Dopping The Database Which Is In Emergency Mode
Oct 7, 2004
I have a Database in suspect state and i have changed it to emergency mode and copied all the data and i am trying to delete it or renaming it so that i can recreate the db with the old name as my aplication will be looking for that database name.
When i tried to drop the database it says its in use and cannot be dropped.
And when I tried to rename it It gives me the follwoing message.
To change the NAME, the database must be in state in which a checkpoint can be executed.
Please advise me .
Thanks.
View 3 Replies
ADVERTISEMENT
Jul 11, 2002
I am looking for some advice. On a 6.5 database a user seemed to be having slow response, someone decided to stop and start the services. The database in question went into recovery mode. 24 hours later a network tech decided to stop and start the services again because the database was in recovery still. 5 hours later they decided to run the statement to put the database in Bypass Emergency Mode - "update sysdatabase set status = -32768 where name = 'dbname'", then they decided to set the status to 0 which made the database available again.
What can I do to ensure they did not damage the database? Can I compare the backup prior to the issue with the current database?
Thanks
Bill
View 2 Replies
View Related
Nov 21, 2007
1st question I have to ask is:
Is Emergency Mode the same as Bypass Recovery Mode?
2nd:
I have a SQL2005 Database that was suspect this morning. I put the database in Emergency Mode: alter database {dbname} set emergency.
I did a dbcc checkdb on the database and found some corrupt indexes. I attempted to do a dbreindex on the table and got the error:
Could not run BEGIN TRANSACTION in database '{dbname}' because the database is in bypass recovery mode.
How can I put the database in single_user mode and to a point where I can reindex the 1 table that is causing the problems. I would even be willing to drop the indexes and re-create.
Any suggestions or help would be appreciated!
Thanks in advance.
Pete
View 2 Replies
View Related
Oct 16, 2000
Hi, I don't have any backup file for database. But I do have *.mdf and *.ldf files on tape backup for all the databases on server. Our server has crashed and we are trying to rebuild it. Our DBA is not accessible right now.
Can please anyone help how to put sql server back with all the databases?
I will really appreciate your help...
Thanks a lot in advance..
View 3 Replies
View Related
Jul 27, 2015
how to put sql server database in suspect mode intensely and  get it out from suspect mode to normal mode.
  i am using SQL server 2008 R2
View 5 Replies
View Related
May 9, 2012
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
View 1 Replies
View Related
Sep 12, 2011
One annoying problem has occurred....I want to put database in offline mode....but it is giving me some error...
"ALTER DATABASE failed because a lock could not be placed on database [database]. Try again later. ALTER DATABASE statement failed. (Microsoft SQL Server, Error: 5061)" ...
View 7 Replies
View Related
Jan 18, 2007
Durning install I selected Window's Authentication only, but now it seems we may need to use a Mixed Mode with an SA account etc... is there anyway to switch SQL 2005 to use Mixed Mode after the fact?
View 1 Replies
View Related
Jul 25, 2014
We have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
View 1 Replies
View Related
Mar 9, 2000
Hello,everyone!!
There is a query which when executed in the grid mode(ctrl+d) takes approx 0.02 seconds(about 21,000
rows) But when I execute in the text mode, it takes about 0.40 seconds!!
Why is this difference?
Also, when the records from this table are read from a VB application, they are equally slow (as in the text mode!)
Why is it so slow on the text mode & relatively faster in the grid mode?
Has anyone got any idea on ‘Firehose’ style cursor ?(which may speed up access of data in the VB application)
Rgds,
Adie
View 1 Replies
View Related
Sep 4, 2006
Hello All,I am having trouble with a stored procedure I am working on. Just a little background, I am trying to do a GridView inside another GridView but the trouble I am having is that each row in the Parent GridView is display the entire Child GridView. What I want to do is basically for GridView1 (Parent) Row 1 should display GridView2 (Child) Row1. So I thought let me just pass three parameters.Any Help would be greatly apperciated Field – The Column I wantProject – The Project IDTPC – Name This is the stored procedure I am working on… CREATE PROCEDURE dbo.Portal_FinancialGetJanuary( @TPC nvarchar(50), @Project int @Field varchar(1000)) AS SET NOCOUNT ON SELECT @Field, MonthFROM Portal_FinancialForecastingWHERE(((Portal_FinancialForecasting.TPC) = @TPC) AND (Portal_FinancialForecasting.Month = 'January') AND (Portal_FinancialForecasting.Project = @Project))
View 2 Replies
View Related
Jul 25, 2000
hi,
i am getting problem in sql65, service pack5a.
for some tables in my database it is showing null. I cannot able to see the records in a table. I can see these tables in sysobjects table.
owner of the some tables is "null".
I executed following query to get the table name as well as owner.
select owner = user_name(uid), name , type
from sysobjects where name = 'published_docs'
Result:
owner name type
----- ----- -----
(null) published_docs u
--Pls give any ideas.
Dont say go to 65 discussion board(sorry i am in urgent)
thank you very much
--Devi
View 1 Replies
View Related
Oct 26, 2005
Hi all,
My window xp pro suddenly cannot reboot any more.
luckily, I can get into safe mode with command prompt.
So before doing any repair or even reinstallation of the op.
I need to back up my database using transact-sql in order to restore later on completely if have to reinstall my OP system.
I have MSDE installed on my computer. so osql.exe is available
for me to back up the database. I did before with the backup command, but it's a while ago. since this time the backup is so precious to me. I want you guys to back me up.
I will go to osql dir in C:program filesmicrosoft SQL server...
then issue:
backup database CMCTIS to disk='D:sqlbackupcmcbackup.dat'
CMCTIS is the database name and d:sqlbackupcmcbackup.dat is the file I want to use later on
to restore. Since if I will probably do repair or reinstallation, the information on C: will be wiped out or damaged. that's why I will use D: drive for the backup.
Please confirm.
So later on I can restore database completely including data and store procedures, database changes, right?
I have several databases and two server instances. I have to back up database one by one right?
Please reply at your earliest convenience. Otherwise I will lose all three month database work.
Betty
View 5 Replies
View Related
Mar 3, 2006
our one of our website is down. I try to reboot the server and restart the services. It didn't help. One of our user try to ftp. But also it said he has no permission on it. Do you know what can i do?
Thanks.
View 1 Replies
View Related
Nov 20, 2005
I have just deleted a clients database by mistake ( working too many hours this weekend!). I have recovered the actual files with Ontrack file recovery software.
I have tried to attach the mdf but SQL says it's not a valid sql database file. I have also created a new database of the same name , stopped sql, copied over the original files and re-started sql . SQL ( 2000) then marks the datbase as suspect.
Does anyone have a possible
thx
Stressed & Desperate.
No backups available . No lectures please... i've just learn't the VERY hard way !!
<edit> Moved to Data Corruption forum </edit>
View 5 Replies
View Related
Dec 4, 2006
Hi all!
I need an emergency help, I will have to give this assignment tomorrow...
what is the name of the function which makes this view:
I 1
F 2
I 4
C 2
F 3
I 1
C 1
into this:
I 6
C 3
F 5
Thanks,
Balázs
View 1 Replies
View Related
Dec 4, 2006
I don't know why the last topic is locked, but here is the situation more detailed.
I know that the group by is the answer for my last question.
But the situation is sadly not this easy:
We have a Donortype table and it looks like this:
D DONORTARGETQ1 DONORTARGETQ2 DONORTARGETQ3 DONORTARGETQ4
- ------------- ------------- ------------- -------------
C 400 400 500 500
F 300 350 400 500
I 125 150 200 275
3 rows selected.
The first column is called donortype. That's what we have to use.
The contribution table looks like this:
CONTRIBUT DONORID CONTRIBUTIONAMOUNT PROGRAMNAME MEMBERNUMB
--------- ---------- ------------------ ------------------------------ ----------
03-JAN-06 2 200 Basic Research 5
07-JAN-06 3 150 Applied Research 3
27-JAN-06 7 50 Teaching Programs 1
05-FEB-06 6 100 International Programs 2
23-FEB-06 2 50 International Programs 1
03-MAR-06 1 100 Basic Research 6
30-MAR-06 5 75 Basic Research 1
15-APR-06 6 50 Teaching Programs 4
09-MAY-06 4 100 Applied Research 2
14-MAY-06 7 100 International Programs 5
29-MAY-06 7 100 Applied Research 5
11-JUN-06 5 50 Teaching Programs 5
18-JUN-06 6 75 Applied Research 2
23-JUN-06 3 50 Basic Research 3
10-JUL-06 1 100 Teaching Programs 3
16-JUL-06 4 100 International Programs 2
22-JUL-06 6 75 Applied Research 4
15-AUG-06 5 60 Applied Research 1
23-AUG-06 2 150 International Programs 1
09-SEP-06 3 175 Applied Research 6
18-SEP-06 6 150 Teaching Programs 2
01-OCT-06 2 80 International Programs 5
13-OCT-06 1 50 Basic Research 6
30-OCT-06 5 25 Applied Research 1
11-NOV-06 4 100 Teaching Programs 4
24-NOV-06 2 100 Applied Research 5
10-DEC-06 7 200 Basic Research 1
20-DEC-06 3 85 International Programs 6
28 rows selected.
We have the DonorID and the ContributionAmount here.
We also have a Donor table:
DONORID DONORNAME D DONORPROJECTION
---------- ------------------------------ - ---------------
1 Crabtree I 50
2 Genetix C 100
3 Marlo I 55
4 Mervis F 60
5 Orange Computers C 50
6 Roper Foundation F 70
7 Keltron, Inc. C 85
7 rows selected.
The third column is DonorType as well.
What I have to create is something like this
DonorType ContributionAmount
I 100
F 300
C 250
Where the 100 is the sum of ContributionAmounts performed by DonorID-s which have a DonorType I
and 300 is the sum of ContributionAmounts performed by DonorID-s which have a DonorType F
and so on...
(the numbers are made up, they are probably not correct...)
My idea was that let's create a view with DonorID and sum(ContributionAmount) grouped by DonorID.
Than join this view with the DonorType table, and create a view which contains DonorId, DonorType and sum(ContributionAmount) from the first view.
And what now?! HOw do you group this by DonorType?
View 1 Replies
View Related
Jun 3, 2006
dear:
can anyone tell how to connect to Microsoft Mobile Server 2005 using System.Data.SqlceConnection or using System.oledbConnection connect to Microsoft Access DataBase in Pocket Pc or windows CE program?
dose there any minimum requirements i need to install?would you like to list a list for me
thanks alot.
View 1 Replies
View Related
May 12, 2000
I have a database in suspect mode. There is no backup of this database.
I've followed the troubleshooting and it isn't working out.
There are 3 steps:
1. execute sp_resetstatus
2. use alter database to add data file or log file to the database
3. stop and restart SQL Server
4. free disk space and rerun recovery
I've tried to make it, but the step # 2 haven't worked.
Then I tried step 3, however the database is still in suspect mode.
What should I do?
Is there something I am missing?
Thanks,
Fábio
View 1 Replies
View Related
Apr 19, 2004
Hi
my database went into suspect mode. i tried to reset the status database by "sp_resetstatus abc". It is giving the message
"Prior to updating sysdatabases entry for database 'cr2db', mode = 0 and status = 260 (status suspect_bit = 256).
For row in sysdatabases for database 'cr2db', the status bit 256 was forced off and mode was forced to 0.
Warning: You must recover this database prior to access."
please let me if you have any solution to this problem.
thank you in advance
ricky
View 14 Replies
View Related
Mar 26, 2005
Recently I read such statments 'When SQL Server is run in "lightweight pooling" mode (fiber mode) and the DTC service is started, unexpected behavior may occur.'
Can someone say anything about fibe mode?I am appreciated for it.:)
View 3 Replies
View Related
Jul 16, 2007
Hi,
Currently, our Report Builder is running on Local Intranet mode. I'm investigating what the security implications are in changing it to Internet mode. However, I've not been able to find any documentation on this.
Does anyone know of any documentation that addresses this issue or have experience that they can share with changing Report Builder security zone from Intranet mode to Internet mode?
Thanks very much.
View 1 Replies
View Related
Nov 16, 2000
I am trying to replicate between two servers. I am pushing a subscription to the other server. Of course this has to write to a file on the Servers hard drive before the actual replication. (It's actually trying to write a shared drive on the server) I have checked the permissions all day and I keep getting the same thing; 'The process could not create file [path to file] the network name cannot be found' What should I check? I have checked the permissions on the drive all the way down to the folder and It hasnt helped. I have checked the host files to make sure the ip address is correct in the file. I dont understand the network name error because it's trying to write to itself. Is there anyone out there that can help me???? PLEASE????
View 2 Replies
View Related
May 9, 2006
Dear All,
We have a big concern in our Database system. We have 2000 transactions daily in our database. We need to replicate some how the database for our fail over setup. I tried transactional replication at midnight but our all systems locked and we had a lot of complaints from the customers and It was taking a lot of time to snapshot part and I had to abort it because of these reasons.
I need an advice how I can create a replication or is there any other way to replicate or is there any way to do this process without bothering the system? Please give me some advice and help..
View 1 Replies
View Related
May 10, 1999
I have a 6.5 DB in which I lost a hard drive and have to recreate the Databases. I do have the original and latest device file ***.DAT which contains all of my application Data. Is there a way I can re-create the DB and point to use this device and keep my data???
A quick response is greatly appreciated!
View 1 Replies
View Related
Apr 15, 2008
Hi all - had a bit of a nightmare at work with order accounts application. Basically - all the orders have been set to uninvoiced and I need to set the ones which have been invoiced back to invoiced. Problem is that orders can be part invoiced.
Tables as follows:
orders
orderid PK int
invoiced int
orderline
orderid int
qty int
productid int
invoices
invoiceid PK int
orderid int
invoiceline
invoiceid int
qty int
productid int
There can be multiple invoices for each order
Question is - how can I write a query which updates the order table - set invoiced to 1 where there are the same amount of items in the order as in the related invoices?
Real emergency this one folks!
Hopefully someone can help me out!
Stephen.
View 8 Replies
View Related
Dec 4, 2006
I absolutely agree with you.
I managed to find the error, it was a typo.
Here is the code, if somebody is interested about it. It is oracle, not SQL server, but the idea is the same.
drop view a;
drop view b;
drop view figure5_9;
create view a
as
select d.donorID, dt.donortype, dt.donortargetq1
from donortype dt, donor d
where d.donortype=dt.donortype;
select * from a;
create view b
as
select a.donortype, sum(c.ContributionAmount) as amount
from Contribution c, a
where c.ContributionDate between '01-JAN-06' and '31-MAR-06' and a.donorID=c.donorID
group by a.donortype;
select * from b;
create view figure5_9
as
select b.donortype, a.donortargetq1, b.amount, b.amount/a.donortargetq1 as percentage
from a, b
where a.donortype=b.donortype
group by b.donortype, a.donortargetq1, b.amount;
select * from figure5_9;
Thanks for the help anyway ;-)
View 2 Replies
View Related
May 10, 2006
Dear All,We have a big concern in our Database system. We have 2000 transactionsdaily in our database. We need to replicate some how the database forour fail over setup. I tried transactional replication at midnight butour all systems locked and we had a lot of complaints from thecustomers and It was taking a lot of time to snapshot part and I had toabort it because of these reasons.I need an advice how I can create a replication or is there any otherway to replicate or is there any way to do this process withoutbothering the system? Please give me some advice and help..Thanksasa.
View 9 Replies
View Related
Feb 26, 2002
Hi,
Could anyone please tell me steps to recover the database from the suspect
mode. The backup I got is very old. Can it be recovered without the backup.
Thanks in advance
John Jayaseelan
View 1 Replies
View Related
Apr 13, 2001
Hi,
When i tried to restore database from the Network m/c ...upto 60% of the restoration process went well,But after that i got message saying that
" Communication link failure " then database went in to LOAD/SUSPECT mode,
This happend in Active/Active Cluster environment and at the same point of time Fail over occured and resources moved to other node.
i tried by running SP_RESETSTATUS stored procedure to change the status of the Database ,But no use...
Then i deleted the Database and recreated and restored.. because it was a test server...BUT if it happens in Production what to do?????.....
Is there anyway to over come such situations...
Thanks in advance
Mar R
View 1 Replies
View Related
Jun 27, 2007
Hi
The database is stuck on a restoring mode.
How can i get it back online or in a read only mode?
Sql 2005 Server
Stefan:confused:
View 3 Replies
View Related
Sep 14, 2004
I have been migrating Databases from a SQL Server 7.0 Instance to a 2000 Instance. Basically the method I use is as follows:
a)Create a new Database on the Destination Server (same name as the Source) When I create the new Database on my destination server, the compatibility mode is '80' and the source is always '70'
b) do a 'revlogin' on the Source Server and use the output from that query to recreate the logins on the destination server
c) make sure that the default DB for the newly creates logins are correct and change them if necessary
d) Backup the DB on the Source Server and Restore it to the Destination Server.
e) Check login permissions and fix any orphaned users - usually I don't find any that need to be fixed, but I always check.
I've read BOL on Changing the compatibility mode on the Database... but I'm still unsure when I would have to do this and why???????????????? SHOULD I be changing the compatiblity mode from 80 to 70 when migrating Databases from 7.0 to 2000???? Any advice on moving DBs in this manner would be appreciated.
View 2 Replies
View Related
Sep 4, 2006
Hi all
My database 'a2rd' was marked as suspect
and i did the following steps to make it available
USE MASTER
select name, dbid, mode, status from sysdatabases where dbid =
db_id('a2rd')
UPDATE SYSDATABASES SET STATUS=-32768 WHERE NAME='a2rd'
EXEC sp_configure 'show advanced option', '1'
EXEC sp_configure 'allow updates', '1'
RECONFIGURE WITH OVERRIDE
DBCC NEWALLOC(a2rd)
DBCC TEXTALL (a2rd)
DBCC CHECKDB (A2RD
now how can i take the backup of the database that was in emergency mode..
Thanks in advance..
View 2 Replies
View Related
