i want to get the execution duration of the ssis package and insert into one table,so i used a variable--"duration" and specified it's expression is getdate(). I think that only i can get the start value of the varible and the finish value,then i can know the duration.but whether i can get these two values? or better way i should try?
thanks
I'm developing a web app that displays the running packages and the total elapsed time. I'm calling GetRunningPackages() method and using the ExecutionDuration property of the returned package. The duration seems to be only for the currently executing container and not the entire package. Is there a way to get the duration of the entire package? Thanks.
View 2 Replies View RelatedI have the following SQL query
SELECT
[Req_ID]
,[Service_Name]
,[Req_Started_Date]
,[Task_Name]
,[Task_Status]
,[Performer_Full_Name]
[code]....
Which works fine, but what I need to calculate the total duration of a request based on the duration of the tasks completed in the request based on Req_ID. I would like to use the CASE statement I have to determine the SLA_Mins for each task and add them together to get total request SLA_Mins.
Below is the create table schema and data
GO
/****** Object: Table [dbo].[MidrangeOtherSourceControl] Script Date: 06/03/2015 18:13:15 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[MidrangeOtherSourceControl](
[Req_ID] [float] NULL,
[Service_Name] [nvarchar](255) NULL,
[code]....
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies View RelatedI would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedHi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies View Related
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
I want to achieve the following in (SSIS/SSDT for SQL 2012) -Â
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
Dear Friends,
I store several configurations in the main database of my SSIS packages. I need to get the servername from a xml or txt file in order to get those configurations stored in my database.
How you think is the better way to do that?
Using a FlatFileSource to read the file and a script to save the value into a SSIS variable?
Using the package configuration I cant do that... maybe I dont know, but I can save the SSIS variale in the configuration file, but what I need is to do the inverse, read the configuration file and save the value in the SSIS variable.
How the best way you suggest?!
Regards!!
Thanks.
Hello,
View 13 Replies View RelatedI would like to see if someone can help me out.
Scenarion:
1.- SSIS Package execute tasks on 2000 SQL Server Database
2.- Execution takes places using Business Intelligence Studio
Question:
1.- How can I tracked that SQl 2000 tasks took place using a SSIS Package?
Thanks
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
If monitoring for duration with sql profiler, what does the number represent ie 2733906 is it milliseconds, thousandths, looked in BOL no clear definition
View 2 Replies View RelatedCan someone please tell me what unit of measurement the Duration column is in when running SQL Profiler? I assume milleseconds, but am not sure.
I'm trying to filter on this and want to be sure I'm not missing anything.
Thanks!
I found this nifty code on stackoverflow that works well but I'm trying to send the results to a text file and the column lengths are huge. I used CAST for the first line and it worked great but I can't seem to make it work with duration. Here's the original code:
SELECT
j.name,
h.run_status,
durationHHMMSS = STUFF(STUFF(REPLACE(STR(h.run_duration,7,0),
' ','0'),4,0,':'),7,0,':'),
[code]....
how to run a CAST on DURATION?
I am trying to get a query that will allow me to report the time taken to complete a certain training module.
The database itself does not have a duration field so I am tring to get the duration by using MIN and MAX. I can get the timing for when the module was opened and the time for the last mouse click on it, from this I need to be able to calculate the time taken to complete.
Query I am using to get the basic info comes from 3 tables so I have only attached the relevent output. Query used is as follow:
SELECT *
FROM PPS_SCOS, PPS_TRANSCRIPTS, PPS_TRANSCRIPT_DETAILS, PPS_PRINCIPALS
WHERE PPS_SCOS.SCO_ID = PPS_TRANSCRIPTS.SCO_ID
AND PPS_TRANSCRIPTS.TRANSCRIPT_ID = PPS_TRANSCRIPT_DETAILS.TRANSCRIPT_ID
AND PPS_TRANSCRIPTS.PRINCIPAL_ID = PPS_PRINCIPALS.PRINCIPAL_ID
AND PPS_SCOS.NAME LIKE 'MTM-106 The Dangers of Smoking'
AND PPS_PRINCIPALS.NAME LIKE 'Nigel Cordiner'
AND PPS_TRANSCRIPTS.TICKET NOT LIKE 'l-%'
ORDER BY PPS_TRANSCRIPT_DETAILS.DATE_CREATED
Output:
pps_scospps_scospps_transcript_detailspps_principalspps_principals
SCO_IDNAME DATE_CREATED PRINCIPAL_ID NAME
136850MTM-106 The Dangers of Smoking08:17:2516287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:17:2516287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:17:4016287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:18:2516287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:18:5716287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:19:1416287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:19:4716287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:20:2116287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:20:4416287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:21:2616287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:22:1316287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:24:5516287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:25:1216287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:25:2916287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:26:4916287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:27:0216287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:27:2916287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:27:4316287Nigel Cordiner
Have added the column heading and the tables the output comes from.
Relatively new to SQL so any help would be greatly received.
I have a query that displays number of hours duration in a jobs by months matrix. Here is a simplified version of my tables.
CREATE TABLE jobhead (
jobnum varchar (14) NULL,
jobcompletiondate datetime NULL
)
CREATE TABLE labordtl (
jobnum varchar (14) NULL ,
clockindate datetime NULL ,
clockintime decimal(6, 2) NULL ,
)
Here's an abbreviated query.
SELECT h.JobNum,
(CASE WHEN MONTH(h.JobCompletionDate) = 1 THEN datediff(day,MIN(l.ClockInDate),MAX(l.clockInDate)) ELSE 0 END) AS JAN,
(CASE WHEN MONTH(h.JobCompletionDate) = 2 THEN datediff(day,MIN(l.ClockInDate),MAX(l.clockInDate)) ELSE 0 END) AS FEB,
...
FROM JobHead h
INNER JOIN LaborDtl l ON h.JobNum=l.JobNum
WHERE JobCompletionDate>='20070101' AND JobCompletionDate <'20080101'
AND l.ClockInTime<>0
GROUP BYh.JobNum
,h.JobCompletionDate
The query shows, for each job, the month in which the job completed, and the number of hours it took to complete. I€™m calculating the number of days€™ duration by doing a datediff between the oldest and newest clockindates. I need to ignore adjustment transactions in the labordtl table €“ these rows are easily identified as they have clockintime values of 0. So far, so good. Now here€™s my problem.
There are some jobs which have only one €śreal€? labor transaction €“ this could happen if the job only took one day to complete. Other labor transactions may exist for that job, but let's say they are adjustments which we can ignore -- the date they were entered should not extend the duration of the job. In this situation, my datediff between the oldest valid transaction and the newest, returns 0. I don€™t have to count hours between clockintime and clockouttime. The rule is simply that if there is only one "real" labor transaction, I need to count this as a 1 day job.
I thought a nested CASE statement or expression might be the way to go but I didn't make any real progress.
Any ideas to solve this problem would be appreciated.
Hi!
Does anyone know how to query for the job duration of all jobs in a server?
Thanks!
Hi all, I want to find working duration between two datetimes in c#.i'm using following code... DateTime starttime = Convert.ToDateTime(Session["StartTime"]); DateTime endtime = DateTime.Now; TimeSpan duration = endtime - starttime; DateTime period = new DateTime(duration.Ticks); i want to store this duration in database through stored procedure, i've give datetime datatype to duration but it is giving error in conversion of TimeSpan to DateTime..Please help... Thanks
View 1 Replies View RelatedSQL 6.5 - run duration 6-7 hours
SQL 7.0 - run duration 12-13 hours
175+ columns with total record size=570
4.2M records with tablesize 2.5G
It's a simple 'select into...' with some embedded logic from a work table with all char fields into the actual table converting char fields into various data types (int, datetime, real, etc.) Here is a sample of the code:
SELECT
LoanNum=CASE
WHEN ISNUMERIC(ACCT#)=1 THEN CONVERT(int,ACCT#)
ELSE NULL
END,
PaidToDt=CASE
WHEN PAIDDT = '0001-01-01' THEN NULL
WHEN ISDATE(PAIDDT)=1 AND SUBSTRING(PAIDDT,1,2) = '19' THEN CONVERT(smalldatetime,PAIDDT)
WHEN ISDATE(PAIDDT)=1 AND SUBSTRING(PAIDDT,1,2) = '20' AND SUBSTRING(PAIDDT,3,2) < '79' THEN CONVERT(smalldatetime,PAIDDT)
ELSE NULL
END,
.
.
.
INTO db.owner.tablename
FROM db.owner.wrktablename (NOLOCK)