Dtutil And Spaces In Package Names
Nov 1, 2007
I'm having trouble running a statement like this:
dtutil /DTS MSDB/Budget/BUD_Production - dtsChart of Accounts Budget - Final /En FILE;BUD_Production - dtsChart of Accounts Budget - Final.dtsx;4
I've tried:
dtutil /DTS "MSDB/Budget/BUD_Production - dtsChart of Accounts Budget - Final" /En FILE;"BUD_Production - dtsChart of Accounts Budget - Final.dtsx";4
dtutil /DTS "MSDB/Budget/BUD_Production - dtsChart of Accounts Budget - Final" /En "FILE;BUD_Production - dtsChart of Accounts Budget - Final.dtsx;4"
Any suggestions? I'm no DOS pro, but I can normally get things going.
Thanks
Sam
View 4 Replies
ADVERTISEMENT
Jun 5, 2014
I am trying to deploy a package to a project in my SSIS catalog and am using the following command:
dtutil /FILE C:ChangesReceivedEDI.dtsx /DestS MARSQL12 /COPY DTS;TradingPartnersTradingPartnerReceivedEDI
Where the TradingPartners is the folder name, the TradingPartner is the project name and the ReceivedEDI is the package name.
I am getting an error of:
Error (0x800706BA) while checking for the existence of package "TradingPartners
TradingPartnerReceivedEDI" in the SSIS package store.
Error (0x800706BA) saving package "TradingPartnersTradingPartnerReceivedEDI" to the SSIS package store.
View 5 Replies
View Related
Mar 7, 2000
Hey all,
Hope I can get some help here.
Have a view that has to reference a table in another database on the same server. This isn't the problem. I am just using Databasename..tablename in the from statement. Get the results required in testing.
The problem is that in production the table name has a space character. i.e. 'accounting info' would be the table name. I have not been able to figure out the proper syntax to capture this properly to reference in the from statement.
I have tried enclosing the name in ' ', " ", [], (), {} and just about every combination I can come up with.
Any help in this would be great, and changing the databse name isn't an option at this time.
Thanx,
Chris
View 3 Replies
View Related
Apr 6, 2006
Hi all,
Is it a bad practice to create column names with spaces. like [Last Modified On]?
If yes, y?
View 9 Replies
View Related
Aug 16, 2013
SQL 2012 - Convert BIDS project and DTUTIL cannot load the package I just converted a really simple 2008 BIDS project to 2012 and 2012 dtutil will not load it. Tried 32 bit and 64 bit dtutil.
Get the following error message.
'count not load package "c: empSSISPackage.dtsx" because of error 0x80131534. Description: the package failed to load due to error 0x80131534 "<null>". This occurs when CPackage::LoadfromXML fails.
I can Import the package in SQL Manager, and I can deploy it using the manifest and the deployment wizard. But DTUTIL chokes on it. It is the dtsx right from 2012 Bids build.
dtutil /DestS ficertx2x /FILE C:empRelease2012CreateSSISPackage.dtsx /COPY SQL;/MYTestPackage /QUIET
View 9 Replies
View Related
Dec 16, 2005
I am attempting to how to truncate list of tables using STP. That is decalre a cursor for a list table names and then to truncate the table names one by one.
The code below shows what I want to achieve. I want to truncate all the tables with names beginning with ZZ but this is failing. I have tried using both delete and truncate.
Is it possible and what do I need to do?
-- Code
SET QUOTED_IDENTIFIER Off
GO
SET ANSI_NULLS ON
GO
create PROCEDURE dbo.Empty_ZZ
AS
DECLARE @tablename sysname
DECLARE @localname varchar(50)
DECLARE ZZtablenames_cursor CURSOR FOR
select [name]
from sysobjects
WHERE [xtype] = 'U'
and name like 'ZZ %'
OPEN ZZtablenames_cursor
FETCH NEXT FROM ZZtablenames_cursor
into @tablename
WHILE @@FETCH_STATUS = 0
BEGIN
set @localname = '[' + @tablename + ']'
TRUNCATE + @localname
FETCH NEXT FROM ZZtablenames_cursor
END
CLOSE ZZtablenames_cursor
DEALLOCATE ZZtablenames_cursor
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
View 4 Replies
View Related
Dec 31, 2004
Afternoon,
I've got this security database that needs to create a login name using first initial and 7 characters of the lastname. No problem.
I wrote this:
select
CASE WHEN LastName like '%.%' then
LEFT(FirstName, 1)+left(replace(LastName,'.',''),7)
else
LEFT(FirstName, 1)+ LEFT(LastName,7)
end as UserID
from Security.dbo.tblUserInformation
The replace and case functions I used to get rid of the '.' Like the name St. Clair now I get "GSt Clai" I need it to also get rid of the space but am stuck. Any thoughts would be appreciated.
Thanks
Laura
View 2 Replies
View Related
Aug 29, 2014
I am trying to debug a procedure which is timing out, not in every case, but in some cases.
During my perusals, I note that there seems to be a stray space in the 3rd line of following fragment of an UPDATE statement in the procedure:
...
FROM dbo.LoadMedicationsGP LMGP
INNER JOIN dbo.Patient P ON LMGP.PatientId = P.PatientId
INNER JOIN dbo. PatientMonths PM ON P.PatientKey = PM.PatientKey
AND LMGP.DatePeriodKey = PM.DatePeriodKey
...
SSMS seems to parse the statement perfectly OK, but to me it looks as if it ought to be wrong.
I suspect that the space has no material effect, but I just wanted some confirmation one way or the other.
View 4 Replies
View Related
Mar 1, 2015
I am designing a package to export staging tables into a flat file.The names of the tables will be: TableAStaging_YYYYMM and TableBStaging_YYYYMM. As you can see the names of the tables will be changing each month.
The flat files will have similar naming: C:MyPathFlatFileTableAStaging__YYYYMM and C:MyPathFlatFileTableAStaging__YYYYMM.I want to run the package as an sql job in two steps, one for each table.I need to dynamically pass the table names and file names (together with the path) to the IS package.
View 1 Replies
View Related
Jun 29, 2007
Using the "set values" tab, I am trying to set the values of package variables to strings that contain spaces and/or dashes. If I run the package using the integrations services server, it runs perfectly. If I schedule the package on SQL Server agent, I get the following error.
"Executed as user: GBPSQLServer. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Option "-restofstring" is not valid. The command line parameters are invalid. The step failed."
Looking at the command line generated by the SQL Agent interface, the value is quoted using double quotes like this:
/SQL "PackageName" /SERVER SQL1 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /SET "Package.Variables[LogFolder].Value";"\remoteservernameinetpub he-restofstring
estofstring" /REPORTING E
It seems that the command line parser is not recognising the quotes, or maybe the slashes are throwing it off, or sql server agent is doing something funny to the command line before it executes it.
Anybody got any ideas?
View 1 Replies
View Related
Jul 20, 2005
I am attempting to export data on a daily basis via DTS to an XLspreadsheet. I would either like to: a) have a separate worksheet inthe spreadsheet for each export or b) a completely differentspreadsheet for each export. Whenever I attempt to use a variable asthe name of my table in the DTS package, it will not let me.Constructing a string and attempting to execute it also fails,although both of these work in query analyzer. Any advice?Peter
View 1 Replies
View Related
Jul 17, 2006
hi,
i would like to know how to get the package configuration names and values when a package is set to use package configuration. thanks.
View 1 Replies
View Related
Oct 24, 2006
I am using a script to copy a number of packages (50+) from my desktop computer (file system) to a remote server (MSDB). The script works fine, but I can never get through the entire script without it hanging up. Some times only 3-4 packages get copied, sometimes a lot more. If I close the windows cmd window and restart at the point it hung, it continues, but usually hangs up again. If you repeat this 2 or 3 times, it eventually gets all of the packages copied. It does not always hang at the same point. I have tried doing the copies with "quiet" mode - overwriting the existing packages and I have tried first deleting the packages, then copying - doesn't make a difference. I have also tried moving the packages to a couple of different installations of SQL Server 2005 using the script - the remote one and the local one on my desktop - same thing on both.
If I have the script echo a message just after each copy, the message just after the last successful copy never appears (and I know the copy is successful, because I deleted all the packages first and have checked that the package is there after the script hangs).
The copy command I am using look like this:
dtutil /FILE %1 /Decrypt %3 /Encrypt SQL;%~n1;2;%3 /DestServer %4 /DestUser admincis /DestPassword %2 /quiet
ECHO Done deploying package %~n1
%1 is the file spec of the ".dtsx" file to be copied
%2 is the password of the user account on the server
%3 is the encryption password (same one used on both ends)
%4 is the name of the server being copied to
Any ideas???
Jane Gaby
View 1 Replies
View Related
Jan 29, 2007
hi group,
i have to check whether SSIS package is present in MSDB or not.
I am using DTUTIL for this perpose . Command goes like this.
dtutil /SQL Package_for_testing /Exists
Error(0xC0014014) while checking for the existence of package "Package_for_testing" on SQL server
this is giving the error "The specified package does not exist.
Description: The ExistsOnSQLServer method has encountered OLE DB error code 0x80
004005 (Login timeout expired). The SQL statement issued has failed.
Source:"
But the package is there in MSDB when i checked manually.
I want to know what this error signify? and how i can solve it.
With advance thanks
Srinivasa Mahendrakar
View 2 Replies
View Related
Jan 27, 2006
Hi,
I have a 64 bit Itanium SQL Cluster that I'm trying to set up. The database engine seems fine, but I'm trying to install some SSIS packages using dtUtil and I keep getting a connection error. The error is as follows
"Login timeout expired
An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default seetings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [2}. (Microsoft SQL Native Client)"
Also, in Management studio, I can make a connection to my SSIS Server, but when I go down to the MSDB folder to look at packages I get the same connection error.
I think I was able to deploy a package using the Deployment Manifest created by VS, but I'm not sure because I can't see the package in Mgt Studio.
It almost seems like it may be related to the cluster. I'm connected in to one of the Servers using Terminal Services. But I am trying to connect to the Cluster name in Mgt Studio.
Any thoughts/ideas/Solutions greatly appreciated.
Thanks.
Andy
View 5 Replies
View Related
May 14, 2007
Hi,
Im loading the packages with a dutil-batch from the file-system into the sqlserver.
All the packages have xml-configuration-file.
for %%f in (*.dtsx) do dtutil /FILE %%f /COPY SQL;%%~nf /DestServer server /QUIET
When I try to run the packages in the sqlserver environment there is no configuration file found.
Is there a possibility to transfer also the link to the xml-configuration-file xml-configuration-file with dtutil?
Thanks Gerd
View 5 Replies
View Related
Aug 29, 2006
how can i create a folder in the integration services-stored packages-MSDB folder using dtutil command line utility.
I could create a folder within a folder inside MSDB using
dtutil /FC SQ; est;temp
but not in the MSDB folder.
Thanks &Regards,
Vivek S
View 1 Replies
View Related
Sep 29, 2006
Hi,
Our company wants to allow our customers the ability to import employee data. Each customer's employee data changes depending on things like organisation structure etc. so the format of the data to be imported needs to change. We can do a lot of this with dynamic SQL, but are looking at moving it to SSIS as we think it will save us a lot of pain later on and for other features in SSIS.
We're stuck at a fairly early part of the process as we don't know how to dynamically import our spreadsheet. So far our best idea is to connect to the excel connection as the only step in the data task and then to use a script task on the control task, write code to connect to the excel source (set the excel source to not treat the first row as headers so we can do a 'select top 1 *...' ) then create a dynamic sql command to create the table.
Once this is done we would then have another data task that actually puts the data into the newly created table. This all sounds very difficult though. What are the options for doing what we want to do... have a feeling that we're missing something basic.
Any help appreciated,
TIA, Anthony.
View 4 Replies
View Related
Jan 18, 2006
Hello,
I'm wondering how to use the dtUtil command to deploy an ssis package but also include any of the miscellaneous files, such as some dtsconfig files. I'd like to be able to use the dtUtil command to specify where to put any "dependencies" that I have. If I create a deployment utility from BI Studio, I have the option on the third screen to choose the folder for dependencies, how come I don't see any parameters for that on the dtUtil command? Is it possible, or do I HAVE to deploy using the deployment utility created for me by BI Studio?
Thanks in advance,
Andy
View 1 Replies
View Related
Nov 22, 2006
1) We are migrating data from SQL Server 2000 to 2005 DB.
2) We are developing SSIS packages in client, build, deploy and install and copying to SQL Server 2005 server to execute for migration.
3) For this we encrypt all packages with password, then decrypt all while executing in a batch file using dtexec. This works fine.
4) What does not work is executing a master execute task in which are individual execute tasks. This is so since the other packages are still encrypted.
5) We decrypted them separately first using dtutil using Decrypt and Copy/Move option but while executing error is thrown that these other packages are still protected by password.
6) Do we need to decrypt, then encrypt using default package protection level and then decrypt again.
7) How exactly to just execute a master package when packages are developed on client.
View 1 Replies
View Related
Aug 11, 2015
As part if a recent requirement I have to export Chinese/Singaporean names in a CSV file. The data in the tables is a NVARCHAR(256).
I am using a FlatFile Connection manager where all the present columns from the table are exported as NVARCHARs. My understanding was that the Chinese/Singaporean names would blend seamlessly with NVARCHARs in place. But, they get garbled when pushed to the CSV.
Here is the connection manager setup
There are a lot of suggestions of fixing this by copying/pasting to a notepad file and changing the formatting... But I cant do that since the file is generated using a schedules SSIS package. How can I tweak the process to fix the issue?
View 4 Replies
View Related
Jan 22, 2004
Hi
I was wondering if anyone has an idea of how we could find the table names and column names of the tables in our Sql server database at runtime/dynamically given our connection string? Please let me know.
Thanks.
View 5 Replies
View Related
Jan 31, 2008
I'm going to be setting up DB mirroring between two SQL Server 2005 boxes. Since these are on two different servers, can the instance names be the same? Is there any reason NOT to do so if the mirror server is going to be used exclusively for DB mirroring?
For example: if the my primary DB is located on SERVER1INSTANCE1, can the mirror be SERVER2INSTANCE1 or do the instance names have to be different even though they're on different boxes.
Thanks!
View 4 Replies
View Related
Jan 21, 2004
I'm trying to do an update query that looks like this:
UPDATE
PAEMPLOYEE
SET PAEMPLOYEE.LOCAT_CODE = EMPLOYEE.PROCESS_LEVEL
FROM
PAEMPLOYEE A
JOIN EMPLOYEE B ON A.EMPLOYEE = B.EMPLOYEE
It's erroring out on the Employee prefix B.EMPLOYEE saying:
..."does not match with a table name or alias name used in the query"
Is it wrong or will it cause problems to have a field name the same as the table name?
View 5 Replies
View Related
Aug 3, 2006
Hello there. I'm trying to populate a drop down box with a list of all available instances of SQL server (express or not) available on a network. To list all instances I'm using EnumAvailableServers() in SmoApplication.
The issue is that the Instance column in the returned data table is always empty, and both the Name and the Server columns contain the same string -- the name of the computer the SQL server is installed. Locally I have SSE installed, the instance name is <computer_name>SQLEXPRESS, however, using Smo I can't seem to get to the either full instance name or just the instance name. I can't assume SQLEXPRESS, since there may be more than one installed.
Alternately I used EnumRegisteredServers() in SmoApplication.SqlServerRegistrations and that, while returning instance information (can be retrieved from the RegisteredServer in the returned collection), doesn't always return the remote SQL servers in the list.
Any idea how can this be done? Maybe I'm going at it the wrong way, maybe there's another class / method I need to use to retrieve all instances?
Thank you
View 6 Replies
View Related
Sep 24, 2001
Please how can remove spaces on a date field and a text field. THanks.
View 1 Replies
View Related
Mar 4, 2008
hii all,can any one help me to get this information.
i am using sql server 2000 and i want to know:
1- all names of servers
2- all database names (catalogs) at specific server and only which the user created .
3- user name and password for each server.
thanks.
View 2 Replies
View Related
Nov 19, 2007
i collected the users information without using any trim fucntion(i have implemented now)
but the data which has been already posted into my server has text with some white spaces at the beginning of data
now how to remove this white spaces in this column in online server data.
the data is something like this
mycolumn
data
data
data
data
so how to remove white spaces in the above column
View 3 Replies
View Related
Apr 22, 2008
Hi
i have 1 query please guide me,
SELECT P.ProjectName, REPLACE(SPACE(TU.TaskOutlineLevel), ' ', '__') AS dash,TU.TASKISSUMMARY AS TASKSUMMARY,
here i want to add BLANKS but not working so i have to show add spaces using __ here any idea i can add SPACES or ' ' here.
please let me know if any. basically i want to align the data in my GRIDVIEW
Thanks in advance
Parth
View 4 Replies
View Related
Apr 12, 2006
How can you remove spaces in the middle of a string, RTRIM and LTRIM does not work
View 1 Replies
View Related
Jan 8, 2002
Creating a text file using DTS, is there a function/way to take out white
spaces from columns. Example:
'1234 ','567 ' would come in text as
'1234','567'
Thanks in advance.
View 2 Replies
View Related
Jan 7, 2003
Hi,
I am building my insert statements dynamically and am finding that there are spaces after certain integer fields.
example Insert Table A (col1, col2, col3)
values (1 ,'2',3 )
If col1 and col3 are integer fields, is there any affect to either how the value is stored or how it will be retrieved when the table is used in a join. By inspecting the values in the table, it seems fine. Do I need to worry?
Thanks,
Jim
View 1 Replies
View Related
