I would like to send back to MS-DOS (ERRORLEVEL) an error code 2 ( different from 0 and 1) via a scripting Task.
Our package are started with the DTEXEC Utility.
In general, how can i send back a flag saying "There were warnings" during the execution of a Package
We made SSIS package in dev environment in windows 2008R2 and SQL server 2012. Same packages were placed on SAN disks in cluster environment and are invoked with security contexxt of admin user and wih dtexec utility ( we call this using an sp). rarely but procedure completed i see the log text file by SSIS package and find the return code 5 means package is unable to load. i canst found what are the exact reasons for return code 5.
View 2 Replies View RelatedHi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
Hi all,
I have a serious problem with my SSIS Package while executing using 32-bit DTExec and 64-bit DTExec.
Here are the details:
Environment:
Windows Server 2003 64-bit (Build 3790: Service Pack 2)
SSIS 32-bit & 64-bit installed
SQL Server 2005 (Microsoft SQL Server 2005 - 9.00.1399.06 (X64) - RTM)
SSIS Package details (compiled in 64 bit)
Script tasks only
Microsoft Visual Basic .NET (using TRY...CATCH block)
PreCompileScriptIntoBinaryCode = TRUE
Run64BitRunTime = TRUE
Execution
Batch file that uses DTExec to execute the Package.
SCENARIO
I am trying to exeucte the above SSIS package using both 32-bit and 64-bit DTExec to make it failure by providing invalid connection string. Here are the details,
Wrong connection String using 32-bit Execution
While establishing the connection the error message has been nicely captured in to my Exception block and writes into the log file.
Wrong connection String using 64-bit Execution
While establishing the connection the error has not been catpured anywhere (although I have TRY CATCH block) and it haults there itself with the message "Process is terminated due to StackOverflowException". Later I found that the error is due to the connection string along with the unhandled exception.
Please suggest any one of the following my findings, also if you have any other advice would be very much appreciated.
1. Shall I go ahead and fix the issue by handling those unhandled errors? (e.g Appdomain, application). I tried several but still not working using 64-bit DTExec.
2. Shall I go ahead and use 32-bit DTExec to execute the package? If so, is there any other major issue...like performance or anyother bug?
P.S: We cannot apply any service pack for SQL Server 2005 at the moment. Sorry abt it. If you have any specific hotfix for DTExec (without affecting SQL Server) then we can decide.
Sorry for the lengthy one and Thanks very much for you help in advance .
Thanks again!
Suresh
I HAVE an SSIS Pkg that gets data from lotusnotes into SQLS ERVER 2005. This SSIS Pkg works just fine, when I run it from manually from Visual studio environment. However, when I run this as a dtsexec from command line it fails with the foll error" The product level is insufficient for component "DataReader Source(1). The dtexec command I use is :
dtexec /f "c:otesPack.dtsx"
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
For a client i have built an application to give them the possibility to load packages for their data warehouse.
This application starts a database job in SQL Server, which in turn starts a dtsx package. This package loops over the contents of a table and starts the packages that are marked to be executed.
This all work well most of the time. Sometimes though, DTExec, the process running the packages, just stops running. There are no entries in the event viewer or anywhere else.
I run Windows Server 2003 with SQL Server 2005 SE SP1. The packages are run from the filesystem, not the database.
Has anyone encountered the same problem and know a solution? I can't find any info on the internet.
- Matthijs
I'm getting
will not acquire
a connection because the package OfflineMode property is TRUE. When the Offline
Mode is TRUE, connections cannot be acquired."
I'm running the 32bit DTEXEC on a 64bit machine since I'm using the Jet provider.
I see in the forum and other places that this error usually occurs when you try to run in 64bit.
I don't get this error when I've tried it, running the 64bit DTEXEC or when I run from BIDS on a 32bit machine.
Any help appreciated.
David
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
Hi All,
In one of my SSIS package (which connect to DB2) i save the DB2 username and password in SSIS packge itself by using option "EncryptAllWithPassword".
When I try to run the packge using dtexecui.exe it works perfectly fine. It prompts me for package password and then run fine.
Now I am trying to run it using command line dtxece.exe and i get fooolwoing error. Please suggest and help!!!
DTExec.exe /FILE C:pkgDB2Load.dtsx /CONFIGFILE C:ConfigpkgConfigMaster.dtsConfig /Decrypt mypassword /CHECKPOINTING OFF /REPORTING EWCDI
Error Message:
----------------------
Description: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "IBM OLE DB Provider for DB2 Servers" Hresult: 0x80040E21 Description: " SQL30082N Attempt to establish connection fa
iled with security reason "17" ("UNSUPPORTED FUNCTION"). SQLSTATE=08001
"
Thanks
Sid
Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.
If it works from BIDS, should it not work from dtexec.exe on the same box?
Does dtexec run under the security context of the logged in user?
Thanks,
Ken
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 138
----------------------------------------------------------
Failed to read property "InstallIds" {"MachineConfiguration", "", "DUTTONDARRYL1"} from cache
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection:etProperty
Source Line Number: 164
----------------------------------------------------------
Unable to write property into cache: IsClustered
Source File Name: datastoredatastorecacheschema.cpp
Compiler Timestamp: Wed Jun 14 16:28:00 2006
Function Name: DataStoreCacheSchema::writeProperty
Source Line Number: 115
----------------------------------------------------------
Unable
04/24/2007 14:46:48.694 MSP returned 1603: A fatal error occurred during installation.
04/24/2007 14:46:48.790 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
04/24/2007 14:46:48.790 Registry: Cannot read registry key value "Debug"
04/24/2007 14:46:48.806 Copy Engine: Error, unable to install MSP file: c:f01fc31fd0988e3807HotFixSQLFilessqlrun_sql.msp
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
******************************************************
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729
MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp
MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32
MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist
MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603
MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object.
MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending.
=== Logging stopped: 4/24/2007 14:46:48 ===
MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/24/2007 14:46:48 ===
*************************************************************
The Summary.txt looks like this
Time: 04/24/2007 14:46:48.854
KB Number: KB921896
Machine: DUTTONDARRYL1
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Failed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER
Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER
Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER
SQL Server Native Client ENU 9.00.2047.00 x86
Client Components ENU SP1 9.1.2047 x86 DEVELOPER
MSXML 6.0 Parser ENU 6.00.3890.0 x86
SQLXML4 ENU 9.00.2047.00 x86
Backward Compatibility ENU 8.05.1704 x86
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : In Progress
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29527
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Hi,My SQL Server 2005 won't start - can anyone provide some help? Thisseems to be the most significant error:- TDSSNIClient initialization failed with error 0x5, status code 0x51.There was some info here, but the reg key described looks okay:- http://blogs.msdn.com/sql_protocols/I am running SQL Server 2005 64-bit Standard Edition. The server inquestion is the first node of an Active/Active Cluster. This firststarted happening while I was trying to add a share as a clusteredresource of the other node (not to this node's resources).I have not yet reinstalled SQL Server 2005 because I am hoping for moreexplanation of the problem and a possible fix.Thanks,Tom
View 1 Replies View RelatedHi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
View 1 Replies View Related
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
Hello,
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
Hi,
I just installed SQL Server 2005 on Windows Vista.
I am getting an error "An unknown error occurred in the WMI
provider. Error Code 8000000A" when connecting to a web server. The
reporting services is running. Is there any other installation that is
missing. Please help.
Hello everyone.
I am trying to install Project Server, and i'm having issues with sharepoint, and connecting to SQL:
dataserver is running sbs2003 sql2003 and analsys services.
server2 is running server2003 is to be the application server for project.
ProjectDb is the database that i have setup in sql.
username is the account that can control everything as administrer.
in Sharepoint is asks for the database server: <<dataserver>>
SQL Server database name: <<ProjectDb>>
I'm using windoes authentication and then i click ok, and get the error message.
I've also see the error message can not find the SQL Server, and access denied. Under ODBC i have installed the sql server information under System DSN.
Any help would be great.
Thanks
Everett Buel
Hi,After sending a request, I would get the possible error message.Not the code @@error, nor the exact content of sysmessages, but themessage like it could be in the log file.TIA,TSalm
View 1 Replies View Relatedmy code was working fine but i changed a few things and now i cant figure it out.
the problem is that when i click my edit button none of the items go into the listbox. i added a label to track th error and i narrowed it done to a smaller ssection. Please help
//-----------------------------------------------------------------------------
/////////////////////////////////////////////////////////////////////////////////
protected void EditButton1_Click(object sender, EventArgs e)
{
int counter = 0; //counter for inserting into array
bool Validate = checknumberValidation(TextBox1.Text.ToString());
if (Validate == false)
throw new Exception(InvalidCheckNumber + TextBox1.Text);
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
//get # of checkboxes and set array size;
int x = 0;
x = SetStringArraySize(); //set x to number of checkboxes that are checked
String[] updateString = new String[x]; //create string array of size x
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
//for loop that will insert update statements into array
for (int i = 0; i < GridView1.Rows.Count; i++)
{
GridViewRow row = GridView1.Rows[i];
bool isChecked = ((CheckBox)row.FindControl("UpdateCheckBox1")).Checked;
if (isChecked == true)
{
if (counter == 0)
updateString[counter] = "[batchid] = '" + GridView1.Rows[i].Cells[3].Text + "' AND [loanid] = '" + GridView1.Rows[i].Cells[5].Text + "' AND [historycounter]='" + GridView1.Rows[i].Cells[8].Text + "'";
if (counter > 0)
updateString[counter] = "[batchid] = '" + GridView1.Rows[i].Cells[3].Text + "' AND [loanid] = '" + GridView1.Rows[i].Cells[5].Text + "' AND [historycounter]='" + GridView1.Rows[i].Cells[8].Text + "'";
counter++;
}
}
//Add items to listbox and set listbox to visible.
Panel1.Visible = true;
PanelGridView.Visible = false;
Panel2.Visible = false;
updateCount.Text = updateString.Length.ToString();
updateCheckNumber.Text = TextBox1.Text;
int q = 0;
while (q < updateString.Length)
{
ListBox1.Items.Add(updateString[q]);
q++;
}
//Label1.Text = temp.Length.ToString(); //Test print to label
}
//-----------------------------------------------------------------------------
//COMPLETE
protected int SetStringArraySize()
{
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
int count = 0;
for (int i = 0; i < GridView1.Rows.Count; i++)
{
GridViewRow row = GridView1.Rows[i];
bool isChecked = ((CheckBox)row.FindControl("UpdateCheckBox1")).Checked;
if (isChecked == true)
{
count++;
}
}
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
return count;
//returns number of checkboxes that are checked
}
/////////////////////////////////////////////////////////////////////////////////
//-----------------------------------------------------------------------------
Hello, I cannot get this sql query to run:
Insert Into ProcessQueue (queued_url, que_user, dqueued, quepriority, status)
Values ('domain.com', '1000', GetDate(), '5', IF (Select Count(*)
From ProcessQueue
Where Status = '1') > 3
Then '0' Else '1') Im getting: Incorrect syntax near the keyword 'IF'.Incorrect syntax near the keyword 'Then'.Also, Is there anyway to return the value which was placed into the status column to my app for processing or do I have to open a data reader and use another select statment. Thanks!
I have a c++ app that is trying to do an update, we use ADO to SQL7. It's returning error code 3119. Has anyone seen this error before? I didn't find anything in BOL or MSDN.
Thanks,
Brian
I am getting the 207 error code and can't figure out the problem. I have a coldfusion page that is calling a stored procedure. The page allows users to sort the displayed columns and it is passing the column numbers into my stored procedure. I am using a case statement to decide which sort to use.
The error message is: Invalid column name 'SCHOOL'.
I've tried adding single and double quotes here and it worked before I added the case statment when I just type 'order by school'.
Below is some of my code:
SELECT P.NAME,
P.ASORG,
P.MAILSTOP,
P.OFCPHONE,
R.EMPLID,
SCHOOL = S.DESCR,
R.DEGREE_LEVEL,
R.DISCIPLINE,
TEAM = T.TEAM_NAME,
NAT_EVENT = NE.EVENT_NAME,
R.SCHOOL_CODE,
R.TEAM_CODE,
R.EVENT_CODE,
FROM HR_EXTRAS..RECRUITERS R,
HRWH..PS_SCHOOL_TBL S,
HRWH..PERSON P,
HR_Extras..UP_TEAMS T,
HR_Extras..UP_NATIONAL_EVENTS NE,
WHERE R.SCHOOL_CODE = S.SCHOOL_CODE
AND R.EMPLID = P.SNL_ID
AND T.TEAM_CODE = R.TEAM_CODE
AND NE.EVENT_CODE = R.EVENT_CODE
ORDER BY CASEWHEN @SORT = 1 THEN P.NAME
WHEN @SORT = 2 THEN P.ASORG
WHEN @SORT = 3 THEN SCHOOL
WHEN @SORT = 4 THEN T.TEAM_NAME
WHEN @SORT = 5 THEN NE.EVENT_NAME
END
Can anyone offer suggestions?
Error messages:
Source: mscorlib
Target Site: Void WinIOError(Int32, System.String)
Message: Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLReplDatauncServername_ADVENTUREWORKS_ADVWORKSPRODUCTTRANS20070625161637' is denied.
Stack: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, DirectorySecurity dirSecurity)
at System.IO.Directory.CreateDirectory(String path, DirectorySecurity directorySecurity)
at Microsoft.SqlServer.Replication.Utilities.CreateDirectoryWithExtendedErrorInformation(String directory)
at Microsoft.SqlServer.Replication.Snapshot.SnapshotProvider.CreateSnapshotFolders()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: mscorlib, Error number: 0)
I totally followed by tutorials of replication, repldata is new created folder
sharing for windowns accounts like shown below
repl_distribution read
repl_merge read
repl_snapshot Full control
the settting for these accounts same with security setting
any idea about this error?
many thanks
ALTER PROCEDURE copy @row int
AS
GO
DECLARE @firstName isim
DECLARE @lastName isim
DECLARE @age int
DECLARE MyCursor CURSOR FOR Select Ad,SoyAd,Yas FROM Bilgi where Row < @row
OPEN MyCursor
FETCH NEXT FROM MyCursor INTO @firstName,@lastName,@age
CREATE TABLE #tablo(
adınız nvarchar(20) NULL,
soyAdınız nvarchar(20) NULL,
Yasınız int NULL )
while(@@FETCH_STATUS = 0)
BEGIN
INSERT #tablo VALUES(@firstName,@lastName,@age)
FETCH NEXT FROM MyCursor INTO @firstName,@lastName,@age
END
CLOSE MyCursor
DEALLOCATE MyCursor
SELECT * FROM #tablo
GO
When I run the above code snippet, I encounter an error called "Server: Msg 137, Level 15, State 2, Line 5
Must declare the variable '@row'."
How can I fix it ?
HeyASP.NET 2.0 + MS Sql Server 2005 Express (that version which comes with VS2005)This code below fails. The Delete method executes a stored procedure, but somehow this SP fails. The SP shown here is a short version of the actual SP. As you see from the code below, there are no way the Delete method can know if SP executed successfully. I assume I just could have returned @@error, but that just gives an error number, and not the description of the error??.. And how should I capture exceptions like these?? How should code this SP so it report the error??Any suggestions??public override void Delete(System.Guid id, int user){ using (SqlConnection cn = new SqlConnection(this.ConnectionString)) { SqlCommand cmd = new SqlCommand("SendMessage", cn); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.Add("@id", SqlDbType.UniqueIdentifier).Value = id; cmd.Parameters.Add("@user", SqlDbType.Int).Value = user; }}
ALTER PROCEDURE dbo.DeleteMessage @id uniqueidentifier, @user intASBEGIN UPDATE table_A set column_A = 1 WHERE Id = @id; DELETE FROM table_B WHERE Id = @id; IF (@@error = 0) COMMIT TRAN; ELSE ROLLBACK TRAN;END
"SELECT p.ProductID, p.ProductTitle FROM Product p " & _
"WHERE (p.Price > '%" & FormatCurrency(lowestPrice, 2) & "%' AND p.Price < '%" & FormatCurrency(highestPrice, 2) & "%')" & _
"ORDER BY p.ProductTitle"
I have got syntax error in this SQL coding, can someone help me? is it i write it wrongly somewhere? This SQL coding i want to retrieve from database the price range of the product (currency). please help me.. thanks alot
Error displayed on explorer:
Syntax error (missing operator) in query expression 'p.ProductID = pa.ProductID AND (pa.AttributeVal LIKE '%Realism%') UNIONSELECT p.ProductID, p.ProductTitle FROM Product p WHERE (p.Price > '%$80.00%' AND p.Price < '%$100.00%')'.
I have a user that is trying to connect to a database on a SQl 7.0 server and gets
an error 20050. Information that I have says this may be caused by the ODBC Data Source
Name being misconfigured. We checked the configuration on the client and see no problems.
The application is called Maximo and is made by MRO Software.
Anyone have any ideas ?