When configuring error output, I want everything that is good in the row to make it to the destination, and then the offending column that is causing an error to be set to NULL, and then sent to the destination as well. In addition, I want to take the offending column's data, and route it over to an error holding table. I know about the ability to redirect the whole row, but I just sort of want to redirect just that column. For example....
Have a table with 5 columns
col1 int null,
col2 int null,
col3 char(3) null,
col4 bit null,
col5 int null
My data flow loads data from a flat file and has a record that looks like this
1 5 ABC R 3
I want the row to make it to the destination as follows....
1 5 ABC NULL 3
Then the offending data needs to go over to my error table
I would like to get the actual name of the column that has the error. Using the ErrorColumn (int value) I thought there would be some type of lookup collection based on the input (like column names)- if there is, can someone tell me how to get to it?
I have my error output writing to a stored proc, but instead of "32226" as the column name, I need to have the actual name of the column. I am going from Flat File to OLE DB Destination. I have a Script Component getting the output to write to my sproc, and I just need to get the column name.
Iam redirecting the error output of a OLEDB destination component to a script component. My aim is to create a HTML report having the information about the bad records, the error occuring in the rows and the column name that fails. The error output provided two new columns i.e the errorcode and errorcolumn , the errorcolumn value for a bad record gives the linage id for the column, is there a way to derieve the name of the column by using the lineage id?
Here is what I get. Is this an install problem or is this how this software works??
===================================
Error at Data Flow Task [Data Conversion [720]]: An output cannot be added to the outputs collection.
(Microsoft Visual Studio)
===================================
Exception from HRESULT: 0xC020800F (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.InsertOutput(DTSInsertPlacement eInsertPlacement, Int32 lOutputID) at Microsoft.DataTransformationServices.Design.Controls.ComponentMetaDataTreeView.AddOutput()
I'm trying to transfer data from DB2 Database to SQL Server 2005.
Well, i used the OLE DB Source, the Data Conversion Component and the OLE DB Destination component.
I have five Data flows with this configuration above. But I am receiving an error message from one of them.
Please check below the error message:
"[Source Table TARTRATE [1]] Error: The value was too large to fit in the output column "ADJ_RATE_PCT" (60). "
"[Source Table TARTRATE [1]] Error: The "component "Source Table TARTRATE" (1)" failed because error code 0xC02090F8 occurred, and the error row disposition on "output column "ADJ_RATE_PCT" (60)" specifies failure on error. An error occurred on the specified object of the specified component."
I have created a program that imports a csv into the sql server. but during that import I need to track all the errors that occured for some malformed rows. I think I need to use the error output collection of the dataflow components to track the errors. I figured out that every dataflow component has a error output collection along with the data output collection. I want to write those error outputs into a separete database. So, I have created a SQL server data destination component and created a path between derived columns error output and it input collection. But it is not working as expected. can any body help on this?
or can anyone give me any example how to use/handle error output collection in SSIS?
I am stuck with a problem and need your help. As we know, all columns that go to error flow of flat file source connection are displayed as a single column e.g. FlatFileSourceErrorOutputColumn, but my requirement is to extract the first column value from this FlatFileSourceErrorOutputColumn, my data is dilimeted by "|" pipe operator. I have created a script component to deal with this. However if we take FlatFileSourceErrorOutputColumn column as input column in script component, it comes as BLOB data. I wrote below code in transformation script component to extract BLOB data from column in string form and then do a Left function search to take first column out.
When I am running this script component I am getting '??????????' question marks as a result in Row.Pname.
Can anyone please help me understand if I am doing anything wrong in this script or suggest a better way to take the data out?
I appreciate your help.
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Is there a way to ignore a column/variable when the whole result set for the applied filter (where) is null?
Not all clients have data for every variable, i.e. some variables are client specific. There are too many variables and clients to amend the select query every time so I just want to ignore a col if its null.
I hope that makes sense (my inability to describe it might explain my inability to find anything related to it!)
The next step would be to run all clients' data in one go using, I believe, a cursor, but one step at a time!
I have a table with an Identity Column set up. I also have an index on the table that is set to Ignore Duplicate. Identity starts at 1 and is incremented by 1.
So first 5 rows inserted get identity
1
2
3
4
5
If I insert rows that get ignored because of the index with Ignore Duplicate, it is ignored correctly. But, the next row to get inserted will have an identity value of 7.
So, even though the insert was ignored because of the index with Ignore Duplicate, the Identity column was incremented behind the scenes.
Is there a way to make a SP ignore an error?e.g. I'm looping through each database on a server, checking of a tableexists then selecting a value from that table. Now I have a database putonto the server where the table exists but all column names aredifferent, my SP is not interested in this database so when it errorswith invalid column name I want it to move onto the next databse and notdisplay any error message.
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.
I have a stored procedure that does several steps. During the stored proc, error messages are produced when certain conditions warrant. But I want to continue anyway.... ex. in a loop in the proc...
SET @strSQL = 'Update Table1 SET col1 = ''' + @strVariable + '''' EXEC (@strSQL)
--ERROR created by the exec statement.....
When I schedule this as a job, the first error message makes the job fail. How can I force the proc to run completely, even if an error occurs?
That works until it hits a date formatted incorrectly. The date could have blank spaces, double zeros or an invalid month/day/year (e.g. 033986). The command stops with a conversion error and no values are written to the CorrectedDate fields.
Is there a way to have the command skip the invalid dates and continue to write the datetime conversion for the dates that are formatted correctly?
Edit: Forgot to mention this is on SQL Server 2005 (not Express).
The following error has started appearing consistently this week (50-100) times a day. No code has been changed in the database and I ran a trace to identify the procs executed in the time before this error.There is not any errors with the procs and the procs are running correctly. Does anyone know what is causing this and the remedy for this?
Thank You
Michael
DESCRIPTION: Error: 16955, Severity: 16, State: 2 Could not create an acceptable cursor.
I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....
The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
select hierarchy.hiername,devicefail.deviceid ,sum(DATEDIFF(minute,started,ended)) as duration ,100 - SUM(datediff(minute,started,ended))/(672 * 60.0000)*100 AS Uptime from devicefail LEFT JOIN device ON device.deviceid = devicefail.deviceid LEFT JOIN hierarchy ON device.hierlevel = hierarchy.hierlevel where devicefail.started >= '2013-02-01 00:00:00'and devicefail.ended <='2013-02-28 23:59:59' and devicefail.componentid like 201 or devicefail.componentid like 0 group by devicefail.deviceid,hierarchy.hiername,devicefail. componentid order by hiername
I have two queries I would like to combine the output on. they are as follows:
Select substring(WrkSta.[Name],1,2) 'Location' ,count (aexe.ReturnCode) as '# Patched' from WrkSta, AeXEvt_AeX_SWD_Execution aexe where WrkSta.WrkStaId=aexe.WrkStaId and (WrkSta.[Name] like 'ES%' or WrkSta.[Name]like 'EM%' or WrkSta.[Name] like 'EP%' or WrkSta.[Name]like 'AB%' or WrkSta.[Name] like 'SU-NP%' or WrkSta.[Name] like 'ET%') and (aexe.returncode='0' or aexe.returncode ='3010') and aexe.AdvertisementName like 'MS05-035-043%' group by substring (WrkSta.[Name], 1,2)
--- Returns : Location # Patched EP 102 ES 1986 ET 19 AB 174 SU 6 EM 506
and the second one:
Select substring(WrkSta.[Name],1,2) 'Location' ,count (coll.WrkStaId ) as '# Workstation' from WrkSta join AeXNSCollectionMembership coll on WrkSta.WrkStaId=Coll.WrkStaId where coll.CollectionGuid = '38F5DAFC-E09D-49A5-A0FD-370983CA7596' and (WrkSta.[Name] like 'ES%' or WrkSta.[Name]like 'EM%' or WrkSta.[Name] like 'EP%' or WrkSta.[Name]like 'AB%' or WrkSta.[Name] like 'SU-NP%' or WrkSta.[Name] like 'ET%') group by substring (WrkSta.[Name], 1,2)
--- returns:
Location # Workstations EP 178 ES 2299 ET 24 AB 215 SU 13 EM 582
What I need is :
Location # Workstations # Patched EP 178 102 EI 2299 1986 ET 24 19 AB 215 174 SU 13 6 EM 582 582
No mater how I try to do a join to do this in a single query I end up with what looks like a cross-join and # workstations and # Patched jump to huge numbers. I obviously am having a problem understanding how to set up the select statements so that I can do this in one query or am I following the wrong direction and should be trying something else? Once again I appreciate your help in advance....
Hello,I was wondering if anyone can help me figure something out.Is it possible to do a querey in MS SQL server and have the resultsreturned so that each result in each row is preceeded by the columnname?eg. instead of usual output -colName1, colValue1,colName2,colValue2,colName3,colValue3 ?Also I would like to only have this for certain columns ie in theabove example only for columns 2 and 3Thank you! :-)Yas
I have a Data Flow Task that extracts some data using a DataReader Source and loads it to a Raw File Destination. I am getting the following error message:
[DataReader Source [2357]] Error: The value was too large to fit in the output column "LASTCOL" (2558).
I thought that using a Raw File Destination would avoid this type of problem. How can I resolve this issue?
using sql database, i have a smallmoney column. when i enter an amount, 50.00 for example, i have 50.0000 displayed. is there a way to only have 50.00 displayed? same with the smalldatetime, is there a way to limit the display to "mm/dd/yyyy" without the "hh:mms am"
I would like to change the output of a column into a hyperlink however I am not sure that is possible without some further post-processing. I am aware I would have to do:
Code: select '<a href="' + URL + '" target="_blank" nav="web">' + tbl_ID.ID + '</a>' from tbl_ID however this obviously just exports the text <a href="[URL]" target="_blank" nav="web">[ID]</a>
This would work fine if I was exporting it into some sort of HTML table however this doesn't work with excel for example. Is there a way to make this possible or would I have to create a macro in excel to add the url with the ID separately?
I'm importing data from and oracle database to an SQL one through a SSIS package, I'm getting this error: "The output column "earned_hours" has a precision that is not valid. The precision must be between 1 and 38". the package runs but returns this column as NULL values
earned_hours is of type "NUMBER" in oracle (some of the values are decimals), I tried making it numeric(x,y),float or decimal(x,y), but I'm still getting the same results.
does anybody know why is this happening or have a solution for this error?
I use bcp command to output to excel, it works. But I want to format the excel, some column width are too small,user need adjust the column width, otherwise it shows ######.
How can I set columns width when I use bcp output to excel.
Also, can bcp command output to multiple excel sheets and add report title in each excel sheet?
Is there a way to supress output on one column in a SP, using data from the same row?
Like This: SELECT Last, First, DOP, dbo.fnDueDate(DOP, 3, GETDATE()) AS NextQDue, dbo.fnDueDate(DOP, 6, GETDATE()) AS NextNSPDue, DATEADD(m, 1, DOP)AS InitialNSPDue, DATEADD(m, 1, DOP) AS InitialAssessDue, DOT, DisReason, DATEADD(m, 1, DOT) AS DisSummDue, Facility, Active FROM dbo.tblResidents
But which returns null for some of the columns if DOT is not null? DOT is the Termination Date, so the only columns that have any meaning once there is data in the DOT column are DisReason and DisSummDue. Also, if DOT *is* null, then the above columns also have no meaning. I tried several variations of the following, but I can't figure it out
CREATE PROCEDURE [dbo].[spTesting] AS BEGIN SELECT Last, First, DOP, dbo.fnDueDate(DOP, 3, GETDATE()) AS NextQDue, dbo.fnDueDate(DOP, 6, GETDATE()) AS NextNSPDue, DATEADD(m, 1, DOP) AS InitialNSPDue, DATEADD(m, 1, DOP) AS InitialAssessDue, Facility FROM dbo.tblResidents A WHERE DOT IS NULL UNION SELECT Last, First, DOP, DOT, DisReason, DATEADD(m, 1, DOT) AS DisSummDue, Facility FROM dbo.tblResidents I END GO
ID AMT 1001 1234.560 1001 34.560 1001 134.000 1002 45.000 1002 3456.000 1003 5678.999
I need to create a fixed length data file..For example, ID char(6) and amt num(10.3) and sum(23.3)
It should be group and order by ID : 01 Represent ID line and 02 represent amt ( there can be multiple amt records) and 03 represent sum of amt. 01 + ID 02 + AMT 03 + Sum(AMT)
The output should look like this.. How do this either using a t-sql or SSIS?
I am writing a Dataflow task which will take a Particular column from the source table and i am passing the column value in the SQL command property. My SQL Command will look like this,
Select SerialNumber From SerialNumbers Where OrderID = @OrderID
If i go and check the output column in the Input and output properties tab, I am not able to see this serial number column in the output column tree,So i cant able to access this column in the next transformation component.
I have an ODBC connection manager to a Progress database. In that database there is a column declared as a string of 10 characters long. However, some data in this column is actually up to 15 characters long. This makes my DataReader Source fail everytime I try to run my package because it sets the output column like this :
Datatype : Unicode string [DT_WSTR] Length : 10
Is there any way to solve this without changing the datatype in the Progress database (that is beyond my control) ?