18275 :
Unnamed tape (Family ID: 0xcfb8a96c, sequence 1) dismounted from tape drive ‘master tape backup’.
this also happens for the mounted part also, how do I name a tape drive? or stop these warnings in the event logs?
thanks for your help
How to solve the problem of Warning message 'Fail Components' and 'redirect row' when doing text mining?
thanks
Hi
Can anyone tell me what this warning message in the Quotes below...
I get this on one of our servers every 15 minutes in the event Viewer..
Here is the message in the event Viewer..
"Replication of license information failed because the License Logging Service on server PSNJRPDC could not be contacted."
Thanks All,
Venu
Hello,
I have been trying to drill down to the cause for this event log message:
"The configuration of the AdminConnectionTCP protocol in the SQL instance
SQLEXPRESS is not valid."
It is reported from the SQLBrowser service as a warning when the service
starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no
errors. I have seen this error on three computers. Two are running SQL 2000, 2005
and Express. One was only running Express, but still this message.
I then looked into the log for the SQL Express server itself. It shows this
message on startup:
"Dedicated administrator connection support was not started because it is
not available on this edition of SQL Server. This is an informational message
only. No user action is required."
Now, it appears to me that these two messages may relate to the same
"error" (or rather behaviour by design). So, can anyone confirm that the
warning in the event log from the SQL Browser service occurs becuase of that
the SQL Express edition doesn't allow any "AdminConnection", but the SQL
Browser service isn't aware of that SQL Express edition shouldn't support that, and
reports it as a warning (implying that we can't do much about this warning)?
Thanks for any input on this issue!
Recently we migrated our environment to 2012.
We are planning to implement Xevents in all the servers in place of Trace files and everything is working fine.
Is it possible to configure Extended event to trigger a mail whenever any event (example dead lock) occurs.
I have gone through so many websites but i never find.
My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date  10/25/2011 10:55:46 AM
Log  SQL Server (Current - 10/25/2011 10:55:00 AM)
Source  spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Â
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
I have been testing with the WMI Event Watcher Task, so that I can identify a change to a file.
The WQL is thus:
SELECT * FROM __InstanceModificationEvent within 30
WHERE targetinstance isa 'CIM_DataFile'
AND targetinstance.name = 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\AdventureWorks.bak'
This polls every 30 secs and in the SSIS Event (ActionAtEvent in the WMI Task is set to fire the SSIS Event) I have a simple script task that runs a message box).
My understanding is that the event polls every 30 s and if there is a change on the AdventureWorks.bak file then the event is triggered and the script task will run producing the message.
However, when I run the package the message is occurring every 30s, meaning the event is continually firing even though there has been NO change to the AdventureWorks.bak file.
Am I correct in my understanding of how this should work and if so why is the event firing when it should not ?
I have 2 aspx pages. one is "login.aspx" and the second is "test_connection.aspx". the "login.aspx" is using the membership class for my website's security. if u have have restarted your computer and you first load this "login.aspx", this will work fine and you will see that you can create a user. when you load (or view) next "test_connection.aspx" you will get this error message:
System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.
Login failed for user 'sqluser1'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
If I will restart my computer and I will load first the "test_connection.aspx", this page will work just fine and if you will load next "login.aspx", i will get this error message:
Cannot open user default database. Login failed.
Login failed for user 'YECIAASPNET'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.
Login failed for user 'YECIAASPNET'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
the page "test_connection.aspx" is using an sql username i have created. I am only using one database in this project and thats it ASPNET.mdf
what's happening? i cant understand. I dont know what im doing wrong. i am very new to this dotNET and MS-SQL. im not sure if this has relation to the other problem i have on the other thread (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=254568&SiteID=1).
PLS HELP.
Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
i was working on a production server, and have stopped the sqlserver service along with the sql server agent. since i had to copy a MDF file . now i started the service again . but i find that there are no transactions happening ....what could be the reason.
View 8 Replies View RelatedHi,
Im facing one problem When more than one user tries to insert record through the application only one users data is getting inserted. Wat might be the problem?
This is the stored proc im using..
create
proc [dbo].[GSK_insertregion] (@Country varchar(50),@Userid int,@RegionId varchar(50))
as
begin
insert
into UserHierarchy(Country,Userid,RegionId) values(@Country,@Userid,@RegionId)
end
Please help..
Sundaresan.R
Hi,
I set up my package for logging to SQL Server. I set up a connection manager for the logging, but did not specify a database. Doesn't that mean that the logging should default to msdb.sysdtslog90?
But when I check the table, there's nothing in it, after I run the package.
What gives?
Hi
I have deployed a website on a server having Windows2000, IIS5.0 . It uses SQL Server 2000 which is on another remote server. While developing I used the visual tools in VS.net to make a connection and have used DYnamic properties of the connection object to map the connection string to the entry in to the config file.
This works fine on my developement machine which has IIS and SQL Server 2000 on the same machine.
The entry in the web.config for my connection string is:
value= " server=xxx.yyy.com; Trusted_Connection=yes;provider=SQLOLEDB.1;Initial Catalog=events; User id=myuser; Password=password;"
where xxx.yyy.com is the server running SQL Server2000.
I do not get any error but the conncetion doesnot happen and my datagrid doesnot get filled.
The code for creating the connection is designer generated code.
Any clues?
-svp
I'm no guru but this one has me stumped!!
Each day there is a backup occurring of a database but nothing is scheduled either as a Job or under the database backup scheduling option.
Any suggestions greatly appreciated.
Thanks.
Hello people, I don't expect anyone to know the answer to this but I guess we'll see huh?
I'm using Microsoft SQL Server Management Studio to do all my SQL stuff, and one of the tools that comes with this is a program called Microsoft SQL Profiler 2005. Anyways, so I'm using this profiler to capture SQL processes in the background while I work with the front end.
Here is a problem I'm facing... I am looking at this table right... and I see that when I do this certain process on the front end, it inserts 3 rows into the table. So I'm thinking "I know that on the tracer, I should be looking for an insert or a Stored Procedure with and insert in it."
So I use the tracer on the front end process and it shows me all the stored procedures that happen during the process of inserting these 3 rows into this table (btw this process is doing other things besides inserting stuff into this table, but it's what i'm currently working with at the moment.)
So what I do here at my job is I take this code, tweak it to work for our front end, and wah lah.... we're good to go. So in saying that, I make my own stored procedure and I all these stored procedures that are happening.
My result......
I get only 2 row inserts into the table.... the 1st row and the last row..... the middle row isn't inserted for some mysterious reason. I tried checking all the stored procedures for unique information pertaining to that specific row insert but to no avail I couldn't.
So my question to you guys is.... is there anything I'm overlooking that could possibly be inserting that row in the table? Thanks guys!
I have two problems I need some help with.First, I've just inherited a system and am delving into a few timeoutproblems that are causing problems for the users.Now, if I do a simple select * from the table (which looks to be thecause of the problem at this stage) in QA, I get the results back inless than a second. If I open the table in EM it takes about 10. Isthere a difference in viewing the data this way ? I'm used to EM beingvirtually the same speed. There is only one row. Minor questionreally, just something I'd like to understand if there is adifference.CREATE TABLE [QUERY] ([QUERY_ID] [numeric](18, 0) IDENTITY (1, 1) NOT NULL ,[CAT_ID] [numeric](18, 0) NOT NULL ,[QUERY_DESCR] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[USER_NAME] [varchar] (40) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[USER_ID] [int] NOT NULL ,[IND_EURO] [char] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULLCONSTRAINT [DF_QUERY_IND_EURO] DEFAULT ('N'),[IND_DGCOLUMNS] [char] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL CONSTRAINT [DF_QUERY_IND_DGCOLUMNS] DEFAULT ('N'),[NO_GROUPS] [int] NOT NULL CONSTRAINT [DF_QUERY_NO_GROUPS] DEFAULT(0),[NO_FIELDS] [int] NOT NULL CONSTRAINT [DF_QUERY_NO_FIELDS] DEFAULT(0),[NO_LINES] [int] NOT NULL CONSTRAINT [DF_QUERY_NO_LINES] DEFAULT (0),CONSTRAINT [PK_QUERY] PRIMARY KEY CLUSTERED([QUERY_ID]) WITH FILLFACTOR = 90 ON [PRIMARY] ,CONSTRAINT [FK_QUERY_QUERY_CATEGORY] FOREIGN KEY([CAT_ID]) REFERENCES [QUERY_CATEGORY] ([CAT_ID]) ON DELETE CASCADE ON UPDATE CASCADE) ON [PRIMARY]GOI don't think any re-indexing has been done on this (or the othertables in the db). I was wondering if constant adding/deleting rowscould cause the index to be massive and in need of a good clear out.Any pointers would be appreciated. From what I can tell, there wassome problems trying to get replication to work. I need to dig deeperto see if this is now correct.-------------------------Secondly, there is a another table in the same database.CREATE TABLE [FIELD_DATA] ([ID] [numeric](18, 0) IDENTITY (1, 1) NOT NULL ,[DATA_ID] [numeric](18, 0) NOT NULL ,[FIELD_ID] [numeric](18, 0) NULL ,[FIELD_CODE] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[FIELD_VALUE] [numeric](15, 5) NULL ,CONSTRAINT [PK_FIELDDATA] PRIMARY KEY CLUSTERED([ID]) WITH FILLFACTOR = 90 ON [PRIMARY]) ON [PRIMARY]GOIt holds approx 4 million rows. The rest of the tables have minimaldata and about the same amount (consider them the same if you will).Now, another 'copy' of this database is held elsewhere (differentclient data) and this holds 40 million rows. The difference is thatthe first DB is 4.5GB and the second 6.5GB (approx). Does this provemy theory that re-indexing would be a good idea ?ThanksRyan
View 3 Replies View Relatedhi there,
can the SSRS works with DB mirroring?
If yes, how to do it?
I just tried to enble mirroring for reportserver and reportservertempDB, but it doesnt work after failover.
Any idea ?
Even rowchecksum is different in target from source then also update is not happening
alter Procedure SP_Archive_using_merge
AS
BEGIN
SET NOCOUNT ON
Declare @Source_RowCount int
Declare @New_RowCount int
[Code] ....
declare @old varchar(30); set @old = 'old';
Command(s) completed successfully.
select @old;
Msg 137, Level 15, State 2, Line 1
Must declare the scalar variable "@old".
Why?!
"The log file for database is full. Back up the transaction log forthe database to free up some log space."Now I only know this way to deal with that manually,Step1. in option , chance Recovery model from FULL to Simple.Step2: go to task to manually shrink the log fileStep3: Change recovery model back from simple to FULL.But by this way, I could get same problem again, the log file is fill,and need free up.Could you give an idea how to prevent this from happening? what andhow should I do???Thanks a lot in advance for your help.
View 3 Replies View RelatedHi,
Iam having 500 pages report,the report ia running for the file key ,I have reference some of the feilds to the reports header segment to display in every page,For every file key the report header feild also will change ,It is working for all file keys but the reference not occuring from body to report header when file key grouping changes to other grouping
Please let me know is there any possible way to do this one
I have configured an alert like below to track all blocked events in SQL Server across all databases and then kick start a sql job when a blocking happens which inserts data to a table, when there is a blocking in SQL server , i get an email  --which is working fine and i am able to track all queries.
but, HOW to get notifications ONLY if BLOCKING IS HAPPENING FOR MORE THAN 30 SECONDS OR 1 MINUTE with out using sp_configure?
---ALERT
USE [msdb]
GO
EXEC msdb.dbo.sp_update_alert @name=N'Blocking Process',Â
@message_id=0,Â
@severity=0,Â
@enabled=1,Â
[Code] .....
I have a SQL server 2014 environment. How to set up a mechanism which will throw a mail alert whenever we get a deadlock on the system.
View 2 Replies View Relatedhello all,
i am making a query which select the data again a particuler date.
I insert values in the table for with current date(Today's date) and the records is inserted with the date format(2006-07-14 16:12:09),now when i run the query after 2 or 3 minutes to select the records inserted today, my query returns no results.
I think it is because of the the time (14:16 in this case) that after 2 minutes, the query looks for the records inserted at (2006-07-14 18:12 or 2006-07-14 19:12) and does not get the result.
Is there a method to not consider the time(14:16) when running the query but the query fetches the records including the records inserted at this time(14:16) no matter at what time I run the query today?
Please anyone help me!
Thanks in advance!
We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
declare @error int, @rowcount int
select @rowcount = COUNT(1) FROMÂ STG_BCDR;
while @rowcount > 0
begin
 BEGIN TRAN Deletion
[code]....
Above code i try to delete records batch by batch to avoid table locking at BCDR table.total records in this BCDRÂ table is 40,000 records. Â However I run the code at execution plan, the BCDR table still clustered index scan which means that the locking still happend.
If i change the delete top (5000)...... to delete top (5).... then thre is clustered index seek, which is good..The problem here is  each time  only delete top 5 records which is means it will realy take very long time to remove those data.
how to cater the situation inorder for me to delete those huge data without table locking happend. If table locking happend , then other user will not be able to access this table at the same time.
Hi everyone,
I use the forms authetification for my report manager and server. But, i have this problem :
The Logon page running successfully but redirect to Folder.aspx not happening
To clarify:
>I get the logon page (UILogon.aspx)
>My user has been registered ok (i have checked the entry in the db to make sure it was created)
>I enter the login & password correctly and page posts back
The redirect never happens - In the browser, it never leaves the UILogon.aspx
Using Win2003, SQL Server 2005, Reporting Services
Any help greatly appreciated.
Thank you.
Shaouk.
I get this error when i try to connect with my sql,
I created my SQL with MS SQL 2005 Workgroup,
the error is:
Server Error in '/' Application.
The 'System.Web.Security.SqlMembershipProvider' requires a database schema compatible with schema version '1'. However, the current database schema is not compatible with this version. You may need to either install a compatible schema with aspnet_regsql.exe (available in the framework installation directory), or upgrade the provider to a newer version.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Configuration.Provider.ProviderException: The 'System.Web.Security.SqlMembershipProvider' requires a database schema compatible with schema version '1'. However, the current database schema is not compatible with this version. You may need to either install a compatible schema with aspnet_regsql.exe (available in the framework installation directory), or upgrade the provider to a newer version.
When i used MySql in my appliaction its working well, but now i shifted my web application on SQL Server2000 , its gives problem.
It gives this error at runtime...
The specified module could not be found.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileNotFoundException: The specified module could not be found.Source Error:
Line 79: SqlCommand OcCom=new SqlCommand(Query,OdCon);
Line 80: SqlDataReader OdDat;
Line 81: OdCon.Open();
Line 82: OdDat=OcCom.ExecuteReader(CommandBehavior.CloseConnection);
Line 83: return OdDat;
i read ths stuff from all over and reinstall the Visual studio .NET2003 again . but still some is not solved.
So Pls help Me!!!!!!!!!!!!!!
Thanx
Manish
Lets say I want to delete a record in tableA. tableA has 5 foreign key tables.
Before I delete the row in tableA, I want to make sure I dont get any foreign key violation error. I dont want to make a cascading delete, since the record should not be deleted if it has child records.
Of course I could check all those tables before the delete. Anybody know of a better approach?
Regards,
Stefan
hi
I have a question:
why when we call a stored procedure in delphi
that the return in Null (Example Not Match data with our Select)
Error occured?
Please help me .
thanks alot.bye.
Hi! i need to know which tables in my database are not used by any stored procedure in my database.i need ur help.
View 2 Replies View Related