Double Loop In Stored Procedure
Mar 15, 2006
Dear All,
I’m working on a stored procedure that meant to mail out users some of their action items daily.
The procedure has a double loop, first the user ids and user email addresses are selected into a table, then the outer loop cycles through the user ids and selects relevant action items to another table. The inner loop then cycles through these action items and at the end of each outer loop a string is mailed out.
Problem is that as the outer loop selects the relevant items for a user, the table holding the action items basically gets filled with more and more records and the inner loop then adds every item in the table to the string that gets mailed out, ending up with more and more items going to all the users.
I have tried to delete all records from the actionItems table at the end of each outer loop after the content of the action Items are mailed out, however this seems to keep the actionItems table empty at all times.
Not sure if this description is clear enough but I can’t see where I’m going wrong in terms of approach.
Any ideas?
View 5 Replies
ADVERTISEMENT
Oct 18, 2006
Stored Procedure ProblemThis is probably a simple problem but i would appreciate some help.I have a stored procedure that takes the order date time plus other information fromvarious tables but the information is being returned double:ie 4 rows are being returned instead of two. Can anyone see where i am going wrong?Many thanksMartinThis is the stored procedureALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct OD.DateCreated, O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNThese are the results that are returnedDateCreated OrderID UserID OrderTotal Sent Delivered Paid CustomerName ----------------------- ----------- ------------------------------------ ---------------- ------ --------- ------ --------------- 18/10/2006 14:49:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 14:49:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(4 row(s) returned)If I leave OD.DateCreated ie use ALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNthen there is no problem. I get:41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(2 row(s) returned)
View 2 Replies
View Related
Jul 10, 2014
All of a sudden hen I script out a Stored Procedure it encloses strings (edit) in Double Quotes?
For example ANDPromo.[Group] IN (''FL_Small'',''FL_Large'')
Also it generates this code that I do not want. I just was Create Procedure...
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[usp_IncentiveReport]') AND type in (N'P', N'PC'))
BEGIN
EXEC dbo.sp_executesql @statement = N'
What options do I need to set?
View 5 Replies
View Related
Jan 18, 2008
I have a table that is basically set up so there is an employee_id, field_id, and a value... it looks sort of like this (in reality there are over 450 different employee ID's)
employee_id field_id value
100 1 Brian
100 2 617-555-5555
100 3 Boston Office
101 1 Mary
102 2 617-666-6666
101 3 New york office
I want to loop thru this table so "for each" distinct employee ID, I can do an insert statement into another table where it is setup a little cleaner
I know how to declare the variables, and set each variable = to the correct value, and how to do the INSERT once, but I am not 100% sure how to set up the loop so it will do each individual employee_ID.
Any suggestions?
View 9 Replies
View Related
Feb 21, 2008
How do I write a stored procedure to loop through all the records to see if duedate is passed today's date then send an email to those users
Dim duedateDim @emailDim ocdoEmail As New Object
while duedate < DATEADD(day, DATEDIFF(day, '20010101', CURRENT_TIMESTAMP), '20010101') (sending the email)ocdoEmail = Server.CreateObject("CDO.Message")
ocdoEmail.To = @email
ocdoEmail.From =
ocdoEmail.CC =
ocdoEmail.Subject = "Your Item is passed due"ocdoEmail.HTMLBody = " was shipped to you on " & ShipDateTxt.Text & " and due on " & DueDateTxt.Text
ocdoEmail.send()
Don't know which loop I should use and how to set it up.
Thanks!
dim @duedatedim @email
while
View 4 Replies
View Related
Jul 31, 2014
I have two tables one hold all Friday dates for given year (col1 ID, col2 date), second table have three column col1, col22, col3. What I need to do is insert the first Friday date into the second table for col1 and second Friday into col2, third Friday in col3, fourth Friday in col1 and the process repeat until all Friday dates are inserted. I would like to use While loop but stuck on how to iterate through table one to get the data.
Example:
table1 data
101/03/2014
201/10/2014
301/17/2014
401/24/2014
501/31/2014
602/07/2014
702/14/2014
802/21/2014
table2 data should look after insert compelete.
col1 col2 col3
01/03/2014 01/10/2014 01/17/2014
01/24/2014 01/31/2014 02/07/2014
02/14/2014 02/21/2014
View 2 Replies
View Related
Oct 26, 2006
I have gridview display a list of users. I have added a column for a check box. If the box is checked I move the users to another table.I need to pass some parameter of or each row to a stored proc. My question. In the loop where I check if the checkbox is selected I need to call the stored procedure.Currently I do an open and closed inside the loop.What is best and most effficent method of doing this should I open and close the connection outside the loop and change the procs parameters as loop through. System.Data.SqlClient.SqlConnection conn =
new System.Data.SqlClient.SqlConnection(
System.Configuration.ConfigurationManager.ConnectionStrings["connString"].ConnectionString);
System.Data.SqlClient.SqlCommand commChk = new System.Data.SqlClient.SqlCommand("storedProc", conn);
commChk.CommandType = System.Data.CommandType.StoredProcedure;
commChk.Parameters.AddWithValue("@mUID", ddMainUser.SelectedValue.ToString());
commChk.Parameters.AddWithValue("@sUId", gvUsers.Rows[i].Cells[2].Text);
commChk.Connection.Open();
commChk.ExecuteNonQuery();
conn.Close(); If so exactly how do I do this? How do I reset the parmaters for the proc? I haven't done this before where I need to loop through passing parameter to the same proc. thanks
View 2 Replies
View Related
May 17, 2008
Hi, how do I loop through a table in a store procedure? I need to check the all the record in a table and do some logic and then insert or update another table base on the logic?
View 4 Replies
View Related
Jun 8, 2004
What is wrong with this stored procedure? This should work right?
Create PROCEDURE UpdRequestRecordFwd
@oldITIDint ,
@newITID int
AS
Declare @RRID int
Declare @APID int
Declare crReqRec cursor for
select RRID from RequestRecords where ITID = @oldITID
open crReqRec
fetch next from crReqRec
into
@RRID
while @@fetch_status = 0
Begin
Update RequestRecords
set ITID = @newITID
where RRID = @RRID
FETCH NEXT FROM crReqRec
into
@RRID
end
close crReqRec
deallocate crReqRec
GO
View 4 Replies
View Related
Jan 17, 2006
Below is a stored procedure that designed to populate a drop down menu system on a website. It works fine as long as the 'id's in the first select start at 1 and are sequential. It fails to grab all the sub tables if the ids are not sequential. So, how do I structure the loop so that the WHERE clause uses not the loop iterator, but rather, the ids from the first Select statement.
Alternatively, is there a more elgant approach that will return the same set of recordsets?
Any help would be much appreciatedThanks
ALTER PROCEDURE dbo.OPA_GetMenuItemsASDeclare @i tinyint ,@tc tinyintSet @i = 1
/* Select for top level menu items*/
SELECT id, label, url, sortFROM mainNavORDER BY sort
Set @tc = @@rowcount
while @i <= @tc
beginSet @i = (@i + 1)
/* Select for submenu itemsSELECT id, label, url, sort, mainNavIdFROM SubNavWHERE (mainNavId = @i)ORDER BY mainNavId, sortend
RETURN
View 7 Replies
View Related
Jan 17, 2006
Below is a stored procedure that designed to populate a drop down menu system on a website. It works fine as long as the 'id's in the first select start at 1 and are sequential. It fails to grab all the sub tables if the ids are not sequential. So, how do I structure the loop so that the WHERE clause uses not the loop iterator, but rather, the ids from the first Select statement.
Alternatively, is there a more elgant approach that will return the same set of recordsets?
Any help would be much appreciated
Thanks
ALTER PROCEDURE dbo.OPA_GetMenuItems
AS
Declare @i tinyint ,
@tc tinyint
Set @i = 1
/* Select for top level menu items*/
SELECT id, label, url, sort
FROM mainNav
ORDER BY sort
Set @tc = @@rowcount
while @i <= @tc
begin
Set @i = (@i + 1)
/* Select for submenu items*/
SELECT id, label, url, sort, mainNavId
FROM SubNav
WHERE (mainNavId = @i)
ORDER BY mainNavId, sort
end
RETURN
View 6 Replies
View Related
Mar 16, 2015
We're running SQL Server 2008 and have run into a bit of a situation. We have 5 databases all with the same tables and we are trying to create a query that will loop through the different databases and output the results per company database. I originally did a cursor, but my boss wants the query to be in a more readable format:
His ideal wish would be the query in a stored procedure and the cursor to create the input parameter for the stored procedure for the different databases.I've tried looking through some forums and googling some possibilities but can't seem to make any sense of them.
declare @dbname varchar(100)
,@sql varchar(max)
createtable #TempDBs (
dbname nvarchar(100)
, Orig_Jnl int
, BaseRef int
, Posting_Date date
[code]....
View 7 Replies
View Related
Oct 13, 2007
I would like to know what are the ways to call a parameterized stored procedure within a loop in ASP.NET.
Scenario:
I have a loop through a dataSet and for each record I am going to execute a stored procedure to insert data in many tables.
I can not use the following syntax:
cmd.CommandType = CommandType.StoredProcedure
cmd.CommandText = "dbo.storedprocedurename"
With cmd
.Parameters.Add(New SqlClient.SqlParameter("@param1", paramValue1))
.Parameters.Add(New SqlClient.SqlParameter("@param2", paramValue2))
End With
What are the other ways to execute the parameterized stored procedures within a loop in ASP.NET?
Thanks,
Carlos
View 4 Replies
View Related
Aug 19, 2014
I would like to write a store prodecure to return a month:
My output:
Wk1 = July
Wk2 = July
Wk3 = July
Wk4 = July
Wk5 = Aug
and so on..
then i create list of array like below:
The counter for insert the week one by one
DECLARE @TotalWeek INT, @counter INT
DECLARE @WeekNo varchar, @Month varchar
SET @WeekNo = '4,9,14,18,22,27,31,35,40,44,48,53'
--this is weekno,if less than 4, month is july, lf less than 9, month is august and so on
SET @TotalWeek = 53
SET @counter = 1
[Code] ....
View 8 Replies
View Related
Sep 18, 2015
I appear to be having an issue where the @LetterVal and @Numeric variables aren't resetting for each loop iteration, so if no results are found, it just returns the previous loops values since they aren't overwritten. Â Below is the stored procedure I've created:
ALTER PROCEDURE [dbo].[ap_CalcGrade]Â
-- Add the parameters for the stored procedure here
@studId int,
@secId int,
@grdTyCd char(2),
@grdCdOcc int,
@Numeric int output,
[Code] ....
And below is the "test query" I'm using:Â
-- Â *** Test Program ***
Declare @LetterVal varchar(2), -- Letter Grade
    @Numeric  int,     -- Numeric Grade
    @Result   int     -- Procedure Status (0 = OK)Â
Execute @Result = dbo.ap_CalcGrade 102, 86, 'QZ', 3,Â
[Code] ....
This is resulting in an output of:Â
A+ 97
A+ 97
C- 72
but it should be returning the output below due to the 2nd data set not being valid/found in the sp query:
Â
A+ 97
No Find
C- 72
I'm sure this is sloppy and not the most efficient way of doing this, so whats causing the errant results, and if there is any better way I should be writing it. Â Below is the assignment requirements:
Create a stored procedure using the STUDENT database called ap_CalcGrade that does the following:
1. Accepts as input STUDENT_ID, SECTION_ID, GRADE_TYPE_CODE, and GRADE_CODE_OCCURRENCE
2. Outputs the numeric grade and the letter grade back to the user
3. If the numeric grade is found, return 0, otherwise return 1
4. You must use a cursor to loop through the GRADE_CONVERSION table to find the letter grade
View 6 Replies
View Related
Apr 13, 2008
This is my first attempt at a loop in a stored procedure, and it is not working, but the rest of the sp works fine. Could anyone please provide me with some feedback. I am not sure if I need to execute the loop first or all the sp at once ? Thanks so much.CREATE PROCEDURE Table_1TT_1T (@PartNo varchar(20), @Wkorder varchar(10), @Setup datetime, @Line smallint, @TT integer, @Tester smallint, @LT1 integer, @LT2 integer, @LT3 integer, @LT4 integer, @LT5 integer, @LT6 integer, @LT7 integer, @LT8 integer, @LT9 integer, @LT10 integer, @LT11 integer, @LT12 integer, @LT13 integer, @LT14 integer, @LT15 integer, @LT16 integer, @LT17 integer, @LT18 integer, @LT19 integer, @LT20 integer, @LT21 integer, @LT22 integer, @LT23 integer, @LT24 integer, @LT25 integer, @LT26 integer, @LT27 integer, @LT28 integer, @LT29 integer, @LT30 integer, @LT31 integer, @LT32 integer, @LT33 integer, @LT34 integer, @LT35 integer, @LT36 integer, @UnitFound integer OUT, @parameters_LamType varchar(50) OUT, @parameters_Shunt real OUT, @parameters_ShuType varchar(50) OUT, @parameters_Stack real OUT, @parameters_Steel varchar(50) OUT, @Partno11 varchar(20) OUT, @Wkorder11 varchar(10) OUT, @Partno12 varchar(20) OUT, @Wkorder12 varchar(10) OUT, @Partno24 varchar(20) OUT, @Wkorder24 varchar(10) OUT, @Partno29 varchar(20) OUT, @Wkorder29 varchar(10) OUT, @Partno34 varchar(20) OUT, @Wkorder34 varchar(10) OUT, --@DL1 integer OUT, --@DL2 integer OUT, --@DL3 integer OUT, --@DL4 integer OUT, --@DL5 integer OUT, --@DL6 integer OUT, --@DL7 integer OUT, --@DL8 integer OUT, --@DL9 integer OUT, --@DL10 integer OUT, @DL11 integer OUT, @DL12 integer OUT, --@DL13 integer OUT, --@DL14 integer OUT, --@DL15 integer OUT, --@DL16 integer OUT, --@DL17 integer OUT, --@DL18 integer OUT, --@DL19 integer OUT, --@DL20 integer OUT, --@DL21 integer OUT, --@DL22 integer OUT, --@DL23 integer OUT, @DL24 integer OUT, --@DL25 integer OUT, --@DL26 integer OUT, --@DL27 integer OUT, --@DL28 integer OUT, @DL29 integer OUT, --@DL30 integer OUT, --@DL31 integer OUT, --@DL32 integer OUT, --@DL33 integer OUT, @DL34 integer OUT) --@DL35 integer OUT, --@DL36 integer OUT)ASSET @Tester = 1WHILE @Tester < 36 BEGIN Set @Line = (Select Line from dbo.location where Tester = @Tester) IF @Line = 453 BEGIN If @Tester = 1 BEGIN SET @LT1 = 453 END If @Tester = 2 BEGIN SET @LT2 = 453 END If @Tester = 3 BEGIN SET @LT3 = 453 END If @Tester = 4 BEGIN SET @LT4 = 453 END If @Tester = 5 BEGIN SET @LT5 = 453 END If @Tester = 6 BEGIN SET @LT6 = 453 END If @Tester = 7 BEGIN SET @LT7 = 453 END If @Tester = 8 BEGIN SET @LT8 = 453 END If @Tester = 9 BEGIN SET @LT9 = 453 END If @Tester = 10 BEGIN SET @LT10 = 453 END If @Tester = 11 BEGIN SET @LT11 = 453 END If @Tester = 12 BEGIN SET @LT12 = 453 END If @Tester = 13 BEGIN SET @LT13 = 453 END If @Tester = 14 BEGIN SET @LT14 = 453 END If @Tester = 15 BEGIN SET @LT15 = 453 END If @Tester = 16 BEGIN SET @LT16 = 453 END If @Tester = 17 BEGIN SET @LT17 = 453 END If @Tester = 18 BEGIN SET @LT18 = 453 END If @Tester = 19 BEGIN SET @LT19 = 453 END If @Tester = 20 BEGIN SET @LT20 = 453 END If @Tester = 21 BEGIN SET @LT21 = 453 END If @Tester = 22 BEGIN SET @LT22 = 453 END If @Tester = 23 BEGIN SET @LT23 = 453 END If @Tester = 24 BEGIN SET @LT24 = 453 END If @Tester = 25 BEGIN SET @LT25 = 453 END If @Tester = 26 BEGIN SET @LT26 = 453 END If @Tester = 27 BEGIN SET @LT27 = 453 END If @Tester = 28 BEGIN SET @LT28 = 453 END If @Tester = 29 BEGIN SET @LT29 = 453 END If @Tester = 30 BEGIN SET @LT30 = 453 END If @Tester = 31 BEGIN SET @LT31 = 453 END If @Tester = 32 BEGIN SET @LT32 = 453 END If @Tester = 33 BEGIN SET @LT33 = 453 END If @Tester = 34 BEGIN SET @LT34 = 453 END If @Tester = 35 BEGIN SET @LT35 = 453 END END SET @Tester = @Tester + 1 ENDSELECT @parameters_LAMTYPE = LAMTYPE, @parameters_SHUNT = SHUNT, @parameters_SHUTYPE = SHUTYPE, @parameters_STACK = STACK, @parameters_STEEL = STEEL FROM DBO.PARAMETERS A INNER JOIN .DBO.XREF B ON A.PARTNO = B.XREF WHERE B.PARTNO = @PARTNO SET @UnitFound = @@rowcountIF @UnitFound = 0 BEGIN SELECT @parameters_LAMTYPE = LAMTYPE, @parameters_SHUNT = SHUNT, @parameters_SHUTYPE = SHUTYPE, @parameters_STACK = STACK, @parameters_STEEL = STEEL FROM DBO.PARAMETERS WHERE PARTNO = @PARTNO SET @UnitFound = @@rowcount END --IF @LT1 = @Line BEGIN SET @DL1 = 1 END --IF @LT2 = @Line BEGIN SET @DL2 = 1 END --IF @LT3 = @Line BEGIN SET @DL3 = 1 END --IF @LT4 = @Line BEGIN SET @DL4 = 1 END --IF @LT5 = @Line BEGIN SET @DL5 = 1 END --IF @LT6 = @Line BEGIN SET @DL6 = 1 END --IF @LT7 = @Line BEGIN SET @DL7 = 1 END --IF @LT8 = @Line BEGIN SET @DL8 = 1 END --IF @LT9 = @Line BEGIN SET @DL9 = 1 END --IF @LT10 = @Line BEGIN SET @DL10 = 1 END IF @LT11 = 453 BEGIN SET @Partno11 = @Partno SET @Wkorder11 = @Wkorder SET @DL11 = 1 END --IF @LT11 = @Line BEGIN SET @DL11 = 1 END IF @LT12 = 453 BEGIN SET @Partno12 = @Partno SET @Wkorder12 = @Wkorder SET @DL12 = 1 END --IF @LT13 = @Line BEGIN SET @DL13 = 1 END --IF @LT14 = @Line BEGIN SET @DL14 = 1 END --IF @LT15 = @Line BEGIN SET @DL15 = 1 END --IF @LT16 = @Line BEGIN SET @DL16 = 1 END --IF @LT17 = @Line BEGIN SET @DL17 = 1 END --IF @LT18 = @Line BEGIN SET @DL18 = 1 END --IF @LT19 = @Line BEGIN SET @DL19 = 1 END --IF @LT20 = @Line BEGIN SET @DL20 = 1 END --IF @LT21 = @Line BEGIN SET @DL21 = 1 END --IF @LT22 = @Line BEGIN SET @DL22 = 1 END --IF @LT23 = @Line BEGIN SET @DL23 = 1 END IF @LT24 = 453 BEGIN SET @Partno24 = @Partno SET @Wkorder24 = @Wkorder SET @DL24 = 1 END --IF @LT25 = @Line BEGIN SET @DL25 = 1 END --IF @LT26 = @Line BEGIN SET @DL26 = 1 END --IF @LT27 = @Line BEGIN SET @DL27 = 1 END --IF @LT28 = @Line BEGIN SET @DL28 = 1 END IF @LT29 = 453 BEGIN SET @Partno29 = @Partno SET @Wkorder29 = @Wkorder SET @DL29 = 1 END --IF @LT30 = @Line BEGIN SET @DL30 = 1 END --IF @LT31 = @Line BEGIN SET @DL31 = 1 END --IF @LT32 = @Line BEGIN SET @DL32 = 1 END --IF @LT33 = @Line BEGIN SET @DL33 = 1 END IF @LT34 = 453 BEGIN SET @Partno34 = @Partno SET @Wkorder34 = @Wkorder SET @DL34 = 1 END --IF @LT35 = @Line BEGIN SET @DL35 = 1 END --IF @LT36 = @Line BEGIN SET @DL36 = 1 ENDGO
View 1 Replies
View Related
Apr 27, 2004
Help! I'm very tired (and new at this) and have looked for a solution in many places. I have an Employee table with a one to many Revenue table. All revenue types are in this table. I need the goals and actuals (two different revenue types) for a datagrid.
This is the result. Because I am looking at two revenue types, the result is providing 2 rows of data instead of one. what is the best way to combine this.
Region FullName SHARP Year Ann Goal YTD Goal YTDActual
Region1 Doe10, John X 2003 20400 5100 0 Select
Region1 Doe10, John X 2003 0 0 3987 Select
Region1 Doe11, John X 2003 29645 7411.25 0 Select
Region1 Doe11, John X 2003 0 0 5377 Select
Here's my stored procedure:
CREATE PROCEDURE spFilterRegion
@RIDsent As Integer,
@StatusSent As Integer,
@SelectedRegion As NVARCHAR (50) Output
AS
SELECT Region.CountryID,
Employee.RegionID,
Employee.StatusID,
Employee.SHARP,
CASE
When Employee.SHARP = 1 THEN "X"
ELSE ""
END AS SHARPresult,
Employee.LastName,
Employee.FirstName,
Employee.LastName + ', ' + FirstName AS FullName,
Employee.EmployeeID,
Region.RegionName,
ProducerRevenue.RevenueTypeID,
CASE
When ProducerRevenue.RevenueTypeID = 1 Then
SUM(ProducerRevenue.Revenue)
ELSE 0
END AS AnnGoal,
CASE
When ProducerRevenue.RevenueTypeID = 1 Then
SUM(ProducerRevenue.Revenue)/DATEPART(mm, GETDATE())
ELSE 0
END AS YTDGoal,
CASE
When ProducerRevenue.RevenueTypeID = 2 Then
SUM(ProducerRevenue.Revenue)
ELSE 0
END AS Actual,
ProducerRevenue.YearID
FROM Employee
LEFT OUTER JOIN ProducerRevenue
ON Employee.EmployeeID = ProducerRevenue.EmployeeID AND
ProducerRevenue.YearID = DATEPART(yy, GETDATE()) - 1 AND
ProducerRevenue.MonthID < DATEPART(mm, GETDATE()) AND
ProducerRevenue.StatusID = 1 AND
ProducerRevenue.RevenueTypeID <= 2
LEFT OUTER JOIN Region
ON Employee.RegionID = Region.RegionID
WHERE Employee.StatusID = @StatusSent AND
Employee.RegionID = @RIDsent AND
Employee.RoleID = 1
GROUP BY Region.CountryID,
Employee.RegionID,
Region.RegionName,
Employee.RoleID,
Employee.StatusID,
Employee.SHARP,
Employee.LastName,
Employee.FirstName,
Employee.EmployeeID,
ProducerRevenue.RevenueTypeID,
ProducerRevenue.YearID
ORDER BY Region.CountryID,
Employee.RegionID,
Employee.RoleID,
Employee.StatusID,
Employee.SHARP,
Employee.LastName,
Employee.FirstName,
Employee.EmployeeID,
ProducerRevenue.RevenueTypeID,
ProducerRevenue.YearID
View 1 Replies
View Related
Apr 26, 2008
I have a temporary table with multiple records and a Stored Procedure requiring a value. In a Stored Procedure, I want to loop through records in the table and use the value from each record read as input to another Stored Procedure. How do I do this?
View 7 Replies
View Related
Jan 23, 2015
I have to write a Stired Procedure with the following functionality.
Write a simple select query say (Select * from tableA) result is
ProdName ProdID
----------------------
ProdA 1
ProdB 2
ProdC 3
ProdD 4
Now with the above result, On every record I have to fire a query Select SUM(sale), SUM(scrap), SUM(Production) from tableB where ProdID= ["ProdID from above query"].How to write this query in a Stored Procedure so that I can get the required SUM columns for all the ProdID's from first query?
View 2 Replies
View Related
Aug 9, 2006
Over some time now, I've been developing a fairly hefty stored procedure, that does a lot of computations, and fairly few table lookups.
When I look at the performance on my server (a dual Xeon HT) I can see that it only uses 1 out of 4 possible "cpus" to work on the calculations, while the three others idle out, and was wondering if I can somehow force it to use max available CPU power?
View 2 Replies
View Related
May 19, 2011
I am performing a series of calculations where accuracy is very important, so have a quick question about single vs double precision variables in SQL 2008.
I'm assuming that there is an easy way to cast a variable that is currently stored as a FLOAT as a DOUBLE prior to these calculations for reduced rounding errors, but I can't seem to find it.
I've tried CAST and CONVERT, but get errors when I try to convert to DOUBLE.
For example...
SELECT CAST(1.0/7.0 AS FLOAT)
SELECT CONVERT(FLOAT, 1.0/7.0)
both give the same 6 decimal place approximation, and the 6 decimals make me think this is single precision.
But I get errors if I try to change the word FLOAT to DOUBLE in either one of those commands...
SELECT CAST(1.0/7.0 AS DOUBLE)
gives "Incorrect syntax near )"
SELECT CONVERT(DOUBLE, 1.0/7.0)
gives "Incorrect syntax near ,"
View 2 Replies
View Related
Aug 28, 2014
Every night we connect to a remote server using Linked Server and copy details from that database to a loading table, then load it into the 'real' table in our own environment. The remove database we load it from has indexes/primary keys that match the 'real', however the 'loading' table itself does not have any indexes or primary keys, both are SQL Server 2005 machines.
In the loading table we first of all truncate it then do a select insert statement from the remote server, then we then truncate the 'real' table and load iit from the 'loading' table.
The issue is when we attempted to load it into our 'real' table from our loading table there was a duplicate row, and our process failed with a Primary Key violation.
I checked the source with does have the same primary key's in, it did not contain a duplicate row and I checked the loading table and that did contain a duplicate row.
My question this is in what circumstances this could happen ?
View 5 Replies
View Related
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
Mar 3, 2008
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
View 11 Replies
View Related
Nov 14, 2014
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
View 1 Replies
View Related
Jan 29, 2015
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
View 9 Replies
View Related
Sep 19, 2006
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
View 1 Replies
View Related
Mar 10, 2005
hi all,
I want to execute a store procedure but my query returns more than one value. how can I asign value for that. Here is the code. Please help me out.
problem is @aaa where i cannot set the value.
Thanks
Regards
Sudadg
CREATE PROCEDURE movetable
@id int
AS
declare @VType varchar(10)
declare @count int
declare @aaa varchar(50)
set nocount on
create table #temp1(id int identity(1,1),Ac_Code varchar(50))
select count(*) from Journal_Table where Voucher_No=@id
set @count=1
set @count=@@rowcount
while @count <>0
begin
set @aaa=(select Ac_Code from Journal_Table where Voucher_No =@id)
insert into #temp1(Ac_Code) values(@aaa)
set @count=@count-1
end
select * from #temp1
GO
View 3 Replies
View Related
Aug 16, 2006
Dear experts,Again, sorry to bother you again with such a seemingly dumb question,but I'm having some really mysterious results here.ie.Create procedure the_testAsBeginSelect CustomerID
Quote:
View 14 Replies
View Related
Dec 28, 2005
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies
View Related
Sep 26, 2014
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
View 3 Replies
View Related
Aug 23, 2006
i want to grant exec permissions on all of my user stored procedures.
but this process of writing 'grant exec sp_tblAction on public' for
each procedure would take years. how can i write a query that loops
through all stored procedures, checks if it is a user created
procedured, and then grant exec permission for that procedure? can it
be done?
tx, Wilmar
View 11 Replies
View Related
Jul 20, 2005
Hello,Does anyone know of a way to loop thru a SQL table using code in a storedprocedure?I need to go thru each record in a small table and build a string usingvalues from the fields associated with a part number, and I can't find anyway to process each record individually. The string needs to be initializedwith the data associated with the 1st record's part number, and I need tobuild the string until a new part number is incurred. Once a new part numberis found in the table, the string is written to a different table and resetfor this next part number in the table. Need to repeat until all records inthe table have been processed.I use ADO in access 2000 to work thru local recordsets, I just can't findanyway to do this in a stored SQL procedure.Thanks for any suggestions, Eric.
View 1 Replies
View Related
