when i use select :
select flattened
(select productid, $support from [model name].[table] )......
i have result with many record same.
so i write :
select flattened
(select distinct productid, $support from [model name].[table] )......
but when i run, it's error. ( don't know what error).
how can i do to get table record with not same record (loop)
note : it write in DTS and i use sql 2000
Hello, I want to do a DISTINCT SELECT query with more than one field, for example a ID field with a Type field, as if both fields make the primary key, like (ID 1 ,Type 1) ,( ID 1, Type 2) and (ID 2, Type 1) is ok but not (ID 1, Type1) and (ID 1,Type 1) if its not possible to do a distinct with more than one then what other techniques are possible to get the duplicate data out. the reason why I want to use distinct is that I can use that query to export that data to where both of these fields make the primary key.
Thanks in advance
I need to return the current case cost for every UPC in my table. In my current query I return case costs that have an effective date of today or earlier. The problem is that in my results, one UPC may have two or more case costs that were are effective <= GETDATE(). I can sort it by effective date (DESC) so I know the first of every UPC in my results will be the current effective case cost, but how do I modify my query so that in my result set I only get the first of every UPC?
Here is my query:
SELECT factCaseCosts.nUpcKey, factCaseCosts.dCaseCost, factCaseCosts.dtEffectiveDate
FROM factCaseCosts
WHERE (factCaseCosts.dtEffectiveDate <= GETDATE())
ORDER BY dtEffectiveDate DESC
Here is my current result set:
52023.762006-08-01 00:00:00
52023.762006-02-18 00:00:00
52123.762006-08-01 00:00:00
52123.762006-02-18 00:00:00
52230.362006-08-01 00:00:00
52230.362006-02-18 00:00:00
52323.762006-08-01 00:00:00
52323.762006-02-18 00:00:00
I only want the first 520 returned, the first 521 returned, the first 522 returned, and the first 523 returned.
How can I do this?
Thanks!
This is part of a query I have. I want to display the diagnosis code attached to a patient. Sometimes there are more than one which is why I have tried distinct. I am getting the message 'subquery returned more than 1 value...'
If I use MIN or MAX, its giving me the min possible diagnosis code alphabetically or the max, not the one actually assigned to the patient which is what I want.
(SELECT DISTINCT (Diagnosis.DiagnosisCode) FROM Diagnosis
LEFT OUTER JOIN CourseDiagnosis ON CourseDiagnosis.DiagnosisSer = Diagnosis.DiagnosisSer
LEFT JOIN Course ON Course.CourseSer = CourseDiagnosis.CourseSer
JOIN Patient ON Patient.PatientSer = Course.PatientSer
WHERE Diagnosis.ObjectStatus = 'Active' AND
Diagnosis.Description not like 'ERROR%' AND
Diagnosis.DiagnosisTableName not in ('RTDS Dates')),
Hello,
I'm reasonably new to SQL.
I have a table of information about meetings with various people. In it, I have the person's name and the date/time of the meeting (simplified example).
I need to write a query that SELECTs only the most recent meeting for each person.
Any ideas would be greatly appreciated.
Hi,I have a table as followingaa Text1 aa, Join Bytes!, 15267aa Text1 aa, Join Bytes!, 16598aa Text1 aa, Join Bytes!, 17568aa Text2 aa, Join Bytes!, 25698aa Text3 aa, Join Bytes!, 12258I have to write a query as follows ...SELECT DISTINCT TOP 500 fldText, fldContact, fldItemidFROM tableWHERE fldCat = 10 AND CONTAINS (fldText, 'Text1')In the example you can see the table has rows in which text and contact ordouble but with different itemid's. Now my employer wants me to show only 1row when text and contact or the same. He doesn't mind which itemid I show.... but I have to show one.I've an idea of how to do this using a cursor and a temporary table but Iguess that will be fatal for the performance because then I have to loopthrough all selected rows, check each row with all other rows and store theprimary key in the temporary table if dedected it isn't double. AfterwardsI can execute ... SELECT ... FROM TABLE where primary key in (selecttemp_primarykey from #temptable).I hoped I could do everything in 1 "easy" SELECT but I should not know how?Any ideas are much appreciated.Thanks a lot.Perre Van Wilrijk.
View 1 Replies View RelatedHi,
I wonder if its possible to perform a ORDER BY clause in an SELECT DISTINCT sql query whereby the AS SINGLECOLUMN is used. At present I am recieving error: ORDER BY items must appear in the select list if SELECT DISTINCT is specified. My guess is that I cant perform the Order By clauses because it cant find the columns individually. It is essentail I get this to work somehow...
Can anyone help? Thanks in advance
Gemma
Hi, I have the following script segment which is failing:
CREATE TABLE #LatLong (Latitude DECIMAL, Longitude DECIMAL, PRIMARY KEY (Latitude, Longitude))
INSERT INTO #LatLong SELECT DISTINCT Latitude, Longitude FROM RGCcache
When I run it I get the following error: "Violation of PRIMARY KEY constraint 'PK__#LatLong__________7CE3D9D4'. Cannot insert duplicate key in object 'dbo.#LatLong'."
Im not sure how this is failing as when I try creating another table with 2 decimal columns and repeated values, select distinct only returns distinct pairs of values.
The failure may be related to the fact that RGCcache has about 10 million rows, but I can't see why.
Any ideas?
Basically I'm running a number of selects, using unions to write out each select query as a distinct line in the output. Each line needs to be multiplied by -1 in order to create an offset balance (yes this is balance sheet related stuff) for each line. Each select will have a different piece of criteria.
Although I have it working, I'm thinking there's a much better or cleaner way to do it (I use the word better loosely)
Example:
SELECT 'Asset', 'House', TotalPrice * -1
FROM Accounts
WHERE AvgAmount > 0
UNION
SELECT 'Balance', 'Cover', TotalPrice
FROM Accounts
WHERE AvgAmount > 0
What gets messy here is having to write a similar set of queries where the amount is < 0 or = 0
I'm thinking something along the lines of building a table function contains all the descriptive text returning the relative values based on the AvgAmount I pass to it.
I need to run a SELECT DISTINCT query acrossmultiple fields, but I need to add another field that is NON-DISTINCTto my record set.Here is my query:SELECT DISTINCT lastname, firstname, middleinitial, address1,address2, city, state, zip, age, genderFROM gpresultsWHERE age>='18' and serviceline not in ('4TH','4E','4W')and financialclass not in ('Z','X') and age not in('1','2','3','4','5','6','7','8','9','0')and (CAST (ADMITDATE AS DATETIME) >= DATEDIFF(day, 60, GETDATE()))ORDER BY zipThis query runs perfect. No problems whatsoever. However, I need toalso include another field called "admitdate" that should be treatedas NON-DISTINCT. How do I add this in to the query?I've tried this but doesn't work:SELECT admitdateFROM (SELECT DISTINCT lastname, firstname, middleinitial, address1,address2, city, state, zip, age, gender from gpresults)WHERE age>='18' and serviceline not in ('4TH','4E','4W')and financialclass not in ('Z','X') and age not in('1','2','3','4','5','6','7','8','9','0')and (CAST (ADMITDATE AS DATETIME) >= DATEDIFF(day, 60, GETDATE()))ORDER BY zipThis has to be simple but I do not know the syntax to accomplishthis.Thanks
View 2 Replies View RelatedOK I have a Forum on my website make up of 3 tablesTopisThreadsMessageI show a list of the 10 most recent Changed Threads. My Problem is that my Subject field is in the messages Table, IF I link Threads to Messages then try to use Select Disticnt I get mutliple Subject fields as the messsges are not unique (obvisally) So I want to get the top 10 Threads by postdate and link to the Messages table to get the Subject headerAny help? Or questions to explain it better?
View 5 Replies View RelatedHello Everyone
Hopefully someone can help me create a SQL statement for this.
I need the ff: fields
Prov_ID, Record_ID, PROV_NAme, LOC_city, LOC_Zip_CODE, Specialty
Let say I have a table.
Prov_ID, Record_ID, PROV_NAme, LOC_city, LOC_Zip_CODE. Specialty1000 999 Mike James Plano 75023 Internal Medicine1000 998 Mike James Allen 75021 Internal Medicine3333 700 John Smith Arlington 70081 Dermatologist3333 701 John Smith Dallas 72002 Dermatologist2222 630 Terry Walker Frisco 75001 Optalmologist2222 632 Terry Walker Dallas 76023 Optalmologist4444 454 Tim Johnson San Anontio 72500 Internal Medicine 4444 464 Tim Johnson Frisco 72660 Internal Medicine
I want to select only "one" instance of the provider it doesnt matter what is selected
either the first address or the second address.
It should show
Prov_ID, Record_ID, PROV_NAme, LOC_city, LOC_Zip_CODE. Specialty1000 999 Mike James Plano 75023 Internal Medicine3333 700 John Smith Arlington 70081 Dermatologist2222 632 Terry Walker Dallas 76023 Optalmologist4444 464 Tim Johnson Frisco 72660 Internal Medicine
And yes, the table is not Normalized..Is there anyway I could get away with it without having to normalize?
Thanks
Lorenz
Is their a way to select all items from a table that are not distinct? Meaning, I want to know which items in a column occur more than once.
Example:
Suppose we have a table with student names, ss# and address. I want to display only records where their is more than one studen with the same name. So for example their could be ten people with the name of "Mike" in a class?
Ralph
I have a table myTable (ID, Year, Name, Note)data in this table:ID Year Name Note 1 2008 Petter hdjhs2 2008 Nute jfdkfd3 2007 Suna dkfdkf4 2007 Para jfdfjd5 2009 Ute dfdlkf Please help me to Select DISTINCT [Year]]ex:1 2008 Petter hdfdfd3 2007 Suna fdkfdk5 2009 Ute fkdfkdfd Thank!
View 3 Replies View RelatedCan I run Select distinct on one fieldname only while I'm selecting more than one fielname, like
Select Distinct col1, col2, col3 from table
I need distinct on col1 only and not on the other 2 columns, is it possible.
Thanks
Hi! I have 4 tables and they have a common column (eg. regionid). These
4 tables have data overlapping with the others. Some data exist in a table
but not on the others. What I want to do is to do a select that will display
all distinct regionid from these tables. It should be total of all the tables but will suppress any duplicates with the others.
Note that UNION is working but I can't use that. Why ? because UNION is not supported or maybe not working properly with RDB database. I'm doing an appliaction for heterogenous datasource.
Any tips, hints or info will be appreciated.
thanks in advance.
zrxowm
Table REGION1 :
RegionID RegionDescription
----------- --------------------------------------------------
10 Place1
11 Place11
1 Eastern
2 Western
3 Northern
4 Southern
(6 row(s) affected)
Table REGION2 :
RegionID RegionDescription
----------- --------------------------------------------------
21 Place21
22 Place22
1 Eastern
2 Western
3 Northern
4 Southern
(6 row(s) affected)
Table REGION3 :
RegionID RegionDescription
----------- --------------------------------------------------
33 Place33
31 Place31
1 Eastern
2 Western
3 Northern
4 Southern
(6 row(s) affected)
Table REGION4 :
RegionID RegionDescription
----------- --------------------------------------------------
41 Place41
42 Place42
1 Eastern
2 Western
3 Northern
4 Southern
(6 row(s) affected)
Does anyone know why this does not work?
SELECT DISTINCT tb2.column20 tb2.column20, tb1.column10, tb2.column21, tb2.column22, tb3.column30
FROM table1 tb1, table2 tb2, table3 tb3
WHERE tb1.column11 = 'P'
AND tb2.column23 = 'P'
AND tb1.column12 = tb2.column24
AND tb2.column25 = tb3.column31
ORDER BY tb2.column20
Its supposed to return only the distinct entries in tb2.column20
Can you have "Select Distinct" in Union Query,because that is what I am trying to do and this is the error message I get.
"The text, ntext, or image data type cannot be selected as DISTINCT."
I would need to do that because i have duplicate records,because these records are getting written into the db when templates are generated and sometimes if they double click it generates two and writes that many results as well, so that is why I was thinking that select distinct would solve my problem.
Thanks for your help
This is the query in question:
SELECT Distinct 'O' AS Origin, a.RecordID, a.RelocateID, a.SupplierID, a.DateIn, a.DateOut, a.NoOfDays, a.AgreeAmt, a.PaymentMethod, a.AccomType, a.Reason,
a.InvRecvd, a.RelocateeTempAccomTS, a.BedConfiguration, a.NumberOfPax, a.AdditionalItems, a.Currency, a.TotalAmount, a.EnteredBy,
a.LastModifiedBy, a.ReferenceNumber, a.Location, a.Comments, a.ArrivalTime, a.PONumber,CommissionRate, ISNULL
((SELECT TOP 1 ExchangeRateToUSD
FROM luCurrencyExchangeRates c
WHERE a.Currency = c.CurrencyID AND a.DateIn >= c.ActiveDate), 1.0) AS ForeignExchangeRate, ISNULL
((SELECT TOP 1 ExchangeRateToUSD
FROM luCurrencyExchangeRates c
WHERE 'AUD' = c.CurrencyID AND a.DateIn >= c.ActiveDate), 1.0) AS AUDExchangeRate, a.WhenConfirmed, e.RequestID AS RequestID,
e.DocumentID AS DocRequestID, e.RequestWhen AS RequestWhen, e.WhereClause AS WhereClause,
dbo.luDecisionMaker.DecisionMakerName AS DecisionMadeBy, dbo.viewZYesno.Description AS CommissionableDesc
FROM dbo.RelocateeTempAccom a LEFT OUTER JOIN
dbo.luDecisionMaker ON a.DecisionMaker = dbo.luDecisionMaker.DecisionMakerID LEFT OUTER JOIN
dbo.viewZYesno ON a.Commissionable = dbo.viewZYesno.[Value] LEFT OUTER JOIN
dbo.docRequests e ON '{RelocateeTempAccom.RecordID}=' + CONVERT(VARCHAR a.RecordID) = e.WhereClause
WHERE (ISNULL(a.Cancelled, 0) = 0)
UNION ALL
SELECT Distinct 'D' AS Origin, RecordID, RelocateID, DTASupplierID AS SupplierID, DTADateIn AS DateIn, DTADateOut AS DateOut, DTANoOfDays AS NoOfDays,
DTAAgreeAmt AS AgreeAmt, DTAPaymentMethod AS PaymentMethod, DTAAccomType AS AccomType, Reason, InvRecvd,
RelocateeDTATS AS RelocateeTempAccomTS, BedConfiguration, NumberOfPax, AdditionalItems, Currency, DailyTotal AS TotalAmount, EnteredBy,
LastModifiedBy, ReferenceNumber, Location, Comments, ArrivalTime, PONumber,CommissionRate, ISNULL
((SELECT TOP 1 ExchangeRateToUSD
FROM luCurrencyExchangeRates d
WHERE b.Currency = d .CurrencyID AND b.DTADateIn >= d .ActiveDate), 1.0) AS ForeignExchangeRate, ISNULL
((SELECT TOP 1 ExchangeRateToUSD
FROM luCurrencyExchangeRates d
WHERE 'AUD' = d .CurrencyID AND b.DTADateIn >= d .ActiveDate), 1.0) AS AUDExchangeRate, WhenConfirmed, e.RequestID AS RequestID,
e.DocumentID AS DocRequestID, e.RequestWhen AS RequestWhen, e.WhereClause AS WhereClause,
dbo.luDecisionMaker.DecisionMakerName AS DecisionMadeBy, dbo.viewZYesno.Description AS CommissionableDesc
FROM dbo.RelocateeDTA b LEFT JOIN
dbo.luDecisionMaker ON b.DecisionMaker = dbo.luDecisionMaker.DecisionMakerID LEFT JOIN
dbo.viewZYesno ON b.Commissionable = dbo.viewZYesno.[Value] LEFT OUTER JOIN
dbo.docRequests e ON '{RelocateeDTA.RecordID}=' + CONVERT(VARCHAR, b.RecordID) = e.WhereClause
WHERE ISNULL(Cancelled, 0) = 0
Hi,
I wonder if anyone here can shed some light on why the query below produces duplicate EmailAddress values even though we specify the DISTINCT clause.
SELECT DISTINCT(EmailAddress) SubscriberID, FirstName, Surname, SubscriberID
FROM TestMailingList
ORDER BY EmailAddress
Thanks.
Bahrudeen writes "Hi..
hw to use Select query for both distinct and *
(eg) select * , distinct(building_id) from g_building where
(condition)
i want all information with distinct building id..
give a solution
advance thanx..."
Hi,
I am new to this forum so hello to everyone!
I need some help getting unique records from a query, I have a large amount of nested selects and i want to only display distinct records, I have a unique identifier (party ID) but the code was written by someone else (who is on holiday!) and i need to work out where to insert the disctinct select (if at all? - open to a better way?) this query should pull back records and then the results are pasted in to excel, however would a DTS solve the issue with duplicates??
Any help more than appreciated!
Heres the code...
CREATE PROCEDURE dbo.negative_surplus_report
AS
SELECT dbo.Cubit_Override_ID.UserName AS [User], dbo.Cubit_Customers.RecordDateTime AS Date,
dbo.Cubit_Customers.Customer_Status AS [Customer Status], dbo.Cubit_Customers.Call_Prompted_By AS [Call Prompted By],
dbo.Cubit_Outcomes.Outcome_Description AS [Outcome], ISNULL(dbo.Cubit_EPH.Total_Balance, 0) AS [Egg Debt], ISNULL(dbo.Cubit_Debt.Income_Total,
0) AS Income, ISNULL
((SELECT SUM(Balance)
FROM Cubit_Debt_Card INNER JOIN
Cubit_Debt ON Cubit_Debt_Card.Debt_ID = Cubit_Debt.Debt_ID
WHERE Cubit_Debt.Cust_ID = Cubit_Customers.Cubit_Cust_ID), 0) AS [External Card Debt], ISNULL
((SELECT SUM(Balance)
FROM Cubit_Debt_Loan INNER JOIN
Cubit_Debt ON Cubit_Debt_Loan.Debt_ID = Cubit_Debt.Debt_ID
WHERE Cubit_Debt.Cust_ID = Cubit_Customers.Cubit_Cust_ID), 0) AS [External Loan Debt], ISNULL(dbo.Cubit_Spending.Out_Mortgage, 0)
AS [Mortgage Payment], ISNULL(dbo.Cubit_Spending.Out_Rent, 0) AS [Rent Payment], ISNULL(dbo.Cubit_Debt.Mortgage_Balance, 0)
AS [Mortgage Balance], ISNULL(dbo.Cubit_Debt.Property_Value, 0) AS Property, ISNULL(dbo.Cubit_Customers.Party_ID, '') AS [Party ID],
ISNULL(dbo.Cubit_Customers.Cubit_Cust_ID, '') AS [Cubit ID], ISNULL(dbo.Cubit_Spending.Out_Total, 0) AS Outgoings,
ISNULL(dbo.Cubit_EPH.Total_Monthly_Pmt, 0) AS [Egg Payments], ISNULL
((SELECT SUM(Monthly_Pmt)
FROM Cubit_Debt_Card INNER JOIN
Cubit_Debt ON Cubit_Debt_Card.Debt_ID = Cubit_Debt.Debt_ID
WHERE Cubit_Debt.Cust_ID = Cubit_Customers.Cubit_Cust_ID), 0) AS [External Card Paymements], ISNULL
((SELECT SUM(Monthly_Pmt)
FROM Cubit_Debt_Loan INNER JOIN
Cubit_Debt ON Cubit_Debt_Loan.Debt_ID = Cubit_Debt.Debt_ID
WHERE Cubit_Debt.Cust_ID = Cubit_Customers.Cubit_Cust_ID), 0) AS [External Loan Payments], dbo.Cubit_Debt.Income_Total -
(SELECT SUM(Monthly_Pmt)
FROM Cubit_Debt_Card INNER JOIN
Cubit_Debt ON Cubit_Debt_Card.Debt_ID = Cubit_Debt.Debt_ID
WHERE Cubit_Debt.Cust_ID = Cubit_Customers.Cubit_Cust_ID) -
(SELECT SUM(Monthly_Pmt)
FROM Cubit_Debt_Loan INNER JOIN
Cubit_Debt ON Cubit_Debt_Loan.Debt_ID = Cubit_Debt.Debt_ID
WHERE Cubit_Debt.Cust_ID = Cubit_Customers.Cubit_Cust_ID) - dbo.Cubit_Spending.Out_Total - dbo.Cubit_EPH.Total_Monthly_Pmt AS Surplus,
dbo.Cubit_Override_ID.Mandate_Level
FROM dbo.Cubit_Customers INNER JOIN
dbo.Cubit_Managers ON dbo.Cubit_Customers.Manager_ID = dbo.Cubit_Managers.Manager_ID INNER JOIN
dbo.Cubit_Areas ON dbo.Cubit_Managers.Area_ID = dbo.Cubit_Areas.Area_ID LEFT OUTER JOIN
dbo.Cubit_EPH ON dbo.Cubit_Customers.Cubit_Cust_ID = dbo.Cubit_EPH.Cust_ID LEFT OUTER JOIN
dbo.Cubit_Spending ON dbo.Cubit_Spending.Cust_ID = dbo.Cubit_Customers.Cubit_Cust_ID INNER JOIN
dbo.Cubit_Outcomes ON dbo.Cubit_Customers.Outcome_ID = dbo.Cubit_Outcomes.Outcome_ID LEFT OUTER JOIN
dbo.Cubit_Additional_MI_Data ON dbo.Cubit_Customers.Cubit_Cust_ID = dbo.Cubit_Additional_MI_Data.Cubit_Cust_ID INNER JOIN
dbo.Cubit_Override_ID ON dbo.Cubit_Customers.Input_By_NTID = dbo.Cubit_Override_ID.NT_ID LEFT OUTER JOIN
dbo.Cubit_Debt ON dbo.Cubit_Customers.Cubit_Cust_ID = dbo.Cubit_Debt.Cust_ID
WHERE (dbo.Cubit_Areas.Area_ID IN (2, 3, 4, 11, 12)) AND (dbo.Cubit_Customers.Non_Relevant_Call = 0) AND (dbo.Cubit_Customers.Spending_Assessed = 1)
AND (dbo.Cubit_Customers.Debt_Assessed = 1) AND (dbo.Cubit_Debt.Income_Total > 0) AND (dbo.Cubit_EPH.Total_Monthly_Pmt < 999999) AND
(dbo.Cubit_Debt.Income_Total -
(SELECT SUM(Monthly_Pmt)
FROM Cubit_Debt_Card INNER JOIN
Cubit_Debt ON Cubit_Debt_Card.Debt_ID = Cubit_Debt.Debt_ID
WHERE Cubit_Debt.Cust_ID = Cubit_Customers.Cubit_Cust_ID) -
(SELECT SUM(Monthly_Pmt)
FROM Cubit_Debt_Loan INNER JOIN
Cubit_Debt ON Cubit_Debt_Loan.Debt_ID = Cubit_Debt.Debt_ID
WHERE Cubit_Debt.Cust_ID = Cubit_Customers.Cubit_Cust_ID) - dbo.Cubit_Spending.Out_Total - dbo.Cubit_EPH.Total_Monthly_Pmt < 0) AND
(dbo.Cubit_Customers.RecordDateTime >= '04/11/2006')
ORDER BY dbo.Cubit_Areas.Area_ID, dbo.Cubit_Override_ID.UserName, dbo.Cubit_Customers.RecordDateTime, Cubit_Customers.Cubit_Cust_ID
Thanks!
Matt
SQL newbie!
Hello,
When I try the SELECT DISTINCT like this:
USE CHEC
SELECT DISTINCT
[DATE_CONVERSION_TABLE_NEW].MONTH,
DAY([DATE_CONVERSION_TABLE_NEW].[DISBURSEMENT DATE]) AS DayofMonth,
DAT01.[_@550] AS LoanType,
DAT01.[_@051] AS Branch,
DAT01.[_@TP] AS ProdTypeDescr,
SMT_Branches.[BranchTranType] AS TranType,
--SMT_Branches.[AUCode] AS AuCode,
COUNT(*) AS Totals
FROM DAT01 INNER JOIN [DATE_CONVERSION_TABLE_NEW]
--ON DAT01.[_@040] = [DATE_CONVERSION_TABLE_NEW].[DISBURSEMENT DATE]
ON DAT01.[_@040] = [_@040]
INNER JOIN SMT_BRANCHES
ON SMT_Branches.[BranchTranType] = SMT_BRANCHES.[BranchTranType]
WHERE
DAT01.[_@040] Between '06/01/2006' And '06/30/2006'
And SMT_BRANCHES.[BranchTranType] = 'RETAIL'
AND DAT01.[_@051] = '540'
--And SMT_Branches.[AUCode] = '1882'
And DAT01.[_@TP] = '115'
And DAT01.[_@550] = '3'
GROUP BY
DAT01.[_@051],
DAT01.[_@550],
DAT01.[_@TP],
SMT_Branches.[BranchTranType],
--SMT_Branches.[AUCode],
[DATE_CONVERSION_TABLE_NEW].MONTH,
DAY([DATE_CONVERSION_TABLE_NEW].[DISBURSEMENT DATE])
ORDER BY [DATE_CONVERSION_TABLE_NEW].MONTH,
DAT01.[_@051],
DayofMonth ASC
--SMT_Branches.[AUCode] ASC
--COMPUTE sum(count(*))
I get the same result set as before.
What do I need to change?
Kurt
Hi. I am trying to create a view where it will find out the sum of hours for each employee, for each month and year.
SELECT DISTINCT EmpId,
SUM(Hours) AS Hours,
YEAR(WeekStartDate) AS startyear,
MONTH(WeekStartDate) AS startmonth
FROM dbo.BankHours_History
GROUP BY EmpId, WeekStartDate
I have a select query
Select distinct a,b,c,d from xyz
I would like to know what the syntax is if I want only a,b,c to be distinct and not d.
I tried something like
Select (distinct a,b,c),d
but getting error what is the correct query to do this.
Please help.
I don't know what the correct syntax is to do what I want with the DISTINCTfunction (if it's actually possible).I have a query which displays a variety of fields from a variety of tables(pretty standard).However, I only want to show records where the contents of one particularcolumn in the query are unique - I do not want to perform the function onthe entire record because other fields in the records may be duplicated foras reason.
View 2 Replies View RelatedHi members,
Is there a way to count the number of data with distinct column a and column b (combination)??
ex
col A Col B
1 1
1 2
1 1
2 1
3 3
3 3
4 3
should give 5.
The ones in red are duplicates that I want to eliminate.
Thanks,
Hi
Just a question
I have a query that selects profile data for members, if I don€™t do a select distinct it gives me a lot of correct values, (unique values) of members i.e. only one record per member, but every now and then I get duplicate values for one member, multiple times.
Why does this occure?
I know SELECT DISTINCT is there to remove duplicates, but without SELECT DISTINCT why would this €śmistake€? happen?
Any help would be greatly appreciated.
I.e.
2 | 3 | John | Slack | Philips |5
1 | 2 | Jason | Limrick | Jones | 3
1 | 2 | Jason | Limrick | Jones | 3
1 | 2 | Jason | Limrick | Jones | 3
1 | 2 | Jason | Limrick | Jones | 3
1 | 2 | Jason | Limrick | Jones | 3
2 | 3 | Jane | John | Parker |4
Why would it create duplicate records if the values are the same?
Kind Regards
Carel Greaves
select distinct ISNULL (a.account,'') as "Account", ISNULL (c.address1,'') as "Address",
ISNULL (c.city,'') as "City", ISNULL (c.state,'') as "State",
ISNULL (c.postalcode,'') as "Zip Code", ISNULL (a.mainphone,'') as "Phone",
a.userfield1 as "GID", s.division
from sysdba.account as a
join sysdba.address as c on a.addressid = c.addressid
join sysdba.staff as s on a.accountid = s.accountid
where a.type like '%client%' and a.userfield1 is not null and (s.division like '%HR%' or s.division like '%db%') and s.type = 'client'
So what happens now is that if an account is listed in two division I get two distinct rows returned, but each with the same GID column. When I try to push this to a new database that has GID as the primary key I get duplicate on that column and it errors out.
I need to be able to get only a single row if the division is both HR and db. how to tackle this problem.
Thanks!
select ExpenseCodeID, [Group], SubGroup, GLAccount,ExpenseCode, ProjType
from BridgeFinance..OPS_ExpenseCodes
Order By ExpenseCode
I have this query only thing wrong with it is that I dont know how to only select different values from my expenseCode column that looks like below....I dont want to select "Employee Only Meals" as many times as it appears in the table just once do i want to select it....any help with how i should write my query would be great! thanks!
Administrative contract work
Cell phone
Courier/Shipping
Employee only Meals
Employee only Meals
Employee only Meals
Employee only Meals
Employee only Meals
Employee trans/parking
Health Club Memberships
Home Office Expenses
IT equipment-non capitalizable
I may be new at this but I can't find any explanation why
SELECT DISTINCT(Stno), Grade
shows distinct occurrences for each Stno-Grade combination rather than just distinct occurences of Stno. What is the solution?
Newbie question
SELECT DISTINCT F1, F2, F3, F4 FROM 'table name' returns distinct rows for whole table. Is there a way to just return distinct rows from say column F1 instead of all the fields. I suppose i could just do SELECT DISTINCT F1, but also would like to display other fields. Thanks in advance
Is there a way to do a Select Distinct on a single column in a result set?
Example:
Select Distinct(PersonID) PersonID, FirstName, LastName From People
Hello, I have the following tables: declare @B table (Bid int identity, description varchar(50)) declare @P table (Pid int identity, Bid int, description varchar(50)) declare @T table (Tid int identity, description varchar(50)) declare @TinP table (TinPid int identity, Tid int, Pid int) insert into @B (description) select 'B1' insert into @B (description) select 'B2' insert into @P (description, Bid) select 'P1', 1 insert into @P (description, Bid) select 'P2', 1 insert into @P (description, Bid) select 'P3', 2 insert into @T (description) select 'T1' insert into @T (description) select 'T2' insert into @T (description) select 'T3' insert into @TinP (Tid, Pid) select 1, 2 insert into @TinP (Tid, Pid) select 2, 2 insert into @TinP (Tid, Pid) select 3, 3 select * from @B select * from @P select * from @T select * from @TinP I need to get all records in T (Tid and description) which are related to a given BId So for @Bi = 1 I would get: Tid Description 1 T1 2 T2 So I need the distinct values. How to solve this? Thanks, Miguel
View 1 Replies View Related