Error: 25 - Connection String Is Not Valid -- HELP Please!
Jul 25, 2006
I have been having a problem trying to connect to a SQL Server. I have installed the Developer edition on an MS Small Business edition 2003 server
I also installed MS Sql Manager and I was able to create a database and connect to it. The database server is in the same PC. I used the surface configuration to enable remote connections using TCP /IP and pipe lines.
My application runs without a problem on my development machine but when I deployed on this server I get the provider: SQL Network Interfaces, error: 25 - Connection string is not valid Error.
I have google and yahoo this error I found a lot of information I've tried many of them but still having the problem. I will appreciate your help solving this problem. I have a customer waiting since last week to see this site and I'm still stuck.
Tia
Charles
PS. Below I pasted the complete error info I get.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734995
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162
System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107
DiamondTableAdapters.COUNTRIES_TEMPLATETableAdapter.GetContriesTemplate() +108
I have installed SQL Server 2005 Developer edition. When I open SQL Server Management Studio, and try to connect to the database engine, I enter these credentials:Server name: LT2000MSSQLSERVERLogin: saPassword: my passwordWhen I try to connect I receive the following error:An error has occured while trying to establish a connection to the server. When connecting to SQL server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider: sql network interfaces, error:25 - connection string is not valid)(Microsoft SQL Server, Error:87)What can I do?
hi i am working with Asp.net2.0,Sqlserver2000. i uploaded my developed application to the webserver. all webpages are opening..bt when i try to interact with database it is raising error as following..
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
i set Enamble to namedPipes,Tcp/IP i set Remote connection to enable
my web.config looks like this.. <?xml version="1.0"?> <configuration> <appSettings> <add key="cn" value="User ID=redot;Password=redot;Data Source=216.185.43.148:1423;Initial Catalog=redot" /> <!--<remove key="LocalSqlServer"/> ;ProviderName=System.Data.SqlClient-->
<sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=216.185.43.148:1423;User ID=redot;Password=redot;Trusted_Connection=True" cookieless="false" timeout="60" /> <compilation debug="true" /> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. -->
I've build a website with asp.net and on my local machine it run very we. but when I store my website on a server, I have a error : ...error: 25 - Connection String not valid... This is my connection string on my local machine : "add name="csIyp" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|iyapason.mdf;User Instance=true" providerName="System.Data.SqlClient" " And the connection string on my webserver : "add name="csIyp" connectionString="data source= .MSSQLSERVER;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|iyapason.mdf;User Instance=true" providerName="System.Data.SqlClient" " So, what can I do to solve this probleme. Thanks !
hi all, i'm trying to insert the time/date a button was clicked on a gridview and it generates an error:the string was not recognized as a valid DateTime.There is an unknown word starting at index 0 i have changed the culture to en-US but it still doesn't work. i actually created the date/time column after some data had been entered into the table so the column allows nulls. this is my code:InsertCommand="INSERT INTO test101(Surname,Names,Registration,Login Time)VALUES (@Surname, @Names, @Registration,@Login_Time)"<Insert Parameters><asp:Parameter DefaultValue= DateTime.Now Type=DateTime Name="Login_Time" /></Insert Parameters>any suggestions?
Scenario Configuration : VB.net 2005 Code, WebService for Executing SSIS on Server, SSIS deployed on the Database Server
Problem Description : We are developing windows applicaiton in which we call webservice which was deployed on the same server where SSIS packages are deployed. Now from Code we are passing FilePath name in variable and execute the Package. But the SSis result says that The file name "\computernamefol1fol2fol3fol4abc.txt" specified in the connection was not valid.
More Information:
1. Full Permission are given on this network folder. 2. Package executes successfully from SSIS development solution (BIS solution) 3. Deployed packed executes successfully from the Database Server. 4. From Development pc packege executes successfully. 5. Other packages deployed on the same server executed suucessfully with same configuration and scenario.
Only this package is not executing.
-- the only differece with this package with other is -
using ".txt" extension in Flat file connection and using VB Script task
Can any one suggest the appropirate solution for this problem...
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
Hello I need some help please. I created a connection string in my web config. I then tried to call it in one of my c# pages but I get a "System.InvalidOperationException: Instance failure" every time I run it. Please review my code and let me know what I am doing wrong. Thank you in advance for all the help Web Config <appSettings>
<add key="AVConnection" value="Server=Server; Database=DB; User ID=sa; Password=PWD" /> </appSettings> //////calling connection and running a simple SQL statment/////// protected void Page_Load(object sender, EventArgs e) { string ConnApp; ConnApp = System.Configuration.ConfigurationManager.AppSettings["AVConnection"]; Response.Write(ConnApp);//the string is being passed this far SqlConnection objConn = new SqlConnection(ConnApp); SqlCommand sqlCMD = new SqlCommand("Select * FROM Employee", objConn);
objConn.Open();//this is where the error occures SqlDataReader objRdr = sqlCMD.ExecuteReader(); Repeater1.DataSource = objRdr; Repeater1.DataBind(); objConn.Close(); objRdr.Close();
Hi, I'm very new to SQL server so please excuse. Basically I'm trying to connect 6 text boxes on my web form to my sql database using c#. The following lines of code behind my save button pops up with this error. "NullRefernrenceException was unhandled by user code - Object reference not set to an instance of an object". I think its something small but as I said I'm only new so I dont have much of a clue. protected void btnSave_Click(object sender, EventArgs e) { String strConn = ConfigurationManager.ConnectionStrings["conLocalDatabase"].ConnectionString; SqlConnection dbConnection = new SqlConnection(strConn); SqlCommand dbCommand = new SqlCommand(); SqlDataReader dbReader Any help would be much obliged.
hi, i am facing a problem:"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"my web config code is <connectionStrings> <add name="ConnectionString" connectionString="Data Source=.kindleinfotech.com;AttachDbFilename=|DataDirectory|database.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" /> </connectionStrings>here kindleinfotech.com is the name of server.how this problem can be solved.
Hello all First Problem: I tried to get the connection string from web.config using Configuration manager -------------code------------------ ConfigurationManager.AppSettings("MyProBD"); -------------code------------------ the below error was occurred -------------Error------------------ Error 1 The name 'ConfigurationManager' does not exist in the current context-------------Error------------------
Second Problem when declare connection string in the code -------------code------------------string strConnection = "Data Source=(local); Initial Catalog=MyProDB; Integrated Security=SSPI;"; con.ConnectionString = strConnection; -------------code------------------ the below error was occurred -------------Error------------------ An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) -------------Error------------------
OK - I have seen lots posted on this, but the behavior is very strange, and I am trying to understand: I am using Visual Basic 2003 with SQLEXPRESS 2005 to connect to a database and to develop a desktop application. My connection string is:
"An attempt to attach an auto-named database for file C:Documents and SettingsBrianMy DocumentsCompressor Program DevelopmentinCWW.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
However, if I copy the database to anywhere else on the "c:" drive, the connection works, as in the following:
What I have found is that ist works everywhere on my computer except in the following location:
"c:documents and settingsBrian", which includes My Documents, Desktop folders.
Why is this??
Any help would be great - I can work around this by moving my development folder to the "c:" drive. Since my ultimate application directory will be the "Program Files" directory I should be fine.
Hi,I am getting this error: String was not recognized as a valid DateTime.I'm trying to insert data into a table from a gridview, where two of the dates can be empty strings.I have set 'allow null' in the SQL Server table for the two dates, added the culture in the web.config file, and even tried converting the values to DBNull.None of which have worked, and I am still getting the error.This is the code I am using: if (e.CommandName == "EmptyInsert") { if (Page.IsValid == true) { TextBox txtVisitDateIns = GridView2.Controls[0].Controls[0].FindControl("txtVisitDateIns") as TextBox; TextBox txtNextVisitDateIns = GridView2.Controls[0].Controls[0].FindControl("txtNextVisitDateIns") as TextBox; TextBox txtVisitedByIns = GridView2.Controls[0].Controls[0].FindControl("txtVisitedByIns") as TextBox; DropDownList ddlPriorityIns = GridView2.Controls[0].Controls[0].FindControl("ddlPriorityIns") as DropDownList; TextBox txtMailshotDateIns = GridView2.Controls[0].Controls[0].FindControl("txtMailshotDateIns") as TextBox;
if (txtNextVisitDateIns.Text == "") txtNextVisitDateIns.Text = DBNull.Value.ToString(); if (txtMailshotDateIns.Text == "") txtMailshotDateIns.Text = DBNull.Value.ToString();
SPVisitsBLL visits = new SPVisitsBLL(); visits.AddVisit(Convert.ToInt32(GridView1.SelectedValue.ToString()), Convert.ToDateTime(txtVisitDateIns.Text.ToString()), Convert.ToDateTime(txtNextVisitDateIns.Text.ToString()), txtVisitedByIns.Text.ToString(), Convert.ToInt32(ddlPriorityIns.SelectedValue.ToString()), Convert.ToDateTime(txtMailshotDateIns.Text.ToString())); GridView2.DataBind(); } } I haven't checked txtVisitDateIns to see if it is an empty string as this date is required.Can anyone help?Thanks
Can anybody point me to a list of all valid string formats for passing in datetime variables into SQL server. Ideally I just want to put in a date and not bother with a time
I am passing a string to my stored procedure call where I convert it to a DateTime. I have pasted the relevant code below. My trouble is that prior to execution of the stored procedure an error is thrown "String was not recognized as a valid DateTime". The error does not get thrown when I pass it a date, it only throws it when no date is provided. The page I am using is a form to do a search. The search can allow a date to be entered or left out. How do I catch an empty value in the c# for an invalid datetime and still send the variable to the stored procedure. //////////////////////////// C# Code /////////////////////////////////// Passing the Date to a stored Procedure SqlParameter bdpDateFrom = new SqlParameter("@datefrom", SqlDbType.DateTime);bdpDateFrom.Value = Convert.ToDateTime(thisbdpDateFrom);myCommand.Parameters.Add(bdpDateFrom); ///////////////////////// Stored Procedure Code //////////////////////////////////@datefrom datetimeIF ((@datefrom IS NOT NULL) AND (@datefrom <>' '))BEGIN SET @whereclause = @whereclause + ' AND T1.c330101invoicedate_dt >= ''' + convert(varchar,@datefrom) + ''''END Thank you!
REBOOTED AND sql SERVER iCON APPEARS on the lower desktop Icon bar, open it and it says: Server: JOHN Servises: SQL Server Running \JOHN - MSSQLServer
opened a command prompt at c: and entered osql -S JOHN -U sa -P password and got the 1> reply on the next line
I typed EXIT
I had downloaded two scripts that create Pubs and Northwind SQL databases. I put them in the C: folder
I Typed at c:osql -E -i instpubs.sql
It created the pubs SQL database for me
I Typed at c:osql -E -i instnwinds.sql
It created the nwinds SQL database for me
I closed the command prompt and went to the Administrator Tools in the Control Panel I selected Data OLEDB Selected ADD entered Pubs and used default values for Pubs to create a connection Tested it OK
Then went and ran Visual Studio Net 2003 Checked to see if the pubs and northwind SQL databases where present in the Server Explorer drop down window. I seleced the connect to database Icon and in it's Data Link Properties I entered JOHN for server name pubs for selected database on the server with Provider as MS OLEDB for SQL Service the Icon changed to connected.
I entered this in the code for page_load
Dim MyDS As New DataSet Dim ConnStr As String Dim SQL As String ConnStr = "server=(local)C:Program FilesMicrosoft SQL ServerMSSQLData;database=pubs;Trusted_Connection=yes"
SQL = "SELECT * FROM Titles " & _ "SELECT * FROM Publishers" Dim MySqlConn As New SqlConnection(ConnStr) Dim MySqlAdapter As New SqlDataAdapter(SQL, ConnStr)
'The SqlDataAdapter will automatically open and 'close the SqlConnection MySqlAdapter.Fill(MyDS)
But I can not get this to work it errors out on line:
and get this error: [SqlException (0x80131904): Shared Memory Provider: The system cannot find the file specified. ] System.Data.ProviderBase.DbConnectionPool.GetConnection(Object owningObject) +317
I've tried so many combination with and without user and password, I just don't get it, spent three long days stuck here, can someone help me out.
Note: C:Program FilesMicrosoft SQL ServerMSSQLData Is the accual location on my machine that pubs database is located.
I can use the pubs SQL database in Web Matrix OK. Thanks pdqjohnny@hotmail.com
Hi.. Please help me resolve this error "Cast from string 'OPEN' to type 'Double' is not valid.". Error here If CallStatus = 10 Then ....Code:Public Sub UpdateCallStatus() Dim CALLID, RequestorID, CommentsFromITD, MessageFromITD, MessageToITD, CallStatus, strSQL As String CALLID = Request.QueryString("CallID") RequestorID = Session("USER_ID") CommentsFromITD = lblcomments.Text MessageFromITD = lblmessage.Text MessageToITD = txt_desc.Text CallStatus = Trim(Request.Form(ddl_callstatus.UniqueID)) Dim ObjCmd As SqlCommand Dim ObjDR As SqlDataReader Try If CallStatus = 10 Then strSQL = "UPDATE CALLS SET STATUS_ID=" & CallStatus & " WHERE CALL_ID= " & CALLID & "" ObjCmd = New SqlCommand(strSQL, ObjConn) ObjConn.Open() ObjDR = ObjCmd.ExecuteScalar() gbVariables.insertuserevents(CALLID, RequestorID, "Call Closed") Response.Redirect("UserCallClosed.aspx") ObjConn.Close() Else strSQL = "UPDATE CALLS SET STATUS_ID=" & CallStatus & " WHERE CALL_ID= " & CALLID & "" ObjCmd = New SqlCommand(strSQL, ObjConn) ObjConn.Open() ObjDR = ObjCmd.ExecuteScalar() ObjConn.Close() strSQL = "SELECT STATUS_LABEL FROM STATUS WHERE STATUS_ID = " & CallStatus & "" ObjCmd = New SqlCommand(strSQL, ObjConn) ObjConn.Open() ObjDR = ObjCmd.ExecuteScalar() ObjConn.Close() gbVariables.insertuserevents(CALLID, RequestorID, CallStatus) CallStatus = "" End If Catch ex As Exception lblmsg.Text = ex.Message.ToString End Try End SubThanks...
Error: The variable "$Package::LocalConfigDB_ConnectionString" was not found in the Variables collection. The variable might not exist in the correct scope.
Error: Attempt to parse the expression "@[$Package::LocalConfigDB_ConnectionString]" failed and returned error code 0xC00470A6. The expression cannot be parsed. It might contain invalid elements or it might not be well-formed. There may also be an out-of-memory error.
I got this error report "The string was not recognized as a valid DateTime. There is a unknown word starting at index 0." at this line of code in BOLD.
For some reasons the datetime format in the database has the (US datetime format - 05/02/2008 06:40 instead of United Kingdom (UK date time format - 02/05/2008 06:40), as I had planned. I have tried to reformat the database and VB date format and all to no success.Could this be the root of my problems?
Code Snippet Public Class Form1
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If con.State = ConnectionState.Open Then con.Close() con.Open() cmd = New SqlCommand("SELECT REM_NOTE, REM_DATE FROM dbo.MY_CONTACTS", con)
Dim sdr As SqlDataReader = cmd.ExecuteReader While sdr.HasRows = True
Dim newAlert As New Alert(Reminder_data_reader("REM_NOTE").ToString(), DateTime.Parse(Reminder_data_reader("REM_DATE").ToString())) Me.collectionOfAlerts.Add(newAlert)
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report. Following methods i tried in textbox expression but no luck.
Error:[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023  " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ?
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
i cannot seem to get rid of this error. My page works in other functions that have the same syntax and format. just this one doesnt. i tried changing the format but still the same thing. SQL DB is DateTime. Any Suggestions?
Function UpdateException(ByVal qID As String, ByVal exception_Status As String, ByVal completed As String, byval notes as string, byVal Username as string) As Integer dim strDate as date = datetime.now() dim strdate1 as string = strDate.tostring("MM-dd-yy") Dim connectionString As String = "server='servername'; trusted_connection=true; Database='CPD_Reports'" Dim sqlConnection As System.Data.SqlClient.SqlConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "UPDATE [Master_CPD_Reports] SET [Exception_Status]=@Exception_Status, [Completed]"& _ "= @Completed, [Completion_Date]= @Completion_Date, [Username]= @Username WHERE ([Master_CPD_Reports].[QID] = @QID)" Dim sqlCommand As System.Data.SqlClient.SqlCommand = New System.Data.SqlClient.SqlCommand(queryString, sqlConnection)
sqlCommand.Parameters.Add("@QID", System.Data.SqlDbType.VarChar).Value = qID sqlCommand.Parameters.Add("@Exception_Status", System.Data.SqlDbType.VarChar).Value = exception_Status sqlCommand.Parameters.Add("@Completed", System.Data.SqlDbType.VarChar).Value = completed sqlCommand.Parameters.Add("@Completion_Date", System.Data.SqlDbType.varchar).Value = strDate1 sqlCommand.Parameters.Add("@Username", System.Data.SqlDbType.DateTime).Value = UserName dim NotesUpdate as string = "INSERT INTO [CPD_Notes] ([qID], [Notes], [Notes_Date], [Username]) VALUES (@qID, @notes, @Date, @UserName1)" Dim sqlCommand1 As System.Data.SqlClient.SqlCommand = New System.Data.SqlClient.SqlCommand(NotesUpdate, sqlConnection) sqlcommand1.parameters.add("@qID", system.data.sqldbtype.varchar).value = qID sqlcommand1.parameters.add("@Notes", system.data.sqldbtype.varchar).value = notes sqlcommand1.parameters.add("@UserName1", system.data.sqldbtype.varchar).value = Username sqlcommand1.parameters.add("@Date", system.data.sqldbtype.datetime).value = DateTime.now() Dim rowsAffected As Integer = 0 trace.warn(strdate1)
sqlConnection.Open Try rowsAffected = sqlCommand.ExecuteNonQuery Finally End Try
I have an SSIS package that I need to modify. It was developed in Visual Studio 2005 and runs faithfully in production on SQL Server 2005. Suddenly, I can't open the package on my own workstation. I see a big red "X" image and a message stating "Microsoft Visual Studio is unable to load this document." The real reason the document can't be loaded appears to be:
Error loading DataWarehouseLoader.dtsx: The connection type "OLEDB" specified for connection manager "Warehouse Logging OLE DB" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
Does anyone know what causes this and what I can do? The package has been in production for 9 months and I've never seen this problem before.
Hello, I am using an SQLDataReader called DrCoInfo to check if any matching records exist in a table.
My code is as such:
Line 119:DrCoInfo = comm1.ExecuteReader() Line 120:While DrCoInfo.Read() Line 121: If DrCoInfo("DateOfMan") <> "" Then Line 122: BValid = True Line 123: End If
However, it fails to work with the message :System.InvalidCastException: Cast from string "" to type 'Date' is not valid.
Here's my code: Dim Cmd as New SQLCommand(sqlString, conn) cmd.CommandType=CommandType.StoredProcedure Breaks Here ----->>cmd.parameters.add(New SQLParameter(@OrdAlias, OrdNum)) cmd.parameters.add(New SQLParameter(@AliasSourceCode, 4))The error says:compilation error - - then, on the line that is in red:Compiler Error Message: BC30037: Character is not valid.I have 'OrdNum' declared globally, and OrdNum is assigned right away in the Page_Load event. I've checked the spelling of the SQL parameters (OrdAlias is a varchar, and AliasSourceCode is a tinyInt)After all this - then, this code runsAny ideas why I'm getting this error??
Hello Friends How are you?? Friends i am getting problem in SQL Server 2005. I am deployng web application on production server as well as Databse also. In production server i inserted new field in all tables which is rowguid and its type is uniqueidentifier. The default binding for this field is newsequentialid(). In some pages it works ok but in some places it generates error like 'Conversion from type 'DBNull' to type 'String' is not valid'. Can anybody help me to solve this problem. Its urgent so plz reply me as soon as possible. I'll be very thankfull to you. Thanks in Advance. Regards,
I want to set a Report Parameter on a field. The Report Parameter is called 'filter'. In the statement I put the Report Parameter in the WHERE-part: WHERE ([DatabaseName$TableName].[FieldName] = @filter). After this I set the 'Available values' on the Report Parameter in the lay-out to Non-queried. When the report is running, no problems.
But.....
Now I want to set 'Available values' on 'From Query' and refer to the data set, so the user can choose on which value he want to filter. But now, after running the preview the following error displays: Error 1 [rsInvalidReportParameterDependency] The report parameter €˜filter€™ has a DefaultValue or a ValidValue that depends on the report parameter €œfilter€?. Forward dependencies are not valid.
Why can't I set the Report Parameter to 'From Query'? Anyone any suggestions???
(you can see the rest of my statement here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1098540&SiteID=1)
