Hi,
There is an error output from one oledb destination which causes error to another which populated a table called tblFailedRows.
I have mapped the errorcolumn to the errorcolumn in tblFailedRows.
When looking at the errorcolumn in tblFailedRows I see just numbers not the column name.
How do I get the column name that causes the error?
Thanks
ALTER procedure [dbo].[MyPro](@StartRowIndex int,@MaximumRows int)
As
Begin
Declare @Sel Nvarchar(2000)set @Sel=N'Select *,Row_number() over(order by myId) as ROWNUM from MyFirstTable Where ROWNUM
Between ' + convert(nvarchar(15),@StartRowIndex) + ' and ('+ convert(nvarchar(15),@StartRowIndex) + '+' + convert(nvarchar(15),@MaximumRows) + ')-1'
print @Sel
Exec Sp_executesql @Sel
End
--Execute Mypro 1,4 --->>Here I Executed
Error
Select *,Row_number() over(order by myId) as ROWNUM from MyFirstTable Where ROWNUM
Between 1 and (1+4)-1
Msg 207, Level 16, State 1, Line 1
Invalid column name 'ROWNUM'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'ROWNUM
Procedure successfully created but giving error while Excuting'.
Please anybody give reply
Thanks
I have a table in which a non-primary key column has a unique index on it.
If I am inserting a record into this table with a duplicate column value for the indexed column, then what will be the error number of the error in above scenario? OR How could I find this out?
I am getting an error importing a csv file both using SSIS and SSMS. The csv is comma delimited with quotes for text qualifiers. The file gets partially loaded and then gives me an error stating The column delimiter for column "MyColumn" was not found. In SSIS it gives me the data row which is apparently causing the problem but when I look at the file in a text editor at the specific row identified the file has the comma delimiter and it looks fine. I am using SQL Server 2008.
View 9 Replies View Related
Hi everyone,
I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow.
So basically what i want is to control the anormal ending of the csv file.
please can anyone help me ???
I am getting the following error after replacing the '""' with '|'.
The replacng is done becasue some text sting contains "" wherein the DFT was throwing an error as " The column delimiter could not foun".
[Flat File Source [8885]] Error: The column data for column "CountryId" overflowed the disk I/O buffer.
[Flat File Source [8885]] Error: An error occurred while skipping data rows.
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (8885) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
[DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039.
[DTS.Pipeline] Information: Post Execute phase is beginning.
apprecite for immediate response.
Thanks in advance,
Anand
Hello,I am trying to follow along with the Data Access tutorial under the the "Learn->Videos" section of this website, however I am running into an error when I try to use the "Edit -> Update" function of the Details View form: I'll post the error below. Any clues on how to fix this? Thanks in advance!!! ~DerrickColumn name 'Assigned_To' appears more than once in the result column list. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Column name 'Assigned_To' appears more than once in the result column list.Source Error: Line 1444: }
Line 1445: try {
Line 1446: int returnValue = this.Adapter.UpdateCommand.ExecuteNonQuery();
Line 1447: return returnValue;
Line 1448: }
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07
Hi,
I am trying to create a inline function which is listed below.
USE [Northwind]
SET ANSI_NULLS ON
GO
CREATE FUNCTION newIdentity()
RETURNS TABLE
AS
RETURN
(SELECT ident_current('orders'))
GO
while executing this function in sql server 2005 my get this error
CREATE FUNCTION failed because a column name is not specified for column 1.
Pleae help me to fix this error
thanks
Purnima
Good Morning,
Am I new at this so please bear with me. I searched the site and found threads on identifying the meaning of an error code and have instituted that scripting. It is telling me that I have a 'The data value cannot be converted for reasons other than sign mismatch or data overflow.' error. It identifies the colum as 5301.
I searched the threads and found one telling me I could do an advanced editor search on the lineage id to find the column being referenced. I have traced the entire process using this information and cannot find a reference lineage id of 5301. Was that thread information accurate, and if so what do I do now? If not, can someone tell me how the heck I find column 5301? I cannot load my table from a flat file because of this.
Work so far:
I have checked for integrity between column definitions and source flat file. I applied derived column changes to make the data transform to the appropriate data type/order where necessary. This part works without error. (Or seems to, there is no error output from this piece.) It is only on the final attempt to load that the process errors with these messages.
Thank you in advance to anyone who can help me.
Rog
Hello,
I have the following select:
SELECT DDV_DOCENCIA_SERVIDOR.cpf_ddv_servidor,
ape_serie.nome as nome_serie,
(select sum (carga_horaria) from (select case
when APE_COMPOSICAO_ENSINO.codigo IN (143,203,208,443,503,508) THEN (APE_QD_CURRICULAR_disciplina.carga_horaria / 20)
when APE_COMPOSICAO_ENSINO.codigo IN (141, 199) then (APE_QD_CURRICULAR_disciplina.carga_horaria / 40)
else 30
end ) as carga_horaria )
FROM DDV_DOCENCIA_SERVIDOR
INNER JOIN... (and there it goes..)
The problem is in the part where I do the sum... it returns me the following error:
"No column was specified for column 1 of 'carga_horaria'."
It seems to be complaining about somewhere where I should have given a name to something... but I just couldn't figure where.
I also plan to do I group by "nome_serie" at the end of it, but I must resolve this problem first.
I am trying to delete a duplicate row in a table and get the following message:
"Key column information is insufficient or incorrect"
"Too many rows were affected by update"
The table does not have any indexes or keys defined.
How can I delete the row?
Thanks,
Ken Nicholson
Hi,
I'm converting the SQL statements from Oracle to MS SQL Server in the Java program.I'm getting the following error :
java.sql.SQLException: No such column count(*)
at the LAST STATEMENT of the following piece of code -
strQuery = "Select count(*) from PS_FISC_PNLG_LIST";
rset = m_databaseConnector.execQuery(strQuery);
if(rset.next())
nCnt = Integer.parseInt(rset.getString("count(*)"));
Whats the correct substitute for this stmt in SQL Server? Please help.
Hi,
Using SSIS, while importing (source i.e. .csv into destination i.e. sql server table), how is it possible to log the source COLUMN which causes the error in the row?
Thanks
For some reason my primary key, identity column skipped a couple of numbers. It went from row 734 to 736, 737, 739
Any ideas why this would happen?
thanks
hi,
As i have created a table with a identity column and now i am using a procedure to insert the values into that table....but when i execute it it gives an err saying err converting varchar data to int and also on the asp.net ......plz help me out for the procedure and the using it with sqlcommand in .net.
create table demo2(id int identity(1,1),name varchar(20))
create procedure sp_demo2
(@id int,@name varchar(20))as begin
insert into demo2(name) values(@name)
set @id=@@identity
end
exec sp_demo2 'j'
thanks,
rajiv
Hi;
I am getting this error while I am trying to delete a record from "MediaTypes" table
Media Types table and DVBTestCOutputs table have related through MediaID (cascade on update only not delete)
MediaTypes DVBTestCOutputs
------------- ---------------------
MediaID int ..........................
MType char(10) ..........................
MediaType int
DELETE statement conflicted with COLUMN REFERENCE constraint 'FK_DVBTestCOutputs_MediaTypes1'. The conflict occurred in database 'Test', table 'DVBTestCOutputs', column 'MediaType'.
can you help me please I do not want the related record deleted also from DVBTestCOutputs table so I didn't choose the cascade on delete checkbox is this the problem??
Hello all,
Does anyone see anything wrong with the sql query below
DECLARE @BUILDINGLIST nvarchar(100)
SET @BUILDINGLIST = 'ALABAMA'
DECLARE @SQL nvarchar(1024)
SET @SQL = 'SELECT id, CLOSED, building AS BUILDING FROM
requests WHERE building = (' + @BUILDINGLIST + ')'
EXEC sp_executesql @SQL
I keep on getting the following error:
Server: Msg 207, Level 16, State 3, Line 1
Invalid column name 'ALABAMA'.
Thanks in advance.
Richard M.
Table : Department
Col :
Department ID
Name
Description
CREATE PROCEDURE GetDepatmentID AS
SELECT Department ID, Name
FROM Department
RETURN
Trying to create strored procedure and get the error that "Department" column does not exist.
Please know verily new to this so have patience
Hiya!
I have a static, optimistic ADO recordset in VB6 selecting rows from a view definition which selects fields (includes all primary keys!) from two tables using a right join on the table whose fields I absolutely need. My update affects only one table (the right one), yet I am getting an error "Insufficient key column info for updating or refreshing", NativeError is 1007, which does not match any SQL error in BOL, and source gives me Microsoft Cursor Engine, although my cursor type is fine for updating. Any clues?
Thanks,
Sarah
Hi
When i create a temp table with a field as blank string as in following example and then try to insert a blank string int it following error is coing.
compatibility level of database is 70
following is the example
Select CtpId = convert(int, a.CtpId), a.OrgId, a.Sname, a.Intls, a.Prfx, a.CallName, a.Sex, a.RspblEmp,
City = convert(char(40), ''), OrgDescr = convert(char(46), ''),
a.ActvtyStatus, a.Sales, a.SaleCntct, a.ContractCntct, a.ContractSigner,
a.CRW, a.WkndCntct, a.UseOrgAddr, CtpTimeStamp = convert(int, a.TimeStamp), FrequentFlyer = convert(bit,0) ,
a.PrevCmpl, b.St, a.DtIns
into #Ctp
from tbCtp a, tbAddr b
where 0 = 1
Select a.CtpId, a.OrgId, a.Sname, a.Intls, a.Prfx, a.CallName, a.Sex, a.RspblEmp,
City = '', OrgDescr = '',
a.ActvtyStatus, a.Sales, a.SaleCntct, a.ContractCntct, a.ContractSigner,
a.CRW, a.WkndCntct, a.UseOrgAddr, CtpTimeStamp = convert(int, a.TimeStamp),FrequentFlyer = 0, a.PrevCmpl,
St = "", a.DtIns
into #CTP
from tbctp a
where a.Sname like 'as%'
and CallName = '%'
ERROR MESSAGE:: Server: Msg 2731, Level 16, State 1, Line 1
"The width of column 'City' is 0. This width is not valid."
Please tell why this error is coming.
Thanks in advance
Rajesh
Cannot add functions like:
iif("dbo"."FACT_Sales_order_transaction"."DeliveredQty" > 0,1,0)
on the Source Column property on a measure in my cube.
Get error "the column is not valid"
I'm sure it's a valid name !
I have a measure called so and
commands like "dbo"."FACT_Sales_order_transaction"."DeliveredQty"- "some other measure" works fine.
It works fine if I try the same on the Tutorial Sales cube:
iif("sales_fact_1998"."store_sales" > 0,1,0)
Only difference is "dbo"... Should work on SQL-server also ???
This is my syntax, I have removed then added back line by line by line and determined it is the insert of the variable into the table that skews.
Code:
Create Table #Table1 (ID Int Identity, p nvarchar(20))
Create Table #Table2 (date datetime, salesID int, p varchar(20))
Insert into #Table1 Values ('ZeroWireless')
Declare @Str nvarchar(4000), @p nvarchar(20)
Select @p = p
From #Table1
[code]....
The reference to QReceived below in the QUsageQty line gives me an error: Invalid Column Name 'QReceived'. Is there a way to reference that field?
SELECT
MEND.ProductID,
MEND.MEPeriod,
MEND.OpeningQty,
QOpenCost = MEND.OpeningDols / MEND.OpeningQty,
(SELECT Sum(UsageQty) FROM tblShipmentHdr SHPH WHERE MEND.ProductID = LEFT(SHPH.ProductID,7) And
DATEADD(mm, DATEDIFF(mm,0,SHPH.ReceivedDate), 0) = MEND.MEPeriod GROUP BY LEFT(SHPH.ProductID,7)) AS QReceived,
QUsageQty = MEND.OpeningQty + QReceived - MEND.ClosingQty,
PROD.ProductName
FROM tblMonthend MEND
LEFT OUTER JOIN dbo.tblProducts as PROD ON MEND.ProductID = PROD.ProductID
WHERE (MEND.MEPeriod =''' + convert(varchar(40),@XFromDate,121) + ''')
Hi,
I am getting an ambiguous column name error, but I am aliasing the column in question. The problem seems to be that I'm trying to use the same column in 2 inner joins:
select trackprice.id from trackprice tp
inner join track tr on tp.trackid = tr.id
inner join trackstorage ts on ts.trackid = tr.id
inner join ... etc ....
.... gives me the error 'ambiguous column name trackid' - can this not be done with inner joins this way?
Thanks,
Alex
In SSIS packages, records which do not get processed successfully can be re-directed to different destination for logging or correcting purposes. With 2 additional fields ERROR_CODE and ERROR_COLUMN appended to the dirty row values. To indicate the specific error that has occurred and on which column the error has occurred, I have certain doubts on this error reporting mechanism in SSIS packages.
The ERROR_COLUMN that is reported is not the column name but a number identifying that column uniquely. how can we at run time remap this column number to the exact column name?
Any help on this will be greatly appreciated.
Thanks,
S Suresh
I have a flat text file. All the columns are set to redirect on error. But, when I set it to row, it gives the error column, ErrColumn. Is there a way to display the real column name-the column which has the error.
Thanks.
I would like to get the actual name of the column that has the error. Using the ErrorColumn (int value) I thought there would be some type of lookup collection based on the input (like column names)- if there is, can someone tell me how to get to it?
I have my error output writing to a stored proc, but instead of "32226" as the column name, I need to have the actual name of the column. I am going from Flat File to OLE DB Destination. I have a Script Component getting the output to write to my sproc, and I just need to get the column name.
Suggestions?? Thanks
Hi,
I have just started learning SSIS. I have created a new package which is as follows :
SOURCE QUERY ----> Derived Column ------> Destination Customer Info
Source Fields are
FirstName
LastName
OrgCode
Phone
Ref1
The Derived column is adding a new Column name FullName and the friendly expression for it is FirstName + "Null" + LastName
Destination has all the columns are same as source columns with similar datatypes.
When i start the debugging process i get the following error:
[Destination - CustomerInfo [29]] Error: Column "FullName" cannot be found at the datasource.
[Destination - CustomerInfo [29]] Error: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
[DTS.Pipeline] Error: component "Destination - CustomerInfo" (29) failed the pre-execute phase and returned error code 0xC0202025.
Please let me know where i am going wrong.
Thanks
Hello
I am trying to update a column within a table. I need to change all the (null) to yes. But I keep seeing Error: 0 record(s) affected. What is wrong with my syntax.
My table name: Cat_B
Column: Blog
Current cell data: (null)
Update to: yes
This is the syntax I have tried:
UPDATE Cat_B
SET Blog = 'yes'
Where Blog = '(null)'
Thanks
Lynn
I'm using SQL 2005 Server Management Studio -
I go to the Northwind database - new query window and paste this code, I just found on this forum, to find the Identity column:SELECT C.name AS Colname, UPPER(U.name) AS Coltype, C.status AS Cstatus, C.ColId, C.Id AS Cid, C.length, C.xprec, C.xscale FROM syscolumns C JOIN sys.tables O ON C.id = O.object_id JOIN systypes U ON C.xusertype = U.xusertype WHERE O.name = 'Fred' AND C.status = 128 ORDER BY C.colid SELECT C.name AS Colname, UPPER(U.name) AS Coltype, C.status AS Cstatus, C.ColId, C.Id AS Cid, C.length, C.xprec, C.xscale FROM syscolumns C JOIN sys.tables O ON C.id = O.object_id JOIN systypes U ON C.xusertype = U.xusertype WHERE O.name = 'Products' AND C.status = 128 ORDER BY C.colid
However, I get an error message saying:Invalid object name 'sys.tables'.
What might I be missing here?
Hi ,
I have Three Table
1- Student m <----- > m 2 - Exam 3- Registeration
Std_ID E_ID Std_ID
Std_FName E_Name E_ID
Reg_Date
------------------------------------------------------------------------------------------------------------------------------------------
Ok... now ... I create StoredProcedure to Return values ( Std_FName , E_exam , Reg_Date )ALTER PROCEDURE dbo.StdExamInfo
@StdNumber as int
AS
/* SET NOCOUNT ON */select Std_FName, Reg_Date, E_Name
from Student inner join Registeration
on Student.Std_ID = Registeration.Std_IDinner join Exam
on Registeration.E_ID = Exam.E_IDwhere Std_ID = @StdNumber
RETURN
but it does't work I have this error message ( Ambiguous column name )
sorry for this long message
I get the following error:
ADO error: Inavlid column name 'Alias1'
in the following query:
SELECT LastName + ', ' + FirstName AS Alias1, CustomerID + '-' + Alias1 AS Alias2
FROM Customer
To remove the error I have to substitute "Alias1" with "LastName + ', ' + FirstName" but doing this in complicated queries with many aliases for long complicated calaculated fields becomes a nightmare. I know it is not possible to use alias names in ORDER BY clause, is
this also true for the SELECT clause?.
Thank you in advance - Rehman