Error Message Using Vista

Jun 9, 2007

Goodday

If I go to Http://localhost/reports I get this error

I have followed the tutorial but still get the error as below. If i go to http:// localhost I get the iis7 wecome page , without a problem.

Sorry I,m a bit new at this , I see in the error message that I must type something in a command line window.

Is this the black blackground box with C:windowssystem32>_ already typed in . Must I type this just after and press entre %systemroot%system32inetsrvAPPCMD.EXE migrate config "Default Web Site/Reports"







Server Error in Application "Default Web Site/Reports"


HTTP Error 500.0 - Internal Server Error

Description: This application is running in an application pool that uses the Integrated .NET mode. This is the preferred mode for running ASP.NET applications on the current and future version of IIS.

In this mode, the application should not specify ASP.NET handler mappings in the <system.web>/<httpHandlers> configuration section. Instead, it should use the <system.webServer>/<handlers> configuration section to configure ASP.NET handler mappings. You have the following options:
1) Migrate the application to work with the Integrated .NET mode (PREFERRED).You can migrate the application configuration, including the contents of the <httpHandlers> configuration section, by using the following from a command line window (the window must be running as Administrator):

%systemroot%system32inetsrvAPPCMD.EXE migrate config "Default Web Site/Reports"

After you migrate your application, it will run in both Classic and Integrated .NET modes, as well as on downlevel platforms.

View 1 Replies


ADVERTISEMENT

ODBC Source Error Message On Vista 64

May 3, 2007

I tried to create an ODBS syste data source but I get this error:



Connection Failed:

SQLState:'01000'

SQL Server Error:10061

[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(Connect())



Connection Failed:

SQLState:'08001'

SQL Server Error:17

[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Server does not Excist or access denied.



Thanks

View 1 Replies View Related

Bad Error Message Connecting To SSCE V3.5 From Orcas Beta 1 In SSMSX SP2 Under Vista

May 12, 2007

I'm receiving a bad error message when attempting to connect to SSCE .sdf files installed by Orcas Beta 1 (e.g., Northwind.sdf from the ...v3.5Samples folder) and created by the Orcas Beta 1 Sync Designer with SQL Management Studio Express SP2 (version 9.00.3042.00).



The message is:

TITLE: Connect to Server
------------------------------

Cannot connect to C:Program FilesMicrosoft SQL Server Compact Editionv3.5SamplesNorthwind.sdf.

------------------------------
ADDITIONAL INFORMATION:

You are trying to access an older version of a SQL Server Compact Edition database. If this is a SQL Server CE 1.0 or 2.0 database, run upgrade.exe. If this is a SQL Server Compact Edition 3.0 or later database, run Compact / Repair. [ Db version = 3505053,Requested version = 3004180,File name = C:Program FilesMicrosoft SQL Server Compact Editionv3.5SamplesNorthwind.sdf ] (SQL Server Compact Edition ADO.NET Data Provider)

------------------------------


Obviously 3505053 is a newer than SSCE 3004180, not earlier. I don't understand why SSMSX SP2 would request a specific version and refuse to open the latest version.



I don't recall having this problem with SSMSX SP2 and VS Orcas March CTP under Windows Server 2003 (March CTP wasn't certified for Vista).



VS Orcas Beta 1's Server Explorer can open the .sdf files and display their content but won't execute DDL commands against them.



There also is what I believe to be a related problem with the Sync Designer failing to add LastEdited and CreatedDate fields to the .sdf files (see Sync Designer/SSCE Version Problems with Orcas Beta 1 in the Sync Services forum.



--rj







VS Orcas

View 6 Replies View Related

[File System Task] Error: An Error Occurred With The Following Error Message: Access To The Path Is Denied

Sep 7, 2007

Hi -

I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:

[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".

Where do I change the security settings?

Thanks - Grace

View 5 Replies View Related

[XML Task] Error: An Error Occurred With The Following Error Message: There Are Multiple Root Elements.

Aug 18, 2006

I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:

[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".

The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:

<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>

There is only 1 ESDU root element and only 1 package element.

Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:

<?xml version="1.0" encoding="UTF-8"?>

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>

<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>

<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>

</xsl:stylesheet>


Its 5th line is the first xsl:template element.

What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.

Thanks!

View 5 Replies View Related

Error When Installed Sql Server 2005 On Vista Home Premium (WMI Error)

Oct 8, 2007

Hi. I've been trying to install Sql Server 2005 express on Vista Home Premium. After the initial files install, I get an error message that says the WMI configuration is not correct. (I'm not at home, so I can't post the exact error code at the moment). Does anyone have any ideas on how I can fix this? Thanks in advance.

View 3 Replies View Related

I Am Getting An Error Message When I Try To Print Using Reporting Services: An Error Occurred During Printing (0x80004005)

May 22, 2007

I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"

View 4 Replies View Related

SQL Server Error Message - Operating System Error 10038: An Operation Was Attempted On Something That Is Not A Socket...

Nov 20, 2006

My apologies...I wasn't for sure where to post an error like this...

Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.

Operating system error 10038: An operation was attempted on something that is not a socket...

Error: 17059, Severity: 18, State: 0

Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.

Error: 17882, Severity: 18, State:

While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.

The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.



Thank you...

...cordell...

View 5 Replies View Related

Error While Calling The Roles.AddUserToRole (error Message: Cannot Resolve Collation Conflict For Equal To Operation)

Feb 5, 2006

Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
 
Error line > Roles.AddUserToRole(user.UserName, "members")
 
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
 
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database:
NOTE: In my database I have create the user “teeluk12� and a role “members�
 
aspnet_UsersInRoles_AddUsersToRoles "/", "teeluk12", "members", "5/02/2006 4:44:33 pm"
 
Once again the code is working on my home computer but not on the server. On the server I'm getting the following error:
 
Server: Msg 446, Level 16, State 9, Procedure aspnet_UsersInRoles_AddUsersToRoles, Line 76
Cannot resolve collation conflict for equal to operation.
 
 
 
Does anybody know what could cause the error?
Could it be some permissions that I didn't set on my server?
 
 
Thanks for my help and suggestions...
Regards,
Gonzal
 

View 9 Replies View Related

Famous Named Pipes Provider, Error 40 Error Message

Oct 18, 2007

Trying to connect to remote server croaktoad.simpli.biz
I have SQL 2005 Developer on XP SP2 , I have disabled my windows firewall. I can ping to my server (croaktoad.simpli.biz) and i get no error message. My remote connection using both TCP/IP and named pipes are checkeed. My SQL Server Browser is running as well.

However when I try to connect using Managment Studio or running SQLCMD /Scroaktoad. simpli.biz /E I get the following error message

C:sqlcmd /Scroaktoad.simpli.biz /E
HResult 0x52E, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [1326].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired


So I've read all the forums for past 2 days and tried everything, nothing changed Any ideas?

View 4 Replies View Related

Error List With Appropriate Error Number And Error Message

Oct 10, 2007

where can i find it?

thanks

View 4 Replies View Related

Error Message: Error 0x800706BE While Loading Package File D:PackagesToradSales.dtsx. The Remote Procedure Call Failed.

Dec 20, 2006

Hello,

I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,

Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.

I´m running the SSIS packages in an 64-bit environment.

Thankful for help with this!

//Patrick

View 3 Replies View Related

SQLSTATE 42000] (Error 7391) Error Message

Nov 5, 2007



I'm not sure if this is the correct group for this messages, but here it is anyway.

I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).

--------------------

Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------




Can someone please explain this message, I have no idea how to fix it or what the cause is.

Thanks

David Davis

View 1 Replies View Related

Vista Error 500

Jun 9, 2007

Goodday

If I go to Http://localhost/reports I get this error

I have followed the tutorial but still get the error as below. If i go to http:// localhost I get the iis7 wecome page , without a problem.

Sorry I,m a bit new at this , I see in the error message that I must type something in a command line window.

Is this the black blackground box with C:windowssystem32>_ already typed in . Must I type this just after and press entre %systemroot%system32inetsrvAPPCMD.EXE migrate config "Default Web Site/Reports"







Server Error in Application "Default Web Site/Reports"


HTTP Error 500.0 - Internal Server Error

Description: This application is running in an application pool that uses the Integrated .NET mode. This is the preferred mode for running ASP.NET applications on the current and future version of IIS.

In this mode, the application should not specify ASP.NET handler mappings in the <system.web>/<httpHandlers> configuration section. Instead, it should use the <system.webServer>/<handlers> configuration section to configure ASP.NET handler mappings. You have the following options:
1) Migrate the application to work with the Integrated .NET mode (PREFERRED).You can migrate the application configuration, including the contents of the <httpHandlers> configuration section, by using the following from a command line window (the window must be running as Administrator):

%systemroot%system32inetsrvAPPCMD.EXE migrate config "Default Web Site/Reports"

After you migrate your application, it will run in both Classic and Integrated .NET modes, as well as on downlevel platforms.

View 13 Replies View Related

SQL 2005 In Vista Error

Nov 29, 2007

Hi,

I have installed SQL 2005(Developer Edition) in Windows vista.
While Installing I have choosen Mixed mode and i gave the password too.The installation was finised successfully. But i cant able to login It says "Login failed". I have applied Sp2 also.

Windows vista home edition
SQL 2005 Developer edition.

What is the problem and How can solve this issue.
Can any one help me..?

Thanks
krishna

View 4 Replies View Related

WMI Config Error On Vista

May 15, 2008

I've not found the answer to this one as it applies to Vista. When installing SQL Server Express which was downloaded from the microsoft website, I get the message "SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine....."
I have tried the wmifix program with no results. Also followed a link to another fix that wasnt appropriate for Vista.
Any help would be appreciated. I am logged in as an administrator, and am running Vista Home Basic.
Thanks for your help.

View 10 Replies View Related

Asp.net 2.0 Vista Sql Express Error

Dec 11, 2006

I am developing a web site in asp.net 2.0 using visual studio 2005 and SQL express.

I tried to add a new Sql database using right click on the App_Data folder and adding the DB.

I get an error that the VS could not find a sql Express installed.

I want to clarify that I have installed the SQL express SP2 for vista version and that I can connect to SQL express db using management studio.

I think it is a vista issue probably that UA.

What can I do?

pls do not recommend the next step I already tried itL

If I create the DB on XP and transfer the project to my vista machine the db is there but I cannot connect to it.

View 4 Replies View Related

SQL Server Connection Error In Vista

Nov 6, 2007

Hi friends....



Plz help me out in the problem mentioned below....

Our server is Windows 2003...Sql server is SQL SERVER2000...I am trying to register this sql server from a local machine...It is showing the erroe


"SQL server registration failed because of the connection failuredisplayed below.Do you wish to register anyway?
SQL Server does not exist or access denied.
ConnectionOpen (Connect()) "


TCP/IP and Named Pipes are the enabled protocols in Both Server and Client network Utilities.







Local machine configuration is

OS- Windows vista Business...
SQL- SQL Server 2000 client



I am able to connect from other local machines which is having windows 2000 as OS.

Also I am able to register from the windows vista machine to another sql server which is having Windows 2000 OS. connection problem is only happening when I am trying to connect to Windows 2003 server.


Please help me as I am having urgency to resolve this.


Thanks in Advance

Sreejith

View 2 Replies View Related

SQl Server 2005 Error 40 On Vista

May 22, 2008

Hi,
I have got error 40 : could not connect to sql server ets while trying to work with vs 2008( so i suppose i have sql server 2005 sp2 preinsatled. I 've tested sql server works in services and tcp/ip enabled. I cann't do anything. aspnet_regsql.exe doesn't works, nor in vs2008 i can't even connect to Northwind.
I have got vista sp1, vs2008, sqlserver seems to work, according to services.
Help, please!
ps sorry for bad english

View 1 Replies View Related

SQL Server 2005 Connection Error On Vista

Jun 6, 2007

Hi,



I have ASP.NET application which connectts to SQL Server 2005 on a server remotely. Everything was working fine untill I installed Vista on my laptop and ran the ASP.NET application. It throws following exception very often :



"System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"



This seems to be Vista specific problem because evrything works fine on XP machine.



Thanks

Mohit

View 3 Replies View Related

Could Not Open A Connection To SQL Server Error On Vista

Feb 25, 2006

Hey,

After install Visual Studio 2005 (with SQL sever express) on recent Vista build, trying to connect to a local sse database file from Data Source Window (accessible from Data/Show data source window) gives this error:

---------------------------
Microsoft Visual Studio
---------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
---------------------------
OK

No issues if we install Visual Studio 2005 on WinXP or W2k3.

Is there any configuration we need to set on vista to allow sql connection?

Thanks,

Mei



---------------------------

View 4 Replies View Related

ODBC Access Driver Error In Vista

Mar 2, 2007

I am migrating my development environment from XP Pro to Vista, and my website is now serving up the following error:



Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC Microsoft Access Driver] Disk or network error.

The code in question is as follows:

set dbConn = Server.CreateObject("ADODB.Connection")
szPath=Server.MapPath("../../../")
szProvider="Driver=Microsoft Access Driver (*.mdb); DBQ=" & szPath
szProvider=szProvider & "database" & szDir & "" & szDB & ".mdb;"
if bDebug then fpDebug.WriteLine("szProvider: " & szProvider)
dbConn.Open szProvider


The error happens on the last line where I try to open the connection. I've tried also using a dbConn.Provider="Microsoft.Jet.OLEDB.4.0" line, to no avail. The item that is passed to the Open command is

Driver=Microsoft Access Driver (*.mdb); DBQ=C:obstuffdatabasedemoHMGA.mdb;

I'm not familiar enough with DNS and IIS to figure this out. Any suggestions -- other than porting over to SQL and .NET? You don't buy a Ferrari when you only drive in a 30 MPH town.

View 7 Replies View Related

Error Installing SQL Server 2005 On Vista

May 15, 2007

Here's the ERRORLOG:

2007-05-15 01:52:05.69 Server Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 6.0 (Build 6000: )

2007-05-15 01:52:05.69 Server (c) 2005 Microsoft Corporation.
2007-05-15 01:52:05.69 Server All rights reserved.
2007-05-15 01:52:05.69 Server Server process ID is 3860.
2007-05-15 01:52:05.69 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-05-15 01:52:05.69 Server This instance of SQL Server last reported using a process ID of 3252 at 5/15/2007 1:51:57 AM (local) 5/15/2007 6:51:57 AM (UTC). This is an informational message only; no user action is required.
2007-05-15 01:52:05.69 Server Registry startup parameters:
2007-05-15 01:52:05.69 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-05-15 01:52:05.69 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-05-15 01:52:05.69 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-05-15 01:52:05.69 Server Command Line Startup Parameters:
2007-05-15 01:52:05.69 Server -m SqlSetup
2007-05-15 01:52:05.69 Server SqlSetup
2007-05-15 01:52:05.69 Server -Q
2007-05-15 01:52:05.69 Server -q SQL_Latin1_General_CP1_CI_AS
2007-05-15 01:52:05.69 Server -T 4022
2007-05-15 01:52:05.69 Server -T 3659
2007-05-15 01:52:05.69 Server -T 3610
2007-05-15 01:52:05.69 Server -T 4010
2007-05-15 01:52:05.70 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-05-15 01:52:05.70 Server Detected 2 CPUs. This is an informational message; no user action is required.
2007-05-15 01:52:05.78 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-05-15 01:52:05.78 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-05-15 01:52:07.85 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-05-15 01:52:07.85 Server Database Mirroring Transport is disabled in the endpoint configuration.
2007-05-15 01:52:07.85 spid5s Warning ******************
2007-05-15 01:52:07.85 spid5s SQL Server started in single-user mode. This an informational message only. No user action is required.
2007-05-15 01:52:07.85 spid5s Starting up database 'master'.
2007-05-15 01:52:08.17 spid5s SQL Trace ID 1 was started by login "sa".
2007-05-15 01:52:08.22 spid5s Starting up database 'mssqlsystemresource'.
2007-05-15 01:52:08.61 spid8s Starting up database 'model'.
2007-05-15 01:52:08.61 Server Error: 17182, Severity: 16, State: 1.
2007-05-15 01:52:08.61 Server TDSSNIClient initialization failed with error 0x2, status code 0x80.
2007-05-15 01:52:08.61 Server Error: 17182, Severity: 16, State: 1.
2007-05-15 01:52:08.61 Server TDSSNIClient initialization failed with error 0x2, status code 0x1.
2007-05-15 01:52:08.61 Server Error: 17826, Severity: 18, State: 3.
2007-05-15 01:52:08.61 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-05-15 01:52:08.61 Server Error: 17120, Severity: 16, State: 1.
2007-05-15 01:52:08.61 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

View 3 Replies View Related

Install SQL Server 2005 Into Vista Error

May 30, 2006

I have installed Feb 2006 CTP Vista Build 5308,but when i install SQL Server 2005,it crashed.

Error Message:

sql server setup could not connect to the database service for server confiurgration.The error was[Microsoft][SQL Native Client]Shared Memory Provider:No process is on the other end of pipe.

And the start menu/All Programe didn't not appear "Microsoft SQL Server".

I really need your help,Thank you.

View 3 Replies View Related

SQL Error Message

Oct 19, 2007

I have a SQL Express database on our server that is used for one of our websites when the website tries to write to the database I get the following error: -
An attempt to attach an auto-named database for file D:lahwebsitesGiants North Walesapp_datadatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
This error is very frustrating and I really can't find a way around it.  I have done the following: -


Deleted the SQL Server Express folders under user preferences

View 3 Replies View Related

Error Message

Feb 29, 2008

Hi,I am trying to write some C# ASP.NET 2.0 code. I have created a web form to send data to my sql server 2005 database. When I compile the application and insert data then click on the submit button I get this error 

"A first chance exception of type
'System.Data.SqlClient.SqlException' occurred in System.Data.dll" I have been trying to solve this for a few days now with no luck, so any help would be appreciated. I'll post below the source code of the web form (addOrder.aspx). It might be worth mentioning that I have created another web form in the same project called addCustomer.aspx. Like addOrder.aspx it is a web form, however it successfully inserts data in the database.  1 <%@ Page Language="C#" MasterPageFile="~/Default.master" Title="Add Order Page" %>
2 <%@ import namespace="System.Data.SqlClient" %>
3 <%@ Import Namespace="System.Data" %>
4 <%@ Import Namespace="System.Web" %>
5 <%@ Import Namespace="System.Configuration"%>
6 <%@ Import Namespace="System.Globalization"%>
7
8 <script runat="server">
9
10 protected void Page_Load(object sender, EventArgs e)
11 {
12
13 }
14
15 protected void sumbitButton_Click(object sender, EventArgs e)
16 {
17 SqlConnection conn;
18 SqlCommand comm;
19 string connectionString =
20 ConfigurationManager.ConnectionStrings[
21 "ShippingSystemConnectionString1"].ConnectionString;
22 conn = new SqlConnection(connectionString);
23 comm = new SqlCommand(
24 "INSERT INTO Order(CustomerID, " +
25 "NumberofItems, DescriptionsofItems, SafeItems) " +
26 "VALUES (@CustomerID, " +
27 "@NumberofItems, @DescriptionsofItems, @SafeItems)", conn);
28 comm.Parameters.Add("@CustomerID", System.Data.SqlDbType.Int);
29 comm.Parameters["@CustomerID"].Value = int.Parse(DropDownList1.SelectedValue);
30 comm.Parameters.Add("@NumberofItems", System.Data.SqlDbType.Int);
31 comm.Parameters["@NumberofItems"].Value = numofitemstxt.Text;
32 comm.Parameters.Add("@DescriptionsofItems", System.Data.SqlDbType.VarChar);
33 comm.Parameters["@DescriptionsofITems"].Value = descofitemstxt.Text;
34 comm.Parameters.Add("@SafeItems", System.Data.SqlDbType.VarChar);
35 comm.Parameters["@SafeItems"].Value = safetxt.Text;
36 try
37 {
38 conn.Open();
39 comm.ExecuteNonQuery();
40 Response.Redirect("Success.aspx");
41 }
42 catch
43 {
44 }
45 finally
46 {
47 conn.Close();
48 }
49 }
50
51
52
53 protected void CustomerIDList_SelectedIndexChanged(object sender, EventArgs e)
54 {
55
56 }
57 </script>
58
59 <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
60 <table style="position: static">
61 <tr>
62 <td style="width: 169px">
63 Customer ID:</td>
64 <td style="width: 100px">
65 <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1"
66 DataTextField="CustomerID" DataValueField="CustomerID" Style="position: static">
67 </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ShippingSystemConnectionString1 %>"
68 SelectCommand="SELECT [CustomerID] FROM [Customer]"></asp:SqlDataSource>
69 </td>
70 <td style="width: 178px">
71 </td>
72 </tr>
73 <tr>
74 <td style="width: 169px">
75 Number of Items:</td>
76 <td style="width: 100px">
77 <asp:TextBox ID="numofitemstxt" runat="server" Style="position: static"></asp:TextBox></td>
78 <td style="width: 178px">
79 <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ControlToValidate="numofitemstxt"
80 ErrorMessage="Number of Items Required" Style="position: static"></asp:RequiredFieldValidator></td>
81 </tr>
82 <tr>
83 <td style="width: 169px">
84 Descriptions of Items:</td>
85 <td style="width: 100px">
86 <asp:TextBox ID="descofitemstxt" runat="server" Style="position: static"></asp:TextBox></td>
87 <td style="width: 178px">
88 <asp:RequiredFieldValidator ID="RequiredFieldValidator4" runat="server" ControlToValidate="descofitemstxt"
89 ErrorMessage="Description Required" Style="position: static"></asp:RequiredFieldValidator></td>
90 </tr>
91 <tr>
92 <td style="width: 169px">
93 Are Items safe:</td>
94 <td style="width: 100px">
95 <asp:TextBox ID="safetxt" runat="server" Style="position: static"></asp:TextBox></td>
96 <td style="width: 178px">
97 <asp:RequiredFieldValidator ID="RequiredFieldValidator5" runat="server" ControlToValidate="safetxt"
98 ErrorMessage="Are Items Safe?" Style="position: static"></asp:RequiredFieldValidator></td>
99 </tr>
100 <tr>
101 <td style="width: 169px">
102 <asp:ValidationSummary ID="ValidationSummary1" runat="server" Style="position: static" />
103 </td>
104 <td style="width: 100px">
105 <asp:Button ID="sumbitButton" runat="server" OnClick="sumbitButton_Click" Style="position: static"
106 Text="Submit" /></td>
107 <td style="width: 178px">
108 </td>
109 </tr>
110 </table>
111 </asp:Content>
112
113
  My order table in SQL server 2005 (express) looks like this:  

View 5 Replies View Related

Sql Error Message

Jan 27, 2004

Hello-

I have the following sql statement which produced an error when I add the order by clause

SQL = "SELECT DISTINCT nc_department.department, Count(nonconformance.department_id) as 'events', ISNULL(SUM(nonconformance.nc_wafer_qty),0) as wafers FROM nc_department LEFT OUTER JOIN nonconformance ON nc_department.department_id = nonconformance.department_id WHERE nc_department.active = '1' GROUP BY nc_department.department ORDER by nc_department.order_id"


This is the error I get:

ORDER BY items must appear in the select list if SELECT DISTINCT is specified.

Any help appreciated

View 10 Replies View Related

Error Message?

Apr 23, 2004

I'm catching a primary constraint error in SQL and don't want to return the SQL error message back to the client. Is there any way to stop this. Thankyou

View 5 Replies View Related

Error Message

May 21, 2004

I need help on this!
When I try to change the data from a table using Web Matrix, then I get this error message.

The table’s data cannot be edited because the table does not contain modifiable columns.

As I need to edit the data’s, how can I solve this?


Thanks for Your Help
Mikel

View 1 Replies View Related

Error Message

Sep 8, 2004

I finally installed MSDE and have the icon in my tray at the bottom of the screen.
When I try to connect to a database using the wizard in the web matrix program I get this message:
Unable to connect
SQL Server does not exist of access denied
Connection Open (Connect ())
What might be wrong??
Thanks for your help I'll get it soon (I hope)
Del Dobbs

View 2 Replies View Related

SQL Error Message

Dec 17, 2004

HI FRIENDS

WHEN I TRY TO RUN A PROGRAM WHICH BINDS A DATAGRID CONTROL TO A SQL SERVER TABLE I GET A ERROR MESSAGE LIKE [SQL EXECEPTION LOGIN FAILED FOR HOMECOMPUTER/ASPNET] . IF U KNOW WHAT MIGHT COZ THE PROBLEM PLEASE TELL ME.

IAM RUNNING THE MICROSOFT SQL SERVER FORM MY HOME COMPUTER I.E (LOCAL) . IS THERE SOME SETTINGS THAT I NEED TO DO BEFORE RUNNING A PAGE WHICH CONNECTS TO THE SQL SERVER.

View 2 Replies View Related

SQL Error Message Help

Jun 13, 2006

I am trying to set a text field as the primary key for a SQL SERVER Express 2005 Database in Visual Studio. I used the following Command:ALTER TABLE Tablename ADD PRIMARY KEY (fieldname);where you substitute table name and fieldname for the appropriate fields. The error message I am getting is:SQL Execution Error.Executed SQL statement: ALTER TABLE Lake ADD PRIMARY KEY(wbic);Error Source .Net SqlClient Data ProviderError Message: Column 'wbic' in table Lake is of a type that is invalid for use as a primary key column or index.Could not create constraint. See previous errors.How can I fix this so any type of field can be a primary key?

View 7 Replies View Related

Help With Error Message

Feb 7, 2002

I am extracting data out of Lotus Notes into an Oracle DB using EM.
I keep getting an error "[Lotus][ODBC Lotus Notes] Data value is not a valid date, time or timestamp" I went ahead and dropped the destination table, and changed all of the "date" columns to varchar's, redefined the transformation, and executed package again, but still get the error. Any ideas?

Thanks!
BV

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved