Error 17824 - Aborts My Script In The Middle Of Loop
Dec 18, 1998
Hi,
I´m running the script below:
DECLARE @DTstart SMALLDATETIME, @DTend SMALLDATETIME
SELECT @DTstart = "980801", @DTend = "980810"
SELECT ' processing from ', @DTstart , ' to' , @DTend
SELECT GETDATE(), 'start LOOP'
DO WHILE @DTstart <= @DTend
BEGIN
exec p_pmp_charg_unif_csg @DTstart
WAITFOR DELAY "00:01:00"
SELECT @DTstart = DATEADD(DAY,1,@DTstart )
END
SELECT GETDATE(), 'start LOOP'
I´m having the following problem with SQL 7.
When running the loop, all in a sudden it stops - there´s no
error message on result.
But checking out the current error log, I´ve found the error 17824
reported .
According to the BOL, this error is related to 'priority boost' and
troubles in connection between server and client.
This SQL server 7 has the following configuration:
- 128Mb of RAM, and SQL7 can use from 0 to 128MB
- boost SQL Server priority on Windows NT
- maximum concurrent user connection is 0
Is there someone that had similar problem in SQL 7?
Hi, I have a Visual C app that has been running for about 7mos with SQL Server. Five workstations are accessing the database and they all have licenses. Today one of the machines stated getting a file buffer read error when they tried to add a record to a specific table in the database. When I checked the SQL Error Log this is what I found
Error 17824 Severity 10 State: 0 Unable to write to ListenOn connection `pipesqlquery`, loginname `Eagle`, hostname `Dispatch_1`
OS Error: 109 the pipe has been ended.
All the other workstations are still operating normally...only this one generates the error. Does anyone have any idea of what could be causing this?
I just started receiving the following error on 12/21. Any idea what it is caused by?
Error: 17824, Severity:10, State:0 Unable to write to Listenon Connection '1433', Loginname 'Toni', hostname''. OS Error:64, The specified network name is no longer available. Error: 1608, Severity:21, State:2 A network error was encountered while sending results to the front end. Check the SQL Server Errorlog for more information.
Had to rebuild SQL server and restored SMS databases ok. But the following msgs have appeared - any clues. All help appreciated.
99/08/16 16:38:30.75 ods Error : 17824, Severity: 10, State: 0 99/08/16 16:38:30.75 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname ''. 99/08/16 16:38:30.75 ods OS Error : 232, The pipe is being closed. 99/08/16 16:38:30.77 spid16 Error : 1608, Severity: 21, State: 2 99/08/16 16:38:30.77 spid16 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
I searched and found similar questions on this forum, but nothing quite fits my situation. When I try to run the SQLCMD per the instructions given on the 2nd page of the Guided Tour, the command aborts with the following message. HResult 0x2, Level 16, State 1Named Pipes Provider: Could not open a connection to SQL Server [2].Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired. I had to run the command from the command prompt window by manually navigating to sqlcmd's subdirectory to see this message. Using the Run window results in the command window closing before the message can be read. I tried using both my machine name and "localhost." Same result. What is a local vs. remote connection? How could I perform this via a local connection, assuming that's the problem? Or how can SQL Express be configured to allow the remote connection? Did I do something wrong on the install?
My client has received errors 1608 and 17824 from the SQL Server 6.5 server recently. I am looking for a more definitive answer as to what the error means and how do we correct the problem. I understand that there may be a network problem but where do I start looking?
Hi all , I have a problem using BCP. The execution of BCP proccess stops whenever an error of constraint voilation occurs. What i want is that the BCP should log the errors and continue the execution.
The manuals states that the errors are logged into the file specified during bcp and proccess continues. Whereas the same thing is not happening here.
I am using SQL Server version 6.5
Please help me out with a solution as soon as possible.
One of my clients has a stored procedure on their secondary server thatcopies a bunch of data from the production server. (Replication willbreak the accounting software, according to its authors. The productionserver generates a nightly full backup, so if the secondary can bescripted to do a nightly restore from that same file, then that wouldprobably be a Big Win.)Anyway, if I execute the stored procedure from Query Analyzer, itfinishes (after nearly 24 hours) - tested once recently, and I'm sureat least a few times at some point in the past. If I run a SQL ServerAgent job that executes the stored procedure, then it gets cut off afterabout 15-20 minutes - tested once recently with a manual run, and forseveral weeks of scheduled runs before that. (This being a secondaryserver, it took a while for the problem to be noticed.) What are thelikely causes of this?Both servers are running SQL 2K with SP3, and limited to TCP/IP andnamed pipes. RPC is allowed, with a 600-second timeout, but thatdoesn't seem relevant, since both the successful and unsuccessfulmethods go well past that length. The production server is a recentpurchase, and works well for their daily operations; the secondaryserver and/or its network connection might be flaky for all I know,but that doesn't seem relevant either, since success appears todepend consistently on method of execution.
Does anyone know why a backup database statement aborts a job in a stored procedure so that you can't handle the error with @@error, but when you run the same stored procedure in a query window the error handling does get run?
Hi - I hope some of you can help me with this problem.
I'm trying to run the snapshot agent for 77 published tables, but the agent stops suddenly uninterrupted. It stops in the middle of taking a snapshot of a table containing 81,719,531 rows. The error message is pasted below.
Message 2006-06-14 05:33:33.53 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57200000 total rows copied) 2006-06-14 05:34:12.57 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57300000 total rows copied) 2006-06-14 05:34:51.23 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57400000 total rows copied) 2006-06-14 05:35:29.99 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57500000 total rows copied) 2006-06-14 05:36:09.82 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57600000 total rows copied) 2006-06-14 05:36:49.38 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57700000 total rows copied) 2006-06-14 05:37:28.56 [89%] Bulk copied 100000 rows from "ORAMSSQLREPL"."HREPL_ARTICLE_21_21" (57800000 total rows copied) 2006-06-14 05:37:35.36 [89%] The replication agent was shut down in response to an abort request.
Does anyone know what is causing this error and how I can possibly solve it?
i was created one local variable I with string =null in the collection i was selected the FOLDER (images_ForEach) int the Fiels Columns i was choosen (*.gif)
i was created the table(TEMPS)
SN varchar(10) Unchecked SNAME varchar(250) Checked
IN that for each loop i was placed the sql Task controle with the fallowing expression Working Fine
"INSERT INTO TEMPS ( SN,SNAME ) Values ('" + replace(right(@[User::I], 10), ".gif", "") + "','" + @[User::I]+"')"
for example in temp table RCOUNT COLUMN exist like SN varchar(10) Unchecked SNAME varchar(250) Checked
RCOUNT NUMERIC(9)
1) is it require to take the local variable with count init32 then what to do how to increment the values i tried in Variable mapping it THROWS an Error so please rectify the dought
I have a For Each Loop which selects files with a certain naming convention, performs a data transformation on each one, loading it into a SQL Server db.
I want to add error handling so that if a file fails processing at any step of the loop, error handling moves the file to a new directory and picks up the next file and continues processing.
I tried playing around with error handling at the For Each Loop level. But when the process failed on a file (with an incorrect format), the file couldn't be moved because it was "locked by another process."
Is this possible within a For Each Loop? If not, what other approach could I take?
Hi, I have a "Data Flow Task" inside" For Each container". Data flow task is processing file and updating the DB. If one of the file is correpted i want to move to error folder and continue with the next file. i have given red arrow to a script Task which move the file to error folder. but its not continuing with next file. how can Ido that? Any help
I am new to using SSIS and need some assistance. I am trying to create a package that will loop through a folder of DBF files and import them into SQL server. Here is what I did so far: - Created a Foreach Loop Container with a Data Flow Task within - Created a string variable to store the file names - Created the OLE DB Source and Destinations - Created the connection manager with dBASE III Extended Property pointed to the folder where the files are.
When I try to set the OLE Source to use the file name variable, I get an error stating that there is no Destination table defined. I get the same error when I try to setup the OLE Destination. How do I resolve this issue? I want it to import each file into its own table. Is there any way to reuse this file name variable as the destination table name?
I everyone, I'm learning SSIS from a book but the most simple example is not working. The "For each task" I assigned "xyz" as name. I added a variable onto the "variables" window and called it "counter" Its scope was set to "xyz". Inside the "for loop" ("xyz") editor i assigned values as follows: "initexpression"-"@counter=0" "eval expression"-"@counter<5" "assign expression"-"@counter=@counter+1"
I added "Script task" onto the "For each" container and into the "Script task editor" I assigned the following values: "ReadOnlyVariables"-"counter" Its design script is set to:
Imports System Imports System.Data Imports System.Math Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain Public Sub Main() Dim variables As Variables If Dts.Variables.Contains("Counter") = True Then Dts.VariableDispenser.LockOneForRead("Counter", variables) End If
MsgBox("You are in iteration: " & CStr(variables("Counter").Value)) Dts.TaskResult = Dts.Results.Success
End Sub End Class
Runnig it i get the following error message:quote: "DTS Script task has encountered an exeption in user code: Project name:ScriptTask_e7d98dbad0de4041bcdc9079a5c2fa65 Object reference not set to an instance of an object.." The line where the error occurs is from within the above script: "MsgBox("You are in iteration:" " & CStr(variables("Counter").value)) Anyone understands what that means? What is "object reference" and how do i set it to an instance of an object? Thanks
Inside of a for each loop (looping through an ADO record set of objects to import) I have a data flow task (along with many other processes).... if the dataflow task suceeds I log success in a table. If it errors I want it to fail the dataflow task (which will fire off my Event Handler for that data flow and log the failure, email etc) BUT I want it to continue the loop - I can't seem to figure out how to get the data flow object not to fail the whole loop. If any other objects inside the foreach, other than the data flow, fail I would like the whole loop to fail. Also if possible (but not a requirement) I would like it to have a threshold where if the data flow fails X variable times it will fail the package.
I am having difficulty how to not fail the loop when the import data fails..... just looking for a simple "on error next" type logic for that specific object in the foreach but not the rest. Thanks in advance for the help/advice.
I am developing a package using SSIS which needs to do the following.
1. Read all flat file from a folder. I am doing this using For Loop task. I know the total number of files in that folder hence I am setting the loop counter = file count.
2. The next step is to import the data from flat file to SQL server destination table using data flow task.
3. Upon successful completion of data flow task there are some other tasks like SQL to do some checks/validation on the data, export it to another tables.
Upon successful completion of step 3 the iteration goes to next file.
I want to achieve the following
IF step 2 has error (for example corrupt file or incomplete data), I want to fail data transfer completely, skip step 3, and go to step 1 for next available file and do rest.
I everyone, I'm learning SSIS from a book but the most simple example is not working. The "For Loop task" I assigned "xyz" as name. I added a variable onto the "variables" window and called it "counter" Its scope was set to "xyz". Inside the "for loop" ("xyz") editor i assigned values as follows: "initexpression"-"@counter=0" "eval expression"-"@counter<5" "assign expression"-"@counter=@counter+1"
I added "Script task" onto the "For each" container and into the "Script task editor" I assigned the following values: "ReadOnlyVariables"-"counter" Its design script is set to:[code] Imports System Imports System.Data Imports System.Math Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain Public Sub Main() Dim variables As Variables If Dts.Variables.Contains("Counter") = True Then Dts.VariableDispenser.LockOneForRead("Counter", variables) End If
MsgBox("You are in iteration: " & CStr(variables("Counter").Value)) Dts.TaskResult = Dts.Results.Success
End Sub End Class [/code] Runnig it i get the following error message:
DTS Script task has encountered an exeption in user code: Project namecriptTask_e7d98dbad0de4041bcdc9079a5c2fa65 Object reference not set to an instance of an object.. The line where the error occurs is from within the above script: [code] "MsgBox("You are in iteration:" " & CStr(variables("Counter").value))[/code] Anyone understands what that means? What is "object reference" and how do i set it to an instance of an object? Thanks
Hello all!This might be a newbie question, and there might be something Im just not thinking of right now, but I have a set of values that I need to get the average of but only from the middle 90%. Example:11 <-From here1234456 <- To here.7I thought I could solve it by subqueries and do the following:Select (((Select sum top 5 order asc) + (Select sum top 5 order desc)) - sum total)/rows*0.9 which would give me what I want, but I realised that when aggregating I cant order the subqueries.This is for an application (that will run the query on a sql-server) that only takes one query (although subqueries should be fine), and thats why I have a problem, I cant build any views or things like that.I guess my question is very simple: How can I get a sum of the bottom 5 percent without sorting descending?
I come before you seeking assistance on a package that basically flows very much like the "Table Driven foreach Loops" example provided by Kirk Haselden at http://sqljunkies.com/WebLog/knight_reign/archive/2005/03/25/9588.aspx
I am presently encountering the following exception:
Error: 0x3 at Shred the contents of the variable: Variable "User::FullResultSet" does not contain a valid data object
Warning: 0x80019002 at Shred the contents of the variable: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at DW CUST_CNCL_ORDhardcodedate: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
I'm writing a page that will return data from my database to the user based on their search paramaters, over several pages with 20 matching records showing per page, and a next button on the bottom. Similar to the format of any search engine. However, I'd like to write this into the query, and I'm not sure how I would go about doing so. For example: "SELECT TOP 20 to 40 * FROM Northwind" Hopefully this makes sense. Is there any way of doing this? Thanks in advance,Russ
I am trying to concatenate three fields into one in a View. I have the following data: Last Name First Name Middle Initial (can be null)
I need my resultant field data to look like the following: "Doe, John P."
I'm having a problem writing SQL that is sensitive to placing the period after the middle initial only if there is a middle initial present. If there isn't a middle initial, I just want the following: "Doe, John".
I have tried the following CASE statement:
CASE WHEN middleInitial IS NOT NULL THEN ' ' + middleInitial + '.' ELSE '' END
However, I get an error indicating that the CASE statement is not supported in the Query Designer.
How can I resolve this problem in a View? Is there a function similar to ISNULL(middleInitial, '') that would allow for the "."?
Lets say I have a column of type varchar and need to extract an integer value from the middle of it. The string looks like this:'this part is always the same' + integer of varying length + 'this part is different but always the same length'Is there a way to trim the constant string lengths from the beginning and end?
So I have this query where i need to get the average date of about five different dates... Is there any way to do this or am I screwed. I looked at using the avg function but SQL server 2005 did not like that.
I need to display the middle initial from a name field that contains the last name, comma, and the middle name or initial.
Example data:
Jane,Smith Ron John,Dow L Mary Jane,Dow Welsh
The result I am looking for is to capture only the first letter of the middle name. In this data example, I would need to display the following on a separate column:
