decVoidSerialNo))
parameter(14) = (CreateParameter("PARM15", OleDbType.Char, 3, ParameterDirection.InputOutput, strProductionLineNo))
parameter(15) = (CreateParameter("PARM16", OleDbType.Char, 2, ParameterDirection.InputOutput, strProcType))
RunDB2Sp("FABLE.MAP", parameter, dsData)
If dsData.Tables.Count > 0 Then
dsData.Tables(0).TableName = "Supreeth"
Dim bitresult As String = dsData.Tables(0).Rows(0)(0).ToString()
Dim errorstring As String = dsData.Tables(0).Rows(0)(1).ToString()
' I am not sure here
SqlContext.Pipe.Send(bitresult)
SqlContext.Pipe.Send("No errors")
End If
Else
Throw New ArgumentException("AS400Db.GetAS400TraceabilityResult: AS400 server name is empty or invalid")
End If
End Sub
Public Shared Sub RunDB2Sp(ByVal strProcedure As String, ByRef parms As OleDbParameter(), ByRef dsData As DataSet)
'*********************************************
' Declare Variables
'*********************************************
Dim daAdaptor As OleDbDataAdapter
Dim cmdAS400 As OleDbCommand
'Dim dstestMe As New DataSet
Try
cmdAS400 = CreateCommand(strProcedure, parms)
daAdaptor = New OleDbDataAdapter(cmdAS400)
' Fill the Data Set
daAdaptor.Fill(dsData)
Catch expError As OleDbException
daAdaptor = Nothing
Finally
daAdaptor = Nothing
cmdAS400.Dispose()
'Me.Close()
End Try
End Sub
Public Shared Function CreateParameter(ByVal name As String, _
ByVal type As OleDbType, _
ByVal size As Integer, _
ByVal direction As ParameterDirection, _
ByVal paramValue As Object) As OleDbParameter
Dim param As OleDbParameter = New OleDbParameter
param.ParameterName = name
param.OleDbType = type
param.Size = size
param.Direction = direction
param.Value = paramValue
Return param
End Function
Private Shared Function CreateCommand(ByVal strProcedure As String, ByVal prams As OleDbParameter()) As OleDbCommand
Dim CmdSAS400 As OleDbCommand
Dim parameter As OleDbParameter
Dim connAS400 As OleDbConnection
connAS400 = New OleDbConnection("Provider=IBMDA400;Data Source=AHISERIESDEV1;User Id=****;Password=****;")
connAS400.Open()
CmdSAS400 = connAS400.CreateCommand()
CmdSAS400.CommandText = strProcedure
CmdSAS400.CommandType = CommandType.StoredProcedure
CmdSAS400.Parameters.Clear()
'CmdAS400.CommandTimeout = intTimeOut
If (prams Is Nothing) Then
Else
For Each parameter In prams
CmdSAS400.Parameters.Add(parameter)
Next
End If
Return CmdSAS400
End Function
I have a UI which supplies 16 parameters to my stored procedure , which in turn call another sored procedure on as400 which returns result set. So far i am able to send 16 parms and get the values in dataset.
My question here how would i send the result set to UI for display, please feel free to comment on any changes need to be made on code . I badly need to find a solution for this and i appreciate any feed backs
Thanks
View 3 Replies
View Related
Mar 11, 2008
This is related to:
How can I make some graphics drawings stick while others disappear?
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2905460&SiteID=1
Except that now I am trying to connect and update to an Microsoft SQL Server Database File (SqlClient) via VB 2008 Express; specifically a table called €œHexMap€? that contains some columns that I am ready to insert some row data into. Here is what my program should do:
As I hover over a hexagon map of the US a red flickering hexagon follows the location of my mouse cursor. If I click on a given hexagon, the program draws a permanent blue hexagon, and sends a new set of row data into my database. Such information as the name of the state, row, column, center x, and center y, etc. Here is a quick snapshot of this program in action:
http://farm4.static.flickr.com/3128/2325675990_4155edbdee_o.jpg
-sorry, I didn't capture the mouse cursor inside the red hexagon
I think I am missing something since I appear to be able to connect successfully to the database table. Unfortunately, I never see the changes in the database, when I try to Show Table Data (via Database Explorer). I am hoping someone will review my code snippet (below) and tell me what I am missing. What happens when I run this code is that it acts like it works just fine, except that I have no indication that any changes were actually affected.
Code Snippet
'======================================================================================
Dim CN As New SqlClient.SqlConnection()
Dim da As New SqlClient.SqlDataAdapter
'Consider using Me._adapter that is used already
CN.ConnectionString = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Mapboard.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True"
CN.Open()
'Use the following code to verify that a connection to the database has achieved
If CN.State = ConnectionState.Open Then
MsgBox("Workstation " & CN.WorkstationId & "connected to database " & CN.Database & "on the " & CN.DataSource & " server")
End If
Try
Catch ex As Exception MsgBox("FAILED TO OPEN CONNECTION TO DATABASE DUE TO THE FOLLOWING ERROR" & vbCrLf & ex.Message)
End Try
'use the Connection object to execute statements
'against the database and then close the connection
da = New SqlClient.SqlDataAdapter("select * from HexMap order by Territory", CN)
If CN.State = ConnectionState.Open Then CN.Close()
'==========================================================================
Dim rows As Integer
rows = 0
Dim CMD As New SqlCommand("INSERT HexMap (Hexagon, HexRow, HexCol, HexX, HexY, Territory) VALUES(HexCounter, CaptureRow,CaptureCol,Hx,Hy,Territory_ComboBox1.Text)", CN)
CN.Open()
rows = CMD.ExecuteNonQuery
If rows = 1 Then
MsgBox("Table HexMap updated successfully")
Else
MsgBox("Failed to update the HexMap table")
End If
If CN.State = ConnectionState.Open Then CN.Close()
'==========================================================================
Thanks for reviewing my code.
Technozoide
View 1 Replies
View Related
Feb 26, 2015
Is there a way to display a column alias as part of the result set column labels?
View 9 Replies
View Related
Jan 3, 2007
Any way to merge cells vertically in SSRS 2005? I know w can do it horizontally by right clik, then select "merge cells". How about vertically? Thanks.
View 3 Replies
View Related
May 31, 2007
Hello,
I have two tables with 250 columns each and I have a common column between the two. I need to merge them vertically to make it a bigger table. I mean I need a table with 500 columns. Both the tables have same no. of rows. I am lost on how to go about it. Any help would be really great.
View 1 Replies
View Related
Nov 11, 2005
My project is to automate testing of Stored Proceduresof type SELECT (at least for now).I want to create a table where each stored procedure'sinput parameter values are entered and in another tablethe expected result value(s) are entered when executedagainst a sample database containing manually enteredand verified data.My current problem is that the stored procedures' inputparameters range from none to 50 parameters (ok nowthat I think of it maybe this SP with 50 parameters is anINSERT SP; regardless let's assume I have SPs thatrequire 10-20-30+ parameters).My other problem is each stored procedures' returnedresult could fall into any of these four categories:- 1 row, 1 column- 1 row, many columns- many rows, 1 column- many rows, many columnsSo far I thought about 3 ways of storing the data:1- 1 large table with 50 columns that can hold variousnumber of input parameter values. Similar type of table forholding the output result for the four categories above.2- 1 small table holding one value per row. All kinds of joinswith other tables to indicate which SP and which column thevalue belongs to...3- 1 individual table per stored procedure, this way the numberof columns in the table would match exactly the number of inputparameters.Obviously the above 3 categories could apply both for the inputand output data.Now I'm still in research mode and I haven't decided on any choiceyet. And I know each approach has serious consequences; let's justsay they are all with some limitations.Has anyone dealt with this scenario before? This is the first time Ineed a table to hold various types of returned data.Just to give some numbers: possibly a few thousand SPs and verylikely each SP would have more than one test scenario.What would you suggest?Thank you
View 2 Replies
View Related
Jun 15, 2007
Hi All,
I would like to print a report that is 64x64 matrix. I want the columns to be narrow and the headings for the columns to be vertical like is possible in excel. The text for the heading fields also comes from a stored procedure.
I have hunted and pecked around but I cannot seem to find an option that sets the orientation of the text for a text box to vertical.
Is there one?
If not, does anyone have a suggestion as to how I can make these column headings vertical and nicely fomatted all the time? Again, looking for the same effect as in excel.
Thanks
View 4 Replies
View Related
Aug 23, 2007
Is it possible in the SSRS Report Designer to rotate a textbox to run vertically, or simply to rotate the text in a textbox ? I have only seen this done within axes lables of charts, but not text boxes.
Thanks in advance,
Kenny
View 1 Replies
View Related
Nov 29, 2004
I got one table with 3 columns = Column1, Column2, Column3
Sample Table
Column1 | Column2 | Column3
------------------------------------
A | 12 | 0
A | 13 | 2
B | 12 | 5
C | 5 | 0
Select Column1, Column2, Column3 as New1
Where Column1 = A AND Column2 = 12 AND Column3 = 0
Select Column1, Column2, Column3 as New2
Where Column1 = A AND Column2 = 12 AND Column3 >0
The only difference is one condition Column3 = 0 and another one Column3 > 0. This two condition is not an "AND" condition... but just two separate information need to be display in one table.
So how do i display the result in one table where the new Output will be in this manner
Column1 | Column2 | New1 | New2|
Thanks
View 3 Replies
View Related
Jun 18, 2015
I have a query that based 2 tables. I wrote a query with a left join on the base table but the result set returns multiple rows for each occurrence in the second table because of the left join. I want but to return all records from on table A and only matching records from table B which id but I would wan tit to keep return them vertically as the because it make it difficult to read when put in a spreadsheet. It want it to return the values horizontally so the rows are not increasing for each occurrence on table b.
View 5 Replies
View Related
Feb 12, 2008
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
View 3 Replies
View Related
May 18, 2015
I am using ssrs 2012 using sql server 2012. I have grouped by project name in the header now it is repeating horizontally i need to repeat it by vertically using project name  grouped by column.
I need this like below :
View 5 Replies
View Related
Apr 27, 2015
I have a table in which records are inserted daily and with them i am storing the dates also. Now in SSRS i need to show the data for one week . The format should be like :
<style type="text/css">
.tg {border-collapse:collapse;border-spacing:0;}
.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 9px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;}
.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 9px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;}
[Code] ....
In above example Business Name , Phase, Activity will repeat lonely but its work description will be generated in next section according to that business name and that date. How to achieve this task ? I have referred : [URL] ....
View 6 Replies
View Related
Oct 5, 2015
I am new in SSRS 2012.I have created a rdl,in this rdl, am having a row group.In this report, other two columns has multiple rows and some rows having data and some other rows doesn't have data.So I want to create rows when the row of that particular column has any data or need to merge vertically with the row having data and row don't have data of particular column along with the Common Row Group Data
View 5 Replies
View Related
Nov 7, 2007
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID
FROM tableU u
LEFT JOIN tableW w ON w.workgroupID = u.workgroupID
WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
View 1 Replies
View Related
Feb 25, 2012
When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.
result in Excel 2003 SQL OLE DB query
col-A col-B col-C
values...
Result with Query Analyzer and VBA Macro
col-c col-B col-A
values...
View 3 Replies
View Related
