Dynamic Query In Stored Procedure
Jun 13, 2008
Hi, I have a table with values such as test1, test2, test3, test4, test5.
I need to write a stored procedure with paramater (number TINYINT, number2 TINYINT), the number represents the field that I'm going to select and compare. For example if I pass in (1,5) I will need the fields test1 and test5 and store them in Temp and Temp2. How do I write the following to so it will dynamically select which field to use when passing the parameters?
DECLARE @Temp TINYINT,
DECLARE @Temp2 TINYINT,
SELECT top 1 Temp = test1, Temp2 = test5 from table
View 4 Replies
ADVERTISEMENT
Aug 16, 2007
Hi,
I need to create a stored procedure, which needs to accept the column name and table name as input parameter,
and form the select query at the run time with the given column name and table name..
my procedure is,
CREATE PROC spTest
@myColumn varchar(100) ,
@myTable varchar(100)
AS
SELECT @myColumn FROM @myTable
GO
This one showing me the error,
stating that myTable is not declared..
.............as i need to perform this type of query for more than 10 tables.. i need the stored procedure to accept the column and table as parameters..
Plese help me?? Is it possible in stored procedure..
View 3 Replies
View Related
Apr 22, 2008
Hi i am trying to make the "userName" section of the code below dynamic as well, how can i do this, the reason being userName will not always be passed through to it.
ALTER PROCEDURE [dbo].[stream_UserFind]
(
@userName varchar(100),
@subCategoryID INT,
@regionID INT
)ASdeclare @StaticStr nvarchar(5000)set @StaticStr = 'SELECT DISTINCT SubCategories.subCategoryID, SubCategories.subCategoryName,Users.userName ,UserSubCategories.userIDFROM Users INNER JOIN UserSubCategories ON Users.userID= UserSubCategories.userIDINNER JOINSubCategories ON UserSubCategories.subCategoryID = SubCategories.subCategoryID WHERE UserName like ' + char(39) + '%' + @UserName + '%' + char(39)
if(@subCategoryID <> 0) set @StaticStr = @StaticStr + ' and SubCategories.subCategoryID = ' + cast( @subCategoryID as varchar(10))if(@regionID <> 0) set @StaticStr = @StaticStr + ' and SubCategories.RegionId = ' + cast( @regionID as varchar(10))
print @StaticStr
exec(@StaticStr)
)
View 10 Replies
View Related
Apr 19, 2008
Hi i have a page whereby the user can make a search based on three things, they are a textbox(userName), dropdownlist(subcategoryID), and region (regionID). The user does not have to select all three, he or she can enter a name into the textbox alone and make the search or enter a name into the textbox and select a dropdownlist value, my question is how can i build this procedure, I tried this but it didnt work;
Code:
ALTER PROCEDURE [dbo].[stream_UserFind]
(
@userName varchar(100),
@subCategoryID INT,
@regionID INT
)
AS
declare @StaticStr nvarchar(5000)
set @StaticStr = 'SELECT DISTINCT SubCategories.subCategoryID, SubCategories.subCategoryName,
Users.userName ,UserSubCategories.userID
FROM Users INNER JOIN UserSubCategories ON Users.userID= UserSubCategories.userIDINNER JOIN
SubCategories ON UserSubCategories.subCategoryID = SubCategories.subCategoryID WHERE UserName like @UserName'
if(@subCategoryID <> 0)
set @StaticStr = @StaticStr + ' and SubCategories.subCategoryID = @subCategoryID '
if(@regionID <> 0)
set @StaticStr = @StaticStr + ' and SubCategories.RegionId = @regionID '
exec sp_executesql @StaticStr
)
View 2 Replies
View Related
Jul 23, 2014
I have created a stored procedure with dynamic query and using sp_executesql . stored procedure is work fine.
Now i want to call stored procedure in select statement because stored procedure return a single value.
I search on google and i find openrowset but this generate a meta data error
So how i can resolve it ???
View 7 Replies
View Related
Sep 26, 2014
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
View 3 Replies
View Related
Jul 3, 2007
Ok, so i have this program, and at the moment, it generates an sql statement based on an array of db fields, and an array of values...
my question is this, is there any way to create a stored procedure that has multiple dynamic colums, where the amount of colums could change based on how many are in the array, and therefore passed by parameters...
if this is possible, is it then better the pass both columns and values as parameters, (some have over 50 columns)...or just create a seperate stored procedure for each scenario?? i have no worked out how many this could be, but there is 6 different arrays of colums, 3 possible methods (update, insert and select), and 2 options for each of those 24...so possibly upto 48 stored procs...
this post has just realised how deep in im getting. i might just leave it as it is, and have it done in my application...
but my original question stands, is there any way to add a dynamic colums to a stored proc, but there could be a different number of colums to update or insert into, depending on an array??
Cheers,
Justin
View 2 Replies
View Related
Sep 7, 2004
Hi all,
I have a web application that has a search engine that returns records based off what the user selects in the search engine. I am currently using coalesce in the where statement in my stored procedure to return the records. For eample,
where field1= coalesce(@parm1,field1). I don't know if this example is better than building the sql statement dynamically in a parameter then executing the parameter with sp_executesql. Can someone explain to me which is better or if there is a better solution?
Thanks,
James
View 5 Replies
View Related
Aug 6, 2004
CREATE PROCEDURE ggg_test_sp
@start_date datetime,@end_Date datetime
AS
SET NOCOUNT ON
DECLARE @sqlstmt varchar(1000)
SELECT @sqlstmt='SELECT * FROM ggg_emp WHERE date_join BETWEEN ' +CONVERT(varchar(10),@start_date-1,101) + ' AND ' +CONVERT(varchar(10),@end_Date+1,101)
SELECT @sqlstmt
EXEC (@sqlstmt)
GO
I want to apply date filter in the above sp with dynamic sql stmt. When i execute the above procedure with date ranges( @start_date=07/06/2004 AND @end_Date= 08/06/2004)i am not getting any result because my @sqlstmt variable has the select stamet
SELECT * FROM ggg_emp WHERE date_join BETWEEN 07/06/2004 AND 08/06/2004
BUT it should have the sqlstmt as
SELECT * FROM ggg_emp WHERE date_join BETWEEN '07/06/2004' AND '08/06/2004' to produce the required result
I know that for the above SP we dont need any dynamic sql but this is just an example.
So anyone can help me on this issue.
Thanks.
View 1 Replies
View Related
Sep 29, 2007
Can anyone help me with this dumb question?
I want to use a stored procedure to bring back a recordset depending if a bit column is set to 1. My table has a number of columns that are of Data Type bit and I want to be able to specify which particular column I'm interested in as a parameter when I call the Stored Procedure.
I have set up the Stored Procedure as follows:
CREATE PROCEDURE getProducts
@param1 varchar(50)
AS
SELECT ProductID, ProductName
FROM dbo.Products
WHERE @param1 = '1'
GO
I'm calling it like this:
Dim cmdX, cmdParam, rsX
cmdParam = "OnSpecial"
set cmdX = Server.CreateObject("ADODB.Command")
cmdX.ActiveConnection = conn_STRING
cmdX.CommandText = "dbo.getProducts"
cmdX.Parameters.Append cmdX.CreateParameter("@RETURN_VALUE", 3, 4)
cmdX.Parameters.Append cmdX.CreateParameter("@param1", 200, 1,50,cmdParam)
cmdX.CommandType = 4
cmdX.CommandTimeout = 0
cmdX.Prepared = true
set rsX = cmdX.Execute
rsX_numRows = 0
I know for a fact that I have products in my dbase with the bit column 'OnSpecial' set to 1, yet no records are coming back.
Any pointers would be most appreciated.
View 3 Replies
View Related
Jul 23, 2005
I have a stored procedure spGetAccessLogDynamic and when I try to callit I get the following error:Server: Msg 2812, Level 16, State 62, Line 1Could not find stored procedure 'S'.I dont know why because I dont have anything refering to storedprocedure 'S'I have ran my SQL String with sample values and it works fine. So Iam presuming that it is some kind of syntax error in my storedprocedure but have tried everything and cant find it!Anyway here is the sample data I am using to call it and my spExec spGetAccessLogDynamic '24', '2005/07/04 00:00:00 AM', '2005/11/0400:00:00 AM', 'TimeAccessed DESC'CREATE PROCEDURE spGetAccessLogDynamic(@PinServiceID varchar (4),@StartDate varchar(40),@EndDate varchar(40),@SortExp varchar (100))AS-- Create a variable @SQL StatementDECLARE @SQLStatement varchar-- Enter the Dynamic SQL statement into the variable @SQLStatementSELECT @SQLStatement = ( 'SELECT A.PinValue,A.TimeAccessed,C.Forename, C.SurnameFROM AccessLog A, Members C, Pins PWHERE P.PinValue = A.PinValue ANDP.MemberID = C.MemberID AND A.PinServiceID= ''' + @PinServiceID + '''AND A.TimeAccessed BETWEEN dbo.func_DateMidnightPrevious( ''' +@StartDate + ''' ) AND dbo.func_DateMidnightNext( ''' + @EndDate+''')GROUP BY A.PinValue,A.TimeAccessed, C.Forename, C.SurnameORDER BY ' + @SortExp)-- Execute the SQL statementEXEC ( @SQLStatement)GOAny help would be very very much appreciated!!!!!!ThanksCaro
View 2 Replies
View Related
Dec 4, 2007
We are continuing to have issues with a certain stored procedure using dynamic sql. The issue arose when we tried to clean the stored procedure up, and seemed to have zero problems in staging. As soon as we moved it into production, the stored proc caused excessive blocking and completely slowed down our production environment. We immediately rolled back the older version and production is back to normal.
After looking at the new procedure I don't understand how it could cause blocking. Any help is much appreciated!
Old Proc without issues----
--------
USE [Realist_Prod_1203]
GO
/****** Object: StoredProcedure [dbo].[USP_GetMatchedMLSRecord] Script Date: 12/04/2007 09:33:37 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/*
=====================
Created By: Sunil/Sudeep 19-11-2003
Description:
Does a lookup of MLS Property data for reverse link. This is susceptible to error in that if erroneous data is given
to us,it will not find a match. For this reason, commented out the lookup on Suffix and changed the street
to use a like clause. Many users are putting the suffix in the street clause and no hits are generated.
This hurts performance, but it improves the hit ratio.
Usage: exec USP_GetMatchedMLSRecord 61,'3951','','KENSINGWOOD','DR','3951','columbus','OH','43230','39049','600-260368','600-260368-00','6000260368','urlll'
Mods:
01/08/2004 - Balawant - Added nullif(), as it was comparing apn numbers with '' (empty space)
02/23/2004 - Balawant - Added or (or State = '') condition for state, zip, city, StreetDirection and Suffix.
11/18/2004 - Sunil Padmanbhan - Added begin-end and modified altapn and parcelid in nullif statment.
04/03/2007 - Shiny - changed to Parameterized query generation
04/03/2007 - Vasan - Removed redundant nullif's and added a limit of 100 records on output
04/03/2007 - Shiny - Removed more Nullif's and changed datatypes for Zip and CountyID to Char to match with table datatypes
04/05/2007 - Vasan - Modified to match resultsets with original procedure
=====================
if exists (select 1 from sysobjects where name = 'USP_GetMatchedMLSRecord')
drop procedure USP_GetMatchedMLSRecord
grant exec on USP_GetMatchedMLSRecord to webuser
*/
CREATE PROCEDURE [dbo].[USP_GetMatchedMLSRecord]
(
@GroupID int,
@HouseNumber varchar(50),
@StreetDirection varchar(50),
@StreetName varchar(50),
@Suffix varchar(50),
@Unit varchar(50),
@City varchar(50),
@State varchar(50),
@ZIP char(50),
@FIPS varchar(10),
@ApnNumber varchar(50),
@AltApn varchar(50),
@ParcelId varchar(50),
@ReverseLinkURL varchar(200)
)
AS
DECLARE @CountyID char(6)
Select @CountyID=CountyID from ltCounties where FIPS=@FIPS
IF (@ApnNumber IS NOT NULL AND @ApnNumber <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@ApnNumber AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber=@ApnNumber AND GroupID = @GroupID ;
ELSE
BEGIN
IF (@AltApn IS NOT NULL AND @AltApn <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@AltApn AND GroupID=@GroupID))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @AltApn AND GroupID=@GroupID;
ELSE
IF (@ParcelId IS NOT NULL AND @ParcelId <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WHERE APNnumber=@ParcelId AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @ParcelId AND GroupID=@GroupID;
ELSE
BEGIN
-- Finalize parameter values
IF @ReverseLinkURL IS NULL SET @ReverseLinkURL = '';
IF @StreetName IS NOT NULL AND @StreetName <> '' SET @StreetName = @StreetName + '%';
-- Build up SQL text dynamically, only including filter predicates for those parameters that the user wants
-- to search on.
DECLARE @sqltext nvarchar(4000)
SET @sqltext = 'Select top 100 '''' + @ReverseLinkURL as ''ReverseLinkBaseURL'',MLSNumber,Comment
from tblMLSListing WITH (NOLOCK)
where '
-- Because of skew and relative few group IDs, you may want to use an inline literal for this one parameter
-- to avoid plan sharing across different GroupIDs. Use explicit parameterization for the other parameters.
if @GroupID is null set @sqltext = @sqltext + '1=1' --ignore Group_ID if null
else SET @sqltext = @sqltext + 'GroupID=' + CONVERT (varchar(30), @GroupID) + ' ' ;
--House number is mandatory: IF @HouseNumber IS NOT NULL AND @HouseNumber <> ''
SET @sqltext = @sqltext + ' AND HouseNumber=@HouseNumber '
IF @StreetDirection IS NOT NULL AND @StreetDirection <> '' SET @sqltext = @sqltext + ' AND (StreetDirection=@StreetDirection or @StreetDirection='''') '
IF @StreetName IS NOT NULL AND @StreetName <> '' SET @sqltext = @sqltext + ' AND StreetName like @StreetName '
IF @Suffix IS NOT NULL AND @Suffix <> '' SET @sqltext = @sqltext + ' AND (Suffix=@Suffix or Suffix='''') '
--Unit is mandatory: IF @Unit IS NOT NULL AND @Unit <> ''
SET @sqltext = @sqltext + ' AND Unit=@Unit '
IF @City IS NOT NULL AND @City <> '' SET @sqltext = @sqltext + ' AND (City=@City or City='''') '
IF @State IS NOT NULL AND @State <> '' SET @sqltext = @sqltext + ' AND (State=@State or State='''') '
IF @ZIP IS NOT NULL AND @ZIP <> '' SET @sqltext = @sqltext + ' AND (ZIP=@ZIP or ZIP='''') '
--CountyId is mandatory: IF @CountyID IS NOT NULL AND @CountyID <> ''
SET @sqltext = @sqltext + ' AND CountyID=@CountyID '
-- Execute as an explicitly parameterized query. This will provide plan reuse for any executions of the proc
-- that have the same @GroupID and the same combination of non-empty parameters.
/*print @sqltext
print '@ReverseLinkURL = ' + @ReverseLinkURL
print '@HouseNumber = ' + @HouseNumber
print '@StreetDirection = ' + @StreetDirection
print '@StreetName = ' + @StreetName
print '@Suffix = ' + @Suffix
print '@Unit = ' + @Unit
print '@City = ' + @City
print '@State = ' + @State
print '@ZIP = ' + @ZIP
print ' @CountyID = ' + @CountyID
print 'debug: ApnNumber = ' + @ApnNumber*/
EXEC sp_executesql
@sqltext,
N'@ReverseLinkURL varchar(200), @HouseNumber varchar(50), @StreetDirection varchar(50), @StreetName varchar(50),
@Suffix varchar(50), @Unit varchar(50), @City varchar(50), @State varchar(50), @ZIP varchar(50), @CountyID varchar(50)',
@ReverseLinkURL=@ReverseLinkURL, @HouseNumber=@HouseNumber, @StreetDirection=@StreetDirection, @StreetName=@StreetName,
@Suffix=@Suffix, @Unit=@Unit, @City=@City, @State=@State, @ZIP=@ZIP, @CountyID=@CountyID
END
END
New Proc WITH Blocking issues----
--------
/*
=====================
Created By: David Barrs 8-13-2002
Description: Returns the properties for given group id
Usage:
EXEC USP_GetMatchedMLSRecord 1,'8108','','dunn','','','austin','TX','','48453','','','','http://sef.mlxchange.com/reverselink.asp?action=reverselink'
Mods:
xx/xx/xxxx - who - Description
11/28/2007 - Shiny - Refactored the procedure
\\\\\\
=====================
if exists (select 1 from sysobjects where name = 'USP_GetMatchedMLSRecord')
drop procedure USP_GetMatchedMLSRecord
grant exec on USP_GetMatchedMLSRecord to webuser
*/
ALTER PROCEDURE [dbo].[USP_GetMatchedMLSRecord]
(
@GroupID int,
@HouseNumber varchar(50),
@StreetDirection varchar(50),
@StreetName varchar(50),
@Suffix varchar(50),
@Unit varchar(50),
@City varchar(50),
@State varchar(50),
@ZIP char(50),
@FIPS varchar(10),
@ApnNumber varchar(50),
@AltApn varchar(50),
@ParcelId varchar(50),
@ReverseLinkURL varchar(200)
)
AS
DECLARE
@sqltext nvarchar(4000),
@paramlist nvarchar(4000),
@CountyID char(6)
Select @CountyID=CountyID from ltCounties where FIPS=@FIPS
IF (@ApnNumber IS NOT NULL AND @ApnNumber <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@ApnNumber AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber=@ApnNumber AND GroupID = @GroupID ;
ELSE
BEGIN
IF (@AltApn IS NOT NULL AND @AltApn <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@AltApn AND GroupID=@GroupID))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @AltApn AND GroupID=@GroupID;
ELSE
IF (@ParcelId IS NOT NULL AND @ParcelId <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WHERE APNnumber=@ParcelId AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @ParcelId AND GroupID=@GroupID;
ELSE
BEGIN
-- Finalize parameter values
IF @ReverseLinkURL IS NULL SET @ReverseLinkURL = '';
IF @StreetName IS NOT NULL AND @StreetName <> '' SET @StreetName = @StreetName + '%';
-- Build up SQL text dynamically, only including filter predicates for those parameters that the user wants
-- to search on.
SELECT @sqltext = 'Select top 100 '''' + @ReverseLinkURL as ''ReverseLinkBaseURL'',MLSNumber,Comment
from tblMLSListing WITH (NOLOCK)
where '
IF @GroupID IS NOT NULL
SELECT @sqltext = @sqltext + 'GroupID=' + CONVERT (varchar(30), @GroupID) + ' '
SELECT @sqltext = @sqltext + ' AND HouseNumber=@HouseNumber '
IF @StreetDirection IS NOT NULL
SELECT @sqltext = @sqltext + ' AND StreetDirection = @StreetDirection '
IF @StreetName IS NOT NULL
SELECT @sqltext = @sqltext + ' AND StreetName LIKE @StreetName + ''%'''
IF @Suffix IS NOT NULL
SELECT @sqltext = @sqltext + ' AND Suffix = @Suffix'
SELECT @sqltext = @sqltext + ' AND Unit=@Unit '
IF @City IS NOT NULL
SELECT @sqltext = @sqltext + ' AND City = @City'
IF @State IS NOT NULL
SELECT @sqltext = @sqltext + ' AND State = @State'
IF @ZIP IS NOT NULL
SELECT @sqltext = @sqltext + ' AND ZIP = @ZIP'
SELECT @sqltext = @sqltext + ' AND CountyID='+ CONVERT (varchar(30), @CountyID)+' '
SELECT @paramlist = '
@GroupID int,
@HouseNumber varchar(50),
@StreetDirection varchar(50),
@StreetName varchar(50),
@Suffix varchar(50),
@Unit varchar(50),
@City varchar(50),
@State varchar(50),
@ZIP char(50),
@FIPS varchar(10),
@ApnNumber varchar(50),
@AltApn varchar(50),
@ParcelId varchar(50),
@ReverseLinkURL varchar(200)'
/*
print '@ReverseLinkURL = ' + @ReverseLinkURL
print '@HouseNumber = ' + @HouseNumber
print '@StreetDirection = ' + @StreetDirection
print '@StreetName = ' + @StreetName
print '@Suffix = ' + @Suffix
print '@Unit = ' + @Unit
print '@City = ' + @City
print '@State = ' + @State
print '@ZIP = ' + @ZIP
print '@CountyID = ' + @CountyID
print 'debug: ApnNumber = ' + @ApnNumber
*/
EXEC sp_executesql @sqltext, @paramlist, @GroupID, @HouseNumber, @StreetDirection, @StreetName,
@Suffix, @Unit, @City, @State, @ZIP, @FIPS, @ApnNumber, @AltApn, @ParcelId, @ReverseLinkURL
END
END;
Thank You,
-D
View 1 Replies
View Related
Aug 1, 2006
Okay, I have sort of a peculiar permissions question I am wondering if someone can help me with. Basically, here's the scenario...
I have a CLR stored procedure which does some dynamic SQL building based on values sent in via XML. It's a CLR stored procedure using XML because I want to build a parameterized statement (to guard against SQL Injection) based on a flexible number of parameters which are basically passed in the XML.
The dynamic SQL ends up reading from a table I'll call TableX and I actually discovered an (understandable) quirk with security.
Basically, the connection context is using security for a low-privilaged Windows account ("UserX") and UserX has no permission to the table referenced in the dynamic SQL but because of the dyanmic nature of the query, the stored procedure ends up adopting the security context of UserX. Naturally, this throws a security exception saying UserX has no SELECT permission on TableX.
Now, I can give UserX read permission to the table in question to get things running, but one of the points of using stored procedures is to defer security to the procedure level vs. configuration for tables or columns.
So in striving toward my ideal of security at the procedure level, my question is what is the best way to allow minimum privilege in this case?
I thought about having the internals of the CLR stored procedure run under a different (low-privalaged) security context, but I am wondering if there's an alternate configuration that may be as secure, but simpler.
PS - Please don't let this degenerate into a conversation about OR mappers. I know that happens a lot on these forums.
View 3 Replies
View Related
Aug 23, 2007
I am taking my first steps into stored procedures and I am working on a solution for efficiently paging large resultsets with SQL Server 2000 based on the example on 4Guys: http://www.4guysfromrolla.com/webtech/042606-1.shtml
The problem with my stored procedure is, is that it doesn't seem to recognize a variable (@First_Id) in my dynamic Sql. With this particular sproc I get the error message: "Must declare the scalar variable '@First_Id'"It seems to be a problem with 'scope', though I still can't yet figure out. Can anyone give me some hints on how to correctly implement the @First_Id in my stored procedure? Thanks in advance!
Here's the sproc:
ALTER PROCEDURE dbo.spSearchNieuws(@SearchQuery NVARCHAR(100) = NULL,@CategorieId INT = NULL,@StartRowIndex INT, @MaximumRows INT,@Debug BIT = 0)ASSET NOCOUNT ONDECLARE @Sql_sri NVARCHAR(4000),@Sql_mr NVARCHAR(4000),@Paramlist NVARCHAR(4000),@First_Id INT, @StartRow INTSET ROWCOUNT @StartRowIndexSELECT @Sql_sri = 'SELECT @First_Id = dbo.tblNieuws.NieuwsId FROM dbo.tblNieuwsWHERE 1 = 1'IF @SearchQuery IS NOT NULLSELECT @Sql_sri = @Sql_sri + ' AND FREETEXT(dbo.tblNieuws.Nieuwskop, @xSearchQuery)' IF @CategorieId IS NOT NULLSELECT @Sql_sri = @Sql_sri + ' AND dbo.tblNieuws.CategorieId = @xCategorieId'SELECT @Sql_sri = @Sql_sri + ' ORDER BY dbo.tblNieuws.NieuwsId DESC'SET ROWCOUNT @MaximumRows SELECT @Sql_mr = 'SELECT dbo.tblNieuws.NieuwsId, dbo.tblNieuws.NieuwsKop, dbo.tblNieuws.NieuwsLink, dbo.tblNieuws.NieuwsOmschrijving, dbo.tblNieuws.NieuwsDatum, dbo.tblNieuws.NieuwsTijd, dbo.tblNieuws.BronId, dbo.tblNieuws.CategorieId, dbo.tblBronnen.BronNaam, dbo.tblBronnen.BronLink, dbo.tblBronnen.BiBu, dbo.tblBronnen.Video, dbo.tblCategorieen.CategorieFROM dbo.tblNieuws INNER JOIN dbo.tblBronnen ON dbo.tblNieuws.BronId = dbo.tblBronnen.BronId INNER JOIN dbo.tblCategorieen ON dbo.tblNieuws.CategorieId = dbo.tblCategorieen.CategorieId AND dbo.tblBronnen.CategorieId = dbo.tblCategorieen.CategorieId WHERE dbo.tblNieuws.NieuwsId <= @First_Id AND 1 = 1' IF @SearchQuery IS NOT NULLSELECT @Sql_mr = @Sql_mr + ' AND FREETEXT(dbo.tblNieuws.Nieuwskop, @xSearchQuery)' IF @CategorieId IS NOT NULLSELECT @Sql_mr = @Sql_mr + ' AND dbo.tblNieuws.CategorieId = @xCategorieId' SELECT @Sql_mr = @Sql_mr + ' ORDER BY dbo.tblNieuws.NieuwsId DESC'IF @Debug = 1PRINT @Sql_mr SELECT @Paramlist = '@xSearchQuery NVARCHAR(100), @xCategorieId INT'EXEC sp_executesql @Sql_sri, @Paramlist, @SearchQuery, @CategorieIdEXEC sp_executesql @Sql_mr, @Paramlist, @SearchQuery, @CategorieId
View 8 Replies
View Related
Apr 29, 2008
Hi all,
I'm using sql 2005. Can some one please tell me how to write dynamic sql for count. What i want is that i want to count the number of employees existing for the given department names and get the counted values as output into my vb.net 2.0 project. If any one know who to write this please send the code.. Please help me.. I want the below code to change to dynamic sql:
Alter proc GetCountforemp
@DestName varchar(200)=null,
@total int output
as
begin
SELECT @total = Count(distinct Employee.EmployeeID) FROM Employee
INNER JOIN Dest R on R.DestID=Employee.DestID
WHERE R.DestName in ('''+@DestName+''')
end
View 1 Replies
View Related
Jun 6, 2008
My existing ASP 1.0 site keeps getting hacked using SQL injections. I have rewritten the site in ASP 3.5 to stop the attacks but cannot figure out how to dynamically generate a basic keyword search.
I am trying to take the keywords entered into an array and then construct the WHERE clause - not having much luck. Getting either errors or double LIKE statements. Need some help.
string[] SqlKWSrch;
SqlSrch = KWordSrch.Text;SqlKWSrch = SqlSrch.Split(' ', ','); int AStop = SqlKWSrch.Length; int i = 0; foreach( string a in SqlKWSearch ) { if (i <= AStop) { SqlWHR = SqlWHR + "L_Kwords LIKE '%' + " + " '" + SqlKWSrch[i] + "' " + " + '%' AND "; } else { SqlWHR = SqlWHR + "L_Kwords LIKE '%' + " + " '" + SqlKWSrch[i] + "' " + " + '%' "; } i++; }
1) I can't seem to properly terminate the final LIKE statement2) can't figure out how to pass 'SqlWHR' to the procedure
GIVEN KEYWORDS: 'antique chairs' entered I want to end up with the below SP, the @SqlWHR parameter appeared to have worked once but it probably was an illusion.
PROCEDURE KeyWordSearch@SqlWHR varchar(100)AS
SELECT L_Name, L_City, L_State, L_Display FROM tblCompanies WHERE L_Kwords LIKE '%' + 'antique' + '%' AND L_Kwords LIKE '%' + 'chairs' + '%' AND L_Display = 1
RETURN
Thank you
View 5 Replies
View Related
May 25, 2004
Hi all!
I need to create a stored procedure with a parameter and then send a WHERE clause to that parameter (fields in the clause may vary from time to time thats why I want to make it as dynamic as possible) and use it in the query like (or something like) this:
---------------------------------------------------
@crit varchar(100)
SELECT fldID, fldName FROM tblUsers
WHERE @crit
----------------------------------------------------
Of course this does not work, but I don't know how it should be done, could someone please point me in the right direction on how to do this kind of queries.
cheers!
pelle
View 2 Replies
View Related
Jul 7, 2004
I am trying to do something similar to the following where I want to perform dynamic ordering on two tables that have been unioned as shown below.
CREATE PROCEDURE procedure_name
@regNum varchar(14),
@sortOrder tinyint = 1
AS
SELECT Filler_OrdNum As 'Accession', RTrim(Obs_Code) As 'Observation', REG As 'Register',
Obs_Date As 'Observation Date'
FROM tblSPG_Header
WHERE
REG = @regNum
UNION
SELECT Filler_OrdNum As 'Accession', RTrim(Obs_Code) As 'Observation', REG As 'Register',
Obs_Date As 'Observation Date'
FROM tblRCH_Header
WHERE
REG = @regNum
ORDER BY Obs_Date DESC
GO
Note that I am only sorting on the Obs_Date column, but I'd like to be able to sort on any column within the selection list. I know that I need to use:
ORDER BY CASE WHEN @sortOrder = 1 THEN Obs_Date END DESC
but I frequently get the following error when I try to do so:
"ORDER BY items must appear in the select list if the statements contain a UNION operator"
If anyone can offer any suggestions, I would appreciate it. Thanks.
View 1 Replies
View Related
Jul 23, 2004
Hi, I have several parameters that I need to pass to stored procedure but sometimes some of them might be null. For example I might pass @Path, @Status, @Role etc. depending on the user. Now I wonder if I should use dynamic Where clause or should I use some kind of switch, maybe case and hardcode my where clause. I first created several stored procedures like Documents_GetByRole, Documents_GetByRoleByStatus ... and now I want to combine them into one SP. Which approach is better. Thanks for your help.
View 1 Replies
View Related
Aug 17, 2004
Hi
I am getting the following error
Syntax error converting the varchar value 'Select * from Residential WHERE Price BETWEEN ' to a column of data type int.
when running the following SP.
CREATE PROCEDURE testing
(
@Locationnvarchar(100)=NULL,
@TypeHomenvarchar(50)=NULL,
@MinPriceint=0,
@MaxPriceint=9999999999,
@Bedroomsnvarchar(2)=NULL,
@BathsSearchnvarchar(2)=NULL
)
AS
Declare @strSql char(255)
Set @strSql="Select * from Residential WHERE "
Set @strSql=@strSql + "Price BETWEEN " + @MinPrice + " AND " + @MaxPrice
If @Location is NOT NULL
Set @strSql=@strSql + ' AND city = ' + @Location
If @TypeHome is NOT NULL
Set @strSql=@strSql + ' AND Type = ' + @TypeHome
Set @strSql=@strSql + ' AND BDRM >= ' + @Bedrooms
Set @strSql=@strSql + ' AND BATHS <= ' + @BathsSearch
Set @strSql=@strSql + ' AND IDX = Y'
Exec(@strSql)
What is causing this error?
Thanks in advance
View 3 Replies
View Related
Sep 7, 2004
I create a stored procedure as following:
........
CREATE Procedure myAutoSearch
(
@Make varchar(50),
@Model varchar(50),
@AutoType varchar(50),
@Miles float,
@Zipcode varchar(5)
)
AS
DECLARE @RowCount int
SELECT @RowCount = Count(*) FROM ZIPCodes WHERE ZIPCode = @Zipcode AND CityType = 'D'
if @RowCount > 0
BEGIN
SELECT
z.ZIPCode, z.City, z.StateCode, a.Make, a.Model, a.AutoPrice, a.AutoPrice2, a.AutoYear,
a.Mileage, a.AdID, a.ImageURL, dbo.DistanceAssistant(z.Latitude,z.Longitude,r.Latitude,r.Longitude) As Distance
/*
The above functions requires the Distance Assistant.
*/
FROM
ZIPCodes z, RadiusAssistant(@ZIPCode,@Miles) r, AutoAd a
WHERE
z.Latitude <= r.MaxLat
AND z.Latitude >= r.MinLat
AND z.Longitude <= r.MaxLong
AND z.Longitude >= r.MinLong
AND z.CityType = 'D'
AND z.ZIPCodeType <> 'M'
AND z.ZIPCode = a.Zipcode
AND a.AdActive = '1'
AND a.AdExpiredate >= getdate()
AND a.Make = @Make
AND dbo.DistanceAssistant(z.Latitude,z.Longitude,r.Latitude,r.Longitude) <= @Miles
/*
The above functions requires the Distance Assistant.
Also note that SQL Server caches the results so that this and the "SELECT dbo.DistanceAssistant"
functions are both only computed once.
*/
ORDER BY Distance, Make
END
ELSE
SELECT -1 As ZIPCode
--ZIP Code not found...
....................
This stored procedure work very well.
The question is how I add some dynamic condition inside the where condition.
I want to add:
If @Model <> "See All Models"
AND a.Model = @Model'
If @AutoType <> "New/Used"
AND a.Condition = @AutoType
I try several ways, but fail.
If you know how to add these two dynamic parameters into the condition of stored procedure, please help.
View 9 Replies
View Related
Mar 30, 2005
Hi
I am in the very final stages of
building a dating app for a client, I am totally stuck with the
advanced search page. been googling for days with limited success
For the most basic of purposes I have added a few form fields to my search.aspx page;
county (Dropdown list)
min age (Dropdown list)
max age (dropdown list)
Smoker (check box)
keyword (textbox)
My codebehind passes the vars to a stored procedure
@county = me.county.selectedvalue
etc
My problem is the stored procedure I sort of have the following but I can't get it to run
<code>
ALTER PROCEDURE dbo.TEST_ADVANCED_SEARCH
(@countyID int ,
@MaxAge
varchar(100),
@MinAge
varchar(100),
@smoker tinyint),
@keyword
varchar(250))
AS
DECLARE @SQL Varchar
(4000)
SELECT @SQL = 'dbo.user_accounts.profileComplete,
dbo.user_accounts.countyID, dbo.user_profiles.smoker,
dbo.user_profiles.Age
FROM dbo.user_accounts INNER
JOIN
dbo.user_profiles ON dbo.user_accounts.userID =
dbo.user_profiles.userID
WHERE (dbo.user_accounts.profileComplete =
1)'
IF @countyID > 0
SELECT @SQL = @SQL + ' AND
(dbo.user_accounts.countyID = @countyID)'
IF @MaxAge IS NOT
NULL
SELECT @SQL = @SQL + ' AND (dbo.user_profiles.Age <= @MaxAge)
'
IF @MinAge IS NOT
NULL
SELECT @SQL = @SQL + ' AND (dbo.user_profiles.Age >= @MinAge)
'
IF @smoker > 0
SELECT @SQL = @SQL + ' AND
(dbo.user_profiles.smoker = 1)'
IF @keyword IS NOT
NULL
SELECT @SQL = @SQL + ' AND (dbo.user_profiles.Description LIKE @MinAge)
'
EXEC(@SQL)
</code>
If I can get this to work I can add the remaining fields that I need
Am I Missing something glaringly obvious?
Any help or advice gratefully received
Thanks
View 3 Replies
View Related
Aug 20, 2007
I have a stored procedure being called based on user search criteria. Some, the colour and vendor fields are optional in the search so i do not want that portion of the procedure to run.
at this point i keep getting errors in the section bolded below
it never seems to recognize anything after the if @myColours <> 'SelectAll'
CREATE Procedure PG_getAdvWheelSearchResults3
(
@SearchDiameter NVarchar( 20 ),
@SearchWidth NVarchar( 20 ),
@minOffset int ,
@maxOffset int ,
@boltpattern1 NVarchar( 20 ),
@VendorName NVarchar( 40 ),
@myColours NVarchar( 40 )
)
As
BEGIN TRANSACTION
SELECT *, dbo.VENDORS.*, dbo.WHEEL_IMAGES.Wheel_Thumbnail AS Wheel_Thumbnail, dbo.WHEEL_IMAGES.Wheel_Image AS Wheel_Image,
dbo.WHEELS.*, dbo.VENDOR_IMAGES.Vendor_Thumbnail AS Expr1, dbo.VENDOR_IMAGES.Vendor_AltTags AS Expr2
FROM WHEEL_CHARACTERISTICS INNER JOIN
dbo.VENDORS ON WHEEL_CHARACTERISTICS.Vendor_ID = dbo.VENDORS.Vendor_ID INNER JOIN
dbo.WHEEL_IMAGES ON WHEEL_CHARACTERISTICS.Wheel_ID = dbo.WHEEL_IMAGES.Wheel_ID INNER JOIN
FILTER_CLIENT_WHEELS5 ON WHEEL_CHARACTERISTICS.Wheel_ID = FILTER_CLIENT_WHEELS5.Wheel_ID INNER JOIN
dbo.WHEELS ON WHEEL_CHARACTERISTICS.Wheel_ID = dbo.WHEELS.Wheel_ID INNER JOIN
CLIENT_WHEEL_PRICES5 ON FILTER_CLIENT_WHEELS5.Client_ID = CLIENT_WHEEL_PRICES5.ClientId AND
WHEEL_CHARACTERISTICS.Wheel_Char_ID = CLIENT_WHEEL_PRICES5.Wheel_Char_ID INNER JOIN
dbo.VENDOR_IMAGES ON dbo.VENDORS.Vendor_ID = dbo.VENDOR_IMAGES.Vendor_ID
WHERE (dbo.VENDORS.Vendor_Active = 'y') AND (FILTER_CLIENT_WHEELS5.FCW_Active = 'y')
AND (FILTER_CLIENT_WHEELS5.Client_ID = '1039')
AND (WHEEL_CHARACTERISTICS.Wheel_Diameter =@SearchDiameter)
AND (WHEEL_CHARACTERISTICS.Wheel_Width =@Searchwidth)
AND (WHEEL_CHARACTERISTICS.Wheel_Bolt_Pattern_1 = @boltpattern1)
if @myColours <> 'SelectAll'
and WHEEL_CHARACTERISTICS.Wheel_Search_Colour = @myColours
end if
AND (cast(WHEEL_CHARACTERISTICS.wheel_Offset as int(4)) BETWEEN @minOffset AND @maxOffset)
ORDER BY CLIENT_WHEEL_PRICES5.Price asc
COMMIT TRANSACTION
GO
Anyone know how i should word the if...statements?
I have not found anything that works yet.
Thanks
View 2 Replies
View Related
Oct 12, 2006
Hello,
I have a stored procedur like this:
--------------------------------------------
ALTER PROCEDURE dbo.pdpd_DynamicCall
@SQLString varchar(4096) = null
AS
create TABLE #T1
( column_1 varchar(10) ,
column_2 varchar(100) )
insert into #T1
execute ('execute ' + @SQLString )
select * from #T1
--------------------------------------------
The problem is that I want to call different procedures that can give back different columns.
Therefor I would have to define the table #T1 generically.But I don't know how.
Can anyone help me on this problem?
thank you
Werner
View 4 Replies
View Related
Sep 28, 2012
I can't figure out why this won't work. I want to use a variable for the 'ORDER BY' in my Stored Procedure.
I use this to order my results by product price or alphabetically from a dropdown menu. I have tried the following, but get the error below.
Code:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[SPResults]
[Code] ....
Code:
Msg 1008, Level 16, State 1, Procedure SPResults, Line 21
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name. Is this possible to do?
View 3 Replies
View Related
Mar 18, 2004
Hi
I have a small problem writing a stored procedure in a SQL Server 2000 database.
I would like to generate som part of the SQL inside this stored procedure that is used in an IN expression of my WHERE clause. There is no problem for me to generate a string containing my expression, the problem is that SQL-Server donīt generate a resulting SQL-statement.
Example:
CREATE PROCEDURE spDynStatement
AS
DECLARE @sPartOfSQLStatement NVARCHAR(100)
-- Some T-SQL that generates the dynamic part of the SQL-statement
-- .
-- .
-- .
-- As substitute I insert the string expression
SET @sPartOfSQLStatement = '''1''' + ', ' + '''1.5'''
-- SELECT @sPartOfSQLStatement results in: '1' , '1.5'
SELECT * FROM BBNOrganization WHERE OrgStructureID IN( @sPartOfSQLStatement ) -- does not work
SELECT * FROM BBNOrganization WHERE OrgStructureID IN( '1', '1.5' ) -- works!!!
GO
Thankfull for ideas on how to solve my problem,
Peter
View 1 Replies
View Related
Apr 28, 2008
Hello,
I have this stored procedure:
SELECT * from purchase
ORDER BY
CASE @OrderBy
WHEN 'traveller_name' THEN cast(traveller_name as nvarchar(100))
WHEN 'canceled' THEN cast(canceled as bit)
END
the @OrderBy is a nvarchar(100) parameter
traveller_name is an nvarchar(100) field
canceled is a bit field
When I execute the stored procedure it works fine until I execute it sorting by canceled field. After that, I cannot sort it again using the traveller_name field. I get this eror:
Conversion failed when converting the nvarchar value 'Jason' to data type bit.
(Jason is a record in the traveller_name)
Removing the castings and sorting by just the column name does not help.
Any ideas?
Thank you
View 7 Replies
View Related
Oct 24, 2007
We have a procedure that does some complicated table joins to populate a temporary table (declared in the proc) and then extraneous rows are removed from the table and the remaining rows are returned.
On the production server the procedure takes 22 seconds, but the identical query in a dynamic session window of SQL Server Management Studio takes 2 seconds. That doesn't make any sense.
We've profiled the procedure and discovered that the small loop at the end of the query runs through twice with each iteration taking 10 seconds. Again - the same section (but dynamic) profiles in at 0 seconds. We further narrowed it down to the compound delete statement from the @tblResults table.
Here's the looped section of code:
-- now delete the entries with no content
declare @deleted int
set @deleted = 1
declare @tmp table ([Id] int)
while @deleted <> 0
begin
delete from @tmp
-- get all entries with no child nodes
insert into @tmp ([Id])
select distinct r.[id] from @tblResults r
where r.[id] not in
(
select [Id] from @tblResults
where [Id] in (select distinct ParentId from @tblResults)
)
-- delete entries with no documents and region match
-- (this is where the slowdown occurs)
delete from @tblResults
where [id] in
(
select t.[id] from @tmp t where t.[id] not in
(select distinct dm.metatagid from documentmetatag dm
where dm.documentid in
(select distinct dr.documentid from documentregion dr, @region r
where (dr.regionid = r.regionId or @regionIds is null)
)
)
)
select @deleted = @@rowcount
end
We then return all rows from the @tblResults table.
We are totally stumped on why the procedure would take so much longer than running the same query in a SQL Manager window. Is there some issue with temporary tables as variables in a procedure? Any ideas anyone?
Thanks,
John
View 5 Replies
View Related
Jul 30, 2007
Hi Guys.
I want to construct a SQL in stored procedure in the following way. Please guide me how to achive this
CREATE PROCEDURE P_SAMPLE
(
@P_ONE NVARCHAR(240)
)
AS
BEGIN
DECLARE
@TMP_CNT INT
BEGIN
EXEC ('SELECT @TMP_CNT = 1')
-- PRINT @TMP_CNT
END
END
Regards
Mani
View 2 Replies
View Related
Jun 1, 2007
I have the following sp:@TABLE_NAME varchar(255),
@CONTROL_ID int
AS
DECLARE @sql varchar(4000)
SELECT @sql = 'DELETE FROM [' + @TABLE_NAME + '] WHERE CONTROL_ID = 5'SELECT @sql = 'DELETE FROM [' + @TABLE_NAME + '] WHERE CONTROL_ID = ' + @CONTROL_ID + ''
EXEC (@sql)
When I use the the first SELECT line, it works great.When I use the second dynamic select, SQL raises an error:
Syntax error converting the varchar value 'DELETE FROM [TABLE_SETTINGS] WHERE CONTROL_ID = ' to a column of data type int.What is wrong?
View 2 Replies
View Related
Feb 17, 2008
Hi, I hope some one can help me. I have a stored procedure (Microsoft SQL 2005 Express Edition) that I want users to be able to dynamically set the, group by, order by (@orderby) and where clause (@where). I have managed to get the group by to work but can't seem to get the where and order by to work. Here's my stored procedure. Any idea how this can be done? ALTER PROCEDURE [dbo].[sp_aggregate] -- Add the parameters for the stored procedure here @finfileid int, @phaseid int, @supplierid int, @measurementid int, @roleid int, @groupby int, @orderby int, @where int AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; -- Insert statements for procedure here SELECT MAX(ProjectFinFileMonthItems.ProjFinFileMonthItemsMonthId) AS ProjFinFileMonthItemsMonthId, SUM(ProjectFinFileMonthItems.ProjFinFileMonthItemsValue * ProjectFinFileMonthItems.ProjFinFileMonthItemsRate * ProjectFinFileMonthItems.ProjFinFileMonthItemsAvail / 100) AS total, MAX(ProjectFinFileItems.ProjPhaseId) AS phaseid, MAX(ProjectFinFileMonthItems.ProjDeliveId) AS deliveid, MAX(ProjectFinFileMonthItems.SupplierId) AS supplierid, MAX(ProjectFinFileMonthItems.ProjFinFileItemsId) AS ProjFinFileItemsId, MAX(ProjectFinFileMonthItems.ProjFinFileMonthItemsId) AS ProjFinFileMonthItemsId, MAX(ProjectFinFileMonthItems.ProjDeliveId) AS ProjDeliveId, MAX(ProjectPhases.ProjectPhaseName) AS ProjectPhaseName, MAX(Suppliers.SupplierName) AS SupplierName, MAX(ProjectFinFileMonthItems.RoleId) AS RoleId, MAX(Measurements.MeasurementName) AS MeasurementName, MAX(ProjectFinFileMonthItems.MeasurementId) AS MeasurementId, MAX(ProjectFinFileMonthItems.FinDataTypeId) AS FinDataTypeId, MAX(FinDataTypes.FinDataTypeName) AS FinDataTypeName, max(ProjectFinFileItems.FinFileId) as finfileid FROM ProjectFinFileItems INNER JOIN ProjectFinFileMonthItems ON ProjectFinFileItems.ProjFinFileItemsId = ProjectFinFileMonthItems.ProjFinFileItemsId LEFT OUTER JOIN FinDataTypes ON ProjectFinFileMonthItems.FinDataTypeId = FinDataTypes.FinDataTypeId LEFT OUTER JOIN Measurements ON ProjectFinFileMonthItems.MeasurementId = Measurements.MeasurementId LEFT OUTER JOIN Roles ON ProjectFinFileMonthItems.RoleId = Roles.RoleId LEFT OUTER JOIN ProjectPhases ON ProjectFinFileItems.ProjPhaseId = ProjectPhases.ProjectPhaseId LEFT OUTER JOIN Suppliers ON ProjectFinFileMonthItems.SupplierId = Suppliers.SupplierId /*dynamic where clause needs to go here */ /*dynamic group by clause */ GROUP BY CASE when @groupby=1 then ProjectFinFileItems.projphaseid --phaseid when @groupby=2 then ProjectFinFileMonthItems.supplierid -- supplierid when @groupby=3 then ProjectFinFileMonthItems.measurementid -- measurment when @groupby=4 then ProjectFinFileMonthItems.roleid --role else ProjectFinFileMonthItems.ProjFinFileMonthItemsId END /*dynamic order clause needs to go here */ END cheers Mark :)
View 2 Replies
View Related
Apr 19, 2008
Hi i have a page whereby the user can make a search based on three things, they are a textbox(userName), dropdownlist(subcategoryID), and region (regionID). The user does not have to select all three, he or she can enter a name into the textbox alone and make the search or enter a name into the textbox and select a dropdownlist value, my question is how can i build this procedure, this is what another user suggested but i am having trouble;
ALTER PROCEDURE [dbo].[stream_UserFind]
(
@userName varchar(100),
@subCategoryID INT,
@regionID INT
)AS
declare @StaticStr nvarchar(5000)set @StaticStr = 'SELECT DISTINCT SubCategories.subCategoryID, SubCategories.subCategoryName,Users.userName ,UserSubCategories.userIDFROM Users INNER JOIN UserSubCategories ON Users.userID= UserSubCategories.userIDINNER JOINSubCategories ON UserSubCategories.subCategoryID = SubCategories.subCategoryID WHERE UserName like @UserName'
if(@subCategoryID <> 0) set @StaticStr = @StaticStr + ' and SubCategories.subCategoryID = @subCategoryID 'if(@regionID <> 0) set @StaticStr = @StaticStr + ' and SubCategories.RegionId = @regionID '
exec sp_executesql @StaticStr
)
View 10 Replies
View Related
Apr 23, 2008
I have a situation where I'll need to get results from tables based on totally arbitrary filters. The user can select the field to compare against, the value, the comparison operator, and the boolean operator, so each bit in brackets would be configurable:[field] [>] [value] [and]The user can specify an arbitrary number of these, including zero of them. I like the coalesce function for situations that are a little more structured, but I think I'm stuck generating a dynamic query for this -- please correct e if I'm wrong!
View 1 Replies
View Related
