Hi :
Can i call 2 procs within one task?
I have sp_proc1 ? (and have declared one global variable as input
parameter)
now i have another sp_proc2 which uses same input parameter
but if i write two statements like this within one task, i get an
error
exec sp_proc1 ?
exec sp_proc2 ?
I can solve the problem by writing them in 2 separate tasks, but would
like one task.
Please help..
thanks
Rashika
Dear all!
I have a SSIS packet. I declare a parameter that have scope of packet. I want to pass this parameter into a stored procedure and call this stored procedure from "Execute SQL Task".
Please help me how to call stored procedure with parameter from "Execute SQL Task".
Thank you very much
I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
Thanks
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
I have a group of users that I have given db_datareader permissions to in an SQL Server 2000 database. I am also creating web pages on an intranet site that pulls data from the table. If I just use a select statement to pull the data from the table, the users don’t have a problem. If I use a stored procedure with the exact same sql statement, the users get an error until I grant them execute permissions on the stored procedure.
I have heard that store procedures is the best way to handle data operations but having to make sure I assign execute permissions every time I create a stored procedures can be a pain. The only way I know of to make sure that they had permissions would be to make them a member of db_Owner which is definitely not an option.
Is this just the way it is, or is there some way to automatically grant them execute permissions on stored procedures that are nothing more than select statements and don’t violate db_datareader permissions?
Just wondering if anyone knows of a useful command to assign execute permissions to a batch of stored procs to a user/role. I've got too many stored procs to manually go thru the steps of browsing for them and scrolling thru each one and clicking "execute" for each one.
Also, would like to know if its possible to update a batch of stored procs that begin with a prefix like "spSomething_".
Any info would be helpful! TIA.
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies View Related
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies View RelatedIn the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
oLogFile.WriteAllText("C:MyFile.txt", strValue)
oLogFile.WriteAllText("C:MyFile.txt", rsSQLOutput)
I went through this link that explains how to write XML Result Set into a File, But this doesn't help as it writes in XML format.
Would you please give me a hint of code how I can go upon.
Hi
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
Thanks & Regards
Deepu M.I
Hi all,
I have some problem to need you all help. My problem is i have a Excel Worksheet with VBA coding, in VBA code it have modules,function and sub procedures. after that, i change the VBA coding in add-in file and save as .xla to make the user friendly.
But now, i need to use DTS to automatic to execute the excel file that contain VBA code every week. This is because the VBA in excel cannot automation excute by every week. So, i need use DTS to make it automation. The problem is i don't know how to use the DTS function to call the addin excel to execute? Which the connection and task compenent should i use? Or how do i paste the VBA code in DTS?
DTS is very new for me, are any help can provide me the solution? thanks
Regards,
Andy :confused:
I have a SSIS package contains an "Execute SQL Task". The SQL will raise error or succeed. However, it sounds the package won't pick up the raised error?
Or is it possible to conditional run other control flow items according the the status of SQL task execution?
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
Any guidance or idea about this?
An Execute SQL task takes 1 min to run a statement "insert into Mytable select * from view_using_joins"
Output: 10,225 rows affected.
But a Dataflow task configured to fetch data from the same view_using_joins into MyTable takes hours to do the same.
Could you please explain why is it so ?
Thanks
Subhash Subramanyam
I want to use Navigation to click-through to another report.
However, the source report is an MDX summary report, and the report I'm calling needs the entire Customer MDX tuple as a parameter. (the entire customer tuple is not available in my cube)
The text box has enough information to identify the customer, but not the entire tuple.
I want to pass the text box contents to a SP which returns the MDX string, and pass that to the new report.
I do not see how using another data source can help me accomplish this.
Basically, I am wondering is there a way I can have an expression similar to
=EXECUTE(spX, parm=txtbox.Value)
Thanks In Advance for any help...
Hi,
In my ETL project, l need to extract rawdata using winzip, and the DOS command l use is
c:program filesWinzipwinzip32.exe -min -e c:
awdata est.zip c:
awdata
where -min for minimize and -e for extract, c:
awdata est.zip for source file and c:
awdata for destination. It works fine by using DOS command.
l configure the Execute Process Tasks with the following parameters, i.e.
RequiredFullFileName : TRUE
Executable : c:program filesWinzipwinzip32.exe
Arguments : -min -e
WorkingDirectory : c:program filesWinzip
StandardInputVariable : User::gsRawFile
StandardOutputVariable : User::gsDestDir
Where User::gsRawFile = c:
awdata est.zip and User::gsDestDir = c:
awdata
But it can't work....no error return.
Any idea when l make the mistake?
Thanks.
Regards,
Yong Boon, Lim
Hi
I have created a SSIS package with an FTP call. I have it set to EncryptSensitiveWithPassword.
I can manually run the package from my IDE. Once I build it, create a job, it fails.
If you try to run the package directly from the Stored Packages in Integrations Services it fails with the following error:
Error: The task "FTP Call" cannot run on this edition of Integration Services. It requires a higher level edition.
This is running on our production with a full version.
Does anyone have any suggestions?ideas?
Any incite would be greatly appreciated.
PR
I have a function like below
CREATE FUNCTION [dbo].[UDF_GetCode]Â
(
@TableName NVARCHAR(50)
)
RETURNS NVARCHAR(50)
[code]...
This function is called in insert statement like below. exec sp_executesql N'INSERT INTO Table ([Code], [Name]) VALUES (dbo.UDF_ GetGlobal ConfigCode (''TableName''), @Name)'I am getting following error.Only functions and some extended stored procedures can be executed from within a function.
I am trying to call a web service using the web service task and passing it variables, but even when I set variables to be Strings/any other data type, they always get passed out as objects. The call is then rejected based on the fact that there is no web service that accepts those parameter types. If there is a workaround to this problem, that would be great, otherwise I think I'm going to have to call the web services in a script task. Would someone please give me an example of the steps necessary to call a web service from the script task?
Thank you,
James Mac William
Hi,
I m trying to use the web services task, but when i try to run it i got the following error
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Object reference not set to an instance of an object.. at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
This is probably because i never worked with this task, even so, does anyone knows what might be wrong?
I got a connection a wsdl, i can configure the service, method and variables(i use fixed values), and i configure the output to a variable with the type object(i have tryed string and int)
I even can download the wsdl file, but the error seems to be in the connection
Thanks
hi,
I was just trying to add COM reference but I don't see how.
Let me know any info about this.
TIA
I would like to build a C# program to connect to a remote SQL2005 server.
Then call the server SSIS to run a .exe in the server (The .exe file already exist in the SQL2005 server)
I have refer to the following webpage http://www.codeproject.com/useritems/CallSSISFromCSharp.asp
I can connect to the SQL server by the "LoadFromSqlServer" method with SQL server login A/C.
However, the SSIS failed. I believe it should be due to the window authentication issue. During SSIS execution, the SQL server login A/C does not have the access right to run the .exe file
Could anyone suggest the solution?
Thanks.
Dear all
Please tell me how to call Stored Procedure in a Script Task?
My Stored Procedure have an input parameter is @xmlDoc
Thanks & Rdgds
I've created an SSIS package that contains a Sequence Container with TransactionOption = Required. Within the container, there are a number of Execute Package Task components running in a serial fashion which are responsible for performing "Upserts" to dimension and fact tables on our production server. The destination db configuration is loaded into each of these packages using an XML configuration file. The structure of these "Upsert" packages are nearly identical, while some execute correctly and others fail. Those that fail all provide the same error messages.
These messages appear during Pre-Execute
[Insert new dimension record [1627]] Error: The AcquireConnection method call to the connection manager "DW" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "Insert new dimension record" (1627) failed the pre-execute phase and returned error code 0xC020801C.
... which are followed by
[Connection manager "DW"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
[Connection manager "DW"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
While still in debug mode, I can check the properties of the "DW" connection and successfully test the connection within the packages that fail.
The same packages run successfully when tested outside the container (i.e. no transaction) or when the configuration file is modified to point the "DW" connection to a development version of the db which is running on the same server as the source database.
I have successfully used DTCtester to verify that transactions from source to destination server are working correctly. Also tried setting DelayValidation = True with no change. I have opened a case with Microsoft and am awaiting a reply so I thought I'd throw a post out here to see if anyone else has encountered this and might have a resolution. Here's some more on the environment:
Source Server:
Windows Server 2003 Enterprise Edition SP1
SQL Server 2005 Enterprise Edition SP0
Destination Server:
Windows Server 2003 Enterprise Edition SP1
SQL Server 2000 Enterprise Edition SP3 (clustered)
Thank you in advance for any feedback you might be able to provide.
KS
I am trying to cleanly shutdown a dataflow task, which contains a script component, when RunningPackage.Stop() is called from the SSIS runtime.
I've been going in ever decreasing circles with no success - it looks like the cleanest way to find out whether RunningPackage.Stop() has been called is to call FireQueryCancel(). But I can't find any reference to anything useful in a dataflow task script component that gives me something that implements IDTSComponentEvents. The nearest thing seems to be Me.ComponentMetaData which gives a reference to IDTSComponentMetaData90, but this only has methods for calling FireError, FireInformation, FireProgress, FireWarning, and FireCustomEvent. But no FireQueryCancel.
Is there a way in a script component that I can find out the state of QueryCancel?
Any help would be apprecieated.
I had the SP, I want to call in Script Task , had the Result set data value then I need pop up message box. So how can I call stored procedure result in message box in ssis script task using C#.
and I want to use SSIS -OLEDB connection.
Â
ConnectionManager cm;
System.Data.SqlClient.SqlConnection sqlConn;
System.Data.SqlClient.SqlCommand sqlComm;
cm = Dts.Connections["OLE_TEST_"];
sqlConn = (System.Data.SqlClient.SqlConnection)cm.AcquireConnection(Dts.Transaction);
sqlComm = new System.Data.SqlClient.SqlCommand("Exec dbo.sOp_xx_XXXe_VXX 280", sqlConn);
sqlComm.ExecuteNonQuery();
above code , no message box.
I am trying to execute a SP in the execute SQL task in SSIS 2005..
but I keep getting an error:
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Load_Gs_Modifier_1, Execute SQL Task: Executing the query "exec Load_GS_Modifier_1 ?, ?" failed with the following error: "Could not find stored procedure 'exec Load_GS_Modifier_1 ?, ?'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Load_Gs_Modifier_1
SSIS package "Package.dtsx" finis
I have set up two user parameters: startdate and enddate.. I am not sure what I am doing wrong????
Phil writes "I have a simple question. My scenerio is that I would like to read a column from a table in a SQL database in the Execute SQL Task in SSIS. I would like to assign the value of that column (which is a nvarchar(50) column) to a variable.
The issue I'm having is that unless I make the variable's data type an "object" I am getting the:
"The type of the value being assigned to variable "User::output_location" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object."
error.
I've checked profiler and verified the call is getting to the database. Why can't I populate a nvarchar column to a string data type variable?
Thanks,
Phil"
hi
I have created an Execute SQL Task package and save as package.dtsx
using northwind database
In this package, i have a sql statement: Select * into tblTest from dbo.Orders where OrderID >= ? and OrderID <= ?
I have created 2 package level variables which is OrderID1 and OrderID2, both are Int32 and Value = 0.
I have also used parameter mapping: user:OrderID1,Input, Long, 0, -1
user:OrderID2,Input, Long, 0, -1
I have created a proc to test:
Create Proc spTest
@Value1 int,
@Value2 int
as
Declare @cmd varchar(1000)
set @cmd = 'dtexec /FILE "C:Package.dtsx" /SET Package.Variables[OrderID1].Value;@Value1 /SET Package.Variables[OrderID2].Value;@Value2'
exec master..xp_cmdshell @cmd
When I execute spTest 10249,11029, it gave me "it could set Package.variables[OrderID1].value;@Value1 and so on.
I hope someone could help me with this. Thanks
Hey all
I have created an SQL Task with the following as SQL Statement Source expression:
"INSERT INTO SSISLog (EventDate,StaffNo, EventType, EventDescription)
VALUES (
'@[System::CreationDate]+',
' +@[System::SourceName]+' ,
'OnError',
'+ @[System::ErrorDescription] +'
)
"
And I get the following error:
[Execute SQL Task] Error: Executing the query "INSERT INTO SSISLog (EventDate,StaffNo, EventType, EventDescription) VALUES ( '@[System::CreationDate]+', ' +@[System::SourceName]+' , 'OnError', '+ @[System::ErrorDescription] +' ) " failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any pointers will be highly appreciated. Oh and the purpose of this is to put error logs into the SSISLog table.
Many thanks
Rupa