how can i make a customized error message for a wrong input of parameters?
let's say i have a parameter which requires user input of companyID and it should compose of all numbers only. if not followed an error message will be prompted to the user... "please enter numbers only..." or something like that...
please... just wondering if its possible...
Issue #1 I have a report that takes 8 character parameter, A error message needs to popped out if user enters parameter less than 8 character.
Issue #2 I have a report with Tablix. A message needs to display if Tablix returns no Rows.
Hello,
I have a message that is validated using a schema.
If I send the message that is not compliant with the schema, the message is not enqueued on the target queue but it is send back to the Initiator queue and the message_body contains the description of the Error.
On the Initiator queue I have activated a SP that is I used to end the conversation and log the error.
One of the information that I need to log is the original XML message that causes the validation error so I can check it.
It seems that in the moment I'm on this SP, activated when there is something on the Initiator queue I have no memory of the original message or at least I'm not able to find it.
Any hints/helps??
Thank you very much!
M.B.
A user is trying to connect to a server via windows authentication from SQL management studio on her desktop.
The log file on the server gives:
Login failed for user: domain1user1
Error : 18456, Severity: 14, State: 11
The strange thing is that the user in the error above is not the user she's trying to connect as (domain2user2, say).
user2 can remote desktop to the server and log in there.
I know this state implies "Valid login but server access failure".
Has anyone run into this, and what more information would be useful to know? Thanks!
Can anyone give a quick description of the meaning of this message andwhat needs to be done to get a connection.I'm running DBArtisan with SQLServer 2000 client SP4 installed.I also get the same message with MS Enterprise Manager so this iscoming out of the actual ODBC connection attempt.Thanks in advance!
View 1 Replies View RelatedOk so I'm using the Management Studio Express and was able to log in and get into the database server, but I had to click the "options>>" button and change database I wanted to connect to from <<default>> to my database on the server or else I get the "cannot open user database, login failed" error message.Then I right click my database and it gives me the "Cannot open user database. Login failed" error message, even though I already connected to the database to login during the connect screen. Also I'm able to interact with the database using SQL QUERIES in the Management Studio, like adding new tables with it, but if I right click the database and click "add table" I get that error.What gives? I know I have permission since I was able to log on, and modify the database using SQL queries but if use the GUI I can't use it. I can't even right-click select "properties" without getting that error. The reason I want to use the GUI is because I want to right click and use the backup feature of the database.My guess is that Management Studio continues to point to the default database(which gives me that message) after I already logged in, so I have no idea how to change the default database that management studio points to, to the one I do have permission to use. Thanks in advance.
View 1 Replies View RelatedHi,I am using sql server 2005 and i am having table with a column which has unique key constraint.So if the user tries to enter the duplicate value for that particular column and try to save it ,it errors out in runtime..how do i raise the user friendly error message in this DB error, when user tries to save it.Thanks
View 9 Replies View RelatedI would like to password protect my MS Access Database which is being exported to from SQL 2000 using DTS, but when I password protect it, I get an error message stating "The workgroup information file is missing or opened exclusively by another user". The ACCESS file has to be opened exclusively to add password protection. Any suggestions?
View 1 Replies View RelatedHello everybody,I was configuring a SqlDataSource control using SQL Authentication mode.I first added a database file (testdb.mdf) through Solution Explorer-Add New Items. Then through Database Explorer I created a table named "info"Then while configuring the SqlDataSource control I used the SQL Authentication mode and attached the "testdb.mdf" database file.Test Connection showed success. But when I hit the Ok button of the wizard it displayed the following error message:Failed to generate a user instance of SQL Server. Only an integrated connection can generate a user instance.While configuring the SqlDataSource control I clicked "New Connection". Under Data Source section I tried both Microsoft SQL Server and Microsoft SQL Server Database File. And in both the cases I attached a databese file(testdb.mdf). Plz enlighten me on this.Thanks and Regards,Sankar.
View 1 Replies View RelatedHi all,
Can anyone tell me about how to prompt a user to type when running a sql statement through query analyzer.
thanks
Jay
I have created a query that has a "When" and an "And" function.
I know need to make the query run on user input, i want it to ask for the date, then name to run the query
Afternoon...
I have a database for a pretend dvd hire company and need to create a query that uses user input as part of the query.
Ie, select * from dvd where actor = 'Tom Cruise';
The 'Tom Cruise' part of the query needs to be user input every time the query is ran... Can you help?
Many thanks in advance!?
Is it possible to allow user input via a Reporting Services Report? What I mean is could a report be created that would allow someone using the report to enter a number that would be written to the SQL database?
View 1 Replies View Related Hi, Just wondering if I could make sure that "hackers" don't tamper with my querystring - which is a parameter for a SQL query. i.e... Dim ListOfValues as string = request.querystring("listOfValues")
'Output would be this: 324234,5445,554654,45632,SQL command : Delete From table where product_id IN (@ListOfValues)
cmd.paramaters.addwithvalue("@ListOfValues", ListOfValues )
How can I validate it so that hackers can't add any characters other than 'numbers' and ' , ' to the sql parameter? I have tried to tryparse the 'ListOfValues ' as an integer - by replacing "," with "" but an integer overflow occured. Any questions or ideas? Thanks
Hi,
I am new to ASP.NET so pordon me if my questions seems to be stupid.
I was given an assign to develop a ASP that would return results from a SQL server.
The problem is that part of my query to the SQL server comes from the webform
select a.invnum, a.invdate, a.duedate, a.invamt,a.payamt from vpshead a inner join vendors
b on (a.vendnum = b.vendnum) where (a.vendnum = " & user.text & " ) and (b.vendpass = "
& Pass.text & " ) and (a.payflag <> 'V') and ( (a.invamt <> 0) or (a.payamt <> 0) )and (a.chkno = '') order by a.invdate"
As your can tell I am using the user.text and Pass.text in my query which will come from the web form.
I know this is wrong but how else can I do it?
Thanks
To: All,
well here's a problem that I encountered, i got a textbox that is used to store the Date of Birth of a user. So when user keys in something, it is store as a string. However i wish to convert it into a datetime so that i can store it into my database. Anybody know of a way to help? i've tried countless methods but doesn't seem to work. Please give me a hand guys.... Thanks
From: iaciz
Hi there
I want to give dynamic input to the t-sql code in sql analyzer.how do i do that....
Like adding 2 numbers
declare @a integer,@b integer,@c integer
--I dont want to give like this
--set @a = 5
--set @b = 10
set @c = @a + @b
can anyone help me with this
regards
Vic
Vicky
Hi,
I am trying to make a simple stored procedure which I want to take input on every run from end user:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
declare @sku varchar(20)
insert into skua (sku,SumOfQtyNum)
(select sku,sumofqtynum from sku where @sku = sku.sku)
it is working but not asking parameter values
(I want to use passthrough query after that in Access)
thanks
AA
Hello. I'm using SQL query analyzer to run some queries against anSQL2000 DB. Unfortunately, my previous SQL experience is some OralceSQL I took in school.To put it simply, I'm trying to write a query to pull records thatmatch a variable input. In Oracle, I'd use a substitution variablelike this...SELECT * FROM jobs WHERE jobid = &job_id_to_query;Is this possible under SQL2000? Is this only a feature of SQL*Plus?TIARich
View 8 Replies View RelatedI m new to SQL Server. Before this I was using access. In access one can have user inputs easily .. for example
where receivedate=[enter date]
how I can get userinputs in SQL server Query....
Forgive me if it is a dumb question
I want to pull dates from my database that are between to set dates i have written a query that does this which looks like this:
"SELECT OCH_ID, empno, Selected_OCD, Start_Time, End_Time, Selected_OCDay, Selected_DOM, Selected_Month, Selected_Year FROM dbo.ICT_On_Call_Hours WHERE (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) >= CONVERT (datetime, LEFT ('12/02/2007', 2) + '/' + SUBSTRING('12/02/2007', 4, 2) + '/' + RIGHT ('12/02/2007', 4))) AND (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) < CONVERT (datetime, LEFT ('14/02/2007', 2) + '/' + SUBSTRING('14/02/2007', 4, 2) + '/' + RIGHT ('14/02/2007', 4)))"
This works when the dates are included in the statement but when i try and use parameters to pull them in like this:
"SELECT OCH_ID, empno, Selected_OCD, Start_Time, End_Time, Selected_OCDay, Selected_DOM, Selected_Month, Selected_Year FROM dbo.ICT_On_Call_Hours WHERE (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) >= CONVERT (datetime, LEFT ('@Choice1', 2) + '/' + SUBSTRING('@Choice1', 4, 2) + '/' + RIGHT ('@Choice1', 4))) AND (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) < CONVERT (datetime, LEFT ('@Choice2', 2) + '/' + SUBSTRING('@Choice2', 4, 2) + '/' + RIGHT ('@Choice2', 4)))"
I then recieve the following error message why is this?
ERROR -------------------> Syntax error converting datetime from character string.
Any Help would be greatly appreciated thanks
I have a search page that allows users to type/select values contined within the entry they're looking for. My SELECT statement returns columns in a table that get compared to the user input. So if someone selected Status (Open) then all of the 'Open' Request entries should populate the search page. How do I phrase the SELECT statement to compare values if the user gives them, but ignore the fields where no data was input when it's searching? So a search where no values were entered would return every Request Entry instead of an error; no entry.
Thanks!
Hi folks, i am lookin for an option in the QA to take user input while executing a query. just like we do in SQLPLUS:
SELECT * FROM dept WHERE deptno=$abc
here it would ask me for the deptno. I guess it's a very handy feature and we could test our variables and calculations withing the procedures etc.
Is there a way, or any substitute?
Howdy!
I need to convert user's input to SQL statement.
How to code to chage user's input:123, 234 to '123','234'
Hi I have a table(tblA) as follows
Col1--------------col2---------col3-----col4
London------------1131---------299------Barking
Didicot-----------3451---------429------Dansdon
Barking/ASton-----1131---------345------Singleton
Vander/ADon/cam---3907---------299------derby
Null or Blank ---1131---------423------Addington
Expecting the Data should display look like below
London------------1131---------299------Barking
Didicot-----------3451---------429------Dansdon
Barking/ASton-----1131---------345------Singleton
Vander/ADon/cam---3907---------299------derby
But when user change the col2 value (1131) to 113999, this should be changed to all values where col2 is 1131. Please Help
I dont know how to get the newest input for each user from one single table.
Should be a very simple task but i cant work it out.
The table looks like this:
ID (A_I), userID, ip, date(timestamp)
Here is a SQL Fiddle Link with some data also: [URL] ....
I have tried a lot querys like this one:
SELECT userID, ip FROM userips GROUP BY userID ORDER BY ID DESC
But this one does not give me the latest ip which was entered by a user.
I would like to setup a query where the user is firstly prompted to input the information e.g. if they are trying to locate a particular person from a telephone database they would be prompted to enter the surname for that person.
View 4 Replies View Related
Hello,
I'm trying to do something simple that has turned out to be a frustrating problem. I have a field in my report that needs to be populated by user input. Based on this user input, I will use the field in a calculation. The simple solution to me, was to create a custom assembly that has a function that uses Console.Write("Input Data") and Console.readline() to assign the input to a string, and then return that string to the report. This works fine in a test console application, but when I copy and paste the code to my custom assembly, it returns #Error to the report. I've debugged, and found that when I hit F10 on Console.Write("test"); it skips right over it, and nothing happens. It also skips over Console.readline(); with nothing happening. This makes me unable to take the user input and set the textbox equal to that value.
Am I doing this completely wrong? Is there something I'm missing, or just not understanding correcly? It seems like reporting services has to have this option. I'd really appreciate some advice. Thanks!
-Paul
Hello Everybody,
I am sure this has been asked a thousand times before in a thousand different ways, but here goes...
I am in need of the ability to prompt users for a From Date and To Date to insert into a WHERE clause in SQL queries. What is the easiest least painful way of accomplishing this? A great many of our customers utilized SQL Server Express or MSDE, so they do not have the full gambit of SQL tools handy. Believe me when I say that I have searched high and low across the internet for this solution. I was hoping I might be able to accomplish this through VB Script or J Script. Or, anything reasonable.
Thanks in advance for your time and patience,
Rocky Mountain Tech
************* Edited by moderator Adec ***************
Inserted missing < code></ code> tags. Always include such
tags when including code in your postings. Many readers
disregard postings without the code tags.
**************************************************
Hello,
I have a big problem with some piece of code. I am new to C# and ado.net.
My MSDE 2000 is set up and running. But the following code produces the error
(translated from german) like "wrong syntax near the user keyword"
The connection to the database works fine. But trying to create a table or to drop
a table alwas leads to the error. Whats wrong with it?
try
{
SqlConnection myConnection = new SqlConnection( "server=(local);" +
"Trusted_Connection=yes;" +
"database=ergofun; " +
"connection timeout=10");
SqlCommand sqlCommand = new SqlCommand();
sqlCommand.Connection = myConnection;
sqlCommand.CommandText = "CREATE TABLE user ( userid INT," +
"nickname CHAR(20),"+
"password CHAR(20),"+
"birthday DATETIME,"+
"weight INT,"+
"size INT,"+
"puls INT,"+
"name CHAR(20),"+
"surname CHAR(20))";
sqlCommand.Connection.Open();
sqlCommand.ExecuteNonQuery();
sqlCommand.Connection.Close();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
Let's say I have a table with 3 fields: an ID field (primary key, set as an id field, etc.), a Name field (nvarchar50), and an Age field (int). I have a form that has three elements:
DropDownList1: This drop down list contains 3 choices- "=", ">", and "<".
Age: This text box is where someone would enter a number.
Button1: This is the form's submit button.
I want someone to be able to search the database for entries where the Age is either equal to ("="), greater than (">"), or less than ("<") whatever number they enter into TextBox1.
The code-behind is shown below. The part I'm confused about is that if I load this page, the query works the -first- time. Then, if I try to change the parameters in the form and submit it, I get the following error:
"The variable name '@Age' has already been declared. Variable names must be unique within a query batch or stored procedure."
Any help would be appreciated.
Here is what I'm using in my code behind:
protected void Button1_Click(object sender, EventArgs e) { System.Text.StringBuilder sb = new System.Text.StringBuilder(); sb.Append("SELECT * FROM People WHERE Age "); switch (DropDownList1.SelectedValue) { case "=": sb.Append("= "); break; case ">": sb.Append("> "); break; case "<": sb.Append("< "); break; } sb.Append("@Age"); SqlDataSource1.SelectCommand = sb.ToString(); SqlDataSource1.SelectParameters.Add("Age", TypeCode.Int32, Age.Text); }
I know this is an easy one and I know I've read it somewhere, but I can't seem to write the correct format to run correctly. I am trying to build a SELECT statement base on the selected values of a dropdown list on a webform. The selected values will be part of the Table name.. ("client_info" & location_option.selecteditem.value) Can someone show me the correct syntax for adding a form variable into a SELECT statement? Thanks
View 1 Replies View RelatedI'm running asp.net on an XP machine with MSDE 2000 as the database. I want to create a user table with a userid and password. I have a second table that contains details about the user such as home address and phone number etc. When the user first signs up, I want their userid to go into the user table and the user detail table. In my SQL insert command, I can't get @userId to go into both tables. So my question is how do I get the userID to go into both tables or is there a better way of doing this altogether?
Thanks,
Tom