hi friends
i have a query like this
query1="select co.*, ct.*, from contacts co, enquiries en, contactPersonType ct where co.co_contactId=en.en_contactId and co.co_contactType=ct.ct_contactTypeId"
i want to display only the contact persons details who made enquires.
this gives me duplicate records. im not displaying enquiry details. how can i use distinct with this?
thank you
neon
I have 3 tables:
News:
bigint NewId
nvarchar NewTitle
datetime NewDate
nvarchar NewBrief
--------------------------
Category:
int CatId
nvarchar CatName
--------------------------
NewsRelCategory:
bigint Id
int CategoryIdFk
bigint NewsIdFk
--------------------------
I want to select NewId, NewDate and Distinct NewTitle
I tried this but NewTitle doesn't distinct:
SELECT
FROM dbo.Category INNER JOIN
NewsRelCategory ON dbo.Category.CatId = NewsRelCategory.NrcCategoryIdFk INNER JOIN
dbo.News ON NewsRelCategory.NrcNewsIdFk = dbo.News.NewId
best way to go about this. My query works great and displays the information I require.
EG all demographic for ED, IP & OP. However if a patient has a record in each of the tables then I get the same info multiple times.
What I'm trying to do is a Select Distint against the entire query (below).
eg Select Distinct * from all below.
DECLARE @StartDate datetime = '01 oct 2015';
DECLARE @EndDate datetime = '30 OCT 2015';
--***OUTPATIENT DQ QUERY***--
SELECT distinct
HEYNo,
NHSNo2,
NHSNo1,
[code]....
I am trying to create a query that outputs the following data from multiple tables. Here is an example of the raw data right now
Date | MachineNumber | TestName
---------------------------------------
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 500 | Something
1/1/2015 | 510 | NewTest
1/1/2015 | 510 | NewTest
1/1/2015 | 510 | NewTest
1/1/2015 | 620 | Test#1
Here is the desired counted output, I would like to pull distinct Date, MachineNumber, TestName and then count how many times they occur in the raw data form.I do need to perform a case on the date because right now its in a datetime format and I only need the date.
Date | MachineNumber | TestName | TestOccuranceCount
-----------------------------------------------------------------
1/1/2015 | 500 | Something | 4
1/1/2015 | 510 | NewTest | 3
1/1/2015 | 620 | Test#555 | 1
I am pulling three columns with the same names from 8 different tables. What I need to display the date, machine & test name and count how many times a test was run on a machine for that date. I have a feeling this can be handled by SSAS but haven't built an analysis cube yet because I am unfamiliar with how they work. I was wondering if this is possible in a simple query. I tried to set something up in a #Temp table. Problem is the query takes forever to run because I am dealing with 1.7 Million rows. Doing an insert into #temp select columnA, columnB, columnC from 8 different tables takes a bit.
Hi, I have the following script segment which is failing:
CREATE TABLE #LatLong (Latitude DECIMAL, Longitude DECIMAL, PRIMARY KEY (Latitude, Longitude))
INSERT INTO #LatLong SELECT DISTINCT Latitude, Longitude FROM RGCcache
When I run it I get the following error: "Violation of PRIMARY KEY constraint 'PK__#LatLong__________7CE3D9D4'. Cannot insert duplicate key in object 'dbo.#LatLong'."
Im not sure how this is failing as when I try creating another table with 2 decimal columns and repeated values, select distinct only returns distinct pairs of values.
The failure may be related to the fact that RGCcache has about 10 million rows, but I can't see why.
Any ideas?
Hi! I have a general SQL CE v3.5 design question related to table/file layout. I have an system that has multiple tables that fall into categories of data access. The 3 categories of data access are:
1 is for configuration-related data. There is one application that will read/write to the data, and a second application that will read the data on startup.
1 is for high-performance temporal storage of data. The data objects are all the same type, but they are our own custom object and not just simple types.
1 is for logging where the data will be permanent - unless the configured size/recycling settings cause a resize or cleanup. There will be one application writing alot [potentially] of data depending on log settings, and another application searching/reading sections of data.
When working with data and designing the layout, I like to approach things from a data-centric mindset, because this seems to result in a better performing system. That said, I am thinking about using 3 individual SDF files for the above data access scenarios - as opposed to a single SDF with multiple tables. I'm thinking this would provide better performance in SQL CE because the query engine will not have alot of different types of queries going against the same database file. For instance, the temporal storage is basically reading/writing/deleting various amounts of data. And, this is different from the logging, where the log can grow pretty large - definitely bigger than the default 128 MB. So, it seems logical to manage them separately.
I would greatly appreciate any suggestions from the SQL CE experts with regard to my approach. If there are any tips/tricks with respect to different data access scenarios - taking into account performance, type of data access, etc. - I would love to take a look at that.
Thanks in advance for any help/suggestions,
Bob
Hi,
I have a table with the following example data
idcol1col2col3
----------------------------
1abcnullnull
1abcnullnull
1null123null
4alphanullnull
4alphanullgamma
1abc987null
I would want to reduce that somehow to
idcol1col2col3
-----------------------------
1abc123null
1abc987null
4alphabetagamma
First thing in my mind was distinct over multiple columns, but I haven't found any resource mentioning that possibility.
I don't immediatly see a way without (complex) looping.
Can anybody put me on the right track?
btw, I know that Id is not an id.
It's a table var that holds an id of a table combined with fields of other tables.
Hi guys, I'm hoping there's someone out there with more sql knowledge and experience than me. I'll try to explain everything.
I'm trying to create a select statement but i'm not gettting the required results mainly because i think its a very complicated select.
Here is the scenario.
The table has 12 columns
ProductID Colour MD01 MD02 MD03 MD04 MD05 MD06 MD07 MD08 MD09 MD010
The ProductID is naturally the unique key.
There is always a colour value. But there is not always a value in the MD columns. For example one Product may have values in MD01 MD02 MD03 MD04 MD05 whilst another has values in all MD columns.
My problem is thatI am trying to create a results list based upon selecting distinct values from the colour and md columns
In otherwords i can't have more than only one instance of a word appearing in the recordset list
I'm really struggling with this because there are only 6 colours so if i set distinct purely on 6 colours i only get back 6 rows.
When I try to set disctinct across all the MD columns it seems to ignore it and lists results for example in the table
ProductID Colour MD01 MD02 MD03 MD04 MD05 MD06 MD07 MD08 MD09 MD010
1 red car bike
2 blue bike car train
my select lists results as
red
car
bike
blue
bike
car
train
and it is as if it only carries out the distinct command across the row not across all columns for all rows if you see what i mean?
I need to be able to list all data from all rows that have values in the MD columns and colour column but not list the values more than once and not list "empty" (NULL) columns. Does this make sense?
This is the select statement i wrote.
Select DISTINCT md00, md01, md02, md03, md04, md05, md06, md07, md08, md09, md10, colour FROM TEMPLATES WHERE md00 IS NOT NULL or md01 IS NOT NULL or md02 IS NOT NULL or md03 IS NOT NULL or md04 IS NOT NULL or md05 IS NOT NULL or md06 IS NOT NULL or md07 IS NOT NULL or md08 IS NOT NULL or md09 IS NOT NULL or md10 IS NOT NULL
But it returns empty columns and it returns every instance of the same word so in other words the distinct command doesn't seem to be working at all?
I don't know if this is because of my asp code I am trying to list results with the rescordset?
<%
While ((Repeat1__numRows <> 0) AND (NOT template_rs.EOF))
%>
<%=(template_rs.Fields.Item("md01").Value)%>
<%=(template_rs.Fields.Item("md02").Value)%>
<%=(template_rs.Fields.Item("md03").Value)%>
<%=(template_rs.Fields.Item("md04").Value)%>
<%=(template_rs.Fields.Item("md05").Value)%>
<%=(template_rs.Fields.Item("md06").Value)%>
<%=(template_rs.Fields.Item("md07").Value)%>
<%=(template_rs.Fields.Item("md08").Value)%>
<%=(template_rs.Fields.Item("md09").Value)%>
<%=(template_rs.Fields.Item("md10").Value)%>
<%=(template_rs.Fields.Item("colour").Value)%>
<%
Repeat1__index=Repeat1__index+1
Repeat1__numRows=Repeat1__numRows-1
template_rs.MoveNext()
Wend
%>
I have one more problem. How can I also in addition to being able to list all distinct results list only results for a specific letter
for example
Select DISTINCT md00, md01, md02, md03, md04, md05, md06, md07, md08, md09, md10, colour FROM TEMPLATES WHERE md00 IS NOT NULL or md01 IS NOT NULL or md02 IS NOT NULL or md03 IS NOT NULL or md04 IS NOT NULL or md05 IS NOT NULL or md06 IS NOT NULL or md07 IS NOT NULL or md08 IS NOT NULL or md09 IS NOT NULL or md10 IS NOT NULL WHERE FIRST LETTER ='A'?
I am so far out of my depth here guys I am hoping that someone who has real knowledge of SQL can help me with this statement. I've been pulling my hair out for days now and getting just more and more frustrated listing the same results :(
-BB
Hi all...I have a table in which some columns has distinct values and some hasduplicates..i wan to select all the columns with distinct values....noproblem if rows has null value in it....i tried a lot wit distinct andgroup by but nothing got worked out...Waitin for your reply.....Thanking you...
View 2 Replies View RelatedI want to build query to return how many rows are in this query:select distinct c1, c2 from t1But SQL won't accept this syntax:select count (distinct c1, c2) from t1Does someone know how to count multiple distinct columns? Thanks.--Disclaimer: This post is solely an individual opinion and does not speak onbehalf of any organization.
View 3 Replies View RelatedHere's an example of what I am trying to do...
Table1: id, name, title,...
Table2: id, regionID, region,...
t1 has a 1 to many relationship to t2
(no keys on t2)
SELECT DISTINCT t1.name, t1.title
FROM table1 t1 INNER JOIN
table2 t2 ON t1.id = t2.id
That works fine... Now, I want to include a third table...
Table3: regionID , RegionName, location,...
SELECT DISTINCT t1.name, t1.title, t3.RegionName
FROM table1 t1 INNER JOIN
table2 t2 ON t1.id = t2.id INNER JOIN
table3 t3 ON t2.regionID = t3.regionID
A sample result would be....
Bill, Owner, England
Jim, Owner, France
Jim, Owner, Spain
However, I would like to only list the individuals (ie. Jim, Owner) one time! Only the first 2 fields (name, title) need to be distinct. How do I reference the third table without including it in the DISTINCT keyword?
Any guidance would be appreciated.
Thanks,
Andrew
I have a Select Distinct myfield that returns multiple rows with same value for myfield when it should only one. Why is this happening?
View 4 Replies View RelatedI'm exporting the following query to a datagrid, however in the result set, some values are duplicated (for various reasons... mostly old software and poor categorization)...On the records with identical values, I want to look at the account number and the DateOfService fields and search for joint distinct values and only display that...Current Example: ACCT NUM | DATE OF SERVICE |________________________________ 43490 | 10/01/2006 08:15:23 | 35999 | 10/10/2005 12:00:00 | 35999 | 10/24/2005 12:45:30 | 35999 | 10/10/2005 12:00:00 | 35999 | 10/10/2005 12:00:00 | 23489 | 10/15/2006 15:13:23 |Desired Result: ACCT NUM | DATE OF SERVICE |________________________________ 43490 | 10/01/2006 08:15:23 | 35999 | 10/10/2005 12:00:00 | 35999 | 10/24/2005 12:45:30 | 23489 | 10/15/2006 15:13:23 |Here is the query I'm working with... just can't figure out how to join or limit the results to ONLY unique matches in Acct Number AND DateOfService. "SELECT tblCH.ProcedureKey AS CPT, tblPC.Description, DATEDIFF(d, tblPat.BirthDate, " & _ " { fn NOW() }) / 365 AS Age, tblPat.LastName, tblPat.FirstName, tblPat.BirthDate," & _ " CAST(tblCH.AccountKey AS varchar) + '.' + CAST(tblCH.DependentKey AS varchar) AS Account, tblCH.DateOfService " & _ " FROM dbo.Procedure_Code___Servcode_dat tblPC INNER JOIN " & _ " dbo.Charge_History___Prohist_dat tblCH ON tblPC.ProcedureKey = tblCH.ProcedureKey RIGHT OUTER JOIN " & _ " dbo.Patient_Info___Patfile_dat tblPat ON tblCH.AccountKey = (tblPat.AccountKey AND tblCH.DependentKey) = tblPat.DependentKey "Any suggestions from y'all SQL gurus? I have to have this report ready for production by tomorrow morning and this is the last fix I need to make =Thank you =)
View 6 Replies View RelatedI have 3 table as below:
DSF
dsf_id
company_name
incorporation_date
secretary_name
ShareholdersDetails
shareholder_id
dsf_id
shareholder_name
DirectorsDetails
directors_id
dsf_id
directors_name
one company can have multiple shareholders and directors records.
i create a search query where users might search by company name, secretary name , shareholder name or directors name.
My select query is like below:
Code:
SELECT dsf.dsf_id, dsf.company_name,
dsf.incorporation_date, dsf.secretary_name,
s.shareholders_name, d.directors_name
FROM tbl_dsf dsf
LEFT OUTER JOIN tbl_directors d on dsf.dsf_id = d.dsf_id
LEFT OUTER JOIN tbl_shareholders s on dsf.dsf_id = s.dsf_id
[WHERE CONDITION]
The result for above query would be like:
Code:
abc | 1/2/1999 | william | marry | donna
abc | 1/2/1999 | william | jenna | donna
abc | 1/2/1999 | william | jolly | donna
abc | 1/2/1999 | william | marry | dolly
abc | 1/2/1999 | william | jenna | dolly
abc | 1/2/1999 | william | jolly | dolly
Is it possible to achive result as below:
Code:
abc | 1/2/1999 | william | marry,jenna,jolly | donna,dolly
Thanks
Hello !
for MS SQL 2000
SELECT tableA.idA, tableB.idB,tableB.ColX,tableA.ColA,
tableA.ColB, tableA.ColC
FROM tableB RIGHT OUTER JOIN tableA ON tableB.idB = tableA.idA
I want to do a DISTINCT on
tableB.ColX, tableA.ColA, tableA.ColB
to return only the rows tableB.ColX, tableA.ColA, tableA.ColB which are differents
thank you for helping
hello I am trying to get a distinct on one column and 2 tables but it doesnt work
Table1
ID_Table1
Name1
Number1
Table2
ID_Table2
ID_Table1
Name2
I want to get : ID_Table1, DISTINCT(Name1), Name2
WHERE Name1 LIKE 'A%'
how can I do it ?
thank you
// C - Categories, P - Parameters, CP_Link - linkage table between C and P
// Basically, it is a list of features belonging to a particular category.
DROP TABLE [C];
CREATE TABLE [C] (
ID_CAutoinc,
Name varchar(32),
PRIMARY KEY( ID_C )
[code]....
OK, this works fine, but I want to get a list of parameters (from P table) which holds only those items that linked to all categories requested. In other words, I want only 'leg' and 'hand', but not the 'beard', because 'girls' not linked to 'beard'.Only common features for all of categories listed "IN (,,,)" wanted.
Attached is my select query, but it is returning the database values twice.
Can anyone tell me how I tell it to stop! A sub query I guess....
SELECT DISTINCT
dbo.Lead_Entry.Lead_ID, dbo.Lead_Entry.Lead_Source, dbo.Lead_Entry.Lead_Approved, dbo.Lead_Entry.Solution, dbo.Lead_Entry.Lead_Date,
dbo.Customer_Company.Company_Name, dbo.Customer_Contacts.Contact_Name
FROM dbo.Customer_Contacts INNER JOIN
dbo.Customer_Company ON dbo.Customer_Contacts.Company_ID = dbo.Customer_Company.Company_ID CROSS JOIN
dbo.Lead_Entry
I have a CTE returning a recordset which contains a column SRC. SRC is a number which I use later to get counts and sums for the records in a distinct list.
declare@startdate date = '2014-04-01'
declare@enddate date = '2014-05-01'
; with SM as
(
SELECT --ROW_NUMBER() OVER (PARTITION BY u.SRC ORDER BY u.SRC) As Row,
u.SRC,
[Code] ....
-- If Referral start date is between our requested dates
ref.Referral_Start_Date between @startdate and @enddate
OR
-- Include referrals which started before our requested date, but are still active during our date range.
(ref.Referral_Start_Date < @startdate and (ref.Referral_End_Date > @startdate OR ref.Referral_End_Date IS NULL ))
)
INNER JOIN c_sdt s on s.Service_Delivery_Type_Id = u.Service_Delivery_Type_Id
AND s.Service_Delivery_Unit_Id = 200
)
SELECT
count(distinct (case SRC when 91 then client_number else 0 end)) As Eligable_91,
[code]....
Hello,
I was wondering if anyone can explain the positives and negatives of using a single stored procedure that contains one or more distinct queries. I know there are problems with dynamic SQL but I am not proficient enough to know whether this falls under that umbrella.
For clarification, what I am referring to is this: In a single stored procedure, I have a parameter called Query_ID that is used to identify which query in the sproc that I want to execute. Then from my ASP page, I simply pass the appropriate value for Query_ID. So:
IF @QUERY_ID = 1
BEGIN
SELECT [whatever]
FROM [tbl1]
WHERE [conditions]
GROUP BY [something]
ORDER BY [somethingelse]
END
ELSE
IF @QUERY_ID = 2
BEGIN
SELECT [whatever]
FROM [tbl2]
WHERE [conditions]
GROUP BY [something]
ORDER BY [somethingelse]
END
END
I hope that makes sense. Thanks in advance.
I am attempting to run the following select statement joining multiple tables but in the end result I would like only Distinct/Unique values to be returned in the invlod.lodnum column.
[select pw.schbat, adrmst.adrnam, adrmst.adrln1, adrmst.adrcty, adrmst.adrstc, adrmst.adrpsz,
invlod.lodnum,
shipment.host_ext_id, shipment_line.ordnum, car_move.car_move_id
from aremst join locmst
on (aremst.arecod = locmst.arecod)
and (aremst.wh_id = locmst.wh_id)
[Code] .....
Hello everybody,
have following problem:
I need info from 2 Tables. from the Table 2 I just need 1 column. When i ask for this column the output I get is data repeating themselve many times.
Distinct, should give me unique data, but is doesnt....
the code:
SELECT DISTINCT FSenddate, FSupplyIDName, FSupplyerNumber,FBillNo,FSourceBillNo,FItemName,FItemModel,
FAuxQty,FAuxTaxPrice,FHeadSelfP0237
FROM vwICBill_26
WHERE FSenddate BETWEEN DATEADD(dd,-14,GETDATE()) AND GETDATE()
This code just works in Table1 (vwICBill_26)
but with table 2 (vwICBill_1)
SELECT DISTINCT vwICBill_26.FSenddate,vwICBill_26.FSupplyIDName,
vwICBill_26.FSupplyerNumber,vwICBill_26.FBillNo,
vwICBill_26.FSourceBillNo,vwICBill_26.FItemName,
vwICBill_26.FItemModel,vwICBill_26.FAuxQty,
vwICBill_26.FAuxTaxPrice,vwICBill_26.FHeadSelfP0237,
vwICBill_1.FDate,vwICBill_1.FContractBillNo
FROM vwICBill_26,vwICBill_1
WHERE vwICBill_26.FSenddate BETWEEN DATEADD(dd,-14,GETDATE()) AND GETDATE()
AND vwICBill_1.FContractBillNo=vwICBill_26.FSourceBillNo
The last sentence is the problem
I want that it shows me the data that is not equal.
As soon as I implement the not equal it shows me the massive repeating data.
I mean even without the last sentence I get this data output.
All together, I want a clear database output without data repeating.
Any ideas how it may work without DISTINCT?
I think this problem is a typical amateure problem, but I would apreciate help!
I need to get all distinct values from 10 different tables that exist in the field [favoritesport] And each table holds close to 50K records so I am looking at 500,000 records to get distinct values for. Would the fastest, less intrusive way of achieving this be to just create a UNION ALL so run
Select Distinct([favoritesport]) from table1
Union
Select Distinct([favoritesport]) from table2
Union
Select Distinct([favoritesport]) from table3
etc etc etc
One of my varchar columns in a table has multiple key words enclosed in a pattern of special characters.
Eg: William Shakespeare was an English [##poet##], [##playwright##], and [##actor##], widely regarded as the greatest [##writer##] in the English language and the world's pre-eminent [##dramatist##]. He is often called England's national [##poet##] and the "Bard of Avon". His extant works, including some collaborations, consist of about 38 plays, 154 [##sonnets##], two long narrative [##poems##], and a few other [##verses##], of which the authorship of some is uncertain. His plays have been translated into every major living language and are performed more often than those of any other [##playwright##].
I need to write to query to find all distinct key words that are enclosed within [## and ##]. My query should yield the following results from the string in the example above
[##actor##]
[##dramatist##]
[##playwright##] -- 2 occurrances, but I need it only once in my result set
[##poems##]
[##poet##] -- 2 occurrances, but I need it only once in my result set
[##sonnets##]
[##verses##]
[##writer##]
I need to run this on a large table, so I am looking for the best possible way to minimize any performance issues.
Just give you sample code, I have provided below 2 separate snippets, one with table variable and another with temp table.
DECLARE @MyTable TABLE (MyString VARCHAR (8000))
INSERT @MyTable VALUES ('William Shakespeare was an English [##poet##], [##playwright##], and [##actor##], widely regarded as the greatest [##writer##] in the English language and the world''s pre-eminent [##dramatist##]. He is often called England''s national [##poet##] and the "Bard of Avon". His extant works, including some collaborations, consist of about 38 plays, 154 [##sonnets##], two long narrative [##poems##], and a few other [##verses##], of which the authorship of some is uncertain.
[code].....
12.) Now you have two different tables - each with two columns.Table #1Single Column2 rows with a value equal to 1 and 2Table #2Single column2 rows with a value equal to 2 and 4Construct a statement returning in a single column all the valuescontained, but not the common values.This is another question that I got in an interview, I missedit.......Thanks,Tim
View 1 Replies View RelatedI have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.
Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.
I have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS.
E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.
I have just taken over the job of sorting out a rather poorly designed database. It looks like it was 'upsized' from an access database to the SQL server. The SQL server is the 2000 version.
Now I am trying to generate a report of what the students in the database are owing by referencing the Receipt table and then all the available payment methods and allocations. I was wondering if there was anyway to work out data being displayed twice (Let me demonstrate)
Note1: All the tables are linked by a key of ReceiptNo. From what I can see there is a table for every payment type and allocation but no link between the two other then the receipt number.
Using the query:
SELECT T_Receipt.ReceiptNo, T_cheque.Amount AS Chq_Amount, T_credit.Amount AS Cre_Amount, StandingOrder.Amount AS Stn_Amount,
T_BankTransfer.amount AS Bnk_Amount, T_cash.TotalAmount AS Cas_Amount, T_RentPayment.AmountPayed AS Ren_Paid,
T_AdminPayment.AmountPaid AS Adm_Paid, T_InternetBilling.Total AS Int_Paid, T_Utilities.AmountPaid AS Util_Amount,
T_InvoicePayment.amountPaid AS Inv_Paid, T_OtherPayments.paymentAmount AS Oth_Paid, T_parkingBill.paymentAmount AS Prk_Paid,
T_TelephoneBills.TelephoneCredit AS Tel_Paid, T_DepositPayment.[Deposit payment] AS Dep_Amount, T_Receipt.cancelled AS Canceled,
T_Receipt.RemittanceReceiptNo AS Rec_Ref, T_Receipt.Student
FROM T_Receipt INNER JOIN
T_DepositPayment ON T_Receipt.ReceiptNo = T_DepositPayment.receiptNo LEFT OUTER JOIN
T_RentPayment ON T_Receipt.ReceiptNo = T_RentPayment.RentPaymentNo LEFT OUTER JOIN
StandingOrder ON T_Receipt.ReceiptNo = StandingOrder.ReceiptNo LEFT OUTER JOIN
T_TelephoneBills ON T_Receipt.ReceiptNo = T_TelephoneBills.ReceiptNo LEFT OUTER JOIN
T_parkingBill ON T_Receipt.ReceiptNo = T_parkingBill.ReceiptNo LEFT OUTER JOIN
T_OtherPayments ON T_Receipt.ReceiptNo = T_OtherPayments.ReceiptNo LEFT OUTER JOIN
T_InvoicePayment ON T_Receipt.ReceiptNo = T_InvoicePayment.receiptNo LEFT OUTER JOIN
T_cash ON T_Receipt.ReceiptNo = T_cash.ReceiptNo LEFT OUTER JOIN
T_AdminPayment ON T_Receipt.ReceiptNo = T_AdminPayment.ReceiptNo LEFT OUTER JOIN
T_BankTransfer ON T_Receipt.ReceiptNo = T_BankTransfer.receiptNo LEFT OUTER JOIN
T_Utilities ON T_Receipt.ReceiptNo = T_Utilities.receiptNo LEFT OUTER JOIN
T_credit ON T_Receipt.ReceiptNo = T_credit.ReceiptNo LEFT OUTER JOIN
T_cheque ON T_Receipt.ReceiptNo = T_cheque.ReceiptNo LEFT OUTER JOIN
T_InternetBilling ON T_Receipt.ReceiptNo = T_InternetBilling.ReceiptNo
GROUP BY T_Receipt.Student, T_Receipt.ReceiptNo, T_cheque.Amount, T_credit.Amount, StandingOrder.Amount, T_BankTransfer.amount, T_cash.TotalAmount,
T_AdminPayment.AmountPaid, T_InternetBilling.Total, T_Utilities.AmountPaid, T_InvoicePayment.amountPaid, T_OtherPayments.paymentAmount,
T_parkingBill.paymentAmount, T_TelephoneBills.TelephoneCredit, T_Receipt.cancelled, T_Receipt.RemittanceReceiptNo,
T_DepositPayment.[Deposit payment], T_RentPayment.AmountPayed, T_Receipt.Student
HAVING (T_Receipt.Student LIKE N'06%')
Which gives a result of:
RecNo.
30429
Cheque
250
Deposit
250
30429
679.98
250
This is fine but when I do analysis on this it appears as though the student has paid two deposit payments. I was wondering with out querying each table independently from an application if there was a criteria to specify that I only get one deposit result.
So as such say, give me all the payments but I only want one result from the other tables. I though about discrete but that wouldn't work here.
Hi!
I have 7 source databases and one target database, all using the same structure. The structure is made of 10 tables, with foreign key constraints.
I need to merge the source databases into the target (which won't have any data before that process, but will already have the correct schema), and to keep the relationships between the records.
I know how to iterate over the source databases (with SMO foreach), but I'd like to know if someone can advise the best copy method for that context in SSIS ? (I don't want to keep the primary keys, but I need to keep the relationships...)
Any pointer most welcome!
best regards and thanks
Thibaut
I have a couple of hundred flat files to import into database tables using SSIS.
The files can be divided into groups by the format they use. I understand that I could import each group of files that have a common format at the same time using a Foreach Loop Container.
However, the example for the Foreach Loop Container has multiple files all being imported into the same database table. In my case, each file needs to be imported into a different database table.
Is it possible to import each set of files with the same format into different tables in a simple loop? I can't see a way to make a Data Flow Destination item accept its table name dynamically, which seems to prevent me doing this.
I suppose I could make a different Data Flow Destination item for each file, in the Data Flow. Would that be a reasonable solution, or is there a simpler solution, or should I just resign myself to making a separate Data Flow for every single file?
Hello
I am building a survey application.
I have 8 questions.
Textbox - Call reference
Dropdownmenu - choose Support method
Radio button lists - Customer satisfaction questions 1-5
Multiline textbox - other comments.
I want to insert textbox, dropdown menu into a db table, then insert each question score into a score column with each question having an ID.
I envisage to do this I will need an insert query for the textbox and dropdownlist and then an insert for each question based on ID and score.
Please help me!
Thanks
Andrew
How to insert single row/multiple rows into multiple tables by using single insert statement.
View 1 Replies View RelatedI need to be able to bulk insert a bunch of tables from their corresponding flat file. I have created an XML file (see below) which has the file name/table name pair at each node. I then created a ForEachLoop task and used the Node enumeration type and the following OuterXpathString: ReferenceFiles/File. At this point I get lost. How do I pass the 2 inside node values (file name and table name) to variables which I can then use as expressions for the bulk insert task inside the Foreach?
Here is XML file:
Code Snippet
<ReferenceFiles>
<File>
<FileName>Ref_Categories.txt</FileName>
<TableName>Ref_Categories</TableName>
</File>
<File>
<FileName>Ref_Configs.txt</FileName>
<TableName>Ref_Configs</TableName>
</File>
</ReferenceFiles>
Thanks.