Don't Repeat The Same Fruilt A User Ate...
Sep 27, 2007
This may get brought up again and again, but I don't know how to deal with it by heart yet... in fact I mean to say, I don't know how to deal with it.
With the given data set how do you only return one of the 2 rows where a given user ate the same fruit?
apples greg
peach greg
lemon greg
apples greg
peach bruce
peach bruce
lemon bruce
apples bruce
pear paul
peach paul
plumb paul
plumb paul
apples barb
peach barb
lemon barb
pear barb
What T-SQL is needed to produce the following dataset?
apples greg
peach greg
lemon greg
peach bruce
lemon bruce
apples bruce
pear paul
peach paul
plumb paul
apples barb
peach barb
lemon barb
pear barb
View 2 Replies
ADVERTISEMENT
Sep 1, 2002
Hi all,
I'm new to SQL Server 2000. There are certain record that always return a repeated data in a colomn.
I'm using a very simple sql command. Just select.
In quetry analyser it always return a repeated data.
Thanks for help
View 2 Replies
View Related
Jun 22, 2006
Hi all
I am new in the forum and in SQL
I have this code
Code:
SELECT
PersPlac.Name,
Zoom1.Descr,
Client.PersonID,
Client.Name AS CLIENT_NAME,ClientCu.Period,ClientCu.YearID,IVPeriod.PrdDescr,(ClientCu.DebitP/((InvVAT.VATVal+100)/100)),InvVAT.VATVal
FROM Client
RIGHT JOIN Salesman WITH (READUNCOMMITTED)
ON (Client.SalesmanAA = Salesman.AA)
LEFT JOIN PersPlac WITH (READUNCOMMITTED)
ON (Client.Place = PersPlac.Code)
LEFT JOIN Zoom1 WITH (READUNCOMMITTED)
ON (Client.Zoom1 = Zoom1.ID)
LEFT JOIN CLIENTCU WITH (READUNCOMMITTED)
ON (CLIENT.PERSONID=CLIENTCU.PERSONID)
RIGHT JOIN InvVAT WITH (READUNCOMMITTED)
ON (CLIENT.TAXCAT=InvVAT.TAXCAT)
RIGHT JOIN IVPeriod WITH (READUNCOMMITTED)
ON (ClientCu.Period = IVPeriod.PeriodID)
WHERE Salesman.Name='ΚΟΡΜΠΟΣ ΦΩΤΙΟΣ'
AND ClientCu.Period<>0
AND PersPlac.Name<>'Εικονική Γεωγρ. Περιοχή'
AND Client.Name='ΦΩΤΕΙΝΙΑ ΑΝΝΑ'
and InvVAT.VATVal in (13,19)
the code run fine but every line is turn back 4 times.
Why?
Thanks for the help
View 2 Replies
View Related
Jun 26, 2007
After finally overcoming a number of hurdles with LisaNicholls help, I've got one hurdle left that I can't seem to get around. A system I'm updating currently outputs attendance registers in HTML which is built using some complex ASP.NET code. To make this more manageable, I decided to try and handle this output in Reporting Services.
Whilst the output looks fairly inocious and simple, in theory it's been a nightmare to implement. Because it's inteded for print output, my intention was to output the report straight to PDF, however I'm encountering an issue trying to get some of the data to "repeat" on each of the PDF pages.
If you look at the following image; http://mparter.pwp.blueyonder.co.uk/images/register_page.png, you'll see 4 main areas.
The problem areas are the red, green and blue ones.
The unmarked bottom section is a matrix which pages fine on PDF.
The TEXBOXES in the red area can possibly be worked-around by using report parameters.
The TABLES in the blue and green areas are the main problem. I can't include them in a report header workaround because there could be multiple rows per table
So, back to my question, how do I get the three marked coloured areas to repeat on each "page" of the PDF?
View 3 Replies
View Related
Nov 14, 2007
Hi all,
I am designing a mailing label report. I put the client info. on a sub-report.
I want to use a parameter to input the label amount and sub-report will be repeated by that amount.
How can I implement this?
TIA
Micror
View 4 Replies
View Related
Oct 21, 2006
hi guys,
In reporting services i have a table and below which i have a chart. The table has lot of values so the report spans multiple pages. I have set page breaks such that the table displays only 10 records. After all the values have been displayed in the last page the chart is displayed. I want the chart to display in each and every page of the report. It is the same chart that i want to display. How do i do this?
plz can anyone give me ideas.
Thanks,
Sai Abhiram Bandhakavi
View 3 Replies
View Related
Apr 14, 2001
Instead of explaining my question here I've made a seperate
html page with a full explanation of my problem with pictures
and examples.
I've posted the question to this URL
http://miona.com/listmenus/
View 1 Replies
View Related
Jan 23, 2015
I am working on a scenario where I would need to repeat the same row for previous MonthIDs, here's the example (snapshot attached):
CustomerIDMonthIDRSCIDFlag1Flag2Flag3
1232943456000
1233001234011
1233033542010
1233032345111
1233043542010
1233042345111
1233053542010
1233052345111
1233062345111
1233063542010
1233072345111
1233073542010
1233083542010
1233093542010
1.For MonthIDs 309 & 307, I would need to add same combinations to 4 prior months (for 309, I would need the 309 row as 308, 307, 306, 305 and for 307, I would need to add 306, 305, 304, 303).
2.From the snapshot, Green rows are added for 309 MonthID and Orange rows are added for 307.
3.While we are adding 309 row to prior to 4 months, if any prior month has different combination than 309, that same combination need to be repeated for prior months.
I was using the below code to achieve the same:
declare @SC_j as int = 0;
declare @SC_k as int = 4;
while @SC_j <= 4
begin
insert into #Test
select distinct dt.CustomerID
[code]....
But my code starts from 1st MonthID however I would want this to be starting from last MonthID which I am not able to achieve.
View 9 Replies
View Related
Jun 27, 2006
Hello, I€™m creating a cube with Analysis services 2000 and SQLServer 2000 that has the following structure:
The fact table has a primary key and some measures:
Fact_Table
PKFact (the primary key)
Measure 1
Measure 2
And I have some dimensions, but I€™ll put here the one of interest, this dimension has a foreign key to the fact_table, this is because it is really a €śdetail€? of the fact table, the interesting thing here is that this dimension not only has a foreign key to the fact_table, but also is a parent-child dimension:
Dimension_Table
FKFact (the foreign key to the €śPKFact€? field of the fact table)
PKId (The id of the field for the parent-child relationship)
FKParentId (the foreign key to this same table, this is, the parent of the field)
TheLevel (the data€¦)
So, if I create the cube without the Dimension_Table (of course, I have more dimensions), the cube shows the data correctly, but when I include this dimension, the data of the fact_table starts to be repeated once for each row in the dimension table (once for each row that has the relation PKFact €“ FKFact of course), Somebody knows how I can avoid this data being repeated? I€™ve tried a lot of things but none works.. Please help!!
Thanks in advance.
Odin_Dark@yahoo.com.mx
View 1 Replies
View Related
Feb 19, 2007
Hi,
In RS 2005 i am using a table to show the multiple records.Now i want to repeat the header of the table for each record of table but dont know how to do this.the layout should like..
Name Address
Mach xyz
Name Address
Peter abc
Also how can i make our report multilingual.
Pls suggest me.
thanks in advance..
View 4 Replies
View Related
Apr 16, 2008
Hi
I added a table and chart in the body of my report (.rdl)
If the report spans multiple pages , the chart is visible only on first page.
I need to see the chart on all pages.
Please suggest
View 4 Replies
View Related
May 5, 2008
Hi Everyone. How could I configure data region ( table, matrix ) to be repeated on each report's page?
View 8 Replies
View Related
Nov 15, 2005
Dear Anyone,
View 7 Replies
View Related
Feb 13, 2008
I have a table. In that table I have a list by student number that lists the entry dates into a particular grade. When trying to list only the first time entered, there is no unique way to identify one row from another other than the date. Is there a way to use max or min to only pull one date per student number? I have done a series of case when statements and I am able to get it down to 1 to 2 entries per student number, but I need to get it down to only 1 date per student number.
Thank you for your help
SELECT DISTINCT mx.stu_num,
CASE WHEN er.STU_NUM = ep.STU_NUM
THEN er.enterdater
ELSE CASE WHEN ea.STU_NUM = ep.STU_NUM
THEN ea.enterdatea
ELSE CASE WHEN eb.STU_NUM = ep.STU_NUM
THEN ep.enterdatep
ELSE eb.enterdateb
END
END
END AS entrydate
FROM dbo.mx AS mx LEFT OUTER JOIN
dbo.v_EntryDate9_R AS er ON mx.stu_num = er.stu_num LEFT OUTER JOIN
dbo.v_EntryDate9_P AS ep ON mx.stu_num = ep.stu_num LEFT OUTER JOIN
dbo.v_EntryDate9_A AS ea ON mx.stu_num = ea.stu_num LEFT OUTER JOIN
dbo.v_EntryDate9_B AS eb ON mx.stu_num = eb.stu_num
View 1 Replies
View Related
Jun 18, 2007
hi there,
i've made a report containing a subreport. the subreport is in a table. the table headers should repeat. but if the subreport expands more than one site, the table header doesnt repeat.
okay. i could place the table header in report header, but in report header i cant use fields from a dateset.
thanks for any idea, tobi
View 1 Replies
View Related
Jul 11, 2006
Right now I have a web page that when you click on the only button on the page it opens a text file, reads a line from the text file, splits the comma separated line and stores it in to an array 'strData' and then moves on to the next line and repeats this process.What I want to do before it goes to the next line is insert that strData in to a SQL DB.This is my InsertCommand for my SqlDataSource1:InsertCommand="INSERT INTO [Numbers] ([WTN], [DSL_Qualified], [DSL_Qualified_Date], [Equip_1MM], [Line_Trouble], [Sync_Rate], [Res_Bus], [Host_Remote]) VALUES (@WTN, @DSL_Qualified, @DSL_Qualified_Date, @Equip_1MM, @Line_Trouble, @Sync_Rate, @Res_Bus, @Host_Remote)"Plus the <InsertParameters>:<InsertParameters> <asp:Parameter Name="WTN" Type="Int32" /> <asp:Parameter Name="DSL_Qualified" Type="String" /> <asp:Parameter Name="DSL_Qualified_Date" Type="DateTime" /> <asp:Parameter Name="Equip_1MM" Type="String" /> <asp:Parameter Name="Line_Trouble" Type="String" /> <asp:Parameter Name="Sync_Rate" Type="String" /> <asp:Parameter Name="Res_Bus" Type="String" /> <asp:Parameter Name="Host_Remote" Type="String" /> </InsertParameters>So I'm not sure exactly what to do after this:while (file.Peek() > -1) { string strCSVData = file.ReadLine(); string [] strData = strCSVData.Split(','); // somehow get strData in to the SqlDataSource1.Insert method?? }Any help would be appreciated.Thanks.
View 1 Replies
View Related
Feb 25, 2013
When I run a report for a purchase order, the report duplicates records for product codes.For example the purchase order is: P000976, the report display the product code twice when it should only appear once. 45-5540 appears twice.
P000976 09-17-2012 15,040.00 15,040.00 0.00
45-5540 "Lordotic Cervical Spacer 10mm
Lordotic Cervical Spacer 10mm" 20 20 0
45-5540 "Lordotic Cervical Spacer 10mm
Lordotic Cervical Spacer 10mm" 20 20 0
When I put the report's SQL in SQL server and run the sql by seeing where the code cause the additional product code it is this line within the SQL:
join all_product_codes_VW p on q.distpartno = p.distpartno
select q.specialrequirement
, q.distpartno
, q.toproduce
, q.prodbegindate
, q.distributor
[code]....
View 1 Replies
View Related
Mar 6, 2014
I have two columns which needs to repeat based on ID and number of distinct rows in that ID.
ID Date Created
1 1/1/2012 Sudheer
1 1/2/2013 Sudheer
1 3/3/2013 Sudheer
2 1/2/2014 Veera
2 2/5/2015 Veera
Results
ID Date Created Date Created Date Created
1 1/1/2012 Sudh 1/2/2013 Sudh 3/3/2013 Sudh
2 1/2/2014 Veera 2/5/2015 Veera
View 3 Replies
View Related
Aug 10, 2014
I have SQL query/dual sub-query in MS Access that is returning data from the left side of the query FROM correctly, but is only returning one record from the right side of the query FROM. Furthermore, it repeats the display of the one record and it repeats the entire results set with a different one record each time until all the records have been displayed. I expect that problems described as “Furthermore” will not exist by fixing the one record issue. I have tried using all the join types available in MS Access, but none change the result.
The desired output is:
Yellow Blue
11/23/201311/19/2013
11/19/210310/01/2012
10/01/210210/08/2010
10/08/201012/14/2007
The actual output is:
Yellow Blue
11/23/201311/19/2013
11/19/210311/19/2013
10/01/210211/19/2013
10/08/201011/19/2013
11/23/201310/01/2102
11/19/210310/01/2102
10/01/210210/01/2102
10/08/201010/01/2102
The same pattern is repeated 2 more times with Blue values of 10/08/2010 and then 12/14/2007.
Here is the SQL:
SELECT Long_List.Yellow,Short_List.Blue
FROM
(
SELECT DISTINCT BirthDate AS Blue
FROM (
SELECT DISTINCT BirthDate FROM citizens
[Code] .....
View 9 Replies
View Related
Mar 22, 2007
Hello,
I wonder how and if this can be achieved:
In a tabular report I have one or more columns that need to be repeated on every new physical page when printed.
Viewing the report in the ReportViewer control allows such columns to be fixed using the "FixedHeader" switch, allowing the user to conveniently scroll the reports content while always having the fixed columns in sight. This is perfect. However, when switching to the Print Layout view or when printing the report, I would like to have these fixed columns be printed on every new page that is generated at the beginning of the table printed.
E.g. I have a report that has a huge number of columns that need to be shown. When printed, the columns need at least 6 pages' width. I would be very convenient if I could repeat e.g. the first column (containing some identificational information) on every of these 6 pages. It wouldn't hurt if e.g. 7 pages would be generated because of the repeated column(s).
Any help is appreciated, thanks a lot!
Frank
View 7 Replies
View Related
Apr 30, 2015
I have a query that gives me a result with a column value for example 4.
I now want to repeat this row 4 times with a new column that calculated from 1 - 4.
Or when column value is 3 I want to repeat row 3 times with new column name 1-3
View 7 Replies
View Related
May 28, 2015
I am  building a report with 3 tablixs using SQL Server 2008. Tablix 3 is long and spans over 3 pages. I am trying to get the header for the  to remain visible on all pages and as we scroll through the end of each page. Now this is a frequently asked question and I have found the approach to achieve the desired results. All approaches involve clicking in the advanced mode of the row and column groups to modify the static and dynamic groups.However, when I click the advanced mode there is no effect. I have attached a picture of the design mode. The tablix3 is grouped by the Department column.
View 9 Replies
View Related
Feb 14, 2008
Hi:
I have one table in which there are almost 800,000 records, and I tried to delete them by SQL stored-procedure in which executing SQL like this: "delete from tablename where date='YYYYMMDD'", once I started this procedure, I noticed SQL server will take most of CPU resources in a short period, but that's not acceptable. and there are some other useful records in this table, we can't use Drop Table.
So my question is "can we delete 1000 records and then sleep awhile, and repeat until all these records are deleted !"
Any refernece will be appreciated, thanks!
View 5 Replies
View Related
Dec 19, 2007
There are 2 tables
tPeople
ID Name
1 Arun
2 B
3 C
tAddress
PeopleID Address
1 Test Address A
1 Test Address B
1 Test Address C
2 Address A
3 Address1
3 Address2
Expected Result
ID Name Address1 Address2 Address3
1 Arun TestAdressA Test Address B Test Address C
2 B Address A
3 C Address1 Address2
Address columns repeated = max(count(Address)) for PeopleID
Help me on this!
I can do it through dynamic sql using Execute sp_executesql
Is there any workaround except this?
View 2 Replies
View Related
Aug 25, 2006
Hi,
I have one data driven task set up in my DTS package. for some reason the connection to data source is not available when my package is scheduled to run,which fails the package.
is there a way, I can set the task to try to execute again after a couple of minutes or 5 mins, maybe a predefined number of times before it fails the package?
Thanks & Regards
Naseem
View 2 Replies
View Related
Jul 22, 2007
Hello All.
I am struggling with the below join block in my stored procedure.
I can't seem to get the duplicate row problem to go away. It seems that SQL is treating each new instance of an email address as reason to create a new row despite the UNIONs.
I understand that if I am using UNION, using DISTINCT is redundant and will not solve the duplicate row problem.
Primary Keys: none of the email address columns are primary keys. Each table has an incrementing ID column that serves
as the primary key.
I am guessing I am encountering this problem because of how
I have structured my Join statements? Is it possible to offer advice without a deeper understanding of my data model or
do you need more information?
Thanks for any tips.
Code:
select emailAddress from Users union
select user_name from PersonalPhotos union
select email_address from EditProfile union
select email_address from SavedSearches union
select distinct email_address from UserPrecedence union
select email_address from LastLogin) drv
Left Join Users tab1 on (drv.emailAddress = tab1.emailAddress)
Inner Join UserPrecedence tab5 on tab5.UserID=tab1.UserID
Left Join PersonalPhotos tab2 on (drv.emailAddress = tab2.user_name)
Left Join LastLogin tab4 on (drv.emailAddress = tab4.email_address)
Left Join EditProfile tab3 on (drv.emailAddress = tab3.email_address)
Left Join SavedSearches tab6 on (drv.emailAddress = tab6.email_address
View 8 Replies
View Related
Nov 4, 2014
I have one table,
Table1:
EventId EventName EventStartDate EventEndDate RepeatCount StartTimeEndTime
1Event1 2014-11-04 00:00:00.0002014-11-25 00:00:00.000 4 4:30 PM6:30 PM
2Event2 2014-11-05 00:00:00.0002014-11-12 00:00:00.000 2 3.00 AM4.00 AM
3Event3 2014-11-01 00:00:00.0002014-11-15 00:00:00.000 3 1.00 PM 2.00 PM
4Event4 2014-10-30 00:00:00.0002014-11-06 00:00:00.000 2 5.30 PM 6.30 PM
5Event5 2014-10-16 00:00:00.0002014-11-16 00:00:00.000 0 5.30 PM 6.30 PM
I want to display 2 weeks Events from Table 1 depends on repeat count
(if event scheduled on Tuesday(2014-11-04) and repeat count is 4 then it should repeat the 2 row of data)
We have to display only upcomming events, if the repeat count is 0 and the startdate and enddate falls by todays date then it should display as a single row.Data's Should be ordered by recent date
Expected Result
S.NoEventIdEventName EventDateTime
11Event1 2014-11-04 00:00:00.000
22Event2 2014-11-05 00:00:00.000
34Event4 2014-11-06 00:00:00.000
43Event3 2014-11-08 00:00:00.000
51Event1 2014-11-11 00:00:00.000
62Event2 2014-11-12 00:00:00.000
73Event3 2014-11-15 00:00:00.000
85Event5 2014-11-16 00:00:00.000
Assume today's date 2014-11-04 00:00:00.000 and time now 3.40 PM
View 8 Replies
View Related
Sep 10, 2015
I have an SSRS report I'm working on. Â I have Row Groups plus details.
A) Â How can I get the row group headers to repeat on every line?
B) I would still like to use the drill down, click the plus sign, and have that work when I export to excel.
Here is the report header: URL....My first thought was is there a way simply to cause the header to repeat. Â I cannot find that anywhere to do that.My second though was to split the cells and copy the fields to all the rows.Here is the same header with split cells:URL....two problems.
A) I cannot split one cell; See the "X" in the second capture.
B) How do I still hid the rows until I drill down.
View 3 Replies
View Related
Mar 5, 2015
I want to make a query with the result like this, where Seqno is the result query which has repeating sequence number for same Field1
Field1Field2SeqNo
BVFUSBVFUS011
BVFUSBVFUS021
BVFUSBVFUS031
BVFRPBVFRP012
BVFRPBVFRP022
[Code] ....
I want the result also no ordered by Field1. it just as the natural order of the table..
View 3 Replies
View Related
May 18, 2015
I am using ssrs 2012 using sql server 2012. I have grouped by project name in the header now it is repeating horizontally i need to repeat it by vertically using project name  grouped by column.
I need this like below :
View 5 Replies
View Related
Nov 30, 2015
We run 2014 enterprise. I tried this with both table and matrix controls to no avail.
In the table scenario, I drag the table control over, instruct ssrs that a group name will go into column 1 and a sales figure in column2. Then I highlight the sales figure cell, add a column group on month number and generate my report off some june and july data.
ssrs understands that the months now expand horizontally but the rows alternate one with june filled in (blanks in july) and the next with july filled in for the same group name. I believe I got all my sort by conditions set but am not sure.Â
I tried all sorts of combos in the tablix and group properties before giving up.
View 3 Replies
View Related
Apr 11, 2008
I've never attempted to use the "Repeat Report Item with Data Region on Every Page " feature before. I'm trying to use it on text boxes with the data region being a matrix. I have a report that is two pages, and the text boxes are only appearing on the first page. Also, the matrix is appearing with zero space between it and the header. Any ideas?
Lindsay
View 1 Replies
View Related
