All, I am using SSIS in sqlserver. I wanted to enable logging in SSIS. I just want to log all the activities in the log file. How can i enable logging in SSIS? I would appreicate if any one could answer for this. thanks in Advance.
View 1 RepliesIs there a way to turn on/off a given logger dynamically across the board, and still enable the logging of task specific events, like "ExecuteSQLExecutingQuery" from the ExecuteSQL task or "WMIDataReaderOperation" from the WMI Data Reader task?
The use case is one where multiple loggers are defined in a package (custom and stock) and I'd like to toggle the execution tracing on a per logger basis.
I realize "logger toggling" can be done programmatically, but I'm wondering if that's the only way to accomplish the objective.
Greetings,
I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.
Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.
Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?
Thanks,
BCB
Hi,
I decided to use the SQL Server log provider to store logging data of all my Integration Services packages. I also created some reports about this data for operating purposes.
I have a problem occurs the name of the executing package is not always written to the log,but the name of the single task which failed. But that is not very useful information for operating, because I do not see any chance to get the name of the package by the information which is logged in the sysdtslog90 table in the database which I defined for SSIS Logging.
How do I configure the package to always log the package information into the table, too?
Best regards,
Stefoon
I recently read the project real ETL design best practices whitepaper. I too, want to do custom logging as I do today, and also use SSIS logging. The paper recommended using the variable system::PackageExecutionId to tie the 2 logging methods together.
View 4 Replies View RelatedI have a SQL 2005 database and am running the 2.0 framework. I cannot seem to enable SQL caching on the db. I'm using the command line tool as follows:
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727>aspnet_regsql -S 99.99.999.999 -Uwebteam -P sa -t tblname -d dbname -et
Enabling the table for SQL cache dependency.
.An error has happened. Details of the exception:The database 'dbname' is not enabled for SQL cache notification.
To enable a database for SQL cache notification, please use the System.Web.Caching.SqlCacheDependencyAdmin.EnableNotifications method, or the command line toolaspnet_regsql. To use the tool, please run 'aspnet_regsql.exe -?' for more information.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727>
I've replaced the ip address, dbname and tblname with ficticious names for obvious reasons here in the post.
What command can I enter to enable the database for caching?
Hi evryone
I have two databases. one is bayan and other is clearance. clearance was already there. i created new bayan. both database having same things. such table ,views.
both contains arabic and english records.
when i try to fetch records from clearance table as arabic it is working
the query is like:
select * from customers where cust_name_araibc='here arabic text'
it is working fine
but same query i try with bayan databses it runs but it doesnt display any records.
So is there anything like to enable languages in sql server databses.
Please reply soon
Its very urgent.
thanx in advance
hi
i have backup of transaction log of database but tracnscation log check box is desable ho i can enable this
how do i enable logs on a DTS on sql server2005?
Thanks
Peleg
Israel -the best place to live in aftr heaven 9but no one wan't to go there so fast -:)
I have to disable index using
alter index empind on emp diable;
but how to enable
alter index empind on emp enable;/its not working
Hi!I know that you can enable/disable a trigger through the altertable command. Once a trigger is disabled, is there a wayto determine whether it is disabled or enabled? I see there is astatus column in sysobjects ...is that what I should be using?thanks in advance for any helpKaren
View 1 Replies View RelatedHello,
I understand that SQL2005x64 bits ignore AWE enable in SQL because it can address all the memory without having to use AWE. How about 32 bits SQL2005, does it support AWE enabled??
Hi Folks,
I was testing my error handling and purposefully failed some messages. Automatic posion message detection kicked in and disabled my queue. I tried the following, one at a time to enable it again but it doesn't work:
ALTER QUEUE MigrationQueue WITH STATUS = ON;
ALTER QUEUE MigrationQueue WITH STATUS = ON, ACTIVATION (STATUS = ON);
I would have thought the first line would've worked but I get the following when trying to receive...
The service queue "MigrationQueue" is currently disabled.
Help.
I have a problem on creating a report using Microsoft SQL Server Business Intelligence Development Studio. I am new to this environment, anybody here can help me on how to enable the "DrillDown" on the table?
When I am using the wizard, the option to enable the drill down will appear, but when I am using "Report Server Project", I really don't know how to enable it, and theres was no table properties on how to enabled it.
Could you help me please
Thanks
Hi,
I am using DMO + VBScript to enable the xp_cmdshell feature in SQL Server 2005 Express.
But I get error "Item cannot be found in the collection corrosponding to the requested name or ordinal".
Here is the script which I am using:
Dim excmd: Set excmd = CreateObject("ADODB.Command")
Set excmd.ActiveConnection = connx ' This was created earlier using sa login and connected to master database
excmd.CommandType = 4
excmd.CommandText = "sys.sp_configure"
excmd.Parameters.Refresh
excmd.Parameters(1).Value = "show advanced options"
excmd.Parameters(2).Value = 1
excmd.Parameters(3).Value = Null
excmd.Execute () ' This line failes
If (Err.Number <> 0) Then
LogText "Unable to execute stored procedure. " & Err.Number & " " & Err.Description
Exit Sub
End If
excmd.CommandText = "RECONFIGURE WITH OVERRIDE"
excmd.Parameters.Refresh
excmd.Execute ()
If (Err.Number <> 0) Then
LogText "Unable to Refresh. " & Err.Number & " " & Err.Description
Exit Sub
End If
excmd.CommandText = "sys.sp_configure"
excmd.Parameters.Refresh
excmd.Parameters(1).Value = "xp_cmdshell"
excmd.Parameters(2).Value = 1
excmd.Parameters(3).Value = Null
excmd.Execute ()
If (Err.Number <> 0) Then
LogText "Unable to execute sp xp_cmdshell. " & Err.Number & " " & Err.Description
Exit Sub
End If
excmd.CommandText = "RECONFIGURE"
excmd.Parameters.Refresh
excmd.Execute ()
If (Err.Number <> 0) Then
LogText "Unable to Refresh after running sp. " & Err.Number & " " & Err.Description
Exit Sub
End If
Can some body provide a clue to me !!!
Thanks in advance
Amit
Hi - can anyone advise if it is possible to enable SQL 2005 SSIS to use AWE? If it is possible - how is this enabled?
Thanks
BravehearT1326
I have a date parameter that users can not choose because it is grayed out. The Prompt User property is checked in Report Manager. What else do I need to do to enable this functionality. I'm using SSRS 2005
Thanks
Dean
I have a number of SqlDataSource objects in my application, which don't have Optimistic Concurrency option enabled. The SDS objects use custom Sql statements so I can no longer select the Advance button to enable Concurrent Concurrency.
How can I enable this option? Is there a designt ime property, and even a run time property that can be set?
The only method we have so far is to create a new SDS, with Optimistic Concurrency switched on, then copy and paste my custom Sql into it and rebind my components..
Any help on this matter is appreciated.
Regards,
Steven
I have to admit I'm pretty new to ASP.net.
I'm trying to insert a row of data into my SQLExpress database table "Prets"
I'm getting the user_ID from the table "Membres"
Here's the code I have:
Imports System.Web.UI.PageImports System.Security.PrincipalImports WiseNetTableAdaptersPartial Class membre_sec_Pret_demande_pret Inherits System.Web.UI.Page Protected Sub submit_btn_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submit_btn.Click Dim User As String = My.User.Name Dim pretAdapter As New PretsTableAdapter Dim membreAdapter As New MembresTableAdapter pretAdapter.AjouterPret(Convert.ToInt32(membreAdapter.GetUserIDbyName(User)), Convert.ToDecimal(montant_txt.Text), Convert.ToString(raison_txt.Text)) End SubEnd Class
And here's the error I get at runtime:
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.Source Error:
Line 1610: }
Line 1611: WiseNet.MembresDataTable dataTable = new WiseNet.MembresDataTable();
Line 1612: this.Adapter.Fill(dataTable);
Line 1613: return dataTable;
Line 1614: }Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswisenetindustriesafc388c716067f12App_Code.tyietv41.0.cs Line: 1612 Stack Trace:
[ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.]
System.Data.DataTable.EnableConstraints() +1820725
System.Data.DataTable.set_EnforceConstraints(Boolean value) +39
System.Data.DataTable.EndLoadData() +138
System.Data.Common.DataAdapter.FillFromReader(DataSet dataset, DataTable datatable, String srcTable, DataReaderContainer dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue) +218
System.Data.Common.DataAdapter.Fill(DataTable[] dataTables, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +318
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +221
System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162
System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107
WiseNetTableAdapters.MembresTableAdapter.GetUserIDbyName(String nom) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswisenetindustriesafc388c716067f12App_Code.tyietv41.0.cs:1612
membre_sec_Pret_demande_pret.submit_btn_Click(Object sender, EventArgs e) in c:inetpubwwwrootWiseNetIndustriesmembre_secPretdemande_pret.aspx.vb:12
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Hello there, I have a table under SQL2005 express with 8 fields with a primaryKey defined.In my BLL in the table adapter there is one "SELECT DISTINCT prodCAT from prods" The prodCAT is a nvarchar(50) and it is not part of an index or primaryKey.When I preview the data from my BLL I get the correct data.I defined a new web form (aspx) and put a ddl (dropDownList) with an objectdataSource that relates to the above sql function/command and I get a"Failed to enable constraints. One or more rows contain values violating
non-null, unique, or foreign-key constraints." BTW when I defined the above SQL in the BLL I got a "The new command text makes the function return data with schema different from the schema of the main query" Any suggestions???
Hi guys
I have a program which imports data into sql server from csv files. This program uses the something like this
CREATE PROCEDURE MyImport
(
@FileName AS VARCHAR(200)
)
AS
SET NOCOUNT ON
DECLARE @SQL VARCHAR(4000)
SET @SQL = ' SELECT *
FROM OpenRowset(''MSDASQL'', ''Driver={Microsoft Text Driver (*.txt; *.csv)}; DefaultDir=C:;'', ''SELECT * FROM ' + QUOTENAME(@FileName) + '' + ''') as t
'
EXEC (@SQL)
when i excute this i get a permission error saying the account i specified in the web config doesn't have rights to run these type of scripts. I tried using the sa account which works. But its not recommended to setup applications to access the database using the sa account.
i did some research and i found out that yon can actually enable that by change a registry key. But i cant find the MSDASQL datasource under ms sql server providers in the registry.
Any other ways i can enable this?
Hi.
I right click the (root) Solution Explorer to add an SQL object (something.mdf) but I get an error message
that "Generating user instances in SQL Server is disabled. Use sp_configure 'user_instances enabled' "
WHERE DO I WRITE THE SP_CONFIGURE CODE IN VISUAL WEB DEVELOPER ?
(I don't see anything like new query of server and the one in the SQL SERVER management studio is already done).
10x
Hi.,please help.,i get this error.,i made my web and deploy it in a different system which is winserver03, we have in the same network.how will i enable SQL remote access:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified) Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: An error has occurred while establishing
a connection to the server. When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +421 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +133 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.GridView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.PreRenderRecursiveInternal() +50 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
Version Information: Microsoft .NET Framework Version:2.0.50727.1433;
ASP.NET Version:2.0.50727.1433
does anyone had any idea on the following codes that i'm facing?i have no ideas what is constraints and i hardly can view my page. In addition to that, i also faced the same problems when i'm trying to change my user password. it eventually managed to change the password but then the changes leads to the failed to enable constraints too. however, the following codes is not related to the change password but the purchase item. Hope someone can help me up! thanks!
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Source Error:
Line 223: SqlDataAdapter2.SelectCommand.ExecuteNonQuery()
Line 224: SqlConnection1.Close()
Line 225: SqlDataAdapter2.Fill(BuyData2)
Line 226: i = BuyData2.BuyView.Count
Line 227: For n = 0 To i - 1
Source File: C:InetpubwwwrootegBuy.aspx.vb Line: 225
Stack Trace:
[ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.]
System.Data.DataSet.FailedEnableConstraints() +19
System.Data.DataSet.EnableConstraints() +519
System.Data.DataSet.set_EnforceConstraints(Boolean value) +31
System.Data.DataTable.EndLoadData() +300
System.Data.Common.DbDataAdapter.FillFromReader(Object data, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue) +260
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +129
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +304
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +77
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) +38
eg.Buy.Page_Load(Object sender, EventArgs e) in C:InetpubwwwrootegBuy.aspx.vb:225
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
Hello there :-)
Kindly help me find the answer on how to enable and disable the identity of a field on a table via SQL Script?
Thanks :-)
Hello guys,
I would like to know how to enable remote connections to my SQLExpress installation? Thank you very much for any help!
Regards,
Fabian
my favorit hoster is ASPnix : www.aspnix.com !
Hello,
I got the error:
______________________
Reporting Services Error
* For more information about this error navigate to the report
server on the local server machine, or enable remote errors SQL Server
Reporting Services
______________________
I saw the answer:
"You could set the "EnableRemoteErrors" configuration value to True in
the ReportServer.ConfigurationInfo database table."
How can I get to the ReportServer.ConfigurationInfo database table?
I am on the reportservice server and I run "reporting services
configuration manager" and the "sql server managment". I didn't saw
that option :(
Where is this configuration?
Any help?
Thanks
How to enable remote connections on TCP/IP?I have just installed for first time SqlServer 2000,and cannot connect from other host via ODBC.I give hostname or address but it does not connect.I checked on my firewall that there is no listenning socketon port 1433 nor 1440 on sqlserver host.I can only connect using "(local)" server in ODBC on sqlserver host.Regards,Mark
View 2 Replies View RelatedHow to enable the SQL to update all fields?
"UPDATE addresses SET "
+ "strCompany='" + strCompany + "',"
+ "Name='" + strName + "',"
+ "strAddress='" + strAddress + "',"
+ " strPhone='" + fields.phone.getText() +
"',"
+ " strHp='" + fields.hp.getText() + "',"
+ " strFax='" + fields.fax.getText() +
"',"
+ " strEmail='" + strEmail + "',"
+ " strStart='" +
fields.start.getText().trim() +
"',"
+ " intDay= '" + Integer.valueOf(dd) +
"',"
+ " intMonth='" + Integer.valueOf(mm) +
"',"
+ " intYear='" + Integer.valueOf(yy) +
"',"
+ " strMrc='" + fields.mrc.getText() +
"',"
+ " strIsp='" + fields.isp.getText() +
"',"
+ " strDes='" + fields.des.getText() +
"',"
+ " strSale='" + fields.sale.getText() +
"',"
+ " strContract='" +
fields.contract.getText() +
"',"
+ " strMark='" + fields.mark.getText() +
"'"
+ " WHERE strCompany='" + strCompany
+ "'"
+ "AND strName='" + strName + "'";
Hi,
I'd like to know how can I setup the SSL so I can secure my HTTP Endpoint.
I saw in the documentation that some settings such as SSL_PORT and PORTS should be set to SSL port number and SSL but I did not find out anywhere where they explain how to enable SSL.
Do we enable SSL the same way we enable it or SQL Server 2005 or does that have to be done through the MMC - Certificates.
I don't have any IIS server running on this server, so I was wondering if IIS is a requirement to generate and import the certificate.
I appreciate your help and comments.
Bruce.
Hi,
Is there a way to allow specific databases access to the CLR. Currently, my understanding is that when this setting is enabled, it applies to all databases within the instance.
Kind regards,
Jan.
I am trying to enable AD HOC queries in SQL Server 2000. I have tried running the following code:
Code Block
sp_configure 'show advanced options',1
reconfigure with override
go
sp_configure 'Ad Hoc Distributed Queries',1
reconfigure with override
go
but I get the following error message:
'DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Configuration option 'show advanced options' changed from 1 to 1. Run the RECONFIGURE statement to install.
Server: Msg 15123, Level 16, State 1, Procedure sp_configure, Line 78
The configuration option 'Ad Hoc Distributed Queries' does not exist, or it may be an advanced option.
Valid configuration options are:'
I am logged in as administrator.
How do I enable AD HOC on this machine?
Thanks
I'm using sp1, tryng to copy from 2005 db to 2005 db, selecting many tables at once, delete target rows on, identity insert ON.
choosing not to optimize for many tables:
Error: 0xC0202009 at Data Flow Task, Destination - table1 [22]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint 'PK_table1'. Cannot insert duplicate key in object 'dbo.table1.".
Error: 0xC0202009 at Data Flow Task, Destination 3 - table2 [226]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Etc., for each table
Optimizing for many tables:
Error: 0xC0202009 at {AB2253E6-28B4-4D5A-B843-236F8E53E075}, OLE DB Destination [2]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint 'PK_table1'. Cannot insert duplicate key in object 'dbo.table1.".
Information: 0x402090E0 at {AB2253E6-28B4-4D5A-B843-236F8E53E075}, OLE DB Destination [2]: The final commit for the data insertion has ended.
When I drop and recreate the tables manually and set 'identity insert on' it doesn't bring the identity field over AT ALL.
I like that MS has tried to make it easier to move many tables at once by allowing us to set 'enable identity insert' to everything at once, but it doesn't appear to work. ( I've been puzzling over how it could work, anyway...)
Before sp 1, I had to go into each table by clicking the 'edit' button, and it would bring the correct identity value over, but the tables would no longer have the identity property on that field.
I have also tried 'run as a transaction' to no avail...