Duplicates Of Part Num To Be Summed And Add Another Column Called User

Aug 25, 2015

There are 3 columns in the result set - part num, Qty and MO num. Each MO num has part numbers.So there might be same part numbers in MO's. Each part num has qty. So, if I group by part num, I get Qty.

1.There are duplicates of part.num and I want to remove duplicates and add quantities of those duplicates into one single quantity. For example, xxxx is a part num, then xxxx=1,xxxx=3,xxxx=5. I want xxxx=9. I want to sum those. Another question is, each MO has a user. I want to join user and MO num in MO.

Heres the code,

part.num , (woitem.qtytarget/wo.qtytarget) AS woitemqty,
(SELECT LIST(wo.num, ',') FROM wo INNER JOIN moitem ON wo.moitemid = moitem.id WHERE moitem.moid = mo.id) AS wonums FROM mo INNER JOIN moitem ON mo.id = moitem.moid
LEFT JOIN wo ON moitem.id = wo.moitemid
LEFT JOIN woitem ON wo.id = woitem.woid AND woitem.typeid = 10 LEFT JOIN (Select sum(woitem.qtytarget) as labor, woitem.woid, uom.code as uom from woitem JOIN part on woitem.partid = part.id and part.typeid = 21 JOIN uom on woitem.uomid = uom.id group by 2,3) as labor on wo.id = labor.woid LEFT JOIN part ON woitem.partid = part.id

View 1 Replies


ADVERTISEMENT

SQL Server 2014 :: Duplicates Of Part-number To Be Summed And Add Another Column Called User?

Aug 25, 2015

There are 3 columns in the result set - part num, Qty and MO num. Each MO num has part numbers.So there might be same part numbers in MO's. Each part num has qty. So, if I group by part num, I get Qty.

1.There are duplicates of part.num and I want to remove duplicates and add quantities of those duplicates into one single quantity. For example, xxxx is a part num, then xxxx=1,xxxx=3,xxxx=5. I want xxxx=9. I want to sum those. Another question is, each MO has a user. I want to join user and MO num in MO.

Heres the code,

part.num , (woitem.qtytarget/wo.qtytarget) AS woitemqty,
(SELECT LIST(wo.num, ',') FROM wo INNER JOIN moitem ON wo.moitemid = moitem.id WHERE moitem.moid = mo.id) AS wonums FROM mo INNER JOIN moitem ON mo.id = moitem.moid
LEFT JOIN wo ON moitem.id = wo.moitemid
LEFT JOIN woitem ON wo.id = woitem.woid AND woitem.typeid = 10 LEFT JOIN (Select sum(woitem.qtytarget) as labor, woitem.woid, uom.code as uom from woitem JOIN part on woitem.partid = part.id and part.typeid = 21 JOIN uom on woitem.uomid = uom.id group by 2,3) as labor on wo.id = labor.woid LEFT JOIN part ON woitem.partid = part.id

View 1 Replies View Related

SQL Server 2012 :: Duplicate Of Part Num To Be Summed And Add Another Column Called User

Aug 25, 2015

There are 3 columns in the result set - part num, Qty and MO num. Each MO num has part numbers.So there might be same part numbers in MO's. Each part num has qty. So, if I group by part num, I get Qty.

1.There are duplicates of part.num and I want to remove duplicates and add quantities of those duplicates into one single quantity. For example, xxxx is a part num, then xxxx=1,xxxx=3,xxxx=5. I want xxxx=9. I want to sum those. Another question is, each MO has a user. I want to join user and MO num in MO.

Heres the code,

part.num , (woitem.qtytarget/wo.qtytarget) AS woitemqty,

(SELECT LIST(wo.num, ',') FROM wo INNER JOIN moitem ON wo.moitemid = moitem.id WHERE moitem.moid = mo.id) AS wonums FROM mo INNER JOIN moitem ON mo.id = moitem.moid

LEFT JOIN wo ON moitem.id = wo.moitemid

LEFT JOIN woitem ON wo.id = woitem.woid AND woitem.typeid = 10 LEFT JOIN (Select sum(woitem.qtytarget) as labor, woitem.woid, uom.code as uom from woitem JOIN part on woitem.partid = part.id and part.typeid = 21 JOIN uom on woitem.uomid = uom.id group by 2,3) as labor on wo.id = labor.woid LEFT JOIN part ON woitem.partid = part.id

View 1 Replies View Related

Transact SQL :: Calculate DateTime Column By Merging Values From Date Column And Only Time Part Of DateTime Column?

Aug 3, 2015

How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?

View 5 Replies View Related

SQL Server 2008 :: Display A Column Alias As Part Of The Result Set Column Labels?

Feb 26, 2015

Is there a way to display a column alias as part of the result set column labels?

View 9 Replies View Related

Using User Input As Part Of A SELECT Statement

Jun 16, 2004

I know this is an easy one and I know I've read it somewhere, but I can't seem to write the correct format to run correctly. I am trying to build a SELECT statement base on the selected values of a dropdown list on a webform. The selected values will be part of the Table name.. ("client_info" & location_option.selecteditem.value) Can someone show me the correct syntax for adding a form variable into a SELECT statement? Thanks

View 1 Replies View Related

Deleting Duplicates Which Occur In Only One Column

Aug 9, 2006

Hello all. I have a table with two coulmns CODE and DESCRITPION. Can anyone suggest how i can go about deleteing the entire record where two or more codes are the same?

Thanks.

View 4 Replies View Related

SQL Server 2014 :: Update Duplicates In A Column

Aug 13, 2015

How do I append an accumulating number to duplicates in a column? I would prefer to update the table

for example

Name
John
John
Tom
Bob
Bob
Bob
Mike

to look like

Name
John
John1
Tom
Bob
Bob1
Bob2
Mike

View 1 Replies View Related

How To Bring Back A List Of Duplicates From A Column

Jul 20, 2005

I have a column that has 75 values, 50 are unique/25 are duplicates. Ineed to be able to bring back a list of the duplicates, listing allrows even if more than two have the same value. I need to be able todo this using t-sql.Thanks,Tim

View 5 Replies View Related

Update Part Of A Column Only

Sep 18, 2004

Newbie here.

How would I do the following update?

I have over 100,000 rows and want to knock the first two characters off one of the columns in each row.

i.e. currently have

pcdocsvariousvarious

and want this to read

docsvariousvarious

I just need to remove the first two characters "pc".

View 6 Replies View Related

Removing Duplicates Records From A Column Populate Randomly?

Jan 26, 2015

I ran this query to populate a field with random numbers but it keeps populating with some duplicate records. how I can remove the duplicates?

UPDATE APRFIL
SET ALTATH = CONVERT(int, RAND(CHECKSUM(NEWID())) * 10000);

Below are sample output that I need the dupes not show. The table already exist and its sql 2008

155957
155957
155968
155974
155976
15599
155990
155997
155997
156005
156008

View 2 Replies View Related

SQL Server 2008 :: How To Find Duplicates In A Table As Per Particular Column

Nov 2, 2015

I am having a main table and temptable.

Every sunday, new data will be loaded from temptable to main table. I have to make sure that, duplicates does not get loaded from temptable to maintable.

For example, if last sunday a record gets loaded from temp to main. If this sunday also the same record is present then it means that is a duplicate.

The duplicate is decided on below scenario

select 'CodeChanges: ', count(*) from CodeChanges a, CodeChanges_Temp b
where a.AccountNumber = b.AccountNumber and
a.HexaNumber = b.HexaNumber and
a.HexaEffDate = b.HexaEffDate and
a.HexaId = b.HexaId and

[Code] ...

Yesterday (Sunday) , data from temp got loaded onto maintable but with duplicates.

There is a log which just displays number of duplicates.

Yesterday the log displayed 8 duplicates found. I need to find out the 8 duplicates which got loaded yesterday and delete it off from main table.

There is a column in both tables which is 'creation date and time'. Every Sunday when the load happens this column will have that day's date .

Now i need to find out what are all the duplicates which got loaded on this sunday.

The total rows in temp table is : 363
No of duplicates present is : 8

I used below query to find out the duplicates but it is returning all the 363 rows from the maintable instead of the 8 duplicates.

Select 'CodeChanges: ', * from CodeChanges a where
exists
( Select 1 from CodeChanges_Temp b where
a.HexaNumber = b.HexaNumber and
a.HexaEffDate = b.HexaEffDate and

[Code] ...

Need finding the duplicate records which has creation date time as '2015-11-01 00:00:00.000' and all the above columns mentioned in the query matches.

Example

Few colums only metioned below

creationdateandtime HexaNumber HexaCode
1. 1987-10-01 00:00:00.000 5 3
2. 2015-11-01 00:00:00.000 5 3

So here the second record is duplicate. This is what I am trying to find.

View 4 Replies View Related

Need To Find Instances Of Duplicates Within A Column; Joining 2 Tables.

Aug 22, 2007

My basic situation is this - I ONLY want duplicates, so the oppositeof DISTINCT:I have two tables. Ordinarily, Table1ColumnA corresponds in a one toone ratio with Table2ColumnB through a shared variable. So if I queryTableB using the shared variable, there really should only be onrecord returned. In essence, if I run this and return TWO rows, it isvery bad:select * from TableB where SharedVariable = 1234I know how to join the tables on a single record to see if this is thecase with one record, but I need to find out how many, among possiblymillions of records this affects.Every record in Table1ColumnA (and also the shared variable) will beunique. There is another column in Table1 (I'll call itTable1ColumnC) that will be duplicated if the record in Table2 is aduplicate, so I am trying to use that to filter my results in Table1.I am looking to see how many from Table1 map to DUPLICATE instances inTable2.I need to be able to say, in effect, "how many unique records inTable1ColumnA that have a duplicate in Table1ColumnC also have aduplicate in Table2ColumnB?"Thanks if anyone can help!-- aknoch

View 1 Replies View Related

Check Constraint On Part Of Column

Jun 6, 2007

Can anyone please tell me how can i create a uniqueness contraint on part of column and index that part too. i.e.
consider the following table.

table A

Col1
furadfaf
fsradfasd
dddafadsf
hjfhdfjakdj


now i want only left three characters of the Col1 to be unique and indexed.

any idea ??????

View 5 Replies View Related

Return Only Part Of The Data In A Column?

Nov 20, 2012

I have a table with 2 columns ItemID and ReturnDesc. A sample of the data is:

ItemId ReturnDesc
1244 Did not want
1244 Wrong color
3426 Return came with ticket 426
3571 Ticket 584 was not included

The only information I want to have returned is the number following the text 'ticket'. How do I do this?

View 3 Replies View Related

Select And Display Part Of Column

Dec 5, 2013

How do I only display a part of data from the column ?

Lets say emp_id is E3456 and all i want to display is 3456 without that E?

View 2 Replies View Related

SELECT Part Of A String In A Column

Dec 23, 2013

I'm trying to form a query that will select part of a result.I'm trying to take out the ending of results that end in '-PR'.

Example: The original result is 'Jbbx32-PR'. I want to select it as 'Jbbx32'.

View 5 Replies View Related

How To Select Partial Part Of Column

Feb 20, 2014

I have a PURCHASE ORDER NUMBER which is character 24 pos. and I only want to select in the query those which start with

'101' from 1 to 3 = '101'

How to do this in the query?

View 5 Replies View Related

Duplicates Again! UNION Join - Remove Records With Column Diff.

Sep 9, 2004

Hello All,

We all were new at one point.... any help is appreciated.

Objective:

Combining two 49,000 row tables and remove records where there is only 1 column difference. (keeping the specified column value removing the one with a blank.)

Reason:

I have 2 people going through a list, coding a specific column with a single letter value. They both have different progress on each sheet. Hence I am trying to UNION them and have a result of their combined efforts without duplicates.

My progress/where I'm stuck:

Here is my first query/union:

SELECT * FROM [Eds table]
UNION SELECT * FROM [Vickis table];

As shown above, I have unioned these 2 tables and my results removed th obvious whole record duplicates, but since 1 column is different on these, a union without criteria considers them unique.....

an example of duplicates that I must remove are as follows:

142301 - Product 5000 - 150# - S (Keep)
142031 - Product 5000 - 150# - "" <--- Blank (Remove)

I am trying to run another query on my first query results so I don't mess my first query up. Here it is:

SELECT DISTINCT [Prod #], [Prod Name], [Prod Description], [Product Type]
FROM [Combined Tables]
WHERE [Product Type]<>" ";


Please Help! Thank you in advance.

--------------------

5 minutes away from pulling my last one!

BaldNAskewed

View 7 Replies View Related

SQL 2012 :: How To Check Existing Values In A Column For Duplicates Before Inserting

Aug 12, 2014

I have the following objective:

1. I want to check a column to see if there are values (to Eliminate dups)
2. Once checked the values in a column, if not found insert the new value

Here is my code for this:

ALTER TRIGGER DUPLICATES ON AMGR_User_Fields_Tbl
-- When inserting or updating
AFTER INSERT, UPDATE AS

-- Declare the variables
DECLARE @AN varchar(200)

[Code] ....

View 1 Replies View Related

Reporting Services :: Remove Duplicates Based On A Specific Column

Jun 22, 2015

I have some duplicate values for my query results, about 200 duplicates out of 30000 rows.  Of these 200 duplicates I want to keep the ones that have a higher value for... 'UpdatedBatchID'. 

SELECT
    IR.Id                            as 'ID'
  , CAST(IR.Priority as varchar)    as 'Priority'
  , IRSupportGroupDN.DisplayName    as 'Support Group'
  , DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),IR.CreatedDate)    as 'Created Date'
  , DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),IR.ResolvedDate)    as 'Resolved Date'
  , SLOConfig.DisplayName            as 'SLO'
  , DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),SLOFact.TargetEndDate)    as 'SLO Target'
  , SLOStatusDN.DisplayName            as 'SLO Status'
  , SLOMetric.DisplayName            as 'SLO Metric'
  , SLOFact.UpdatedBatchId            as 'UpdatedBatchID'

View 11 Replies View Related

Extrach Part Of A Column String Into Another Field

Feb 6, 2001

hi, I have a field named city_state that contains city and state together (Warren, OH) in the same field. I need to create two seperate columns one city, another state. how can I extract the state out of the city_state column and have two different column.
thanks

Ahmed

View 2 Replies View Related

The Multi-part Identifier (Column Name) Could Not Be Bound

Jan 19, 2013

Which the column name is the c.Documenttype

here is my T-sql code..

SELECT [Hourly]
,count(case when C.Documenttype=1 THEN '1' END) as EDI
,count(case when C.Documenttype=2 THEN '2' END) as SI
,count(case when C.Documenttype=1 THEN '1' END) + count(case when C.Documenttype=2 THEN '2' END) as GrandTotal

[Code] ....

View 2 Replies View Related

Retrieve Part Of Address - Column Is Varchar?

Mar 25, 2015

I want to just retrieve the numbers left of the space in this address column what can I use? The Address column is Varchar.

Address:
6501 Red Hook Place #201
32 Orchard St
1 Hardy Rd ste 210
379 E Center St.
170 Bridge St
399 Interpace Pkwy
1800 Valley Rd
2210 Harding Hwy
41 Maple Ct

Expected Results:

Address
6501
32
1
379
170
399
1800
2210
41

I tried using this:

Left([ADDRESS], Charindex(' ',[ADDRESS] - 1)) as 'Address'

But i received an error:

Conversion failed when converting the nvarchar value '6501 Red Hook Place #201' to data type int.

View 2 Replies View Related

How To Extract Part Of A String In Column Results

Jul 21, 2015

I want to extract a number within a column results, that is the number between the first two commas

Example:
select path from tablea
results:
1158285,1158286,1158287,1158288,1158289
1158288,1158289,1158290,1158291,1158292
....

How to extract the second number(between the first two commas) from the above results?

The output should be

1158286
1158289

View 2 Replies View Related

Alter Table Column, Which Is Part Of Foreign Key

Apr 1, 2006

In MS SQL Server, I have the following tables with some data in it.create table table1 (column1 varchar(32),column2 int not null,column10 varchar(255),.....primary key (column1, column2),);create table table2 (column1 varchar(32),column2 int not null,column20 varchar(255) not null,....foreign key (column1, column2) references table1(column1, column2));Now, I need to change the all column types from varchar to nvarchar tosupport internationalized character set.I am able to do so, for columns column10 in table1 and column20 oftable2 without any problems by using command:"alter table table1 alter column column10 nvarchar(255);"But, when I try the similar thing for column1 of table1/table2, amgetting one error message saying like: "ALTER TABLE ALTER COLUMN failedbecause one or more objects access this column". I guess, this iscoming because of foreign key relationship between the tables.NOTE: While defining the table2, for foreign key I have not specifiedanything like "on update cascase" ...etc.How can I resolve this issue? Any suggestions/solutions are reallyhelpful to me. Thanks in advance.

View 2 Replies View Related

Need Some Help Writing Part Of The Derived Column Component

Aug 29, 2006

Hey. I need to see if "/" is present in the column11 and if it's then just pass it as is or do the substring part. How do I get this to work? It's giving me an error. This is for a TimeDate column. I can get a 20060813 or 2006/08/13.I'm using the below and it's giving me an error saying that It should be DT_BOOL and I'm trying to return DT_I4.



findstring(Column11,"/",2) ? Column11 : SUBSTRING(TRIM(Column11),1,4) + "-" + SUBSTRING(TRIM(Column11),5,2) + "-" + SUBSTRING(TRIM(Column11),7,2)

Thank you



Tej

View 4 Replies View Related

T-SQL (SS2K8) :: Rank Duplicates But Only Rows Involved In Duplicates?

Oct 22, 2014

I have a table with 22 million Business records. I can see that there are duplicates when I group by BusinessName and Address and Phone. I'd like to place only the duplicates into a table, with a ranking, oldest business key gets a ranking of 1.

As a bonus I'd like each group to have a distinct group name (although not necessary, just want to know how to do this)

Later after I run more verifications to make sure these are not referenced elsewhere I'll delete everything with a matchRank > 1 out of the main Business table.

DROP TABLE [dbo].[TestBusiness];
GO
CREATE TABLE [dbo].[TestBusiness](
[Business_pk] INT IDENTITY(1,1) NOT NULL,
[BusinessName] VARCHAR (200) NOT NULL,
[Address] VARCHAR(MAX) NOT NULL,

[code]....

View 9 Replies View Related

Transact SQL :: Extract ID And Specific Part Of A String From Column

Jun 10, 2015

I have to extract a specific part of a string from a column in a sql server table. Following are the details and I have given the sample table and the sample strings.

I have 2 columns in my table [dbo].[StringExtract] (Id, MyString)

The row sample looks like the following

I have to extract the Id and a part of the column from mystring.

Id      MyString
1      ABC|^~&|BNAME|CLIENT1||CLIENT1|20110609233558||BIC^A27|5014589635|K|8.1|
ABC1|^~&|BNAME1|CLIENT1||CLIENT1|20110609233558||CTP^A27|5014589635|I|7.1|
DEF||5148956598||||Apprised|Bfunction1||15|LMP|^^^201106101330|
alloys3^ally^crimson^L||||alloys3^ally^crimson^L||||alloys3^ally^crimson^L|||||Apprised|

[Code] ....

The part I want to extract is in the line "ZZZ" and the string part that i want to extract is between the 5th and 6th pipes (|). So my output looks like the following

Id      DesiredString
1      Extracts^This^String1
2      Extracts^This^String2
3      Extracts^This^String3

Is there a way to extract this either using TSQL or SSIS.

IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[StringExtract]') AND type in (N'U'))
DROP TABLE [dbo].[StringExtract]
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[StringExtract]') AND type in (N'U'))
BEGIN
CREATE TABLE [dbo].[StringExtract](
[Id] [int] NULL,

[Code] ....

View 4 Replies View Related

Conditionally Adding A Column To My Custom Component (part 2)

Mar 13, 2006

A month or so ago I instigated this thread- http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=243117&SiteID=1 which talked about how to conditionally add a column to my component depending on the value of a custom property. If the custom property is TRUE then the column should appear in the output (and vice versa).

Bob Bojanic said I should use the SetComponentProperty() method to do this and that is working pretty well. However, it bothers me that SetComponentProperty() could be called, the column will then be added, and then the package developer could press 'Cancel'. In this instance the value of my custom property would be inconsistent with the presence of the extra column.

How do you get around that?

Thanks

Jamie



View 3 Replies View Related

Transact SQL :: Updating Date Part In Datetime Column

Sep 18, 2015

I need to set only the date part of tblEventStaffRequired.StartTime to tblEvents.EventDate while maintaining the time part in tblEventStaffRequired.StartTime.

UPDATE tblEventStaffRequired
SET StartTime = <expression here>
FROM tblEvents INNER JOIN
tblEventStaffRequired ON tblEvents.ID = tblEventStaffRequired.EventID

View 4 Replies View Related

How Do I Return Results Using An Entire Column As Part Of The Search Parameter

Nov 10, 2007

Hi, Could you tell me if this is possible? How do I return results using an entire column as part of the search parameter? I need to do this in the sql rather than selecting the contents and iterating through it as it would take too long.

eg.
CREATE TABLE [dbo].[tPopupKeywords](
[id] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[title] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[description] [nvarchar](2000) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]


INSERT INTO dbo.tPopupKeywords(title, description)
SELECT 'check', 'desc' UNION ALL
SELECT 'for', 'desc' UNION ALL
SELECT 'keywords', 'desc'


select dbo.tpopupkeywords.title
where 'This is an example of a passed in string to check if any keywords are returned.'
LIKE '% ' + dbo.tpopupkeywords.title + ' %' --Does this bit need to do a select??

expected results.....:

check
keywords

View 1 Replies View Related

T-SQL And Visual Basic 2005 Codes That Execute A User-Defined Stored Procedure In Management Studio Express (Part 2)

Jan 23, 2008

Hi Jonathan Kehayias, Thanks for your valuable response.

I had a hard time to sumbit my reply in that original thread yesterday. So I created this new thread.

Here is my response to the last code/instruction you gave me:

I corrected a small mistake (on Integrated Security-SSPI and executed the last code you gave me.

I got the following debug error message:

1) A Box appeared and said: String or binary data would be truncated.

The statement has been terminated.

|OK|

2) After I clicked on the |OK| button, the following message appeared:

This "SqlException was unhandled

String or binary data would be truncated.

The statement has been terminated."

is pointing to the "Throw" code statement in the middle of

.......................................

Catch ex As Exception

MessageBox.Show(ex.Message)

Throw

Finally

..........

Please help and advise how to correct this problem in my project that is executed in my VB 2005 Express-SQL Server Management Studio Express PC.



Thanks,
Scott Chang

The code of my Form1.vb is listed below:

Imports System.Data

Imports System.Data.SqlClient

Imports System.Data.SqlTypes

Public Class Form1

Public Sub InsertNewFriend()

Dim connectionString As String = "Data Source=.SQLEXPRESS;Initial Catalog=shcDB;Integrated Security=SSPI;"

Dim connection As SqlConnection = New SqlConnection(connectionString)

Try

connection.Open()

Dim command As SqlCommand = New SqlCommand("sp_insertNewRecord", connection)

command.CommandType = CommandType.StoredProcedure

command.Parameters.Add("@procPersonID", SqlDbType.Int).Value = 7

command.Parameters.Add("@procFirstName", SqlDbType.NVarChar).Value = "Craig"

command.Parameters.Add("@procLastName", SqlDbType.NVarChar).Value = "Utley"

command.Parameters.Add("@procAddress", SqlDbType.NVarChar).Value = "5577 Baltimore Ave"

command.Parameters.Add("@procCity", SqlDbType.NVarChar).Value = "Ellicott City"

command.Parameters.Add("@procState", SqlDbType.NVarChar).Value = "MD"

command.Parameters.Add("@procZipCode", SqlDbType.NVarChar).Value = "21045"

command.Parameters.Add("@procEmail", SqlDbType.NVarChar).Value = "CraigUtley@yahoo.com"

Dim resulting As String = command.ExecuteNonQuery

MessageBox.Show("Row inserted: " + resulting)

Catch ex As Exception

MessageBox.Show(ex.Message)

Throw

Finally

connection.Close()

End Try

End Sub

Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load

InsertNewFriend()

End Sub

End Class

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved