Hi all,
When i begin a distributed transaction..., do i need to always
set xact_abort on?
But when i tried to put custom error handling to roll back a transaction with a linked server , it seems its impossible (as set xact_abort on, already automatically rolls back the transaction)
Does anyone have any ideas on this?
Thanks in advance
Benny
Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.
View 1 Replies View RelatedI have a SQL Server 2005 with a linked server to an Oracle RDB 6.0, using the Microsoft OLE DB for ODBC provider. I would like to select some rows from the Oracle RDB and then Update those specific rows afterwards. Whenever I try to do this in a transaction (BEGIN TRAN) I get an error "Driver not capable". Is there any way to do this in a single transaction?
View 1 Replies View RelatedHi All,
I am writing an interface between SQL Server and Access. I have chosen to use a linked server using the Microsoft.Jet.OLEDB.4.0 provider. One of the requirements is to have multiple SQL statements in one transaction, which is where I am encountering the problem. (see below)
BEGIN TRAN
INSERT INTO ACCES...Table
Msg 7390, Level 16, State 2, Line 2
The requested operation could not be performed because OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "HES" does not support the required transaction interface.
I am having a really really hard time finding documentation on the Microsoft.Jet.OLEDB.4.0 provider, specifically I want to know for sure if it supports the ITransactionJoin interface.
The main question is - does MS Access linked servers support transactions?
Thank you for your help,
I have exausted all resources available to me in finding out the answer.
Thanks,
Eric
We get the below error while performing a distributed transaction on linked server. We have several linked servers configured in the source server and all of them succeed with the distributed transaction except on one.
Â
We did all the basic troubleshooting and moreover the distributed transactions work fine if we use a remote server instead.
Error:
OLE DB provider "SQLNCLI10" for linked server "SERVERNAME.REDMOND.CORP.MICROSOFT.COM" returned message "No transaction is active.".
Msg 7391, Level 16, State 2, Line 3
The operation could not be performed because OLE DB provider "SQLNCLI10" for linked server "SERVERNAME.REDMOND.CORP.MICROSOFT.COM" was unable to begin a distributed transaction.
Â
 Test code:
begin distributed transaction
select top 10 * from [SERVERNAME.REDMOND.CORP.MICROSOFT.COM].master.sys.objects
 ROLLBACK
Â
Source server : Â Â
Microsoft SQL Server 2008 (RTM) - 10.0.1779.0 (X64)
      Nov 12 2008 12:10:04
      Copyright (c) 1988-2008 Microsoft Corporation
      Enterprise Edition (64-bit) on Windows NT 6.0 <X64> (Build 6001: Service Pack 1) (VM)
Â
Target server : Â Â
Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (Intel X86)
      Jul 9 2008 14:43:34
      Copyright (c) 1988-2008 Microsoft Corporation
      Enterprise Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2)
We have created linked server between SQL Server 2000 and Oracle 10g in offshore environment as well as onsite environment,both the environments are almost IDENTICAL.Basically, the whole execution happens on Oracle and the output is passed to SQL Server.When the below query is executed in offshore environment it is returning values perfectly.
SELECT * FROM OPENQUERY(ORACLE_LINK,'{Call TEST.IVR.lo_Dlr_GetInfo(55,{resultset 2,p_ReturnVal})}')
Here: ORACLE_LINK - is the Linked Server Name,
TEST - Oracle Schema Name
IVR - Oracle Package Name
But when the same query is executed on onsite environment it is raising the following error.
Server: Msg 7321, Level 16, State 2, Line 1
An error occurred while preparing a query for execution against OLE DB provider 'MSDAORA'.
OLE DB error trace [OLE/DB Provider 'MSDAORA' ICommandPrepare::Prepare returned 0x80040e14].
The environment details are:
Offshore Environment(Successfully returning values):
1)Operating System - Windows 2000 Advanced Server
2)Service pack on Operating System - SP4
3)Version on MSDORA.dll(C:ProgramFilesCommonFilesSystemOLED B) - 2.81.1117.0
4)Version on tstbestsql1---SQL Database - SQL Server 2000 Enterprise Edition
5)ServicePack on tstbestsql1---SQL Database - 8.00.2040 (SP3a)
Onsite Environment:
1)Operating System - Windows 2000 Advanced Server
2)Service pack on Operating System - SP4
3)Version on MSDORA.dll(C:ProgramFilesCommonFilesSystemOLED B) - 2.81.1117.0
4)Version on tstbestsql1---SQL Database - SQL Server 2000 Enterprise Edition
5)ServicePack on tstbestsql1---SQL Database - 8.00.2040 (SP4)
We are able to execute if we are executing the query as
SELECT * FROM OPENQUERY(ORACLE_LINK,'select column1 from table1') on the Onshore server and it is perfectly returning the value.I believe the problem might be with "Call" if anyone can help with it that will be great.
Thanks,
Raahul
Gurus,
I cant find any odbc provider from my linked server.(SQL 2005)
I am using MDAC 2.8 SP1 ON WINDOWS XP SP2 on my machine.
What can i do to get odbc provider..?
Please help me to do this
Thanks
Krishna
I have an SSIS job that is pumping to a SQL Server Destination, hundreds of gigabytes of raw text files. Today I received this strange error - does anyone have insight? Also, how would I make the data tasks more stable and robust so that this doesn't cause package failure (retries, or something?)
[SQL Server Destination [4076]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
Hi all,
I am using MSSQL2005 and created a linked server with Ole DB provider for ORacle to connect to Oracle.
sp_tables_ex linked_server
It shows the tables in oracle, however, it show error with selecting the oracle tables via the linked server,
Server: Msg 7399, Level 16, State 1, Line 1 OLE DB provider 'MSDAORA'
reported an error.
[OLE/DB provider returned message: Unspecified error] [OLE/DB provider returned message: ORA-03113: end-of-file on communication channel ] OLE DB error trace [OLE/DB Provider 'MSDAORA' IDBSchemaRowset::GetRowset
returned 0x80004005: ].
Any Idea? Thanks a advance.
Hello all,
I want to create a table in MS-Access. So I have written the following query.
Code Snippet
select * from Openquery(KKACC, 'select * Into Temp from Table select 1 as col1')
But I am getting the following error.
Code Snippet
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "KKACC" returned message "Syntax error in FROM clause.".
Msg 7321, Level 16, State 2, Line 1
An error occurred while preparing the query "select * Into Temp from Table select 1 as col1" for execution against OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "KKACC".
How can I resolve this error. Does any one have any work arround for this..?
Thanks
-- Krishna
System: Win 2003, SQL Server 2005, Using an AD win account that is not a member of the Admin group on the server.
Error message from Management Studio query window:
Msg 7302, Level 16, State 1, Line 1
Cannot create an instance of OLE DB provider "IBMDADB2" for linked server "Sname".
Event messages associated with this error:
App Event ID: 19036
The OLE DB initialization service failed to load. Reinstall Microsoft Data Access Components. If the problem persists, contact product support for the OLEDB provider.
Sys Event ID: 10016
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {2206CDB0-19C1-11D1-89E0-00C04FD7A829}
to the user domainuser SID (S-1-5-21-126051702-1034962659-2130403006-7826). This security permission can be modified using the Component Services administrative tool.
I€™m getting this error message when trying to run an openquery statement through a linked server to DB2. (SELECT * FROM OPENQUERY(Sname, 'SELECT * FROM tablename€™))
The linked server has a remote login and password that it uses to connect to DB2.
I found this from another post on how to fix this error:
Expand Component Services - Computers - My Computer - DCOM Config Select MSDAINITIALIZE Right Click properties then security
Under Security - Launch Permission: enable Local Launch and Local Activation for your SQL Service account
Under Security - Access permissions: Allow System: Local Access and Remote Access.
After completing these steps I still get the error message but the events are no longer generated. I€™ve also tried different variations of these steps. The only way I can get this to work is to either make the AD user a member of the Admin group on the server or by putting in a user account that has admin rights to the server in the MSDAINITIALIZE properties €“ Identity Tab €“ Run this App as this User.
Can someone please tell me the steps that I€™m missing?
We have a SQL2005 server install running on a Win2003 Server. It has a linked server to iHistorian using the iHOLEDB provider for iHistorian. Randomly and after a few execution to this provider, we start getting errors
Msg 7303, Level 16, State 1, Line 2
Cannot initialize the data source object of OLE DB provider "IhOLEDB.iHistorian" for linked server "fspheafhs1".I created a data source in VS2005 for BI on the SQL server using the iholedb provider. This was successful. However, all queries or OPENQUERY statements to the linked server fail. This seems to continue until SQL Server is restarted. Does anyone know how to reset a provider in SQL Server or tell if the SQL Server is having trouble with the provider? There are no message in the SQL Error Log. Again the provider continues to work outside of SQL Server, but no longer can be accessed from within SQL Server. Thanks in advance.
Hi
i am try to execute a command " SELECT * FROM [SQLSERVER].[DATABASENAME].[DBO].[TABLE] ".. but i am receiving a error message
Msg 7319, Level 16, State 1, Line 19
The OLE DB provider "SQLNCLI" for linked server "SQLSERVER" returned a "NON-CLUSTERED and NOT INTEGRATED" index "MSmerge_index_1348915877" with the incorrect bookmark ordinal 0.
but when i try to check the linked server it's shows me the linked is okay.. The following command i use to check wethare the link is fine or not..
CREATE TABLE #foo
(
pingResult SYSNAME NULL
);
INSERT #foo
EXEC master..xp_cmdshell
'ping SQLSERVER;
IF EXISTS
(
SELECT 1
FROM #foo
WHERE pingResult LIKE '%TTL%'
)
BEGIN
PRINT 'Feel free to use linked server.';
END
ELSE
BEGIN
PRINT 'Linked server not available.';
END
DROP TABLE #foo;
and Following result i receive..
(13 row(s) affected)
Feel free to use linked server.
Can any One tells me where i m making mistake or how can i resolve this problem
Hallo
i'm trying to connect a VFP DBC as a linked server on MSSQL2000sp3a, using following parameters:
Product name: VFP
Data source: \networkpath odbc
Provider: VFPOLEDB.1
No security context
I'm trying the same operation both from a W2000sp4 server (+ MDAC 2.8sp1 ?) and a WXPPsp2, against two identical copies of the DBC that resides on two different path (one on the final path and one on a test path).
From WXPPsp2 everything runs ok, from W2000 i'm always getting this error:
Error 7399: OLE/DB Provider 'VFPOLEDB' IUnknown::QueryINterface returned 0x80070005: Access Denied
(already reported in this thread, http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1832362&SiteID=1 but it didn't helped me)
The error happens independently from the user the query runs under (basicly AD account, both domain admin and normal user).
MSSQL runs under a domain account which have full permissions (for test purpose) on the directories where DBC reside.
I did no further modifications on the WXP machine in order to have the linked server running, simply it ran smoothly from the beginning.
Clearly the difference rely on the different OS... but what else?
i ran component checker to determine the MDAC version but some components version numbers slightly differs from the expected ones (eg. resulting version is 2.0.1064 versus 2.0.1022 expected in MDAC 2.8) so i suppose to have MDAC2.8 sp1 on the server.
thanks in advance
Hello, everyone!
I'm currently having an issue with a linked server. Here's the surrounding information:
A) I have a clustered SQL Server 2005 Instance (A) and a SQL Server 2000 instance (B).
B) There is a linked server on A to B. When I set it up, I did run the fix to ensure A could talk to B (There was an issue with communication between 2005 and 2000 servers). It has been there since I installed A, and has worked fine.. Until last week.
C) This linked server uses static credentials to connect to B.
D) Named Pipes are enabled on both servers to listen to both connections on both A and B in cliconfg. So A has a named pipe listening for B, and B has a named pipe listening for A.
E) A has a view that looks at a table on B - It's a table view, very simple, just pulls in all the data from the table on B.
So, I go to do a select statement from the view, connected as a user other then 'sa'. I then get the error:
Named Pipes Provider: Could not open a connection to SQL Server Linked Server
Error Source: ncli Client (Paraphrasing, didn't copy that down, but it was the ODBC connector)
Well, that's odd. It's been working fine for months now..
I then go and connect as sa on A to query B. It works! Mind you, absolutely NO QUERY from A to B will run again until I run SOME kind of query has been run as sa on A.
Mind you, this is not a credential issue. Every user who connects to the linked server to B uses a stored credential that is DBO to the database on B. The same User Name and Password exists on both A and B.
Also of note, I check the activity monitor. There's a process that is "dormant" every time I run a query against the view. The details of this connection are:
sp_reset_connection;1
My question is, why is it resetting the connection on B when being queried from A? Why is it "all of a sudden" a problem? Are there any changes that coudl ahve been made that would cause this?
Any help with this confusing issue would be appreciated.
Thanks!
I have an SSIS job that is pumping to a SQL Server Destination, hundreds of gigabytes of raw text files. Today I received this strange error ? Also, how would I make the data tasks more stable and robust so that this doesn't cause package failure (retries, or something?)
[SQL Server Destination [4076]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
Ok here is a run down of the situation:
I'm running Server 'A' and Server 'B' which are both on SQL 2005 SP2. Server B connects to Server A using the linked server functionality via the SQLNCLI provider. I am issuing an update statement from a web api in a nested transaction that uses a distrubted transaction.
However, I am receiving the following error :
Unable to start a nested transaction for OLE DB provider "SQLNCLI" for linked server "A". A nested transaction was required because the XACT_ABORT option was set to OFF.
OLE DB provider "SQLNCLI" for linked server "A" returned message "Cannot start more transactions on this session.".
I've researched the issue and understand how XACT_ABORT works.
Also, I looked at the Linked Server provider options for SQLNCLI and came accross the Nested Queries option being unchecked. I checked the option and applied it to the Linked Server.
Okay, so after my long post my questions are: Do i need to restart SQL in order for this to take effect? If not, what do i need to do? I 've restarted IIS to no avail .
I keep recieving a "Invalid use of schema or catalog for OLE DB provider "MSDAORA" for linked server D"CUSTOMERLINK". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema."
I'm attempting to set up a linked server from SQL 2005 to Oracle 10.2. I run the following sp_addlinkedserver and sp_addlinkedsrvlogin procedures:
sp_addlinkedserver
@server = 'CUSTOMERLINK',
@provider = 'MSDAORA',
@srvproduct = 'ORACLE',
@datasrc = 'CUSTOMER'
GO
sp_addlinkedsrvlogin
@rmtsrvname = 'CUSTOMERLINK',
@useself = 'False',
@rmtuser = 'CUSTOMER1',
@rmtpassword = 'PASSWORD!'
These procedures complete successfully. I then run a sp_tables_ex procedure:
sp_tables_ex @table_server=CUSTOMERLINK, @table_schema='CUSTOMER1'
This procedure completes successfully and gives me all of the table names in my oracle database that relate to the Customer1 schema.
Then when I go to run a query
select id from [CUSTOMERLINK].[CUSTOMERDB].[CUSTOMER1].[CLIENT] Where name = 'codm'
I recieve a "Invalid use of schema or catalog for OLE DB provider "MSDAORA" for linked server D"CUSTOMERLINK". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema." error.
Any suggestions?
Hi,
I'm working on an OLE DB provider. This provider is supposed to retrieve data from managed application running in background. The data retrieval is handled by C# component communicating with source application via remoting, the data are then exposed via component's COM interface. OLE DB provider itself instantiates the communication component.
Now, the problem: this worked ok in SQL server 2000, but it doesn't seem to work in SQL server express edition. Concretely, the communication component fails to get created (CoCreateInstance ends with 'class not registered') and SQL server logs this:
2007-08-24 14:48:49.42 spid51 Error: 6511, Severity: 16, State: 20.
2007-08-24 14:48:49.42 spid51 Failed to initialize the Common Language Runtime (CLR) v2.0.50727 with HRESULT 0x80131022. You may fix the problem and try again later.
I've googled a bit and found out someone else getting this message, and he was told something like 'trying to load CLR in some cases is disabled in newer (>2000) versions of SQL server'.
Now, I have very little knowledge of SQL server, CLR integration etc., so I'm not sure whether this applies to my case as well, but I think so - that problematic COM object is C#-based.
I'd be glad for any hints, ideas how to solve this issue, I just need the OLE DB provider to be able to access that managed application.
Thanks,L.
I'm trying to define a linked server using Microsoft OLE DB Provider for Data Mining Services. MSDMine data provider is missing. Do you know where I can get this? Thanks in advance.
I'm have a Xeon 64bit proc. using SP2. And had installed:
SQLServer2005_ADOMD_x64.msi, SLQServer2005_ASOLEDB9_x64.msi,SQLServer2005_OLAPDM_x64.msi, and SQLServer2005_XMO_x64.msi.
I find this most perplexing.
I have two servers, DEV and PROD. Now my DEV server works just great, I can connect to the linked server, query, etc... all is well.
So I'm setting up my PROD server and when I go to add the linked server I get:
Cannot initialize the data source object of OLE DB provider "SQLNCLI".... and Unable to complete login process due to delay in opening server connection.
Now I am running SQL Server 2005 and connecting to an SQL 2000 server.
The odd part is that this works just fine on DEV.
When I go to create the linked server I set:
Linked Server: "LinkedServerName"
Server Type: "SQL Server"
and that's it.
I go to Security and enter my DOMAINUSER.ACCOUNT and then enter the login creds for the linked server.
When I click "OK" I get the above mentioned error code.
Any thoughts?
Hi,
I have been trying to export data from a Microsoft Excel 2007, Tester.xlsx to a SQL Server 2005 table as :
SELECT * INTO CUSTMAS FROM OPENDATASOURCE('Microsoft.Jet.OLEDB.4.0',
'Data Source=C:Tester.xls;Extended Properties=Excel 8.0')...[Providers$]
I have an error:
Cannot get the column information from OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server"(null)"
I wanna to create a linked server which connect to oracle. Â Here are my steps:
1.Install Oracel drivers Oracle Data Access Components.
2.Configure the Oracle Ole DB provider to run inside the SQL Server process and configure it to accept parameters. exec
master.dbo.sp_MSset_oledb_prop
'ORAOLEDB.Oracle',
N'AllowInProcess', 1
exec master.dbo.sp_MSset_oledb_prop
'ORAOLEDB.Oracle',
N'DynamicParameters', 1Â
3.Create linked server with scripts:
exec sp_addlinkedserver N'MyOracle1', 'Oracle', 'ORAOLEDB.Oracle', N'//10.154.14.235', N'FetchSize=2000', ''
exec sp_addlinkedsrvlogin @rmtsrvname='MyOracle', @useself=N'FALSE', @rmtuser=N'root', @rmtpassword='Sqlexp!23' Â Â
4. After create successful and testing the connection ,I got the error below.(My windows firewall is turn off)
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Cannot initialize the data source object of OLE DB provider "ORAOLEDB.Oracle" for linked server "MyOracle".OLE DB provider "ORAOLEDB.Oracle" for linked server "MyOracle" returned message "ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA". (Microsoft SQL Server, Error: 7303)
I just installed a SQL Server 2005 Express SP2 instance on a server with an existing SQL Server 2000 SP3 installation. (I need SQL Server 2005's INSERT from an EXEC capability). It's working great now except for one thing: I can't link any other SQL servers! I've already successfully added and queried a linked Oracle server, but attempting to add a linked SQL server gives me the following error, no matter which SQL provider I try to use:
Code Snippet
"The linked server has been created but failed a connection test. Do you want to keep the linked server?"
Additional information:
--> An exception occured while executing a Transact-SQL statement or batch (Microsoft.SqlServer.Express.ConnectionInfo)
--> Cannot create an instance of OLE DB provider "SQLNCLI" for linked server "SERVERNAME". (Microsoft SQL Server, Error: 7302)
The technical details reveal the error source as "sp_testlinkedserver".
I've scoured the net and premier support for advice on this problem, but the little I found wasn't helpful. I've tried reinstalling the SQL Native Client, but it didn't help. I've tried uninstalling SQL Server 2005 Express completely (including management studio and native client), rebooting, and reinstalling everything, with no luck. The server (obviously) does not have a firewall enabled. I've tried stopping the SQL 2000 Server installed on the system, no help. If I create a test .UDL file on the system, pointing to any of the SQL servers I'm trying to link, clicking the "Test Connection" button returns successful. I'm also able to connect to and query the servers directly from the SQL 2005 Express Management Studio. I just can't add them as linked servers.
The server is running Windows 2003 SP1, SQL Server 2000 SP3, and SQL Server 2005 Express SP2 (the default "SQLExpress" named instance). I've tried setting up SQL 2005 Express to run under the network service account and under a domain account used by the other SQL 2000 servers.
From other SQL 2000 servers, I can connect and link to the SQL Server 2005 Express instance successfully. I can also successfully add linked SQL servers in SQL Server 2000 instance installed on the same server. Only adding linked SQL servers in 2005 Express seems to be broken.
Anyone have any other suggestions? I'm totally baffled. Thank you so much for any helpful advice.
Hi All,
I have a strange problem with one of my Linked server connections. I am connecting from
SQL Server 2005 Standard Edition (9.00.3042.00) to and Oracle 10g database using the Microsoft OLE DB Provider for Oracle. The connection works and I am able to select from all the Oracle tables except for 1 table. When selecting from this table I get the following error:
OLE DB provider "MSDAORA" for linked server "DBNAME" returned message "ORA-01476: divisor is equal to zero".
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "MSDAORA" for linked server "DBNAME".
This probem happens if the table has rows or has no rows (empty table).
I have tried SELECT * and count(*) along with selecting a specific column from the table.
I can use SQL*plus from the system that the SQL database server running on it and select from the table using the same login/password that the linked server uses to rule out a permissions problem.
Any suggestions on what I can try next?
Thanks.
Hi,
I was making a linked server connection between 2 SQL Server 2000 servers (both running on Windows 2003 Server), and I was creating an insert trigger in one of the SQL Server table to insert the same value to the other SQL table. But when I try to make an insert to the table, the following error occurred :
Server: Msg 7391, Level 16, State 1, Procedure <triggername>, Line xx
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
I tried to change the trigger into a SELECT statement only and the error still occurred. But when I tried to insert a row directly to the linked server via Query Analyzer, it succeeded.
I have read KB 280106, KB 306212, and KB 329332, and I've tried SET XACT_ABORT ON statement, but none of them can solve the problem.
If there's anyone who has idea on what's wrong or has a suggestion what I should try please help.
Thank you in advance.
This is a problem that never get solved, sometime I can use other way to avoid it, but havn't found a solution yet, i hope I can get some more idea here.
I am using SQL 2005, when I run
select * into #import1
from OpenRowSet('microsoft.jet.oledb.4.0','Excel 8.0;hdr=yes;database=\ws8webjeff2.xls',
'select * from [jeff2$]')
I get
Cannot initialize the data source object of OLE DB provider "microsoft.jet.oledb.4.0" for linked server "(null)".
when I try to compile a SP with that statement in it, I get the same error, like
create stored procedure test
as begin
select * into #import1
from OpenRowSet('microsoft.jet.oledb.4.0','Excel 8.0;hdr=yes;database=\ws8webjeff2.xls',
'select * from [jeff2$]')
end
so it seems the error may not relate to the real file, since at the compile stage, it should not check the real file?
On my live db, after I restart the SQL service, the statement will work, after a while, one or several days, I get the same error again. I can not restart my live db quite often for sure, so now I have another backup db server, I need run the statement on the backup server and then read the data from there.
I have the same problem at two places, both use SQL 2005.
So far there are three questions
1, why it works after restart, but only last for a while? something about memory? since the backup db seldom need restart and work fine after many days.
2, why it gives error in compile stage?
3, why two dbs in different Enviroment has the same problem
The most answer I have gathered so far is permission issue, true I got similar error if the import file is located in a place which SQL has no right to access. But in this case, it should not be.
Any other idea or suggestion?
thanks
Window Server 2003 R2 Standard Edition (x64) SP1
Sql Server 2000 8.00.2039 SP4 Enterprise Edition (32 bit version)
A linked server is configured to a sql 2000 server and when I execute sql statement SELECT * FROM [LinkedServer].[Database].[dbo].[TableName] it gives following error message: -
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IUnknown::QueryInterface returned 0x80004005: The provider did not give any information about the error.].
In case if anyone has a solution to it, please let me know.
Good Morning
Has anyone successfully used cherry's oledb provider for MYSQL to create a linked server from MS SQLserver 2005 to a Linux red hat platform running MYSQL.
I can not get it to work.
I've created a UDL which tests fine. it looks like this
[oledb]
; Everything after this line is an OLE DB initstring
Provider=OleMySql.MySqlSource.1;Persist Security Info=False;User ID=testuser;
Data Source=databridge;Location="";Mode=Read;Trace="""""""""""""""""""""""""""""";
Initial Catalog=riverford_rhdx_20060822
Can any on help me convert this to corrrect syntax for sql stored procedure
sp_addlinkedserver
I've tried this below but it does not work I just get an error saying it can not create an instance of OleMySql.MySqlSource.
I used SQL server management studio to create the linked server then just scripted this out below.
I seem to be missing the user ID, but don't know where to put it in.
EXEC master.dbo.sp_addlinkedserver @server = N'DATABRIDGE_OLEDB', @srvproduct=N'mysql', @provider=N'OleMySql.MySqlSource', @datasrc=N'databridge', @catalog=N'riverford_rhdx_20060822'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'collation compatible', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'data access', @optvalue=N'true'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'dist', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'pub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'rpc', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'rpc out', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'sub', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'connect timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'collation name', @optvalue=null
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'lazy schema validation', @optvalue=N'false'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'query timeout', @optvalue=N'0'
GO
EXEC master.dbo.sp_serveroption @server=N'DATABRIDGE_OLEDB', @optname=N'use remote collation', @optvalue=N'false'
Many Thanks
David Hills
Hi--
I am running SQL Server 2005 on Win2k3:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 6.0.3790.1830
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790
I have the OraOLEDB.Oracle provider installed to the (C:oraclexe) directory.
I am having problems querying from linked oracle server. When i setup oracle as a linked server and purposely enter an incorrect password the query i run tells me i have an incorrect password. So it at least knows that. when i set the correct password and run a query I get this error:
(i replaced the real server name with "someServer".)
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer".
This is how I set up my Linked server:
Provider: "Oracle Provider for OLE DB"
Product Name: SomeServer
Data Source: SomeServer
Provider String: "Provider=OraOLEDB.Oracle;Data Source=SomeServer;User Id=MyLogin;Password=MyPassword"
The query I run is:
Select * from [Someserver].[schema or database]..[tbl_name]
Any help??? What am i missing?
Hi I always get good reply from u all, thank you,
I have copied my asp.net website from one server to another. they administrator made necessary modification on IIS manager . and able to see the website on browser. but now i can't loging to system using old password.
I tryed to create new password then also it gives error
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here I have used asp.net login control and membership class. Do I need to make nay changes in code.
I have already modified server name in connection string in web config file.
any one can say what is the problem and how to solve this.
thanks
Pat
Hi ,
I am struck with one issue.Plz help me out if you have any solution for this one.
Details
Front End - Visual Studio 2005
Back End -SQL Server 2000 (Remote database)
Error i am getting is
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I am using SQL Server 2005 and trying to create a linked server on Oracle 10. I used the commands below:
EXEC sp_addlinkedserver
@server = 'test1',
@srvproduct = 'Oracle',
@provider = 'MSDAORA',
@datasrc = 'testsource'
exec sp_addlinkedsrvlogin
@rmtsrvname = 'test1',
@useself = 'false',
@rmtuser='sp',
@rmtpassword='sp'
When I execute
select * from test1...COUNTRY
I get the error. "The OLE DB provider "MSDAORA" for linked server "...." does not contain the table "COUNTRY". The table either does not exist or the current user does not have permissions on that table."
The 'sp' user I am connecting is the owner of the table. What could be the problem ?
Thanks a lot.